350 lines
8.9 KiB
C
350 lines
8.9 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Elida kd35t133 5.5" MIPI-DSI panel driver
|
||
|
* Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH
|
||
|
*
|
||
|
* based on
|
||
|
*
|
||
|
* Rockteck jh057n00900 5.5" MIPI-DSI panel driver
|
||
|
* Copyright (C) Purism SPC 2019
|
||
|
*/
|
||
|
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <linux/media-bus-format.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
|
||
|
#include <video/display_timing.h>
|
||
|
#include <video/mipi_display.h>
|
||
|
|
||
|
#include <drm/drm_mipi_dsi.h>
|
||
|
#include <drm/drm_modes.h>
|
||
|
#include <drm/drm_panel.h>
|
||
|
|
||
|
/* Manufacturer specific Commands send via DSI */
|
||
|
#define KD35T133_CMD_INTERFACEMODECTRL 0xb0
|
||
|
#define KD35T133_CMD_FRAMERATECTRL 0xb1
|
||
|
#define KD35T133_CMD_DISPLAYINVERSIONCTRL 0xb4
|
||
|
#define KD35T133_CMD_DISPLAYFUNCTIONCTRL 0xb6
|
||
|
#define KD35T133_CMD_POWERCONTROL1 0xc0
|
||
|
#define KD35T133_CMD_POWERCONTROL2 0xc1
|
||
|
#define KD35T133_CMD_VCOMCONTROL 0xc5
|
||
|
#define KD35T133_CMD_POSITIVEGAMMA 0xe0
|
||
|
#define KD35T133_CMD_NEGATIVEGAMMA 0xe1
|
||
|
#define KD35T133_CMD_SETIMAGEFUNCTION 0xe9
|
||
|
#define KD35T133_CMD_ADJUSTCONTROL3 0xf7
|
||
|
|
||
|
struct kd35t133 {
|
||
|
struct device *dev;
|
||
|
struct drm_panel panel;
|
||
|
struct gpio_desc *reset_gpio;
|
||
|
struct regulator *vdd;
|
||
|
struct regulator *iovcc;
|
||
|
enum drm_panel_orientation orientation;
|
||
|
bool prepared;
|
||
|
};
|
||
|
|
||
|
static inline struct kd35t133 *panel_to_kd35t133(struct drm_panel *panel)
|
||
|
{
|
||
|
return container_of(panel, struct kd35t133, panel);
|
||
|
}
|
||
|
|
||
|
static int kd35t133_init_sequence(struct kd35t133 *ctx)
|
||
|
{
|
||
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
||
|
struct device *dev = ctx->dev;
|
||
|
|
||
|
/*
|
||
|
* Init sequence was supplied by the panel vendor with minimal
|
||
|
* documentation.
|
||
|
*/
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_POSITIVEGAMMA,
|
||
|
0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56,
|
||
|
0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_NEGATIVEGAMMA,
|
||
|
0x00, 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34,
|
||
|
0x4d, 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL2, 0x41);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80);
|
||
|
mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x48);
|
||
|
mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_INTERFACEMODECTRL, 0x00);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_FRAMERATECTRL, 0xa0);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYFUNCTIONCTRL,
|
||
|
0x20, 0x02);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_SETIMAGEFUNCTION, 0x00);
|
||
|
mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_ADJUSTCONTROL3,
|
||
|
0xa9, 0x51, 0x2c, 0x82);
|
||
|
mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0);
|
||
|
|
||
|
dev_dbg(dev, "Panel init sequence done\n");
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int kd35t133_unprepare(struct drm_panel *panel)
|
||
|
{
|
||
|
struct kd35t133 *ctx = panel_to_kd35t133(panel);
|
||
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
||
|
int ret;
|
||
|
|
||
|
if (!ctx->prepared)
|
||
|
return 0;
|
||
|
|
||
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
||
|
if (ret < 0)
|
||
|
dev_err(ctx->dev, "failed to set display off: %d\n", ret);
|
||
|
|
||
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
regulator_disable(ctx->iovcc);
|
||
|
regulator_disable(ctx->vdd);
|
||
|
|
||
|
ctx->prepared = false;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int kd35t133_prepare(struct drm_panel *panel)
|
||
|
{
|
||
|
struct kd35t133 *ctx = panel_to_kd35t133(panel);
|
||
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
||
|
int ret;
|
||
|
|
||
|
if (ctx->prepared)
|
||
|
return 0;
|
||
|
|
||
|
dev_dbg(ctx->dev, "Resetting the panel\n");
|
||
|
ret = regulator_enable(ctx->vdd);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ctx->dev, "Failed to enable vdd supply: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = regulator_enable(ctx->iovcc);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
|
||
|
goto disable_vdd;
|
||
|
}
|
||
|
|
||
|
msleep(20);
|
||
|
|
||
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
||
|
usleep_range(10, 20);
|
||
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
||
|
|
||
|
msleep(20);
|
||
|
|
||
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
|
||
|
goto disable_iovcc;
|
||
|
}
|
||
|
|
||
|
msleep(250);
|
||
|
|
||
|
ret = kd35t133_init_sequence(ctx);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
|
||
|
goto disable_iovcc;
|
||
|
}
|
||
|
|
||
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ctx->dev, "Failed to set display on: %d\n", ret);
|
||
|
goto disable_iovcc;
|
||
|
}
|
||
|
|
||
|
msleep(50);
|
||
|
|
||
|
ctx->prepared = true;
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
disable_iovcc:
|
||
|
regulator_disable(ctx->iovcc);
|
||
|
disable_vdd:
|
||
|
regulator_disable(ctx->vdd);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static const struct drm_display_mode default_mode = {
|
||
|
.hdisplay = 320,
|
||
|
.hsync_start = 320 + 130,
|
||
|
.hsync_end = 320 + 130 + 4,
|
||
|
.htotal = 320 + 130 + 4 + 130,
|
||
|
.vdisplay = 480,
|
||
|
.vsync_start = 480 + 2,
|
||
|
.vsync_end = 480 + 2 + 1,
|
||
|
.vtotal = 480 + 2 + 1 + 2,
|
||
|
.clock = 17000,
|
||
|
.width_mm = 42,
|
||
|
.height_mm = 82,
|
||
|
};
|
||
|
|
||
|
static int kd35t133_get_modes(struct drm_panel *panel,
|
||
|
struct drm_connector *connector)
|
||
|
{
|
||
|
struct kd35t133 *ctx = panel_to_kd35t133(panel);
|
||
|
struct drm_display_mode *mode;
|
||
|
|
||
|
mode = drm_mode_duplicate(connector->dev, &default_mode);
|
||
|
if (!mode) {
|
||
|
dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
|
||
|
default_mode.hdisplay, default_mode.vdisplay,
|
||
|
drm_mode_vrefresh(&default_mode));
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
drm_mode_set_name(mode);
|
||
|
|
||
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
||
|
connector->display_info.width_mm = mode->width_mm;
|
||
|
connector->display_info.height_mm = mode->height_mm;
|
||
|
drm_mode_probed_add(connector, mode);
|
||
|
/*
|
||
|
* TODO: Remove once all drm drivers call
|
||
|
* drm_connector_set_orientation_from_panel()
|
||
|
*/
|
||
|
drm_connector_set_panel_orientation(connector, ctx->orientation);
|
||
|
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel)
|
||
|
{
|
||
|
struct kd35t133 *ctx = panel_to_kd35t133(panel);
|
||
|
|
||
|
return ctx->orientation;
|
||
|
}
|
||
|
|
||
|
static const struct drm_panel_funcs kd35t133_funcs = {
|
||
|
.unprepare = kd35t133_unprepare,
|
||
|
.prepare = kd35t133_prepare,
|
||
|
.get_modes = kd35t133_get_modes,
|
||
|
.get_orientation = kd35t133_get_orientation,
|
||
|
};
|
||
|
|
||
|
static int kd35t133_probe(struct mipi_dsi_device *dsi)
|
||
|
{
|
||
|
struct device *dev = &dsi->dev;
|
||
|
struct kd35t133 *ctx;
|
||
|
int ret;
|
||
|
|
||
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
||
|
if (!ctx)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
||
|
if (IS_ERR(ctx->reset_gpio)) {
|
||
|
dev_err(dev, "cannot get reset gpio\n");
|
||
|
return PTR_ERR(ctx->reset_gpio);
|
||
|
}
|
||
|
|
||
|
ctx->vdd = devm_regulator_get(dev, "vdd");
|
||
|
if (IS_ERR(ctx->vdd)) {
|
||
|
ret = PTR_ERR(ctx->vdd);
|
||
|
if (ret != -EPROBE_DEFER)
|
||
|
dev_err(dev, "Failed to request vdd regulator: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ctx->iovcc = devm_regulator_get(dev, "iovcc");
|
||
|
if (IS_ERR(ctx->iovcc)) {
|
||
|
ret = PTR_ERR(ctx->iovcc);
|
||
|
if (ret != -EPROBE_DEFER)
|
||
|
dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
mipi_dsi_set_drvdata(dsi, ctx);
|
||
|
|
||
|
ctx->dev = dev;
|
||
|
|
||
|
dsi->lanes = 1;
|
||
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
||
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
||
|
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET |
|
||
|
MIPI_DSI_CLOCK_NON_CONTINUOUS;
|
||
|
|
||
|
drm_panel_init(&ctx->panel, &dsi->dev, &kd35t133_funcs,
|
||
|
DRM_MODE_CONNECTOR_DSI);
|
||
|
|
||
|
ret = drm_panel_of_backlight(&ctx->panel);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
drm_panel_add(&ctx->panel);
|
||
|
|
||
|
ret = mipi_dsi_attach(dsi);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
|
||
|
drm_panel_remove(&ctx->panel);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void kd35t133_shutdown(struct mipi_dsi_device *dsi)
|
||
|
{
|
||
|
struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi);
|
||
|
int ret;
|
||
|
|
||
|
ret = drm_panel_unprepare(&ctx->panel);
|
||
|
if (ret < 0)
|
||
|
dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
|
||
|
|
||
|
ret = drm_panel_disable(&ctx->panel);
|
||
|
if (ret < 0)
|
||
|
dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
|
||
|
}
|
||
|
|
||
|
static void kd35t133_remove(struct mipi_dsi_device *dsi)
|
||
|
{
|
||
|
struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi);
|
||
|
int ret;
|
||
|
|
||
|
kd35t133_shutdown(dsi);
|
||
|
|
||
|
ret = mipi_dsi_detach(dsi);
|
||
|
if (ret < 0)
|
||
|
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
|
||
|
|
||
|
drm_panel_remove(&ctx->panel);
|
||
|
}
|
||
|
|
||
|
static const struct of_device_id kd35t133_of_match[] = {
|
||
|
{ .compatible = "elida,kd35t133" },
|
||
|
{ /* sentinel */ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, kd35t133_of_match);
|
||
|
|
||
|
static struct mipi_dsi_driver kd35t133_driver = {
|
||
|
.driver = {
|
||
|
.name = "panel-elida-kd35t133",
|
||
|
.of_match_table = kd35t133_of_match,
|
||
|
},
|
||
|
.probe = kd35t133_probe,
|
||
|
.remove = kd35t133_remove,
|
||
|
.shutdown = kd35t133_shutdown,
|
||
|
};
|
||
|
module_mipi_dsi_driver(kd35t133_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
|
||
|
MODULE_DESCRIPTION("DRM driver for Elida kd35t133 MIPI DSI panel");
|
||
|
MODULE_LICENSE("GPL v2");
|