379 lines
9.6 KiB
C
379 lines
9.6 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
|
|
/*
|
||
|
|
* IDT RXS Gen.3 Serial RapidIO switch family support
|
||
|
|
*
|
||
|
|
* Copyright 2016 Integrated Device Technology, Inc.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/stat.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/rio.h>
|
||
|
|
#include <linux/rio_drv.h>
|
||
|
|
#include <linux/rio_ids.h>
|
||
|
|
#include <linux/delay.h>
|
||
|
|
|
||
|
|
#include <asm/page.h>
|
||
|
|
#include "../rio.h"
|
||
|
|
|
||
|
|
#define RIO_EM_PW_STAT 0x40020
|
||
|
|
#define RIO_PW_CTL 0x40204
|
||
|
|
#define RIO_PW_CTL_PW_TMR 0xffffff00
|
||
|
|
#define RIO_PW_ROUTE 0x40208
|
||
|
|
|
||
|
|
#define RIO_EM_DEV_INT_EN 0x40030
|
||
|
|
|
||
|
|
#define RIO_PLM_SPx_IMP_SPEC_CTL(x) (0x10100 + (x)*0x100)
|
||
|
|
#define RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST 0x02000000
|
||
|
|
|
||
|
|
#define RIO_PLM_SPx_PW_EN(x) (0x10118 + (x)*0x100)
|
||
|
|
#define RIO_PLM_SPx_PW_EN_OK2U 0x40000000
|
||
|
|
#define RIO_PLM_SPx_PW_EN_LINIT 0x10000000
|
||
|
|
|
||
|
|
#define RIO_BC_L2_Gn_ENTRYx_CSR(n, x) (0x31000 + (n)*0x400 + (x)*0x4)
|
||
|
|
#define RIO_SPx_L2_Gn_ENTRYy_CSR(x, n, y) \
|
||
|
|
(0x51000 + (x)*0x2000 + (n)*0x400 + (y)*0x4)
|
||
|
|
|
||
|
|
static int
|
||
|
|
idtg3_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
|
||
|
|
u16 table, u16 route_destid, u8 route_port)
|
||
|
|
{
|
||
|
|
u32 rval;
|
||
|
|
u32 entry = route_port;
|
||
|
|
int err = 0;
|
||
|
|
|
||
|
|
pr_debug("RIO: %s t=0x%x did_%x to p_%x\n",
|
||
|
|
__func__, table, route_destid, entry);
|
||
|
|
|
||
|
|
if (route_destid > 0xFF)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
if (route_port == RIO_INVALID_ROUTE)
|
||
|
|
entry = RIO_RT_ENTRY_DROP_PKT;
|
||
|
|
|
||
|
|
if (table == RIO_GLOBAL_TABLE) {
|
||
|
|
/* Use broadcast register to update all per-port tables */
|
||
|
|
err = rio_mport_write_config_32(mport, destid, hopcount,
|
||
|
|
RIO_BC_L2_Gn_ENTRYx_CSR(0, route_destid),
|
||
|
|
entry);
|
||
|
|
return err;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Verify that specified port/table number is valid
|
||
|
|
*/
|
||
|
|
err = rio_mport_read_config_32(mport, destid, hopcount,
|
||
|
|
RIO_SWP_INFO_CAR, &rval);
|
||
|
|
if (err)
|
||
|
|
return err;
|
||
|
|
|
||
|
|
if (table >= RIO_GET_TOTAL_PORTS(rval))
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
err = rio_mport_write_config_32(mport, destid, hopcount,
|
||
|
|
RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
|
||
|
|
entry);
|
||
|
|
return err;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int
|
||
|
|
idtg3_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
|
||
|
|
u16 table, u16 route_destid, u8 *route_port)
|
||
|
|
{
|
||
|
|
u32 rval;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
if (route_destid > 0xFF)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
err = rio_mport_read_config_32(mport, destid, hopcount,
|
||
|
|
RIO_SWP_INFO_CAR, &rval);
|
||
|
|
if (err)
|
||
|
|
return err;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* This switch device does not have the dedicated global routing table.
|
||
|
|
* It is substituted by reading routing table of the ingress port of
|
||
|
|
* maintenance read requests.
|
||
|
|
*/
|
||
|
|
if (table == RIO_GLOBAL_TABLE)
|
||
|
|
table = RIO_GET_PORT_NUM(rval);
|
||
|
|
else if (table >= RIO_GET_TOTAL_PORTS(rval))
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
err = rio_mport_read_config_32(mport, destid, hopcount,
|
||
|
|
RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
|
||
|
|
&rval);
|
||
|
|
if (err)
|
||
|
|
return err;
|
||
|
|
|
||
|
|
if (rval == RIO_RT_ENTRY_DROP_PKT)
|
||
|
|
*route_port = RIO_INVALID_ROUTE;
|
||
|
|
else
|
||
|
|
*route_port = (u8)rval;
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int
|
||
|
|
idtg3_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
|
||
|
|
u16 table)
|
||
|
|
{
|
||
|
|
u32 i;
|
||
|
|
u32 rval;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
if (table == RIO_GLOBAL_TABLE) {
|
||
|
|
for (i = 0; i <= 0xff; i++) {
|
||
|
|
err = rio_mport_write_config_32(mport, destid, hopcount,
|
||
|
|
RIO_BC_L2_Gn_ENTRYx_CSR(0, i),
|
||
|
|
RIO_RT_ENTRY_DROP_PKT);
|
||
|
|
if (err)
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
return err;
|
||
|
|
}
|
||
|
|
|
||
|
|
err = rio_mport_read_config_32(mport, destid, hopcount,
|
||
|
|
RIO_SWP_INFO_CAR, &rval);
|
||
|
|
if (err)
|
||
|
|
return err;
|
||
|
|
|
||
|
|
if (table >= RIO_GET_TOTAL_PORTS(rval))
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
for (i = 0; i <= 0xff; i++) {
|
||
|
|
err = rio_mport_write_config_32(mport, destid, hopcount,
|
||
|
|
RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, i),
|
||
|
|
RIO_RT_ENTRY_DROP_PKT);
|
||
|
|
if (err)
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
return err;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* This routine performs device-specific initialization only.
|
||
|
|
* All standard EM configuration should be performed at upper level.
|
||
|
|
*/
|
||
|
|
static int
|
||
|
|
idtg3_em_init(struct rio_dev *rdev)
|
||
|
|
{
|
||
|
|
int i, tmp;
|
||
|
|
u32 rval;
|
||
|
|
|
||
|
|
pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
|
||
|
|
|
||
|
|
/* Disable assertion of interrupt signal */
|
||
|
|
rio_write_config_32(rdev, RIO_EM_DEV_INT_EN, 0);
|
||
|
|
|
||
|
|
/* Disable port-write event notifications during initialization */
|
||
|
|
rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL,
|
||
|
|
RIO_EM_PW_TX_CTRL_PW_DIS);
|
||
|
|
|
||
|
|
/* Configure Port-Write notifications for hot-swap events */
|
||
|
|
tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
|
||
|
|
for (i = 0; i < tmp; i++) {
|
||
|
|
|
||
|
|
rio_read_config_32(rdev,
|
||
|
|
RIO_DEV_PORT_N_ERR_STS_CSR(rdev, i),
|
||
|
|
&rval);
|
||
|
|
if (rval & RIO_PORT_N_ERR_STS_PORT_UA)
|
||
|
|
continue;
|
||
|
|
|
||
|
|
/* Clear events signaled before enabling notification */
|
||
|
|
rio_write_config_32(rdev,
|
||
|
|
rdev->em_efptr + RIO_EM_PN_ERR_DETECT(i), 0);
|
||
|
|
|
||
|
|
/* Enable event notifications */
|
||
|
|
rio_write_config_32(rdev,
|
||
|
|
rdev->em_efptr + RIO_EM_PN_ERRRATE_EN(i),
|
||
|
|
RIO_EM_PN_ERRRATE_EN_OK2U | RIO_EM_PN_ERRRATE_EN_U2OK);
|
||
|
|
/* Enable port-write generation on events */
|
||
|
|
rio_write_config_32(rdev, RIO_PLM_SPx_PW_EN(i),
|
||
|
|
RIO_PLM_SPx_PW_EN_OK2U | RIO_PLM_SPx_PW_EN_LINIT);
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Set Port-Write destination port */
|
||
|
|
tmp = RIO_GET_PORT_NUM(rdev->swpinfo);
|
||
|
|
rio_write_config_32(rdev, RIO_PW_ROUTE, 1 << tmp);
|
||
|
|
|
||
|
|
|
||
|
|
/* Enable sending port-write event notifications */
|
||
|
|
rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
|
||
|
|
|
||
|
|
/* set TVAL = ~50us */
|
||
|
|
rio_write_config_32(rdev,
|
||
|
|
rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* idtg3_em_handler - device-specific error handler
|
||
|
|
*
|
||
|
|
* If the link is down (PORT_UNINIT) does nothing - this is considered
|
||
|
|
* as link partner removal from the port.
|
||
|
|
*
|
||
|
|
* If the link is up (PORT_OK) - situation is handled as *new* device insertion.
|
||
|
|
* In this case ERR_STOP bits are cleared by issuing soft reset command to the
|
||
|
|
* reporting port. Inbound and outbound ackIDs are cleared by the reset as well.
|
||
|
|
* This way the port is synchronized with freshly inserted device (assuming it
|
||
|
|
* was reset/powered-up on insertion).
|
||
|
|
*
|
||
|
|
* TODO: This is not sufficient in a situation when a link between two devices
|
||
|
|
* was down and up again (e.g. cable disconnect). For that situation full ackID
|
||
|
|
* realignment process has to be implemented.
|
||
|
|
*/
|
||
|
|
static int
|
||
|
|
idtg3_em_handler(struct rio_dev *rdev, u8 pnum)
|
||
|
|
{
|
||
|
|
u32 err_status;
|
||
|
|
u32 rval;
|
||
|
|
|
||
|
|
rio_read_config_32(rdev,
|
||
|
|
RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
|
||
|
|
&err_status);
|
||
|
|
|
||
|
|
/* Do nothing for device/link removal */
|
||
|
|
if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT)
|
||
|
|
return 0;
|
||
|
|
|
||
|
|
/* When link is OK we have a device insertion.
|
||
|
|
* Request port soft reset to clear errors if they present.
|
||
|
|
* Inbound and outbound ackIDs will be 0 after reset.
|
||
|
|
*/
|
||
|
|
if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
|
||
|
|
RIO_PORT_N_ERR_STS_INP_ES)) {
|
||
|
|
rio_read_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), &rval);
|
||
|
|
rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum),
|
||
|
|
rval | RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST);
|
||
|
|
udelay(10);
|
||
|
|
rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), rval);
|
||
|
|
msleep(500);
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static struct rio_switch_ops idtg3_switch_ops = {
|
||
|
|
.owner = THIS_MODULE,
|
||
|
|
.add_entry = idtg3_route_add_entry,
|
||
|
|
.get_entry = idtg3_route_get_entry,
|
||
|
|
.clr_table = idtg3_route_clr_table,
|
||
|
|
.em_init = idtg3_em_init,
|
||
|
|
.em_handle = idtg3_em_handler,
|
||
|
|
};
|
||
|
|
|
||
|
|
static int idtg3_probe(struct rio_dev *rdev, const struct rio_device_id *id)
|
||
|
|
{
|
||
|
|
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
|
||
|
|
|
||
|
|
spin_lock(&rdev->rswitch->lock);
|
||
|
|
|
||
|
|
if (rdev->rswitch->ops) {
|
||
|
|
spin_unlock(&rdev->rswitch->lock);
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
rdev->rswitch->ops = &idtg3_switch_ops;
|
||
|
|
|
||
|
|
if (rdev->do_enum) {
|
||
|
|
/* Disable hierarchical routing support: Existing fabric
|
||
|
|
* enumeration/discovery process (see rio-scan.c) uses 8-bit
|
||
|
|
* flat destination ID routing only.
|
||
|
|
*/
|
||
|
|
rio_write_config_32(rdev, 0x5000 + RIO_BC_RT_CTL_CSR, 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
spin_unlock(&rdev->rswitch->lock);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void idtg3_remove(struct rio_dev *rdev)
|
||
|
|
{
|
||
|
|
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
|
||
|
|
spin_lock(&rdev->rswitch->lock);
|
||
|
|
if (rdev->rswitch->ops == &idtg3_switch_ops)
|
||
|
|
rdev->rswitch->ops = NULL;
|
||
|
|
spin_unlock(&rdev->rswitch->lock);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Gen3 switches repeat sending PW messages until a corresponding event flag
|
||
|
|
* is cleared. Use shutdown notification to disable generation of port-write
|
||
|
|
* messages if their destination node is shut down.
|
||
|
|
*/
|
||
|
|
static void idtg3_shutdown(struct rio_dev *rdev)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
u32 rval;
|
||
|
|
u16 destid;
|
||
|
|
|
||
|
|
/* Currently the enumerator node acts also as PW handler */
|
||
|
|
if (!rdev->do_enum)
|
||
|
|
return;
|
||
|
|
|
||
|
|
pr_debug("RIO: %s(%s)\n", __func__, rio_name(rdev));
|
||
|
|
|
||
|
|
rio_read_config_32(rdev, RIO_PW_ROUTE, &rval);
|
||
|
|
i = RIO_GET_PORT_NUM(rdev->swpinfo);
|
||
|
|
|
||
|
|
/* Check port-write destination port */
|
||
|
|
if (!((1 << i) & rval))
|
||
|
|
return;
|
||
|
|
|
||
|
|
/* Disable sending port-write event notifications if PW destID
|
||
|
|
* matches to one of the enumerator node
|
||
|
|
*/
|
||
|
|
rio_read_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TGT_DEVID, &rval);
|
||
|
|
|
||
|
|
if (rval & RIO_EM_PW_TGT_DEVID_DEV16)
|
||
|
|
destid = rval >> 16;
|
||
|
|
else
|
||
|
|
destid = ((rval & RIO_EM_PW_TGT_DEVID_D8) >> 16);
|
||
|
|
|
||
|
|
if (rdev->net->hport->host_deviceid == destid) {
|
||
|
|
rio_write_config_32(rdev,
|
||
|
|
rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
|
||
|
|
pr_debug("RIO: %s(%s) PW transmission disabled\n",
|
||
|
|
__func__, rio_name(rdev));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct rio_device_id idtg3_id_table[] = {
|
||
|
|
{RIO_DEVICE(RIO_DID_IDTRXS1632, RIO_VID_IDT)},
|
||
|
|
{RIO_DEVICE(RIO_DID_IDTRXS2448, RIO_VID_IDT)},
|
||
|
|
{ 0, } /* terminate list */
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct rio_driver idtg3_driver = {
|
||
|
|
.name = "idt_gen3",
|
||
|
|
.id_table = idtg3_id_table,
|
||
|
|
.probe = idtg3_probe,
|
||
|
|
.remove = idtg3_remove,
|
||
|
|
.shutdown = idtg3_shutdown,
|
||
|
|
};
|
||
|
|
|
||
|
|
static int __init idtg3_init(void)
|
||
|
|
{
|
||
|
|
return rio_register_driver(&idtg3_driver);
|
||
|
|
}
|
||
|
|
|
||
|
|
static void __exit idtg3_exit(void)
|
||
|
|
{
|
||
|
|
pr_debug("RIO: %s\n", __func__);
|
||
|
|
rio_unregister_driver(&idtg3_driver);
|
||
|
|
pr_debug("RIO: %s done\n", __func__);
|
||
|
|
}
|
||
|
|
|
||
|
|
device_initcall(idtg3_init);
|
||
|
|
module_exit(idtg3_exit);
|
||
|
|
|
||
|
|
MODULE_DESCRIPTION("IDT RXS Gen.3 Serial RapidIO switch family driver");
|
||
|
|
MODULE_AUTHOR("Integrated Device Technology, Inc.");
|
||
|
|
MODULE_LICENSE("GPL");
|