1196 lines
27 KiB
C
1196 lines
27 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
|
/*
|
||
|
* Afatech AF9033 demodulator driver
|
||
|
*
|
||
|
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
|
||
|
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
|
||
|
*/
|
||
|
|
||
|
#include "af9033_priv.h"
|
||
|
|
||
|
struct af9033_dev {
|
||
|
struct i2c_client *client;
|
||
|
struct regmap *regmap;
|
||
|
struct dvb_frontend fe;
|
||
|
struct af9033_config cfg;
|
||
|
bool is_af9035;
|
||
|
bool is_it9135;
|
||
|
|
||
|
u32 bandwidth_hz;
|
||
|
bool ts_mode_parallel;
|
||
|
bool ts_mode_serial;
|
||
|
|
||
|
enum fe_status fe_status;
|
||
|
u64 post_bit_error_prev; /* for old read_ber we return (curr - prev) */
|
||
|
u64 post_bit_error;
|
||
|
u64 post_bit_count;
|
||
|
u64 error_block_count;
|
||
|
u64 total_block_count;
|
||
|
};
|
||
|
|
||
|
/* Write reg val table using reg addr auto increment */
|
||
|
static int af9033_wr_reg_val_tab(struct af9033_dev *dev,
|
||
|
const struct reg_val *tab, int tab_len)
|
||
|
{
|
||
|
struct i2c_client *client = dev->client;
|
||
|
#define MAX_TAB_LEN 212
|
||
|
int ret, i, j;
|
||
|
u8 buf[1 + MAX_TAB_LEN];
|
||
|
|
||
|
dev_dbg(&client->dev, "tab_len=%d\n", tab_len);
|
||
|
|
||
|
if (tab_len > sizeof(buf)) {
|
||
|
dev_warn(&client->dev, "tab len %d is too big\n", tab_len);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
for (i = 0, j = 0; i < tab_len; i++) {
|
||
|
buf[j] = tab[i].val;
|
||
|
|
||
|
if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1) {
|
||
|
ret = regmap_bulk_write(dev->regmap, tab[i].reg - j,
|
||
|
buf, j + 1);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
j = 0;
|
||
|
} else {
|
||
|
j++;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_init(struct dvb_frontend *fe)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
||
|
int ret, i, len;
|
||
|
unsigned int utmp;
|
||
|
const struct reg_val *init;
|
||
|
u8 buf[4];
|
||
|
struct reg_val_mask tab[] = {
|
||
|
{ 0x80fb24, 0x00, 0x08 },
|
||
|
{ 0x80004c, 0x00, 0xff },
|
||
|
{ 0x00f641, dev->cfg.tuner, 0xff },
|
||
|
{ 0x80f5ca, 0x01, 0x01 },
|
||
|
{ 0x80f715, 0x01, 0x01 },
|
||
|
{ 0x00f41f, 0x04, 0x04 },
|
||
|
{ 0x00f41a, 0x01, 0x01 },
|
||
|
{ 0x80f731, 0x00, 0x01 },
|
||
|
{ 0x00d91e, 0x00, 0x01 },
|
||
|
{ 0x00d919, 0x00, 0x01 },
|
||
|
{ 0x80f732, 0x00, 0x01 },
|
||
|
{ 0x00d91f, 0x00, 0x01 },
|
||
|
{ 0x00d91a, 0x00, 0x01 },
|
||
|
{ 0x80f730, 0x00, 0x01 },
|
||
|
{ 0x80f778, 0x00, 0xff },
|
||
|
{ 0x80f73c, 0x01, 0x01 },
|
||
|
{ 0x80f776, 0x00, 0x01 },
|
||
|
{ 0x00d8fd, 0x01, 0xff },
|
||
|
{ 0x00d830, 0x01, 0xff },
|
||
|
{ 0x00d831, 0x00, 0xff },
|
||
|
{ 0x00d832, 0x00, 0xff },
|
||
|
{ 0x80f985, dev->ts_mode_serial, 0x01 },
|
||
|
{ 0x80f986, dev->ts_mode_parallel, 0x01 },
|
||
|
{ 0x00d827, 0x00, 0xff },
|
||
|
{ 0x00d829, 0x00, 0xff },
|
||
|
{ 0x800045, dev->cfg.adc_multiplier, 0xff },
|
||
|
};
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
/* Main clk control */
|
||
|
utmp = div_u64((u64)dev->cfg.clock * 0x80000, 1000000);
|
||
|
buf[0] = (utmp >> 0) & 0xff;
|
||
|
buf[1] = (utmp >> 8) & 0xff;
|
||
|
buf[2] = (utmp >> 16) & 0xff;
|
||
|
buf[3] = (utmp >> 24) & 0xff;
|
||
|
ret = regmap_bulk_write(dev->regmap, 0x800025, buf, 4);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
dev_dbg(&client->dev, "clk=%u clk_cw=%08x\n", dev->cfg.clock, utmp);
|
||
|
|
||
|
/* ADC clk control */
|
||
|
for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
|
||
|
if (clock_adc_lut[i].clock == dev->cfg.clock)
|
||
|
break;
|
||
|
}
|
||
|
if (i == ARRAY_SIZE(clock_adc_lut)) {
|
||
|
dev_err(&client->dev, "Couldn't find ADC config for clock %d\n",
|
||
|
dev->cfg.clock);
|
||
|
ret = -ENODEV;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
utmp = div_u64((u64)clock_adc_lut[i].adc * 0x80000, 1000000);
|
||
|
buf[0] = (utmp >> 0) & 0xff;
|
||
|
buf[1] = (utmp >> 8) & 0xff;
|
||
|
buf[2] = (utmp >> 16) & 0xff;
|
||
|
ret = regmap_bulk_write(dev->regmap, 0x80f1cd, buf, 3);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
dev_dbg(&client->dev, "adc=%u adc_cw=%06x\n",
|
||
|
clock_adc_lut[i].adc, utmp);
|
||
|
|
||
|
/* Config register table */
|
||
|
for (i = 0; i < ARRAY_SIZE(tab); i++) {
|
||
|
ret = regmap_update_bits(dev->regmap, tab[i].reg, tab[i].mask,
|
||
|
tab[i].val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
/* Demod clk output */
|
||
|
if (dev->cfg.dyn0_clk) {
|
||
|
ret = regmap_write(dev->regmap, 0x80fba8, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
/* TS interface */
|
||
|
if (dev->cfg.ts_mode == AF9033_TS_MODE_USB) {
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80f9a5, 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80f9b5, 0x01, 0x01);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
} else {
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80f990, 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80f9b5, 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
/* Demod core settings */
|
||
|
dev_dbg(&client->dev, "load ofsm settings\n");
|
||
|
switch (dev->cfg.tuner) {
|
||
|
case AF9033_TUNER_IT9135_38:
|
||
|
case AF9033_TUNER_IT9135_51:
|
||
|
case AF9033_TUNER_IT9135_52:
|
||
|
len = ARRAY_SIZE(ofsm_init_it9135_v1);
|
||
|
init = ofsm_init_it9135_v1;
|
||
|
break;
|
||
|
case AF9033_TUNER_IT9135_60:
|
||
|
case AF9033_TUNER_IT9135_61:
|
||
|
case AF9033_TUNER_IT9135_62:
|
||
|
len = ARRAY_SIZE(ofsm_init_it9135_v2);
|
||
|
init = ofsm_init_it9135_v2;
|
||
|
break;
|
||
|
default:
|
||
|
len = ARRAY_SIZE(ofsm_init);
|
||
|
init = ofsm_init;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
ret = af9033_wr_reg_val_tab(dev, init, len);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
/* Demod tuner specific settings */
|
||
|
dev_dbg(&client->dev, "load tuner specific settings\n");
|
||
|
switch (dev->cfg.tuner) {
|
||
|
case AF9033_TUNER_TUA9001:
|
||
|
len = ARRAY_SIZE(tuner_init_tua9001);
|
||
|
init = tuner_init_tua9001;
|
||
|
break;
|
||
|
case AF9033_TUNER_FC0011:
|
||
|
len = ARRAY_SIZE(tuner_init_fc0011);
|
||
|
init = tuner_init_fc0011;
|
||
|
break;
|
||
|
case AF9033_TUNER_MXL5007T:
|
||
|
len = ARRAY_SIZE(tuner_init_mxl5007t);
|
||
|
init = tuner_init_mxl5007t;
|
||
|
break;
|
||
|
case AF9033_TUNER_TDA18218:
|
||
|
len = ARRAY_SIZE(tuner_init_tda18218);
|
||
|
init = tuner_init_tda18218;
|
||
|
break;
|
||
|
case AF9033_TUNER_FC2580:
|
||
|
len = ARRAY_SIZE(tuner_init_fc2580);
|
||
|
init = tuner_init_fc2580;
|
||
|
break;
|
||
|
case AF9033_TUNER_FC0012:
|
||
|
len = ARRAY_SIZE(tuner_init_fc0012);
|
||
|
init = tuner_init_fc0012;
|
||
|
break;
|
||
|
case AF9033_TUNER_IT9135_38:
|
||
|
len = ARRAY_SIZE(tuner_init_it9135_38);
|
||
|
init = tuner_init_it9135_38;
|
||
|
break;
|
||
|
case AF9033_TUNER_IT9135_51:
|
||
|
len = ARRAY_SIZE(tuner_init_it9135_51);
|
||
|
init = tuner_init_it9135_51;
|
||
|
break;
|
||
|
case AF9033_TUNER_IT9135_52:
|
||
|
len = ARRAY_SIZE(tuner_init_it9135_52);
|
||
|
init = tuner_init_it9135_52;
|
||
|
break;
|
||
|
case AF9033_TUNER_IT9135_60:
|
||
|
len = ARRAY_SIZE(tuner_init_it9135_60);
|
||
|
init = tuner_init_it9135_60;
|
||
|
break;
|
||
|
case AF9033_TUNER_IT9135_61:
|
||
|
len = ARRAY_SIZE(tuner_init_it9135_61);
|
||
|
init = tuner_init_it9135_61;
|
||
|
break;
|
||
|
case AF9033_TUNER_IT9135_62:
|
||
|
len = ARRAY_SIZE(tuner_init_it9135_62);
|
||
|
init = tuner_init_it9135_62;
|
||
|
break;
|
||
|
default:
|
||
|
dev_dbg(&client->dev, "unsupported tuner ID=%d\n",
|
||
|
dev->cfg.tuner);
|
||
|
ret = -ENODEV;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
ret = af9033_wr_reg_val_tab(dev, init, len);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
if (dev->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
|
||
|
ret = regmap_update_bits(dev->regmap, 0x00d91c, 0x01, 0x01);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_update_bits(dev->regmap, 0x00d917, 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_update_bits(dev->regmap, 0x00d916, 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
switch (dev->cfg.tuner) {
|
||
|
case AF9033_TUNER_IT9135_60:
|
||
|
case AF9033_TUNER_IT9135_61:
|
||
|
case AF9033_TUNER_IT9135_62:
|
||
|
ret = regmap_write(dev->regmap, 0x800000, 0x01);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
dev->bandwidth_hz = 0; /* Force to program all parameters */
|
||
|
/* Init stats here in order signal app which stats are supported */
|
||
|
c->strength.len = 1;
|
||
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
c->cnr.len = 1;
|
||
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
c->block_count.len = 1;
|
||
|
c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
c->block_error.len = 1;
|
||
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
c->post_bit_count.len = 1;
|
||
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
c->post_bit_error.len = 1;
|
||
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_sleep(struct dvb_frontend *fe)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
int ret;
|
||
|
unsigned int utmp;
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
ret = regmap_write(dev->regmap, 0x80004c, 0x01);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap, 0x800000, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_read_poll_timeout(dev->regmap, 0x80004c, utmp, utmp == 0,
|
||
|
5000, 1000000);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80fb24, 0x08, 0x08);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
/* Prevent current leak by setting TS interface to parallel mode */
|
||
|
if (dev->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
|
||
|
/* Enable parallel TS */
|
||
|
ret = regmap_update_bits(dev->regmap, 0x00d917, 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_update_bits(dev->regmap, 0x00d916, 0x01, 0x01);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_get_tune_settings(struct dvb_frontend *fe,
|
||
|
struct dvb_frontend_tune_settings *fesettings)
|
||
|
{
|
||
|
/* 800 => 2000 because IT9135 v2 is slow to gain lock */
|
||
|
fesettings->min_delay_ms = 2000;
|
||
|
fesettings->step_size = 0;
|
||
|
fesettings->max_drift = 0;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int af9033_set_frontend(struct dvb_frontend *fe)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
||
|
int ret, i;
|
||
|
unsigned int utmp, adc_freq;
|
||
|
u8 tmp, buf[3], bandwidth_reg_val;
|
||
|
u32 if_frequency;
|
||
|
|
||
|
dev_dbg(&client->dev, "frequency=%u bandwidth_hz=%u\n",
|
||
|
c->frequency, c->bandwidth_hz);
|
||
|
|
||
|
/* Check bandwidth */
|
||
|
switch (c->bandwidth_hz) {
|
||
|
case 6000000:
|
||
|
bandwidth_reg_val = 0x00;
|
||
|
break;
|
||
|
case 7000000:
|
||
|
bandwidth_reg_val = 0x01;
|
||
|
break;
|
||
|
case 8000000:
|
||
|
bandwidth_reg_val = 0x02;
|
||
|
break;
|
||
|
default:
|
||
|
dev_dbg(&client->dev, "invalid bandwidth_hz\n");
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
/* Program tuner */
|
||
|
if (fe->ops.tuner_ops.set_params)
|
||
|
fe->ops.tuner_ops.set_params(fe);
|
||
|
|
||
|
/* Coefficients */
|
||
|
if (c->bandwidth_hz != dev->bandwidth_hz) {
|
||
|
for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
|
||
|
if (coeff_lut[i].clock == dev->cfg.clock &&
|
||
|
coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
if (i == ARRAY_SIZE(coeff_lut)) {
|
||
|
dev_err(&client->dev,
|
||
|
"Couldn't find config for clock %u\n",
|
||
|
dev->cfg.clock);
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
ret = regmap_bulk_write(dev->regmap, 0x800001, coeff_lut[i].val,
|
||
|
sizeof(coeff_lut[i].val));
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
/* IF frequency control */
|
||
|
if (c->bandwidth_hz != dev->bandwidth_hz) {
|
||
|
for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
|
||
|
if (clock_adc_lut[i].clock == dev->cfg.clock)
|
||
|
break;
|
||
|
}
|
||
|
if (i == ARRAY_SIZE(clock_adc_lut)) {
|
||
|
dev_err(&client->dev,
|
||
|
"Couldn't find ADC clock for clock %u\n",
|
||
|
dev->cfg.clock);
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
adc_freq = clock_adc_lut[i].adc;
|
||
|
|
||
|
if (dev->cfg.adc_multiplier == AF9033_ADC_MULTIPLIER_2X)
|
||
|
adc_freq = 2 * adc_freq;
|
||
|
|
||
|
/* Get used IF frequency */
|
||
|
if (fe->ops.tuner_ops.get_if_frequency)
|
||
|
fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
|
||
|
else
|
||
|
if_frequency = 0;
|
||
|
|
||
|
utmp = DIV_ROUND_CLOSEST_ULL((u64)if_frequency * 0x800000,
|
||
|
adc_freq);
|
||
|
|
||
|
if (!dev->cfg.spec_inv && if_frequency)
|
||
|
utmp = 0x800000 - utmp;
|
||
|
|
||
|
buf[0] = (utmp >> 0) & 0xff;
|
||
|
buf[1] = (utmp >> 8) & 0xff;
|
||
|
buf[2] = (utmp >> 16) & 0xff;
|
||
|
ret = regmap_bulk_write(dev->regmap, 0x800029, buf, 3);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
dev_dbg(&client->dev, "if_frequency_cw=%06x\n", utmp);
|
||
|
|
||
|
dev->bandwidth_hz = c->bandwidth_hz;
|
||
|
}
|
||
|
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80f904, 0x03,
|
||
|
bandwidth_reg_val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap, 0x800040, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap, 0x800047, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80f999, 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
if (c->frequency <= 230000000)
|
||
|
tmp = 0x00; /* VHF */
|
||
|
else
|
||
|
tmp = 0x01; /* UHF */
|
||
|
|
||
|
ret = regmap_write(dev->regmap, 0x80004b, tmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
/* Reset FSM */
|
||
|
ret = regmap_write(dev->regmap, 0x800000, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_get_frontend(struct dvb_frontend *fe,
|
||
|
struct dtv_frontend_properties *c)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
int ret;
|
||
|
u8 buf[8];
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
/* Read all needed TPS registers */
|
||
|
ret = regmap_bulk_read(dev->regmap, 0x80f900, buf, 8);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
switch ((buf[0] >> 0) & 3) {
|
||
|
case 0:
|
||
|
c->transmission_mode = TRANSMISSION_MODE_2K;
|
||
|
break;
|
||
|
case 1:
|
||
|
c->transmission_mode = TRANSMISSION_MODE_8K;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
switch ((buf[1] >> 0) & 3) {
|
||
|
case 0:
|
||
|
c->guard_interval = GUARD_INTERVAL_1_32;
|
||
|
break;
|
||
|
case 1:
|
||
|
c->guard_interval = GUARD_INTERVAL_1_16;
|
||
|
break;
|
||
|
case 2:
|
||
|
c->guard_interval = GUARD_INTERVAL_1_8;
|
||
|
break;
|
||
|
case 3:
|
||
|
c->guard_interval = GUARD_INTERVAL_1_4;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
switch ((buf[2] >> 0) & 7) {
|
||
|
case 0:
|
||
|
c->hierarchy = HIERARCHY_NONE;
|
||
|
break;
|
||
|
case 1:
|
||
|
c->hierarchy = HIERARCHY_1;
|
||
|
break;
|
||
|
case 2:
|
||
|
c->hierarchy = HIERARCHY_2;
|
||
|
break;
|
||
|
case 3:
|
||
|
c->hierarchy = HIERARCHY_4;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
switch ((buf[3] >> 0) & 3) {
|
||
|
case 0:
|
||
|
c->modulation = QPSK;
|
||
|
break;
|
||
|
case 1:
|
||
|
c->modulation = QAM_16;
|
||
|
break;
|
||
|
case 2:
|
||
|
c->modulation = QAM_64;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
switch ((buf[4] >> 0) & 3) {
|
||
|
case 0:
|
||
|
c->bandwidth_hz = 6000000;
|
||
|
break;
|
||
|
case 1:
|
||
|
c->bandwidth_hz = 7000000;
|
||
|
break;
|
||
|
case 2:
|
||
|
c->bandwidth_hz = 8000000;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
switch ((buf[6] >> 0) & 7) {
|
||
|
case 0:
|
||
|
c->code_rate_HP = FEC_1_2;
|
||
|
break;
|
||
|
case 1:
|
||
|
c->code_rate_HP = FEC_2_3;
|
||
|
break;
|
||
|
case 2:
|
||
|
c->code_rate_HP = FEC_3_4;
|
||
|
break;
|
||
|
case 3:
|
||
|
c->code_rate_HP = FEC_5_6;
|
||
|
break;
|
||
|
case 4:
|
||
|
c->code_rate_HP = FEC_7_8;
|
||
|
break;
|
||
|
case 5:
|
||
|
c->code_rate_HP = FEC_NONE;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
switch ((buf[7] >> 0) & 7) {
|
||
|
case 0:
|
||
|
c->code_rate_LP = FEC_1_2;
|
||
|
break;
|
||
|
case 1:
|
||
|
c->code_rate_LP = FEC_2_3;
|
||
|
break;
|
||
|
case 2:
|
||
|
c->code_rate_LP = FEC_3_4;
|
||
|
break;
|
||
|
case 3:
|
||
|
c->code_rate_LP = FEC_5_6;
|
||
|
break;
|
||
|
case 4:
|
||
|
c->code_rate_LP = FEC_7_8;
|
||
|
break;
|
||
|
case 5:
|
||
|
c->code_rate_LP = FEC_NONE;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
||
|
int ret, tmp = 0;
|
||
|
u8 buf[7];
|
||
|
unsigned int utmp, utmp1;
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
*status = 0;
|
||
|
|
||
|
/* Radio channel status: 0=no result, 1=has signal, 2=no signal */
|
||
|
ret = regmap_read(dev->regmap, 0x800047, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
/* Has signal */
|
||
|
if (utmp == 0x01)
|
||
|
*status |= FE_HAS_SIGNAL;
|
||
|
|
||
|
if (utmp != 0x02) {
|
||
|
/* TPS lock */
|
||
|
ret = regmap_read(dev->regmap, 0x80f5a9, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
if ((utmp >> 0) & 0x01)
|
||
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
||
|
FE_HAS_VITERBI;
|
||
|
|
||
|
/* Full lock */
|
||
|
ret = regmap_read(dev->regmap, 0x80f999, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
if ((utmp >> 0) & 0x01)
|
||
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
||
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
||
|
FE_HAS_LOCK;
|
||
|
}
|
||
|
|
||
|
dev->fe_status = *status;
|
||
|
|
||
|
/* Signal strength */
|
||
|
if (dev->fe_status & FE_HAS_SIGNAL) {
|
||
|
if (dev->is_af9035) {
|
||
|
ret = regmap_read(dev->regmap, 0x80004a, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
tmp = -utmp * 1000;
|
||
|
} else {
|
||
|
ret = regmap_read(dev->regmap, 0x8000f7, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
tmp = (utmp - 100) * 1000;
|
||
|
}
|
||
|
|
||
|
c->strength.len = 1;
|
||
|
c->strength.stat[0].scale = FE_SCALE_DECIBEL;
|
||
|
c->strength.stat[0].svalue = tmp;
|
||
|
} else {
|
||
|
c->strength.len = 1;
|
||
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
}
|
||
|
|
||
|
/* CNR */
|
||
|
if (dev->fe_status & FE_HAS_VITERBI) {
|
||
|
/* Read raw SNR value */
|
||
|
ret = regmap_bulk_read(dev->regmap, 0x80002c, buf, 3);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
utmp1 = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
|
||
|
|
||
|
/* Read superframe number */
|
||
|
ret = regmap_read(dev->regmap, 0x80f78b, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
if (utmp)
|
||
|
utmp1 /= utmp;
|
||
|
|
||
|
/* Read current transmission mode */
|
||
|
ret = regmap_read(dev->regmap, 0x80f900, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
switch ((utmp >> 0) & 3) {
|
||
|
case 0:
|
||
|
/* 2k */
|
||
|
utmp1 *= 4;
|
||
|
break;
|
||
|
case 1:
|
||
|
/* 8k */
|
||
|
utmp1 *= 1;
|
||
|
break;
|
||
|
case 2:
|
||
|
/* 4k */
|
||
|
utmp1 *= 2;
|
||
|
break;
|
||
|
default:
|
||
|
utmp1 *= 0;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Read current modulation */
|
||
|
ret = regmap_read(dev->regmap, 0x80f903, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
switch ((utmp >> 0) & 3) {
|
||
|
case 0:
|
||
|
/*
|
||
|
* QPSK
|
||
|
* CNR[dB] 13 * -log10((1690000 - value) / value) + 2.6
|
||
|
* value [653799, 1689999], 2.6 / 13 = 3355443
|
||
|
*/
|
||
|
utmp1 = clamp(utmp1, 653799U, 1689999U);
|
||
|
utmp1 = ((u64)(intlog10(utmp1)
|
||
|
- intlog10(1690000 - utmp1)
|
||
|
+ 3355443) * 13 * 1000) >> 24;
|
||
|
break;
|
||
|
case 1:
|
||
|
/*
|
||
|
* QAM-16
|
||
|
* CNR[dB] 6 * log10((value - 370000) / (828000 - value)) + 15.7
|
||
|
* value [371105, 827999], 15.7 / 6 = 43900382
|
||
|
*/
|
||
|
utmp1 = clamp(utmp1, 371105U, 827999U);
|
||
|
utmp1 = ((u64)(intlog10(utmp1 - 370000)
|
||
|
- intlog10(828000 - utmp1)
|
||
|
+ 43900382) * 6 * 1000) >> 24;
|
||
|
break;
|
||
|
case 2:
|
||
|
/*
|
||
|
* QAM-64
|
||
|
* CNR[dB] 8 * log10((value - 193000) / (425000 - value)) + 23.8
|
||
|
* value [193246, 424999], 23.8 / 8 = 49912218
|
||
|
*/
|
||
|
utmp1 = clamp(utmp1, 193246U, 424999U);
|
||
|
utmp1 = ((u64)(intlog10(utmp1 - 193000)
|
||
|
- intlog10(425000 - utmp1)
|
||
|
+ 49912218) * 8 * 1000) >> 24;
|
||
|
break;
|
||
|
default:
|
||
|
utmp1 = 0;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
dev_dbg(&client->dev, "cnr=%u\n", utmp1);
|
||
|
|
||
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
||
|
c->cnr.stat[0].svalue = utmp1;
|
||
|
} else {
|
||
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
||
|
}
|
||
|
|
||
|
/* UCB/PER/BER */
|
||
|
if (dev->fe_status & FE_HAS_LOCK) {
|
||
|
/* Outer FEC, 204 byte packets */
|
||
|
u16 abort_packet_count, rsd_packet_count;
|
||
|
/* Inner FEC, bits */
|
||
|
u32 rsd_bit_err_count;
|
||
|
|
||
|
/*
|
||
|
* Packet count used for measurement is 10000
|
||
|
* (rsd_packet_count). Maybe it should be increased?
|
||
|
*/
|
||
|
|
||
|
ret = regmap_bulk_read(dev->regmap, 0x800032, buf, 7);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
abort_packet_count = (buf[1] << 8) | (buf[0] << 0);
|
||
|
rsd_bit_err_count = (buf[4] << 16) | (buf[3] << 8) | buf[2];
|
||
|
rsd_packet_count = (buf[6] << 8) | (buf[5] << 0);
|
||
|
|
||
|
dev->error_block_count += abort_packet_count;
|
||
|
dev->total_block_count += rsd_packet_count;
|
||
|
dev->post_bit_error += rsd_bit_err_count;
|
||
|
dev->post_bit_count += rsd_packet_count * 204 * 8;
|
||
|
|
||
|
c->block_count.len = 1;
|
||
|
c->block_count.stat[0].scale = FE_SCALE_COUNTER;
|
||
|
c->block_count.stat[0].uvalue = dev->total_block_count;
|
||
|
|
||
|
c->block_error.len = 1;
|
||
|
c->block_error.stat[0].scale = FE_SCALE_COUNTER;
|
||
|
c->block_error.stat[0].uvalue = dev->error_block_count;
|
||
|
|
||
|
c->post_bit_count.len = 1;
|
||
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
||
|
c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
|
||
|
|
||
|
c->post_bit_error.len = 1;
|
||
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
||
|
c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
|
||
|
int ret;
|
||
|
unsigned int utmp;
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
/* Use DVBv5 CNR */
|
||
|
if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL) {
|
||
|
/* Return 0.1 dB for AF9030 and 0-0xffff for IT9130. */
|
||
|
if (dev->is_af9035) {
|
||
|
/* 1000x => 10x (0.1 dB) */
|
||
|
*snr = div_s64(c->cnr.stat[0].svalue, 100);
|
||
|
} else {
|
||
|
/* 1000x => 1x (1 dB) */
|
||
|
*snr = div_s64(c->cnr.stat[0].svalue, 1000);
|
||
|
|
||
|
/* Read current modulation */
|
||
|
ret = regmap_read(dev->regmap, 0x80f903, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
/* scale value to 0x0000-0xffff */
|
||
|
switch ((utmp >> 0) & 3) {
|
||
|
case 0:
|
||
|
*snr = *snr * 0xffff / 23;
|
||
|
break;
|
||
|
case 1:
|
||
|
*snr = *snr * 0xffff / 26;
|
||
|
break;
|
||
|
case 2:
|
||
|
*snr = *snr * 0xffff / 32;
|
||
|
break;
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
}
|
||
|
} else {
|
||
|
*snr = 0;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
|
||
|
int ret, tmp, power_real;
|
||
|
unsigned int utmp;
|
||
|
u8 gain_offset, buf[7];
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
if (dev->is_af9035) {
|
||
|
/* Read signal strength of 0-100 scale */
|
||
|
ret = regmap_read(dev->regmap, 0x800048, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
/* Scale value to 0x0000-0xffff */
|
||
|
*strength = utmp * 0xffff / 100;
|
||
|
} else {
|
||
|
ret = regmap_read(dev->regmap, 0x8000f7, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
ret = regmap_bulk_read(dev->regmap, 0x80f900, buf, 7);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
if (c->frequency <= 300000000)
|
||
|
gain_offset = 7; /* VHF */
|
||
|
else
|
||
|
gain_offset = 4; /* UHF */
|
||
|
|
||
|
power_real = (utmp - 100 - gain_offset) -
|
||
|
power_reference[((buf[3] >> 0) & 3)][((buf[6] >> 0) & 7)];
|
||
|
|
||
|
if (power_real < -15)
|
||
|
tmp = 0;
|
||
|
else if ((power_real >= -15) && (power_real < 0))
|
||
|
tmp = (2 * (power_real + 15)) / 3;
|
||
|
else if ((power_real >= 0) && (power_real < 20))
|
||
|
tmp = 4 * power_real + 10;
|
||
|
else if ((power_real >= 20) && (power_real < 35))
|
||
|
tmp = (2 * (power_real - 20)) / 3 + 90;
|
||
|
else
|
||
|
tmp = 100;
|
||
|
|
||
|
/* Scale value to 0x0000-0xffff */
|
||
|
*strength = tmp * 0xffff / 100;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_read_ber(struct dvb_frontend *fe, u32 *ber)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
|
||
|
*ber = (dev->post_bit_error - dev->post_bit_error_prev);
|
||
|
dev->post_bit_error_prev = dev->post_bit_error;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int af9033_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
|
||
|
*ucblocks = dev->error_block_count;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
int ret;
|
||
|
|
||
|
dev_dbg(&client->dev, "enable=%d\n", enable);
|
||
|
|
||
|
ret = regmap_update_bits(dev->regmap, 0x00fa04, 0x01, enable);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
int ret;
|
||
|
|
||
|
dev_dbg(&client->dev, "onoff=%d\n", onoff);
|
||
|
|
||
|
ret = regmap_update_bits(dev->regmap, 0x80f993, 0x01, onoff);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int af9033_pid_filter(struct dvb_frontend *fe, int index, u16 pid,
|
||
|
int onoff)
|
||
|
{
|
||
|
struct af9033_dev *dev = fe->demodulator_priv;
|
||
|
struct i2c_client *client = dev->client;
|
||
|
int ret;
|
||
|
u8 wbuf[2] = {(pid >> 0) & 0xff, (pid >> 8) & 0xff};
|
||
|
|
||
|
dev_dbg(&client->dev, "index=%d pid=%04x onoff=%d\n",
|
||
|
index, pid, onoff);
|
||
|
|
||
|
if (pid > 0x1fff)
|
||
|
return 0;
|
||
|
|
||
|
ret = regmap_bulk_write(dev->regmap, 0x80f996, wbuf, 2);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap, 0x80f994, onoff);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap, 0x80f995, index);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static const struct dvb_frontend_ops af9033_ops = {
|
||
|
.delsys = {SYS_DVBT},
|
||
|
.info = {
|
||
|
.name = "Afatech AF9033 (DVB-T)",
|
||
|
.frequency_min_hz = 174 * MHz,
|
||
|
.frequency_max_hz = 862 * MHz,
|
||
|
.frequency_stepsize_hz = 250 * kHz,
|
||
|
.caps = FE_CAN_FEC_1_2 |
|
||
|
FE_CAN_FEC_2_3 |
|
||
|
FE_CAN_FEC_3_4 |
|
||
|
FE_CAN_FEC_5_6 |
|
||
|
FE_CAN_FEC_7_8 |
|
||
|
FE_CAN_FEC_AUTO |
|
||
|
FE_CAN_QPSK |
|
||
|
FE_CAN_QAM_16 |
|
||
|
FE_CAN_QAM_64 |
|
||
|
FE_CAN_QAM_AUTO |
|
||
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
||
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
||
|
FE_CAN_HIERARCHY_AUTO |
|
||
|
FE_CAN_RECOVER |
|
||
|
FE_CAN_MUTE_TS
|
||
|
},
|
||
|
|
||
|
.init = af9033_init,
|
||
|
.sleep = af9033_sleep,
|
||
|
|
||
|
.get_tune_settings = af9033_get_tune_settings,
|
||
|
.set_frontend = af9033_set_frontend,
|
||
|
.get_frontend = af9033_get_frontend,
|
||
|
|
||
|
.read_status = af9033_read_status,
|
||
|
.read_snr = af9033_read_snr,
|
||
|
.read_signal_strength = af9033_read_signal_strength,
|
||
|
.read_ber = af9033_read_ber,
|
||
|
.read_ucblocks = af9033_read_ucblocks,
|
||
|
|
||
|
.i2c_gate_ctrl = af9033_i2c_gate_ctrl,
|
||
|
};
|
||
|
|
||
|
static int af9033_probe(struct i2c_client *client)
|
||
|
{
|
||
|
struct af9033_config *cfg = client->dev.platform_data;
|
||
|
struct af9033_dev *dev;
|
||
|
int ret;
|
||
|
u8 buf[8];
|
||
|
u32 reg;
|
||
|
static const struct regmap_config regmap_config = {
|
||
|
.reg_bits = 24,
|
||
|
.val_bits = 8,
|
||
|
};
|
||
|
|
||
|
/* Allocate memory for the internal state */
|
||
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
||
|
if (!dev) {
|
||
|
ret = -ENOMEM;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
/* Setup the state */
|
||
|
dev->client = client;
|
||
|
memcpy(&dev->cfg, cfg, sizeof(dev->cfg));
|
||
|
switch (dev->cfg.ts_mode) {
|
||
|
case AF9033_TS_MODE_PARALLEL:
|
||
|
dev->ts_mode_parallel = true;
|
||
|
break;
|
||
|
case AF9033_TS_MODE_SERIAL:
|
||
|
dev->ts_mode_serial = true;
|
||
|
break;
|
||
|
case AF9033_TS_MODE_USB:
|
||
|
/* USB mode for AF9035 */
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (dev->cfg.clock != 12000000) {
|
||
|
ret = -ENODEV;
|
||
|
dev_err(&client->dev,
|
||
|
"Unsupported clock %u Hz. Only 12000000 Hz is supported currently\n",
|
||
|
dev->cfg.clock);
|
||
|
goto err_kfree;
|
||
|
}
|
||
|
|
||
|
/* Create regmap */
|
||
|
dev->regmap = regmap_init_i2c(client, ®map_config);
|
||
|
if (IS_ERR(dev->regmap)) {
|
||
|
ret = PTR_ERR(dev->regmap);
|
||
|
goto err_kfree;
|
||
|
}
|
||
|
|
||
|
/* Firmware version */
|
||
|
switch (dev->cfg.tuner) {
|
||
|
case AF9033_TUNER_IT9135_38:
|
||
|
case AF9033_TUNER_IT9135_51:
|
||
|
case AF9033_TUNER_IT9135_52:
|
||
|
case AF9033_TUNER_IT9135_60:
|
||
|
case AF9033_TUNER_IT9135_61:
|
||
|
case AF9033_TUNER_IT9135_62:
|
||
|
dev->is_it9135 = true;
|
||
|
reg = 0x004bfc;
|
||
|
break;
|
||
|
default:
|
||
|
dev->is_af9035 = true;
|
||
|
reg = 0x0083e9;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
ret = regmap_bulk_read(dev->regmap, reg, &buf[0], 4);
|
||
|
if (ret)
|
||
|
goto err_regmap_exit;
|
||
|
ret = regmap_bulk_read(dev->regmap, 0x804191, &buf[4], 4);
|
||
|
if (ret)
|
||
|
goto err_regmap_exit;
|
||
|
|
||
|
dev_info(&client->dev,
|
||
|
"firmware version: LINK %d.%d.%d.%d - OFDM %d.%d.%d.%d\n",
|
||
|
buf[0], buf[1], buf[2], buf[3],
|
||
|
buf[4], buf[5], buf[6], buf[7]);
|
||
|
|
||
|
/* Sleep as chip seems to be partly active by default */
|
||
|
/* IT9135 did not like to sleep at that early */
|
||
|
if (dev->is_af9035) {
|
||
|
ret = regmap_write(dev->regmap, 0x80004c, 0x01);
|
||
|
if (ret)
|
||
|
goto err_regmap_exit;
|
||
|
ret = regmap_write(dev->regmap, 0x800000, 0x00);
|
||
|
if (ret)
|
||
|
goto err_regmap_exit;
|
||
|
}
|
||
|
|
||
|
/* Create dvb frontend */
|
||
|
memcpy(&dev->fe.ops, &af9033_ops, sizeof(dev->fe.ops));
|
||
|
dev->fe.demodulator_priv = dev;
|
||
|
*cfg->fe = &dev->fe;
|
||
|
if (cfg->ops) {
|
||
|
cfg->ops->pid_filter = af9033_pid_filter;
|
||
|
cfg->ops->pid_filter_ctrl = af9033_pid_filter_ctrl;
|
||
|
}
|
||
|
cfg->regmap = dev->regmap;
|
||
|
i2c_set_clientdata(client, dev);
|
||
|
|
||
|
dev_info(&client->dev, "Afatech AF9033 successfully attached\n");
|
||
|
|
||
|
return 0;
|
||
|
err_regmap_exit:
|
||
|
regmap_exit(dev->regmap);
|
||
|
err_kfree:
|
||
|
kfree(dev);
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void af9033_remove(struct i2c_client *client)
|
||
|
{
|
||
|
struct af9033_dev *dev = i2c_get_clientdata(client);
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
regmap_exit(dev->regmap);
|
||
|
kfree(dev);
|
||
|
}
|
||
|
|
||
|
static const struct i2c_device_id af9033_id_table[] = {
|
||
|
{"af9033", 0},
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(i2c, af9033_id_table);
|
||
|
|
||
|
static struct i2c_driver af9033_driver = {
|
||
|
.driver = {
|
||
|
.name = "af9033",
|
||
|
.suppress_bind_attrs = true,
|
||
|
},
|
||
|
.probe_new = af9033_probe,
|
||
|
.remove = af9033_remove,
|
||
|
.id_table = af9033_id_table,
|
||
|
};
|
||
|
|
||
|
module_i2c_driver(af9033_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
||
|
MODULE_DESCRIPTION("Afatech AF9033 DVB-T demodulator driver");
|
||
|
MODULE_LICENSE("GPL");
|