716 lines
20 KiB
C
716 lines
20 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* FXOS8700 - NXP IMU (accelerometer plus magnetometer)
|
||
|
*
|
||
|
* IIO core driver for FXOS8700, with support for I2C/SPI busses
|
||
|
*
|
||
|
* TODO: Buffer, trigger, and IRQ support
|
||
|
*/
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/regmap.h>
|
||
|
#include <linux/acpi.h>
|
||
|
#include <linux/bitops.h>
|
||
|
#include <linux/bitfield.h>
|
||
|
|
||
|
#include <linux/iio/iio.h>
|
||
|
#include <linux/iio/sysfs.h>
|
||
|
|
||
|
#include "fxos8700.h"
|
||
|
|
||
|
/* Register Definitions */
|
||
|
#define FXOS8700_STATUS 0x00
|
||
|
#define FXOS8700_OUT_X_MSB 0x01
|
||
|
#define FXOS8700_OUT_X_LSB 0x02
|
||
|
#define FXOS8700_OUT_Y_MSB 0x03
|
||
|
#define FXOS8700_OUT_Y_LSB 0x04
|
||
|
#define FXOS8700_OUT_Z_MSB 0x05
|
||
|
#define FXOS8700_OUT_Z_LSB 0x06
|
||
|
#define FXOS8700_F_SETUP 0x09
|
||
|
#define FXOS8700_TRIG_CFG 0x0a
|
||
|
#define FXOS8700_SYSMOD 0x0b
|
||
|
#define FXOS8700_INT_SOURCE 0x0c
|
||
|
#define FXOS8700_WHO_AM_I 0x0d
|
||
|
#define FXOS8700_XYZ_DATA_CFG 0x0e
|
||
|
#define FXOS8700_HP_FILTER_CUTOFF 0x0f
|
||
|
#define FXOS8700_PL_STATUS 0x10
|
||
|
#define FXOS8700_PL_CFG 0x11
|
||
|
#define FXOS8700_PL_COUNT 0x12
|
||
|
#define FXOS8700_PL_BF_ZCOMP 0x13
|
||
|
#define FXOS8700_PL_THS_REG 0x14
|
||
|
#define FXOS8700_A_FFMT_CFG 0x15
|
||
|
#define FXOS8700_A_FFMT_SRC 0x16
|
||
|
#define FXOS8700_A_FFMT_THS 0x17
|
||
|
#define FXOS8700_A_FFMT_COUNT 0x18
|
||
|
#define FXOS8700_TRANSIENT_CFG 0x1d
|
||
|
#define FXOS8700_TRANSIENT_SRC 0x1e
|
||
|
#define FXOS8700_TRANSIENT_THS 0x1f
|
||
|
#define FXOS8700_TRANSIENT_COUNT 0x20
|
||
|
#define FXOS8700_PULSE_CFG 0x21
|
||
|
#define FXOS8700_PULSE_SRC 0x22
|
||
|
#define FXOS8700_PULSE_THSX 0x23
|
||
|
#define FXOS8700_PULSE_THSY 0x24
|
||
|
#define FXOS8700_PULSE_THSZ 0x25
|
||
|
#define FXOS8700_PULSE_TMLT 0x26
|
||
|
#define FXOS8700_PULSE_LTCY 0x27
|
||
|
#define FXOS8700_PULSE_WIND 0x28
|
||
|
#define FXOS8700_ASLP_COUNT 0x29
|
||
|
#define FXOS8700_CTRL_REG1 0x2a
|
||
|
#define FXOS8700_CTRL_REG2 0x2b
|
||
|
#define FXOS8700_CTRL_REG3 0x2c
|
||
|
#define FXOS8700_CTRL_REG4 0x2d
|
||
|
#define FXOS8700_CTRL_REG5 0x2e
|
||
|
#define FXOS8700_OFF_X 0x2f
|
||
|
#define FXOS8700_OFF_Y 0x30
|
||
|
#define FXOS8700_OFF_Z 0x31
|
||
|
#define FXOS8700_M_DR_STATUS 0x32
|
||
|
#define FXOS8700_M_OUT_X_MSB 0x33
|
||
|
#define FXOS8700_M_OUT_X_LSB 0x34
|
||
|
#define FXOS8700_M_OUT_Y_MSB 0x35
|
||
|
#define FXOS8700_M_OUT_Y_LSB 0x36
|
||
|
#define FXOS8700_M_OUT_Z_MSB 0x37
|
||
|
#define FXOS8700_M_OUT_Z_LSB 0x38
|
||
|
#define FXOS8700_CMP_X_MSB 0x39
|
||
|
#define FXOS8700_CMP_X_LSB 0x3a
|
||
|
#define FXOS8700_CMP_Y_MSB 0x3b
|
||
|
#define FXOS8700_CMP_Y_LSB 0x3c
|
||
|
#define FXOS8700_CMP_Z_MSB 0x3d
|
||
|
#define FXOS8700_CMP_Z_LSB 0x3e
|
||
|
#define FXOS8700_M_OFF_X_MSB 0x3f
|
||
|
#define FXOS8700_M_OFF_X_LSB 0x40
|
||
|
#define FXOS8700_M_OFF_Y_MSB 0x41
|
||
|
#define FXOS8700_M_OFF_Y_LSB 0x42
|
||
|
#define FXOS8700_M_OFF_Z_MSB 0x43
|
||
|
#define FXOS8700_M_OFF_Z_LSB 0x44
|
||
|
#define FXOS8700_MAX_X_MSB 0x45
|
||
|
#define FXOS8700_MAX_X_LSB 0x46
|
||
|
#define FXOS8700_MAX_Y_MSB 0x47
|
||
|
#define FXOS8700_MAX_Y_LSB 0x48
|
||
|
#define FXOS8700_MAX_Z_MSB 0x49
|
||
|
#define FXOS8700_MAX_Z_LSB 0x4a
|
||
|
#define FXOS8700_MIN_X_MSB 0x4b
|
||
|
#define FXOS8700_MIN_X_LSB 0x4c
|
||
|
#define FXOS8700_MIN_Y_MSB 0x4d
|
||
|
#define FXOS8700_MIN_Y_LSB 0x4e
|
||
|
#define FXOS8700_MIN_Z_MSB 0x4f
|
||
|
#define FXOS8700_MIN_Z_LSB 0x50
|
||
|
#define FXOS8700_TEMP 0x51
|
||
|
#define FXOS8700_M_THS_CFG 0x52
|
||
|
#define FXOS8700_M_THS_SRC 0x53
|
||
|
#define FXOS8700_M_THS_X_MSB 0x54
|
||
|
#define FXOS8700_M_THS_X_LSB 0x55
|
||
|
#define FXOS8700_M_THS_Y_MSB 0x56
|
||
|
#define FXOS8700_M_THS_Y_LSB 0x57
|
||
|
#define FXOS8700_M_THS_Z_MSB 0x58
|
||
|
#define FXOS8700_M_THS_Z_LSB 0x59
|
||
|
#define FXOS8700_M_THS_COUNT 0x5a
|
||
|
#define FXOS8700_M_CTRL_REG1 0x5b
|
||
|
#define FXOS8700_M_CTRL_REG2 0x5c
|
||
|
#define FXOS8700_M_CTRL_REG3 0x5d
|
||
|
#define FXOS8700_M_INT_SRC 0x5e
|
||
|
#define FXOS8700_A_VECM_CFG 0x5f
|
||
|
#define FXOS8700_A_VECM_THS_MSB 0x60
|
||
|
#define FXOS8700_A_VECM_THS_LSB 0x61
|
||
|
#define FXOS8700_A_VECM_CNT 0x62
|
||
|
#define FXOS8700_A_VECM_INITX_MSB 0x63
|
||
|
#define FXOS8700_A_VECM_INITX_LSB 0x64
|
||
|
#define FXOS8700_A_VECM_INITY_MSB 0x65
|
||
|
#define FXOS8700_A_VECM_INITY_LSB 0x66
|
||
|
#define FXOS8700_A_VECM_INITZ_MSB 0x67
|
||
|
#define FXOS8700_A_VECM_INITZ_LSB 0x68
|
||
|
#define FXOS8700_M_VECM_CFG 0x69
|
||
|
#define FXOS8700_M_VECM_THS_MSB 0x6a
|
||
|
#define FXOS8700_M_VECM_THS_LSB 0x6b
|
||
|
#define FXOS8700_M_VECM_CNT 0x6c
|
||
|
#define FXOS8700_M_VECM_INITX_MSB 0x6d
|
||
|
#define FXOS8700_M_VECM_INITX_LSB 0x6e
|
||
|
#define FXOS8700_M_VECM_INITY_MSB 0x6f
|
||
|
#define FXOS8700_M_VECM_INITY_LSB 0x70
|
||
|
#define FXOS8700_M_VECM_INITZ_MSB 0x71
|
||
|
#define FXOS8700_M_VECM_INITZ_LSB 0x72
|
||
|
#define FXOS8700_A_FFMT_THS_X_MSB 0x73
|
||
|
#define FXOS8700_A_FFMT_THS_X_LSB 0x74
|
||
|
#define FXOS8700_A_FFMT_THS_Y_MSB 0x75
|
||
|
#define FXOS8700_A_FFMT_THS_Y_LSB 0x76
|
||
|
#define FXOS8700_A_FFMT_THS_Z_MSB 0x77
|
||
|
#define FXOS8700_A_FFMT_THS_Z_LSB 0x78
|
||
|
#define FXOS8700_A_TRAN_INIT_MSB 0x79
|
||
|
#define FXOS8700_A_TRAN_INIT_LSB_X 0x7a
|
||
|
#define FXOS8700_A_TRAN_INIT_LSB_Y 0x7b
|
||
|
#define FXOS8700_A_TRAN_INIT_LSB_Z 0x7d
|
||
|
#define FXOS8700_TM_NVM_LOCK 0x7e
|
||
|
#define FXOS8700_NVM_DATA0_35 0x80
|
||
|
#define FXOS8700_NVM_DATA_BNK3 0xa4
|
||
|
#define FXOS8700_NVM_DATA_BNK2 0xa5
|
||
|
#define FXOS8700_NVM_DATA_BNK1 0xa6
|
||
|
#define FXOS8700_NVM_DATA_BNK0 0xa7
|
||
|
|
||
|
/* Bit definitions for FXOS8700_CTRL_REG1 */
|
||
|
#define FXOS8700_CTRL_ODR_MAX 0x00
|
||
|
#define FXOS8700_CTRL_ODR_MSK GENMASK(5, 3)
|
||
|
|
||
|
/* Bit definitions for FXOS8700_M_CTRL_REG1 */
|
||
|
#define FXOS8700_HMS_MASK GENMASK(1, 0)
|
||
|
#define FXOS8700_OS_MASK GENMASK(4, 2)
|
||
|
|
||
|
/* Bit definitions for FXOS8700_M_CTRL_REG2 */
|
||
|
#define FXOS8700_MAXMIN_RST BIT(2)
|
||
|
#define FXOS8700_MAXMIN_DIS_THS BIT(3)
|
||
|
#define FXOS8700_MAXMIN_DIS BIT(4)
|
||
|
|
||
|
#define FXOS8700_ACTIVE 0x01
|
||
|
#define FXOS8700_ACTIVE_MIN_USLEEP 4000 /* from table 6 in datasheet */
|
||
|
|
||
|
#define FXOS8700_DEVICE_ID 0xC7
|
||
|
#define FXOS8700_PRE_DEVICE_ID 0xC4
|
||
|
#define FXOS8700_DATA_BUF_SIZE 3
|
||
|
|
||
|
struct fxos8700_data {
|
||
|
struct regmap *regmap;
|
||
|
struct iio_trigger *trig;
|
||
|
__be16 buf[FXOS8700_DATA_BUF_SIZE] __aligned(IIO_DMA_MINALIGN);
|
||
|
};
|
||
|
|
||
|
/* Regmap info */
|
||
|
static const struct regmap_range read_range[] = {
|
||
|
{
|
||
|
.range_min = FXOS8700_STATUS,
|
||
|
.range_max = FXOS8700_A_FFMT_COUNT,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_TRANSIENT_CFG,
|
||
|
.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static const struct regmap_range write_range[] = {
|
||
|
{
|
||
|
.range_min = FXOS8700_F_SETUP,
|
||
|
.range_max = FXOS8700_TRIG_CFG,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_XYZ_DATA_CFG,
|
||
|
.range_max = FXOS8700_HP_FILTER_CUTOFF,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_PL_CFG,
|
||
|
.range_max = FXOS8700_A_FFMT_CFG,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_A_FFMT_THS,
|
||
|
.range_max = FXOS8700_TRANSIENT_CFG,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_TRANSIENT_THS,
|
||
|
.range_max = FXOS8700_PULSE_CFG,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_PULSE_THSX,
|
||
|
.range_max = FXOS8700_OFF_Z,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_M_OFF_X_MSB,
|
||
|
.range_max = FXOS8700_M_OFF_Z_LSB,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_M_THS_CFG,
|
||
|
.range_max = FXOS8700_M_THS_CFG,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_M_THS_X_MSB,
|
||
|
.range_max = FXOS8700_M_CTRL_REG3,
|
||
|
}, {
|
||
|
.range_min = FXOS8700_A_VECM_CFG,
|
||
|
.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static const struct regmap_access_table driver_read_table = {
|
||
|
.yes_ranges = read_range,
|
||
|
.n_yes_ranges = ARRAY_SIZE(read_range),
|
||
|
};
|
||
|
|
||
|
static const struct regmap_access_table driver_write_table = {
|
||
|
.yes_ranges = write_range,
|
||
|
.n_yes_ranges = ARRAY_SIZE(write_range),
|
||
|
};
|
||
|
|
||
|
const struct regmap_config fxos8700_regmap_config = {
|
||
|
.reg_bits = 8,
|
||
|
.val_bits = 8,
|
||
|
.max_register = FXOS8700_NVM_DATA_BNK0,
|
||
|
.rd_table = &driver_read_table,
|
||
|
.wr_table = &driver_write_table,
|
||
|
};
|
||
|
EXPORT_SYMBOL(fxos8700_regmap_config);
|
||
|
|
||
|
#define FXOS8700_CHANNEL(_type, _axis) { \
|
||
|
.type = _type, \
|
||
|
.modified = 1, \
|
||
|
.channel2 = IIO_MOD_##_axis, \
|
||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
||
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
||
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
||
|
}
|
||
|
|
||
|
enum fxos8700_accel_scale_bits {
|
||
|
MODE_2G = 0,
|
||
|
MODE_4G,
|
||
|
MODE_8G,
|
||
|
};
|
||
|
|
||
|
/* scan indexes follow DATA register order */
|
||
|
enum fxos8700_scan_axis {
|
||
|
FXOS8700_SCAN_ACCEL_X = 0,
|
||
|
FXOS8700_SCAN_ACCEL_Y,
|
||
|
FXOS8700_SCAN_ACCEL_Z,
|
||
|
FXOS8700_SCAN_MAGN_X,
|
||
|
FXOS8700_SCAN_MAGN_Y,
|
||
|
FXOS8700_SCAN_MAGN_Z,
|
||
|
FXOS8700_SCAN_RHALL,
|
||
|
FXOS8700_SCAN_TIMESTAMP,
|
||
|
};
|
||
|
|
||
|
enum fxos8700_sensor {
|
||
|
FXOS8700_ACCEL = 0,
|
||
|
FXOS8700_MAGN,
|
||
|
FXOS8700_NUM_SENSORS /* must be last */
|
||
|
};
|
||
|
|
||
|
enum fxos8700_int_pin {
|
||
|
FXOS8700_PIN_INT1,
|
||
|
FXOS8700_PIN_INT2
|
||
|
};
|
||
|
|
||
|
struct fxos8700_scale {
|
||
|
u8 bits;
|
||
|
int uscale;
|
||
|
};
|
||
|
|
||
|
struct fxos8700_odr {
|
||
|
u8 bits;
|
||
|
int odr;
|
||
|
int uodr;
|
||
|
};
|
||
|
|
||
|
static const struct fxos8700_scale fxos8700_accel_scale[] = {
|
||
|
{ MODE_2G, 244},
|
||
|
{ MODE_4G, 488},
|
||
|
{ MODE_8G, 976},
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Accellerometer and magnetometer have the same ODR options, set in the
|
||
|
* CTRL_REG1 register. ODR is halved when using both sensors at once in
|
||
|
* hybrid mode.
|
||
|
*/
|
||
|
static const struct fxos8700_odr fxos8700_odr[] = {
|
||
|
{0x00, 800, 0},
|
||
|
{0x01, 400, 0},
|
||
|
{0x02, 200, 0},
|
||
|
{0x03, 100, 0},
|
||
|
{0x04, 50, 0},
|
||
|
{0x05, 12, 500000},
|
||
|
{0x06, 6, 250000},
|
||
|
{0x07, 1, 562500},
|
||
|
};
|
||
|
|
||
|
static const struct iio_chan_spec fxos8700_channels[] = {
|
||
|
FXOS8700_CHANNEL(IIO_ACCEL, X),
|
||
|
FXOS8700_CHANNEL(IIO_ACCEL, Y),
|
||
|
FXOS8700_CHANNEL(IIO_ACCEL, Z),
|
||
|
FXOS8700_CHANNEL(IIO_MAGN, X),
|
||
|
FXOS8700_CHANNEL(IIO_MAGN, Y),
|
||
|
FXOS8700_CHANNEL(IIO_MAGN, Z),
|
||
|
IIO_CHAN_SOFT_TIMESTAMP(FXOS8700_SCAN_TIMESTAMP),
|
||
|
};
|
||
|
|
||
|
static enum fxos8700_sensor fxos8700_to_sensor(enum iio_chan_type iio_type)
|
||
|
{
|
||
|
switch (iio_type) {
|
||
|
case IIO_ACCEL:
|
||
|
return FXOS8700_ACCEL;
|
||
|
case IIO_MAGN:
|
||
|
return FXOS8700_MAGN;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int fxos8700_set_active_mode(struct fxos8700_data *data,
|
||
|
enum fxos8700_sensor t, bool mode)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, mode);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
usleep_range(FXOS8700_ACTIVE_MIN_USLEEP,
|
||
|
FXOS8700_ACTIVE_MIN_USLEEP + 1000);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int fxos8700_set_scale(struct fxos8700_data *data,
|
||
|
enum fxos8700_sensor t, int uscale)
|
||
|
{
|
||
|
int i, ret, val;
|
||
|
bool active_mode;
|
||
|
static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
|
||
|
struct device *dev = regmap_get_device(data->regmap);
|
||
|
|
||
|
if (t == FXOS8700_MAGN) {
|
||
|
dev_err(dev, "Magnetometer scale is locked at 0.001Gs\n");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* When device is in active mode, it failed to set an ACCEL
|
||
|
* full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG.
|
||
|
* This is not align with the datasheet, but it is a fxos8700
|
||
|
* chip behavier. Set the device in standby mode before setting
|
||
|
* an ACCEL full-scale range.
|
||
|
*/
|
||
|
ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
active_mode = val & FXOS8700_ACTIVE;
|
||
|
if (active_mode) {
|
||
|
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
|
||
|
val & ~FXOS8700_ACTIVE);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < scale_num; i++)
|
||
|
if (fxos8700_accel_scale[i].uscale == uscale)
|
||
|
break;
|
||
|
|
||
|
if (i == scale_num)
|
||
|
return -EINVAL;
|
||
|
|
||
|
ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG,
|
||
|
fxos8700_accel_scale[i].bits);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
return regmap_write(data->regmap, FXOS8700_CTRL_REG1,
|
||
|
active_mode);
|
||
|
}
|
||
|
|
||
|
static int fxos8700_get_scale(struct fxos8700_data *data,
|
||
|
enum fxos8700_sensor t, int *uscale)
|
||
|
{
|
||
|
int i, ret, val;
|
||
|
static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
|
||
|
|
||
|
if (t == FXOS8700_MAGN) {
|
||
|
*uscale = 1000; /* Magnetometer is locked at 0.001Gs */
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
ret = regmap_read(data->regmap, FXOS8700_XYZ_DATA_CFG, &val);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
for (i = 0; i < scale_num; i++) {
|
||
|
if (fxos8700_accel_scale[i].bits == (val & 0x3)) {
|
||
|
*uscale = fxos8700_accel_scale[i].uscale;
|
||
|
return 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int fxos8700_get_data(struct fxos8700_data *data, int chan_type,
|
||
|
int axis, int *val)
|
||
|
{
|
||
|
u8 base, reg;
|
||
|
s16 tmp;
|
||
|
int ret;
|
||
|
|
||
|
/*
|
||
|
* Different register base addresses varies with channel types.
|
||
|
* This bug hasn't been noticed before because using an enum is
|
||
|
* really hard to read. Use an a switch statement to take over that.
|
||
|
*/
|
||
|
switch (chan_type) {
|
||
|
case IIO_ACCEL:
|
||
|
base = FXOS8700_OUT_X_MSB;
|
||
|
break;
|
||
|
case IIO_MAGN:
|
||
|
base = FXOS8700_M_OUT_X_MSB;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/* Block read 6 bytes of device output registers to avoid data loss */
|
||
|
ret = regmap_bulk_read(data->regmap, base, data->buf,
|
||
|
sizeof(data->buf));
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* Convert axis to buffer index */
|
||
|
reg = axis - IIO_MOD_X;
|
||
|
|
||
|
/*
|
||
|
* Convert to native endianness. The accel data and magn data
|
||
|
* are signed, so a forced type conversion is needed.
|
||
|
*/
|
||
|
tmp = be16_to_cpu(data->buf[reg]);
|
||
|
|
||
|
/*
|
||
|
* ACCEL output data registers contain the X-axis, Y-axis, and Z-axis
|
||
|
* 14-bit left-justified sample data and MAGN output data registers
|
||
|
* contain the X-axis, Y-axis, and Z-axis 16-bit sample data. Apply
|
||
|
* a signed 2 bits right shift to the readback raw data from ACCEL
|
||
|
* output data register and keep that from MAGN sensor as the origin.
|
||
|
* Value should be extended to 32 bit.
|
||
|
*/
|
||
|
switch (chan_type) {
|
||
|
case IIO_ACCEL:
|
||
|
tmp = tmp >> 2;
|
||
|
break;
|
||
|
case IIO_MAGN:
|
||
|
/* Nothing to do */
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/* Convert to native endianness */
|
||
|
*val = sign_extend32(tmp, 15);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int fxos8700_set_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
|
||
|
int odr, int uodr)
|
||
|
{
|
||
|
int i, ret, val;
|
||
|
bool active_mode;
|
||
|
static const int odr_num = ARRAY_SIZE(fxos8700_odr);
|
||
|
|
||
|
ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
active_mode = val & FXOS8700_ACTIVE;
|
||
|
|
||
|
if (active_mode) {
|
||
|
/*
|
||
|
* The device must be in standby mode to change any of the
|
||
|
* other fields within CTRL_REG1
|
||
|
*/
|
||
|
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
|
||
|
val & ~FXOS8700_ACTIVE);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < odr_num; i++)
|
||
|
if (fxos8700_odr[i].odr == odr && fxos8700_odr[i].uodr == uodr)
|
||
|
break;
|
||
|
|
||
|
if (i >= odr_num)
|
||
|
return -EINVAL;
|
||
|
|
||
|
val &= ~FXOS8700_CTRL_ODR_MSK;
|
||
|
val |= FIELD_PREP(FXOS8700_CTRL_ODR_MSK, fxos8700_odr[i].bits) | FXOS8700_ACTIVE;
|
||
|
return regmap_write(data->regmap, FXOS8700_CTRL_REG1, val);
|
||
|
}
|
||
|
|
||
|
static int fxos8700_get_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
|
||
|
int *odr, int *uodr)
|
||
|
{
|
||
|
int i, val, ret;
|
||
|
static const int odr_num = ARRAY_SIZE(fxos8700_odr);
|
||
|
|
||
|
ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
val = FIELD_GET(FXOS8700_CTRL_ODR_MSK, val);
|
||
|
|
||
|
for (i = 0; i < odr_num; i++)
|
||
|
if (val == fxos8700_odr[i].bits)
|
||
|
break;
|
||
|
|
||
|
if (i >= odr_num)
|
||
|
return -EINVAL;
|
||
|
|
||
|
*odr = fxos8700_odr[i].odr;
|
||
|
*uodr = fxos8700_odr[i].uodr;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int fxos8700_read_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int *val, int *val2, long mask)
|
||
|
{
|
||
|
int ret;
|
||
|
struct fxos8700_data *data = iio_priv(indio_dev);
|
||
|
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
ret = fxos8700_get_data(data, chan->type, chan->channel2, val);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
return IIO_VAL_INT;
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
*val = 0;
|
||
|
ret = fxos8700_get_scale(data, fxos8700_to_sensor(chan->type),
|
||
|
val2);
|
||
|
return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
|
||
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
||
|
ret = fxos8700_get_odr(data, fxos8700_to_sensor(chan->type),
|
||
|
val, val2);
|
||
|
return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int fxos8700_write_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int val, int val2, long mask)
|
||
|
{
|
||
|
struct fxos8700_data *data = iio_priv(indio_dev);
|
||
|
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
return fxos8700_set_scale(data, fxos8700_to_sensor(chan->type),
|
||
|
val2);
|
||
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
||
|
return fxos8700_set_odr(data, fxos8700_to_sensor(chan->type),
|
||
|
val, val2);
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static IIO_CONST_ATTR(in_accel_sampling_frequency_available,
|
||
|
"1.5625 6.25 12.5 50 100 200 400 800");
|
||
|
static IIO_CONST_ATTR(in_magn_sampling_frequency_available,
|
||
|
"1.5625 6.25 12.5 50 100 200 400 800");
|
||
|
static IIO_CONST_ATTR(in_accel_scale_available, "0.000244 0.000488 0.000976");
|
||
|
static IIO_CONST_ATTR(in_magn_scale_available, "0.001000");
|
||
|
|
||
|
static struct attribute *fxos8700_attrs[] = {
|
||
|
&iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr,
|
||
|
&iio_const_attr_in_magn_sampling_frequency_available.dev_attr.attr,
|
||
|
&iio_const_attr_in_accel_scale_available.dev_attr.attr,
|
||
|
&iio_const_attr_in_magn_scale_available.dev_attr.attr,
|
||
|
NULL,
|
||
|
};
|
||
|
|
||
|
static const struct attribute_group fxos8700_attrs_group = {
|
||
|
.attrs = fxos8700_attrs,
|
||
|
};
|
||
|
|
||
|
static const struct iio_info fxos8700_info = {
|
||
|
.read_raw = fxos8700_read_raw,
|
||
|
.write_raw = fxos8700_write_raw,
|
||
|
.attrs = &fxos8700_attrs_group,
|
||
|
};
|
||
|
|
||
|
static int fxos8700_chip_init(struct fxos8700_data *data, bool use_spi)
|
||
|
{
|
||
|
int ret;
|
||
|
unsigned int val;
|
||
|
struct device *dev = regmap_get_device(data->regmap);
|
||
|
|
||
|
ret = regmap_read(data->regmap, FXOS8700_WHO_AM_I, &val);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Error reading chip id\n");
|
||
|
return ret;
|
||
|
}
|
||
|
if (val != FXOS8700_DEVICE_ID && val != FXOS8700_PRE_DEVICE_ID) {
|
||
|
dev_err(dev, "Wrong chip id, got %x expected %x or %x\n",
|
||
|
val, FXOS8700_DEVICE_ID, FXOS8700_PRE_DEVICE_ID);
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
ret = fxos8700_set_active_mode(data, FXOS8700_ACCEL, true);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = fxos8700_set_active_mode(data, FXOS8700_MAGN, true);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/*
|
||
|
* The device must be in standby mode to change any of the other fields
|
||
|
* within CTRL_REG1
|
||
|
*/
|
||
|
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, 0x00);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* Set max oversample ratio (OSR) and both devices active */
|
||
|
ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG1,
|
||
|
FXOS8700_HMS_MASK | FXOS8700_OS_MASK);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* Disable and rst min/max measurements & threshold */
|
||
|
ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG2,
|
||
|
FXOS8700_MAXMIN_RST | FXOS8700_MAXMIN_DIS_THS |
|
||
|
FXOS8700_MAXMIN_DIS);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/*
|
||
|
* Set max full-scale range (+/-8G) for ACCEL sensor in chip
|
||
|
* initialization then activate the device.
|
||
|
*/
|
||
|
ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* Max ODR (800Hz individual or 400Hz hybrid), active mode */
|
||
|
return regmap_update_bits(data->regmap, FXOS8700_CTRL_REG1,
|
||
|
FXOS8700_CTRL_ODR_MSK | FXOS8700_ACTIVE,
|
||
|
FIELD_PREP(FXOS8700_CTRL_ODR_MSK, FXOS8700_CTRL_ODR_MAX) |
|
||
|
FXOS8700_ACTIVE);
|
||
|
}
|
||
|
|
||
|
static void fxos8700_chip_uninit(void *data)
|
||
|
{
|
||
|
struct fxos8700_data *fxos8700_data = data;
|
||
|
|
||
|
fxos8700_set_active_mode(fxos8700_data, FXOS8700_ACCEL, false);
|
||
|
fxos8700_set_active_mode(fxos8700_data, FXOS8700_MAGN, false);
|
||
|
}
|
||
|
|
||
|
int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
|
||
|
const char *name, bool use_spi)
|
||
|
{
|
||
|
struct iio_dev *indio_dev;
|
||
|
struct fxos8700_data *data;
|
||
|
int ret;
|
||
|
|
||
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
||
|
if (!indio_dev)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
data = iio_priv(indio_dev);
|
||
|
dev_set_drvdata(dev, indio_dev);
|
||
|
data->regmap = regmap;
|
||
|
|
||
|
ret = fxos8700_chip_init(data, use_spi);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = devm_add_action_or_reset(dev, fxos8700_chip_uninit, data);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
indio_dev->channels = fxos8700_channels;
|
||
|
indio_dev->num_channels = ARRAY_SIZE(fxos8700_channels);
|
||
|
indio_dev->name = name ? name : "fxos8700";
|
||
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
||
|
indio_dev->info = &fxos8700_info;
|
||
|
|
||
|
return devm_iio_device_register(dev, indio_dev);
|
||
|
}
|
||
|
EXPORT_SYMBOL_GPL(fxos8700_core_probe);
|
||
|
|
||
|
MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
|
||
|
MODULE_DESCRIPTION("FXOS8700 6-Axis Acc and Mag Combo Sensor driver");
|
||
|
MODULE_LICENSE("GPL v2");
|