544 lines
11 KiB
Plaintext
544 lines
11 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||
|
|
/*
|
||
|
|
* Copyright (c) 2014 Protonic Holland
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
#include "imx6q.dtsi"
|
||
|
|
#include "imx6qdl-prti6q.dtsi"
|
||
|
|
#include <dt-bindings/leds/common.h>
|
||
|
|
#include <dt-bindings/sound/fsl-imx-audmux.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "Protonic PRTI6Q board";
|
||
|
|
compatible = "prt,prti6q", "fsl,imx6q";
|
||
|
|
|
||
|
|
memory@10000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x10000000 0xf0000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
backlight_lcd: backlight-lcd {
|
||
|
|
compatible = "pwm-backlight";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_backlight>;
|
||
|
|
pwms = <&pwm1 0 5000000>;
|
||
|
|
brightness-levels = <0 16 64 255>;
|
||
|
|
num-interpolated-steps = <16>;
|
||
|
|
default-brightness-level = <1>;
|
||
|
|
power-supply = <®_3v3>;
|
||
|
|
enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
can_osc: can-osc {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <25000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_leds>;
|
||
|
|
|
||
|
|
led-debug0 {
|
||
|
|
function = LED_FUNCTION_STATUS;
|
||
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "heartbeat";
|
||
|
|
};
|
||
|
|
|
||
|
|
led-debug1 {
|
||
|
|
function = LED_FUNCTION_SD;
|
||
|
|
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "disk-activity";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
panel {
|
||
|
|
compatible = "kyo,tcg121xglp";
|
||
|
|
backlight = <&backlight_lcd>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
panel_in: endpoint {
|
||
|
|
remote-endpoint = <&lvds0_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_1v8: regulator-1v8 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "1v8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_wifi: regulator-wifi {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_wifi_npd>;
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-name = "regulator-WL12xx";
|
||
|
|
startup-delay-us = <70000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sound {
|
||
|
|
compatible = "simple-audio-card";
|
||
|
|
simple-audio-card,name = "prti6q-sgtl5000";
|
||
|
|
simple-audio-card,format = "i2s";
|
||
|
|
simple-audio-card,widgets =
|
||
|
|
"Microphone", "Microphone Jack",
|
||
|
|
"Line", "Line In Jack",
|
||
|
|
"Headphone", "Headphone Jack",
|
||
|
|
"Speaker", "External Speaker";
|
||
|
|
simple-audio-card,routing =
|
||
|
|
"MIC_IN", "Microphone Jack",
|
||
|
|
"LINE_IN", "Line In Jack",
|
||
|
|
"Headphone Jack", "HP_OUT",
|
||
|
|
"External Speaker", "LINE_OUT";
|
||
|
|
|
||
|
|
simple-audio-card,cpu {
|
||
|
|
sound-dai = <&ssi1>;
|
||
|
|
system-clock-frequency = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
simple-audio-card,codec {
|
||
|
|
sound-dai = <&sgtl5000>;
|
||
|
|
bitclock-master;
|
||
|
|
frame-master;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sound-spdif {
|
||
|
|
compatible = "fsl,imx-audio-spdif";
|
||
|
|
model = "imx-spdif";
|
||
|
|
spdif-controller = <&spdif>;
|
||
|
|
spdif-in;
|
||
|
|
spdif-out;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&audmux {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
mux-ssi1 {
|
||
|
|
fsl,audmux-port = <0>;
|
||
|
|
fsl,port-config = <
|
||
|
|
IMX_AUDMUX_V2_PTCR_SYN 0
|
||
|
|
IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
|
||
|
|
IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
|
||
|
|
IMX_AUDMUX_V2_PTCR_TFSDIR 0
|
||
|
|
IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mux-pins3 {
|
||
|
|
fsl,audmux-port = <2>;
|
||
|
|
fsl,port-config = <
|
||
|
|
IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
|
||
|
|
0 IMX_AUDMUX_V2_PDCR_TXRXEN
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&can1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_can1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&can2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_can2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ecspi1 {
|
||
|
|
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
flash@0 {
|
||
|
|
compatible = "jedec,spi-nor";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <20000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ecspi2 {
|
||
|
|
cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
can@0 {
|
||
|
|
compatible = "microchip,mcp2515";
|
||
|
|
reg = <0>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_can3>;
|
||
|
|
clocks = <&can_osc>;
|
||
|
|
interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
spi-max-frequency = <5000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
adc@1 {
|
||
|
|
compatible = "ti,adc128s052";
|
||
|
|
reg = <1>;
|
||
|
|
spi-max-frequency = <2000000>;
|
||
|
|
vref-supply = <®_3v3>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ecspi3 {
|
||
|
|
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_ecspi3>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&fec {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_enet>;
|
||
|
|
phy-mode = "rgmii-id";
|
||
|
|
phy-handle = <&rgmii_phy>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
mdio {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
/* Microchip KSZ9031RNX PHY */
|
||
|
|
rgmii_phy: ethernet-phy@0 {
|
||
|
|
reg = <0>;
|
||
|
|
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
||
|
|
reset-assert-us = <10000>;
|
||
|
|
reset-deassert-us = <300>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&hdmi {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_hdmi>;
|
||
|
|
ddc-i2c-bus = <&i2c2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
sgtl5000: audio-codec@a {
|
||
|
|
compatible = "fsl,sgtl5000";
|
||
|
|
reg = <0xa>;
|
||
|
|
#sound-dai-cells = <0>;
|
||
|
|
clocks = <&clks 201>;
|
||
|
|
VDDA-supply = <®_3v3>;
|
||
|
|
VDDIO-supply = <®_3v3>;
|
||
|
|
VDDD-supply = <®_1v8>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* DDC */
|
||
|
|
&i2c2 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
adc@49 {
|
||
|
|
compatible = "ti,ads1015";
|
||
|
|
reg = <0x49>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
/* can2_l */
|
||
|
|
channel@4 {
|
||
|
|
reg = <4>;
|
||
|
|
ti,gain = <3>;
|
||
|
|
ti,datarate = <3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* can2_h */
|
||
|
|
channel@5 {
|
||
|
|
reg = <5>;
|
||
|
|
ti,gain = <3>;
|
||
|
|
ti,datarate = <3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* can1_l */
|
||
|
|
channel@6 {
|
||
|
|
reg = <6>;
|
||
|
|
ti,gain = <3>;
|
||
|
|
ti,datarate = <3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* can1_h */
|
||
|
|
channel@7 {
|
||
|
|
reg = <7>;
|
||
|
|
ti,gain = <3>;
|
||
|
|
ti,datarate = <3>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm1 {
|
||
|
|
#pwm-cells = <2>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ldb {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
lvds-channel@0 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
port@4 {
|
||
|
|
reg = <4>;
|
||
|
|
|
||
|
|
lvds0_out: endpoint {
|
||
|
|
remote-endpoint = <&panel_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&sata {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&snvs_poweroff {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&spdif {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_spdif>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ssi1 {
|
||
|
|
#sound-dai-cells = <0>;
|
||
|
|
fsl,mode = "ac97-slave";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart5 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg {
|
||
|
|
pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
||
|
|
non-removable;
|
||
|
|
vmmc-supply = <®_wifi>;
|
||
|
|
cap-power-off-card;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
wifi {
|
||
|
|
compatible = "ti,wl1271";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_wifi>;
|
||
|
|
interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ref-clock-frequency = <38400000>;
|
||
|
|
tcxo-clock-frequency = <19200000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
pinctrl_audmux: audmuxgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_backlight: backlightgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_can2: can2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b008
|
||
|
|
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b008
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_can3: can3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_ecspi1: ecspi1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
||
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
||
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
||
|
|
/* CS */
|
||
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_ecspi2: ecspi2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
|
||
|
|
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
|
||
|
|
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
|
||
|
|
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_ecspi2_cs: ecspi2csgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* ADC128S022 CS */
|
||
|
|
MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_ecspi3: ecspi3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
|
||
|
|
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
|
||
|
|
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
|
||
|
|
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_enet: enetgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
|
||
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
|
||
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
|
||
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
|
||
|
|
|
||
|
|
/* Phy reset */
|
||
|
|
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
|
||
|
|
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_hdmi: hdmigrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* NOTE: DDC is done via I2C2, so DON'T
|
||
|
|
* configure DDC pins for HDMI!
|
||
|
|
*/
|
||
|
|
MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* DDC */
|
||
|
|
pinctrl_i2c2: i2c2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_leds: ledsgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
|
||
|
|
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm1: pwm1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_spdif: spdifgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
|
||
|
|
MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart2: uart2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart5: uart5grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usbotg_id: usbotgidgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f058
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
|
||
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
|
||
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
|
||
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
|
||
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
|
||
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wifi: wifigrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* WL12xx IRQ */
|
||
|
|
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wifi_npd: wifinpd {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|