449 lines
8.4 KiB
Plaintext
449 lines
8.4 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
|
||
|
|
#include "msm8998.dtsi"
|
||
|
|
#include "pm8005.dtsi"
|
||
|
|
#include "pm8998.dtsi"
|
||
|
|
#include "pmi8998.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
|
||
|
|
compatible = "qcom,msm8998-mtp", "qcom,msm8998";
|
||
|
|
|
||
|
|
qcom,board-id = <8 0>;
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
serial0 = &blsp2_uart1;
|
||
|
|
serial1 = &blsp1_uart3;
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
stdout-path = "serial0:115200n8";
|
||
|
|
};
|
||
|
|
|
||
|
|
vph_pwr: vph-pwr-regulator {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vph_pwr";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_uart3 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
bluetooth {
|
||
|
|
compatible = "qcom,wcn3990-bt";
|
||
|
|
|
||
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
||
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
||
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
||
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
||
|
|
max-speed = <3200000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_uart3_on {
|
||
|
|
rx-pins {
|
||
|
|
/delete-property/ bias-disable;
|
||
|
|
/*
|
||
|
|
* Configure a pull-up on 45 (RX). This is needed to
|
||
|
|
* avoid garbage data when the TX pin of the Bluetooth
|
||
|
|
* module is in tri-state (module powered off or not
|
||
|
|
* driving the signal yet).
|
||
|
|
*/
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
cts-pins {
|
||
|
|
/delete-property/ bias-disable;
|
||
|
|
/*
|
||
|
|
* Configure a pull-down on 47 (CTS) to match the pull
|
||
|
|
* of the Bluetooth module.
|
||
|
|
*/
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp2_uart1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etf {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm3 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm4 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm5 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm6 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm7 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etm8 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&etr {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&funnel1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&funnel2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&funnel3 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&funnel4 {
|
||
|
|
/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
|
||
|
|
};
|
||
|
|
|
||
|
|
&funnel5 {
|
||
|
|
/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie_phy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8005_regulators {
|
||
|
|
vdd_s1-supply = <&vph_pwr>;
|
||
|
|
|
||
|
|
pm8005_s1: s1 { /* VDD_GFX supply */
|
||
|
|
regulator-min-microvolt = <524000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
regulator-enable-ramp-delay = <500>;
|
||
|
|
|
||
|
|
/* Hack until we rig up the gpu consumer */
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&qusb2phy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&replicator1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&rpm_requests {
|
||
|
|
regulators-0 {
|
||
|
|
compatible = "qcom,rpm-pm8998-regulators";
|
||
|
|
|
||
|
|
vdd_s1-supply = <&vph_pwr>;
|
||
|
|
vdd_s2-supply = <&vph_pwr>;
|
||
|
|
vdd_s3-supply = <&vph_pwr>;
|
||
|
|
vdd_s4-supply = <&vph_pwr>;
|
||
|
|
vdd_s5-supply = <&vph_pwr>;
|
||
|
|
vdd_s6-supply = <&vph_pwr>;
|
||
|
|
vdd_s7-supply = <&vph_pwr>;
|
||
|
|
vdd_s8-supply = <&vph_pwr>;
|
||
|
|
vdd_s9-supply = <&vph_pwr>;
|
||
|
|
vdd_s10-supply = <&vph_pwr>;
|
||
|
|
vdd_s11-supply = <&vph_pwr>;
|
||
|
|
vdd_s12-supply = <&vph_pwr>;
|
||
|
|
vdd_s13-supply = <&vph_pwr>;
|
||
|
|
vdd_l1_l27-supply = <&vreg_s7a_1p025>;
|
||
|
|
vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
|
||
|
|
vdd_l3_l11-supply = <&vreg_s7a_1p025>;
|
||
|
|
vdd_l4_l5-supply = <&vreg_s7a_1p025>;
|
||
|
|
vdd_l6-supply = <&vreg_s5a_2p04>;
|
||
|
|
vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
|
||
|
|
vdd_l9-supply = <&vreg_bob>;
|
||
|
|
vdd_l10_l23_l25-supply = <&vreg_bob>;
|
||
|
|
vdd_l13_l19_l21-supply = <&vreg_bob>;
|
||
|
|
vdd_l16_l28-supply = <&vreg_bob>;
|
||
|
|
vdd_l18_l22-supply = <&vreg_bob>;
|
||
|
|
vdd_l20_l24-supply = <&vreg_bob>;
|
||
|
|
vdd_l26-supply = <&vreg_s3a_1p35>;
|
||
|
|
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
|
||
|
|
|
||
|
|
vreg_s3a_1p35: s3 {
|
||
|
|
regulator-min-microvolt = <1352000>;
|
||
|
|
regulator-max-microvolt = <1352000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s4a_1p8: s4 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s5a_2p04: s5 {
|
||
|
|
regulator-min-microvolt = <1904000>;
|
||
|
|
regulator-max-microvolt = <2040000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s7a_1p025: s7 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <1028000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l1a_0p875: l1 {
|
||
|
|
regulator-min-microvolt = <880000>;
|
||
|
|
regulator-max-microvolt = <880000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l2a_1p2: l2 {
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l3a_1p0: l3 {
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l5a_0p8: l5 {
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l6a_1p8: l6 {
|
||
|
|
regulator-min-microvolt = <1808000>;
|
||
|
|
regulator-max-microvolt = <1808000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l7a_1p8: l7 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l8a_1p2: l8 {
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l9a_1p8: l9 {
|
||
|
|
regulator-min-microvolt = <1808000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l10a_1p8: l10 {
|
||
|
|
regulator-min-microvolt = <1808000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l11a_1p0: l11 {
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l12a_1p8: l12 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l13a_2p95: l13 {
|
||
|
|
regulator-min-microvolt = <1808000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l14a_1p88: l14 {
|
||
|
|
regulator-min-microvolt = <1880000>;
|
||
|
|
regulator-max-microvolt = <1880000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l15a_1p8: l15 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l16a_2p7: l16 {
|
||
|
|
regulator-min-microvolt = <2704000>;
|
||
|
|
regulator-max-microvolt = <2704000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l17a_1p3: l17 {
|
||
|
|
regulator-min-microvolt = <1304000>;
|
||
|
|
regulator-max-microvolt = <1304000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l18a_2p7: l18 {
|
||
|
|
regulator-min-microvolt = <2704000>;
|
||
|
|
regulator-max-microvolt = <2704000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l19a_3p0: l19 {
|
||
|
|
regulator-min-microvolt = <3008000>;
|
||
|
|
regulator-max-microvolt = <3008000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l20a_2p95: l20 {
|
||
|
|
regulator-min-microvolt = <2960000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l21a_2p95: l21 {
|
||
|
|
regulator-min-microvolt = <2960000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
regulator-system-load = <800000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l22a_2p85: l22 {
|
||
|
|
regulator-min-microvolt = <2864000>;
|
||
|
|
regulator-max-microvolt = <2864000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l23a_3p3: l23 {
|
||
|
|
regulator-min-microvolt = <3312000>;
|
||
|
|
regulator-max-microvolt = <3312000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l24a_3p075: l24 {
|
||
|
|
regulator-min-microvolt = <3088000>;
|
||
|
|
regulator-max-microvolt = <3088000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l25a_3p3: l25 {
|
||
|
|
regulator-min-microvolt = <3104000>;
|
||
|
|
regulator-max-microvolt = <3312000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l26a_1p2: l26 {
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l28_3p0: l28 {
|
||
|
|
regulator-min-microvolt = <3008000>;
|
||
|
|
regulator-max-microvolt = <3008000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_lvs1a_1p8: lvs1 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_lvs2a_1p8: lvs2 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
regulators-1 {
|
||
|
|
compatible = "qcom,rpm-pmi8998-regulators";
|
||
|
|
|
||
|
|
vdd_bob-supply = <&vph_pwr>;
|
||
|
|
|
||
|
|
vreg_bob: bob {
|
||
|
|
regulator-min-microvolt = <3312000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&remoteproc_adsp {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&remoteproc_mss {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&remoteproc_slpi {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&tlmm {
|
||
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc2 {
|
||
|
|
status = "okay";
|
||
|
|
cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
vmmc-supply = <&vreg_l21a_2p95>;
|
||
|
|
vqmmc-supply = <&vreg_l13a_2p95>;
|
||
|
|
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&sdc2_on &sdc2_cd>;
|
||
|
|
pinctrl-1 = <&sdc2_off &sdc2_cd>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&stm {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufshc {
|
||
|
|
status = "okay";
|
||
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
||
|
|
vccq-supply = <&vreg_l26a_1p2>;
|
||
|
|
vccq2-supply = <&vreg_s4a_1p8>;
|
||
|
|
vcc-max-microamp = <750000>;
|
||
|
|
vccq-max-microamp = <560000>;
|
||
|
|
vccq2-max-microamp = <750000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufsphy {
|
||
|
|
status = "okay";
|
||
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
||
|
|
vdda-pll-supply = <&vreg_l2a_1p2>;
|
||
|
|
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3_dwc3 {
|
||
|
|
dr_mode = "host"; /* Force to host until we have Type-C hooked up */
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3phy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
||
|
|
vdda-pll-supply = <&vreg_l2a_1p2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&wifi {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||
|
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||
|
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||
|
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||
|
|
};
|