729 lines
15 KiB
Plaintext
729 lines
15 KiB
Plaintext
|
// SPDX-License-Identifier: BSD-3-Clause
|
||
|
|
/*
|
||
|
|
* Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "pm8994.dtsi"
|
||
|
|
#include "pmi8994.dtsi"
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/leds/common.h>
|
||
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
clocks {
|
||
|
|
compatible = "simple-bus";
|
||
|
|
|
||
|
|
divclk1_cdc: divclk1 {
|
||
|
|
compatible = "gpio-gate-clock";
|
||
|
|
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
|
||
|
|
#clock-cells = <0>;
|
||
|
|
enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&divclk1_default>;
|
||
|
|
};
|
||
|
|
|
||
|
|
divclk4: divclk4 {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <32768>;
|
||
|
|
clock-output-names = "divclk4";
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&divclk4_pin_a>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
|
||
|
|
key-vol-up {
|
||
|
|
label = "Volume Up";
|
||
|
|
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <KEY_VOLUMEUP>;
|
||
|
|
wakeup-source;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
key-dome {
|
||
|
|
label = "Home";
|
||
|
|
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <KEY_HOME>;
|
||
|
|
wakeup-source;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
irled {
|
||
|
|
compatible = "pwm-ir-tx";
|
||
|
|
pwms = <&pm8994_lpg 1 1000000>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&irled_default>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reserved-memory {
|
||
|
|
memory@88800000 {
|
||
|
|
reg = <0x0 0x88800000 0x0 0x1400000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* This platform has all PIL regions offset by 0x1400000 */
|
||
|
|
/delete-node/ mpss@88800000;
|
||
|
|
mpss_mem: mpss@89c00000 {
|
||
|
|
reg = <0x0 0x89c00000 0x0 0x6200000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ adsp@8ea00000;
|
||
|
|
adsp_mem: adsp@8fe00000 {
|
||
|
|
reg = <0x0 0x8fe00000 0x0 0x1b00000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ slpi@90500000;
|
||
|
|
slpi_mem: slpi@91900000 {
|
||
|
|
reg = <0x0 0x91900000 0x0 0xa00000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ gpu@90f00000;
|
||
|
|
gpu_mem: gpu@92300000 {
|
||
|
|
compatible = "shared-dma-pool";
|
||
|
|
reg = <0x0 0x92300000 0x0 0x2000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ venus@91000000;
|
||
|
|
venus_mem: venus@92400000 {
|
||
|
|
reg = <0x0 0x92400000 0x0 0x500000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
ramoops@92900000 {
|
||
|
|
compatible = "ramoops";
|
||
|
|
reg = <0x0 0x92900000 0x0 0x100000>;
|
||
|
|
no-map;
|
||
|
|
|
||
|
|
record-size = <0x8000>;
|
||
|
|
console-size = <0x80000>;
|
||
|
|
ftrace-size = <0x20000>;
|
||
|
|
pmsg-size = <0x40000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ rmtfs;
|
||
|
|
rmtfs@f6c00000 {
|
||
|
|
compatible = "qcom,rmtfs-mem";
|
||
|
|
reg = <0 0xf6c00000 0 0x200000>;
|
||
|
|
no-map;
|
||
|
|
|
||
|
|
qcom,client-id = <1>;
|
||
|
|
qcom,vmid = <15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ mba@91500000;
|
||
|
|
mba_mem: mba@f6f00000 {
|
||
|
|
reg = <0x0 0xf6f00000 0x0 0x100000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vph_pwr: vph-pwr-regulator {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vph_pwr";
|
||
|
|
regulator-min-microvolt = <3800000>;
|
||
|
|
regulator-max-microvolt = <3800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_3v2_tp: vdd-3v2-tp {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vdd_3v2_tp";
|
||
|
|
regulator-min-microvolt = <3200000>;
|
||
|
|
regulator-max-microvolt = <3200000>;
|
||
|
|
startup-delay-us = <4000>;
|
||
|
|
vin-supply = <&vph_pwr>;
|
||
|
|
|
||
|
|
gpio = <&tlmm 73 0>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_3v3: rome-vreg {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vdd_3v3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
startup-delay-us = <4000>;
|
||
|
|
vin-supply = <&vph_pwr_bbyp>;
|
||
|
|
|
||
|
|
gpio = <&pm8994_gpios 9 0>;
|
||
|
|
enable-active-high;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&rome_enable_default>;
|
||
|
|
|
||
|
|
/* Required by QCA6174a - vddpe-3v3 */
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* WL_EN pin defined as a fixed regulator */
|
||
|
|
wlan_en: wlan-en-1-8v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "wlan-en-regulator";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
|
||
|
|
gpio = <&pm8994_gpios 8 0>;
|
||
|
|
/* WLAN card specific delay */
|
||
|
|
startup-delay-us = <70000>;
|
||
|
|
enable-active-high;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&wlan_en_default>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&adsp_pil {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp2_i2c2 {
|
||
|
|
status = "okay";
|
||
|
|
label = "NFC_I2C";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
nfc: pn548@28 {
|
||
|
|
compatible = "nxp,nxp-nci-i2c";
|
||
|
|
|
||
|
|
reg = <0x28>;
|
||
|
|
|
||
|
|
interrupt-parent = <&tlmm>;
|
||
|
|
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
|
||
|
|
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||
|
|
firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&nfc_default>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp2_i2c3 {
|
||
|
|
status = "okay";
|
||
|
|
label = "TYPEC_I2C";
|
||
|
|
|
||
|
|
typec: tusb320l@47 {
|
||
|
|
compatible = "ti,tusb320l";
|
||
|
|
reg = <0x47>;
|
||
|
|
interrupt-parent = <&tlmm>;
|
||
|
|
interrupts = <63 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp2_i2c6 {
|
||
|
|
status = "okay";
|
||
|
|
label = "MSM_TS_I2C";
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_uart2 {
|
||
|
|
status = "okay";
|
||
|
|
label = "QCA_UART";
|
||
|
|
|
||
|
|
bluetooth: bluetooth {
|
||
|
|
compatible = "qcom,qca6174-bt";
|
||
|
|
|
||
|
|
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
|
||
|
|
clocks = <&divclk4>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi0 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdd-supply = <&vreg_l2a_1p25>;
|
||
|
|
vddio-supply = <&vreg_l14a_1p8>;
|
||
|
|
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
|
||
|
|
pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi0_out {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
data-lanes = <0 1 2 3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi0_phy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vcca-supply = <&vreg_l28a_0p925>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmcc {
|
||
|
|
vdd-gfx-supply = <&vdd_gfx>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mss_pil {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pll-supply = <&vreg_l12a_1p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie0 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
/* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */
|
||
|
|
vddpe-3v3-supply = <&wlan_en>;
|
||
|
|
vdda-supply = <&vreg_l28a_0p925>;
|
||
|
|
|
||
|
|
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
|
||
|
|
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie_phy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vreg_l28a_0p925>;
|
||
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_resin {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_lpg {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
qcom,power-source = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_lpg {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
qcom,power-source = <1>;
|
||
|
|
|
||
|
|
multi-led {
|
||
|
|
color = <LED_COLOR_ID_RGB>;
|
||
|
|
function = LED_FUNCTION_STATUS;
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
led@1 {
|
||
|
|
reg = <1>;
|
||
|
|
color = <LED_COLOR_ID_BLUE>;
|
||
|
|
};
|
||
|
|
|
||
|
|
led@2 {
|
||
|
|
reg = <2>;
|
||
|
|
color = <LED_COLOR_ID_GREEN>;
|
||
|
|
};
|
||
|
|
|
||
|
|
led@3 {
|
||
|
|
reg = <3>;
|
||
|
|
color = <LED_COLOR_ID_RED>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&slpi_pil {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
px-supply = <&vreg_lvs2a_1p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3 {
|
||
|
|
status = "okay";
|
||
|
|
extcon = <&typec>;
|
||
|
|
|
||
|
|
qcom,select-utmi-as-pipe-clk;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3_dwc3 {
|
||
|
|
extcon = <&typec>;
|
||
|
|
|
||
|
|
/* usb3-phy is not used on this device */
|
||
|
|
phys = <&hsusb_phy1>;
|
||
|
|
phy-names = "usb2-phy";
|
||
|
|
|
||
|
|
maximum-speed = "high-speed";
|
||
|
|
snps,is-utmi-l1-suspend;
|
||
|
|
snps,usb2-gadget-lpm-disable;
|
||
|
|
snps,hird-threshold = /bits/ 8 <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&hsusb_phy1 {
|
||
|
|
status = "okay";
|
||
|
|
extcon = <&typec>;
|
||
|
|
|
||
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufshc {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
||
|
|
vccq-supply = <&vreg_l25a_1p2>;
|
||
|
|
vccq2-supply = <&vreg_s4a_1p8>;
|
||
|
|
|
||
|
|
vcc-max-microamp = <600000>;
|
||
|
|
vccq-max-microamp = <450000>;
|
||
|
|
vccq2-max-microamp = <450000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufsphy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vreg_l28a_0p925>;
|
||
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||
|
|
vddp-ref-clk-supply = <&vreg_l25a_1p2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&venus {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&wcd9335 {
|
||
|
|
clock-names = "mclk", "slimbus";
|
||
|
|
clocks = <&divclk1_cdc>,
|
||
|
|
<&rpmcc RPM_SMD_BB_CLK1>;
|
||
|
|
|
||
|
|
vdd-buck-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-rx-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-tx-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-vbat-supply = <&vph_pwr>;
|
||
|
|
vdd-micbias-supply = <&vph_pwr_bbyp>;
|
||
|
|
vdd-io-supply = <&vreg_s4a_1p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&rpm_requests {
|
||
|
|
regulators-0 {
|
||
|
|
compatible = "qcom,rpm-pm8994-regulators";
|
||
|
|
|
||
|
|
vdd_s1-supply = <&vph_pwr>;
|
||
|
|
vdd_s2-supply = <&vph_pwr>;
|
||
|
|
vdd_s3-supply = <&vph_pwr>;
|
||
|
|
vdd_s4-supply = <&vph_pwr>;
|
||
|
|
vdd_s5-supply = <&vph_pwr>;
|
||
|
|
vdd_s6-supply = <&vph_pwr>;
|
||
|
|
vdd_s7-supply = <&vph_pwr>;
|
||
|
|
vdd_s8-supply = <&vph_pwr>;
|
||
|
|
vdd_s9-supply = <&vph_pwr>;
|
||
|
|
vdd_s10-supply = <&vph_pwr>;
|
||
|
|
vdd_s11-supply = <&vph_pwr>;
|
||
|
|
vdd_s12-supply = <&vph_pwr>;
|
||
|
|
vdd_l1-supply = <&vreg_s1b_1p025>;
|
||
|
|
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
|
||
|
|
vdd_l3_l11-supply = <&vreg_s3a_1p3>;
|
||
|
|
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
|
||
|
|
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
|
||
|
|
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
|
||
|
|
vdd_l8_l16_l30-supply = <&vph_pwr>;
|
||
|
|
vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
|
||
|
|
vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
|
||
|
|
vdd_l14_l15-supply = <&vreg_s5a_2p15>;
|
||
|
|
vdd_l17_l29-supply = <&vph_pwr_bbyp>;
|
||
|
|
vdd_l20_l21-supply = <&vph_pwr_bbyp>;
|
||
|
|
vdd_l25-supply = <&vreg_s3a_1p3>;
|
||
|
|
vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
|
||
|
|
|
||
|
|
vreg_s3a_1p3: s3 {
|
||
|
|
regulator-name = "vreg_s3a_1p3";
|
||
|
|
regulator-min-microvolt = <1300000>;
|
||
|
|
regulator-max-microvolt = <1300000>;
|
||
|
|
|
||
|
|
/* Required by QCA6174a - vdd-core */
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
vreg_s4a_1p8: s4 {
|
||
|
|
regulator-name = "vreg_s4a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
|
||
|
|
/* Required by QCA6174a - vddio */
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
vreg_s5a_2p15: s5 {
|
||
|
|
regulator-name = "vreg_s5a_2p15";
|
||
|
|
regulator-min-microvolt = <2150000>;
|
||
|
|
regulator-max-microvolt = <2150000>;
|
||
|
|
};
|
||
|
|
vreg_s7a_0p8: s7 {
|
||
|
|
regulator-name = "vreg_s7a_0p8";
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <800000>;
|
||
|
|
};
|
||
|
|
vreg_l1a_1p0: l1 {
|
||
|
|
regulator-name = "vreg_l1a_1p0";
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
};
|
||
|
|
vreg_l2a_1p25: l2 {
|
||
|
|
regulator-name = "vreg_l2a_1p25";
|
||
|
|
regulator-min-microvolt = <1250000>;
|
||
|
|
regulator-max-microvolt = <1250000>;
|
||
|
|
};
|
||
|
|
vreg_l4a_1p225: l4 {
|
||
|
|
regulator-name = "vreg_l4a_1p225";
|
||
|
|
regulator-min-microvolt = <1225000>;
|
||
|
|
regulator-max-microvolt = <1225000>;
|
||
|
|
};
|
||
|
|
vreg_l6a_1p8: l6 {
|
||
|
|
regulator-name = "vreg_l6a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_l8a_1p8: l8 {
|
||
|
|
regulator-name = "vreg_l8a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_l9a_1p8: l9 {
|
||
|
|
regulator-name = "vreg_l9a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_l10a_1p8: l10 {
|
||
|
|
regulator-name = "vreg_l10a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_l12a_1p8: l12 {
|
||
|
|
regulator-name = "vreg_l12a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
vreg_l13a_2p95: l13 {
|
||
|
|
regulator-name = "vreg_l13a_2p95";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <2950000>;
|
||
|
|
};
|
||
|
|
vreg_l14a_1p8: l14 {
|
||
|
|
regulator-name = "vreg_l14a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_l15a_1p8: l15 {
|
||
|
|
regulator-name = "vreg_l15a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_l16a_2p7: l16 {
|
||
|
|
regulator-name = "vreg_l16a_2p7";
|
||
|
|
regulator-min-microvolt = <2700000>;
|
||
|
|
regulator-max-microvolt = <2700000>;
|
||
|
|
};
|
||
|
|
vreg_l19a_3p3: l19 {
|
||
|
|
regulator-name = "vreg_l19a_3p3";
|
||
|
|
regulator-min-microvolt = <3000000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
};
|
||
|
|
vreg_l20a_2p95: l20 {
|
||
|
|
regulator-name = "vreg_l20a_2p95";
|
||
|
|
regulator-min-microvolt = <2950000>;
|
||
|
|
regulator-max-microvolt = <2950000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
vreg_l21a_2p95: l21 {
|
||
|
|
regulator-name = "vreg_l21a_2p95";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
vreg_l23a_2p8: l23 {
|
||
|
|
regulator-name = "vreg_l23a_2p8";
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
};
|
||
|
|
vreg_l24a_3p075: l24 {
|
||
|
|
regulator-name = "vreg_l24a_3p075";
|
||
|
|
regulator-min-microvolt = <3075000>;
|
||
|
|
regulator-max-microvolt = <3075000>;
|
||
|
|
};
|
||
|
|
vreg_l25a_1p2: l25 {
|
||
|
|
regulator-name = "vreg_l25a_1p2";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
vreg_l27a_1p2: l27 {
|
||
|
|
regulator-name = "vreg_l27a_1p2";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
};
|
||
|
|
vreg_l28a_0p925: l28 {
|
||
|
|
regulator-name = "vreg_l28a_0p925";
|
||
|
|
regulator-min-microvolt = <925000>;
|
||
|
|
regulator-max-microvolt = <925000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
vreg_l30a_1p8: l30 {
|
||
|
|
regulator-name = "vreg_l30a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
|
||
|
|
/* Required by QCA6174a - vddio-xtal */
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
vreg_l32a_1p8: l32 {
|
||
|
|
regulator-name = "vreg_l32a_1p8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_lvs1a_1p8: lvs1 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
vreg_lvs2a_1p8: lvs2 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
regulators-1 {
|
||
|
|
compatible = "qcom,rpm-pmi8994-regulators";
|
||
|
|
|
||
|
|
vdd_s1-supply = <&vph_pwr>;
|
||
|
|
vdd_s2-supply = <&vph_pwr>;
|
||
|
|
vdd_s3-supply = <&vph_pwr>;
|
||
|
|
vdd_bst_byp-supply = <&vph_pwr>;
|
||
|
|
|
||
|
|
vreg_s1b_1p025: s1 {
|
||
|
|
regulator-name = "vreg_s1b_1p025";
|
||
|
|
regulator-min-microvolt = <1025000>;
|
||
|
|
regulator-max-microvolt = <1025000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vph_pwr_bbyp: boost-bypass {
|
||
|
|
regulator-name = "vph_pwr_bbyp";
|
||
|
|
regulator-min-microvolt = <3150000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_spmi_regulators {
|
||
|
|
qcom,saw-reg = <&saw3>;
|
||
|
|
s8 {
|
||
|
|
qcom,saw-slave;
|
||
|
|
};
|
||
|
|
s9 {
|
||
|
|
qcom,saw-slave;
|
||
|
|
};
|
||
|
|
s10 {
|
||
|
|
qcom,saw-slave;
|
||
|
|
};
|
||
|
|
vreg_apc_0p8: s11 {
|
||
|
|
qcom,saw-leader;
|
||
|
|
regulator-name = "vreg_apc_0p8";
|
||
|
|
regulator-min-microvolt = <470000>;
|
||
|
|
regulator-max-microvolt = <1140000>;
|
||
|
|
regulator-max-step-microvolt = <150000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_spmi_regulators {
|
||
|
|
vdd_gfx: s2 {
|
||
|
|
regulator-name = "vdd_gfx";
|
||
|
|
regulator-min-microvolt = <400000>;
|
||
|
|
regulator-max-microvolt = <1015000>;
|
||
|
|
regulator-enable-ramp-delay = <500>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_gpios {
|
||
|
|
irled_default: irled-default-state {
|
||
|
|
pins = "gpio5";
|
||
|
|
function = PMIC_GPIO_FUNC_FUNC1;
|
||
|
|
output-low;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
wlan_en_default: wlan-en-state {
|
||
|
|
pins = "gpio8";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-low;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
rome_enable_default: rome-enable-state {
|
||
|
|
pins = "gpio9";
|
||
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
||
|
|
output-high;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
power-source = <PM8994_GPIO_VPH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
divclk1_default: divclk1-state {
|
||
|
|
pins = "gpio15";
|
||
|
|
function = PMIC_GPIO_FUNC_FUNC1;
|
||
|
|
bias-disable;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
divclk4_pin_a: divclk4-state {
|
||
|
|
pins = "gpio18";
|
||
|
|
function = PMIC_GPIO_FUNC_FUNC2;
|
||
|
|
bias-disable;
|
||
|
|
power-source = <PM8994_GPIO_S4>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&tlmm {
|
||
|
|
mdss_dsi_default: mdss-dsi-default-state {
|
||
|
|
pins = "gpio8";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <8>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
mdss_dsi_sleep: mdss-dsi-sleep-state {
|
||
|
|
pins = "gpio8";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
|
||
|
|
mdss_te_default: mdss-te-default-state {
|
||
|
|
pins = "gpio10";
|
||
|
|
function = "mdp_vsync";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
|
||
|
|
mdss_te_sleep: mdss-te-sleep-state {
|
||
|
|
pins = "gpio10";
|
||
|
|
function = "mdp_vsync";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
|
||
|
|
nfc_default: nfc-default-state {
|
||
|
|
pins = "gpio12", "gpio21";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <16>;
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
};
|