342 lines
6.8 KiB
Plaintext
342 lines
6.8 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
/*
|
||
|
|
* Copyright (C) 2020 Manivannan Sadhasivam
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
|
||
|
|
#include "stm32mp157.dtsi"
|
||
|
|
#include "stm32mp15-pinctrl.dtsi"
|
||
|
|
#include "stm32mp15xxac-pinctrl.dtsi"
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/mfd/st,stpmic1.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
aliases {
|
||
|
|
mmc0 = &sdmmc1;
|
||
|
|
serial0 = &uart4;
|
||
|
|
serial1 = &uart7;
|
||
|
|
serial2 = &usart2;
|
||
|
|
spi0 = &spi4;
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
stdout-path = "serial1:115200n8";
|
||
|
|
};
|
||
|
|
|
||
|
|
memory@c0000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0xc0000000 0x10000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
led {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
|
||
|
|
led1 {
|
||
|
|
label = "green:user1";
|
||
|
|
gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "heartbeat";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led2 {
|
||
|
|
label = "green:user2";
|
||
|
|
gpios = <&gpioh 3 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "mmc0";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led3 {
|
||
|
|
label = "green:user3";
|
||
|
|
gpios = <&gpioh 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "mmc1";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led4 {
|
||
|
|
label = "green:user4";
|
||
|
|
gpios = <&gpiof 12 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "none";
|
||
|
|
default-state = "off";
|
||
|
|
panic-indicator;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sd_switch: regulator-sd_switch {
|
||
|
|
compatible = "regulator-gpio";
|
||
|
|
regulator-name = "sd_switch";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <2900000>;
|
||
|
|
regulator-type = "voltage";
|
||
|
|
regulator-always-on;
|
||
|
|
|
||
|
|
gpios = <&gpioa 8 GPIO_ACTIVE_HIGH>;
|
||
|
|
gpios-states = <0>;
|
||
|
|
states = <1800000 0x1>,
|
||
|
|
<2900000 0x0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Only headless mode is supported */
|
||
|
|
&gpu {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* LS-I2C0 */
|
||
|
|
&i2c2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c2_pins_a>;
|
||
|
|
i2c-scl-rising-time-ns = <1000>;
|
||
|
|
i2c-scl-falling-time-ns = <300>;
|
||
|
|
status = "okay";
|
||
|
|
/delete-property/dmas;
|
||
|
|
/delete-property/dma-names;
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c4 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c4_pins_a>;
|
||
|
|
i2c-scl-rising-time-ns = <185>;
|
||
|
|
i2c-scl-falling-time-ns = <20>;
|
||
|
|
status = "okay";
|
||
|
|
/delete-property/dmas;
|
||
|
|
/delete-property/dma-names;
|
||
|
|
|
||
|
|
pmic: stpmic@33 {
|
||
|
|
compatible = "st,stpmic1";
|
||
|
|
reg = <0x33>;
|
||
|
|
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
compatible = "st,stpmic1-regulators";
|
||
|
|
|
||
|
|
ldo1-supply = <&v3v3>;
|
||
|
|
ldo2-supply = <&v3v3>;
|
||
|
|
ldo3-supply = <&vdd_ddr>;
|
||
|
|
ldo5-supply = <&v3v3>;
|
||
|
|
ldo6-supply = <&v3v3>;
|
||
|
|
pwr_sw1-supply = <&bst_out>;
|
||
|
|
pwr_sw2-supply = <&bst_out>;
|
||
|
|
|
||
|
|
vddcore: buck1 {
|
||
|
|
regulator-name = "vddcore";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1350000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-initial-mode = <0>;
|
||
|
|
regulator-over-current-protection;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ddr: buck2 {
|
||
|
|
regulator-name = "vdd_ddr";
|
||
|
|
regulator-min-microvolt = <1500000>;
|
||
|
|
regulator-max-microvolt = <1500000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-initial-mode = <0>;
|
||
|
|
regulator-over-current-protection;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd: buck3 {
|
||
|
|
regulator-name = "vdd";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
st,mask-reset;
|
||
|
|
regulator-initial-mode = <0>;
|
||
|
|
regulator-over-current-protection;
|
||
|
|
};
|
||
|
|
|
||
|
|
v3v3: buck4 {
|
||
|
|
regulator-name = "v3v3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-over-current-protection;
|
||
|
|
regulator-initial-mode = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdda: ldo1 {
|
||
|
|
regulator-name = "vdda";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
interrupts = <IT_CURLIM_LDO1 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
v2v9: ldo2 {
|
||
|
|
regulator-name = "v2v9";
|
||
|
|
regulator-min-microvolt = <2900000>;
|
||
|
|
regulator-max-microvolt = <2900000>;
|
||
|
|
regulator-always-on;
|
||
|
|
interrupts = <IT_CURLIM_LDO2 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vtt_ddr: ldo3 {
|
||
|
|
regulator-name = "vtt_ddr";
|
||
|
|
regulator-min-microvolt = <500000>;
|
||
|
|
regulator-max-microvolt = <750000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-over-current-protection;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_usb: ldo4 {
|
||
|
|
regulator-name = "vdd_usb";
|
||
|
|
interrupts = <IT_CURLIM_LDO4 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_sd: ldo5 {
|
||
|
|
regulator-name = "vdd_sd";
|
||
|
|
regulator-min-microvolt = <2900000>;
|
||
|
|
regulator-max-microvolt = <2900000>;
|
||
|
|
interrupts = <IT_CURLIM_LDO5 0>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
v1v8: ldo6 {
|
||
|
|
regulator-name = "v1v8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
interrupts = <IT_CURLIM_LDO6 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vref_ddr: vref_ddr {
|
||
|
|
regulator-name = "vref_ddr";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
bst_out: boost {
|
||
|
|
regulator-name = "bst_out";
|
||
|
|
interrupts = <IT_OCP_BOOST 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vbus_otg: pwr_sw1 {
|
||
|
|
regulator-name = "vbus_otg";
|
||
|
|
interrupts = <IT_OCP_OTG 0>;
|
||
|
|
regulator-active-discharge = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vbus_sw: pwr_sw2 {
|
||
|
|
regulator-name = "vbus_sw";
|
||
|
|
interrupts = <IT_OCP_SWOUT 0>;
|
||
|
|
regulator-active-discharge = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
onkey {
|
||
|
|
compatible = "st,stpmic1-onkey";
|
||
|
|
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
|
||
|
|
interrupt-names = "onkey-falling", "onkey-rising";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
watchdog {
|
||
|
|
compatible = "st,stpmic1-wdt";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&iwdg2 {
|
||
|
|
timeout-sec = <32>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwr_regulators {
|
||
|
|
vdd-supply = <&vdd>;
|
||
|
|
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&rng1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&rtc {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdmmc1 {
|
||
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
||
|
|
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
|
||
|
|
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
|
||
|
|
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
|
||
|
|
broken-cd;
|
||
|
|
disable-wp;
|
||
|
|
st,sig-dir;
|
||
|
|
st,neg-edge;
|
||
|
|
st,use-ckin;
|
||
|
|
bus-width = <4>;
|
||
|
|
vmmc-supply = <&vdd_sd>;
|
||
|
|
vqmmc-supply = <&sd_switch>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* LS-SPI0 */
|
||
|
|
&spi4 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&spi4_pins_a>;
|
||
|
|
cs-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* BG96 */
|
||
|
|
&usart2 {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&usart2_pins_b>;
|
||
|
|
pinctrl-1 = <&usart2_sleep_pins_b>;
|
||
|
|
st,hw-flow-ctrl;
|
||
|
|
/delete-property/dmas;
|
||
|
|
/delete-property/dma-names;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* LS-UART0 */
|
||
|
|
&uart4 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart4_pins_c>;
|
||
|
|
st,hw-flow-ctrl;
|
||
|
|
/delete-property/dmas;
|
||
|
|
/delete-property/dma-names;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Debug console */
|
||
|
|
&uart7 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart7_pins_b>;
|
||
|
|
/delete-property/dmas;
|
||
|
|
/delete-property/dma-names;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbh_ehci {
|
||
|
|
phys = <&usbphyc_port0>;
|
||
|
|
phy-names = "usb";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg_hs {
|
||
|
|
dr_mode = "peripheral";
|
||
|
|
pinctrl-0 = <&usbotg_hs_pins_a>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
phy-names = "usb2-phy";
|
||
|
|
phys = <&usbphyc_port1 0>;
|
||
|
|
vbus-supply = <&vbus_otg>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbphyc {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbphyc_port0 {
|
||
|
|
phy-supply = <&vdd_usb>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbphyc_port1 {
|
||
|
|
phy-supply = <&vdd_usb>;
|
||
|
|
};
|