358 lines
7.3 KiB
Plaintext
358 lines
7.3 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||
|
/*
|
||
|
* Device tree file for ZII's RMU2 board
|
||
|
*
|
||
|
* RMU - Remote Modem Unit
|
||
|
*
|
||
|
* Copyright (C) 2019 Zodiac Inflight Innovations
|
||
|
*/
|
||
|
|
||
|
/dts-v1/;
|
||
|
#include <dt-bindings/thermal/thermal.h>
|
||
|
#include "imx7d.dtsi"
|
||
|
|
||
|
/ {
|
||
|
model = "ZII RMU2 Board";
|
||
|
compatible = "zii,imx7d-rmu2", "fsl,imx7d";
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = &uart2;
|
||
|
};
|
||
|
|
||
|
gpio-leds {
|
||
|
compatible = "gpio-leds";
|
||
|
pinctrl-0 = <&pinctrl_leds_debug>;
|
||
|
pinctrl-names = "default";
|
||
|
|
||
|
led-debug {
|
||
|
label = "zii:green:debug1";
|
||
|
gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
|
||
|
linux,default-trigger = "heartbeat";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&cpu0 {
|
||
|
cpu-supply = <&sw1a_reg>;
|
||
|
};
|
||
|
|
||
|
&ecspi1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
||
|
cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
|
||
|
status = "okay";
|
||
|
|
||
|
flash@0 {
|
||
|
compatible = "jedec,spi-nor";
|
||
|
spi-max-frequency = <20000000>;
|
||
|
reg = <0>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&fec1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_enet1>;
|
||
|
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
|
||
|
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
|
||
|
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
|
||
|
assigned-clock-rates = <0>, <100000000>;
|
||
|
phy-mode = "rgmii-id";
|
||
|
phy-handle = <&fec1_phy>;
|
||
|
status = "okay";
|
||
|
|
||
|
mdio {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
fec1_phy: ethernet-phy@0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_enet1_phy_reset>,
|
||
|
<&pinctrl_enet1_phy_interrupt>;
|
||
|
reg = <0>;
|
||
|
interrupt-parent = <&gpio1>;
|
||
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||
|
reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c1 {
|
||
|
clock-frequency = <100000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
status = "okay";
|
||
|
|
||
|
pmic@8 {
|
||
|
compatible = "fsl,pfuze3000";
|
||
|
reg = <0x08>;
|
||
|
|
||
|
regulators {
|
||
|
sw1a_reg: sw1a {
|
||
|
regulator-min-microvolt = <700000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
regulator-ramp-delay = <6250>;
|
||
|
};
|
||
|
|
||
|
sw1c_reg: sw1b {
|
||
|
regulator-min-microvolt = <700000>;
|
||
|
regulator-max-microvolt = <1475000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
regulator-ramp-delay = <6250>;
|
||
|
};
|
||
|
|
||
|
sw2_reg: sw2 {
|
||
|
regulator-min-microvolt = <1500000>;
|
||
|
regulator-max-microvolt = <1850000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
sw3a_reg: sw3 {
|
||
|
regulator-min-microvolt = <900000>;
|
||
|
regulator-max-microvolt = <1650000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
swbst_reg: swbst {
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5150000>;
|
||
|
};
|
||
|
|
||
|
snvs_reg: vsnvs {
|
||
|
regulator-min-microvolt = <1000000>;
|
||
|
regulator-max-microvolt = <3000000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vref_reg: vrefddr {
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen1_reg: vldo1 {
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen2_reg: vldo2 {
|
||
|
regulator-min-microvolt = <800000>;
|
||
|
regulator-max-microvolt = <1550000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen3_reg: vccsd {
|
||
|
regulator-min-microvolt = <2850000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen4_reg: v33 {
|
||
|
regulator-min-microvolt = <2850000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen5_reg: vldo3 {
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen6_reg: vldo4 {
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
eeprom@50 {
|
||
|
compatible = "atmel,24c04";
|
||
|
reg = <0x50>;
|
||
|
};
|
||
|
|
||
|
eeprom@52 {
|
||
|
compatible = "atmel,24c04";
|
||
|
reg = <0x52>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&snvs_rtc {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
|
||
|
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart4 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart4>;
|
||
|
assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
|
||
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
||
|
status = "okay";
|
||
|
|
||
|
mcu {
|
||
|
compatible = "zii,rave-sp-rdu2";
|
||
|
current-speed = <1000000>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
|
||
|
watchdog {
|
||
|
compatible = "zii,rave-sp-watchdog";
|
||
|
};
|
||
|
|
||
|
eeprom@a3 {
|
||
|
compatible = "zii,rave-sp-eeprom";
|
||
|
reg = <0xa3 0x4000>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
zii,eeprom-name = "main-eeprom";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&usbotg2 {
|
||
|
dr_mode = "host";
|
||
|
disable-over-current;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||
|
bus-width = <4>;
|
||
|
no-1-8-v;
|
||
|
no-sdio;
|
||
|
keep-power-in-suspend;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc3 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
||
|
bus-width = <8>;
|
||
|
no-1-8-v;
|
||
|
non-removable;
|
||
|
no-sdio;
|
||
|
no-sd;
|
||
|
keep-power-in-suspend;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&wdog1 {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&iomuxc {
|
||
|
pinctrl_ecspi1: ecspi1grp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2
|
||
|
MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2
|
||
|
MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2
|
||
|
MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_enet1: enet1grp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
|
||
|
MX7D_PAD_SD2_WP__ENET1_MDC 0x3
|
||
|
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
|
||
|
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_enet1_phy_reset: enet1phyresetgrp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14
|
||
|
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c1: i2c1grp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
|
||
|
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_leds_debug: ledsgrp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x59
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
|
||
|
pinctrl_uart2: uart2grp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79
|
||
|
MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart4: uart4grp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x79
|
||
|
MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x79
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc1: usdhc1grp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
|
||
|
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
|
||
|
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
|
||
|
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
|
||
|
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
|
||
|
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc3: usdhc3grp {
|
||
|
fsl,pins = <
|
||
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
|
||
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
|
||
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
|
||
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
|
||
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
|
||
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
|
||
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
|
||
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
|
||
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
|
||
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
|
||
|
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&iomuxc_lpsr {
|
||
|
pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
|
||
|
fsl,phy = <
|
||
|
MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08
|
||
|
>;
|
||
|
};
|
||
|
};
|