kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/include/linux/usb/usb338x.h

209 lines
7.3 KiB
C
Raw Normal View History

Initial commit
2023-08-30 17:53:23 +02:00
// SPDX-License-Identifier: GPL-2.0+
/*
* USB 338x super/high/full speed USB device controller.
* Unlike many such controllers, this one talks PCI.
*
* Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
* Copyright (C) 2003 David Brownell
* Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
*/
#ifndef __LINUX_USB_USB338X_H
#define __LINUX_USB_USB338X_H
#include <linux/usb/net2280.h>
/*
* Extra defined bits for net2280 registers
*/
#define SCRATCH 0x0b
#define DEFECT7374_FSM_FIELD 28
#define SUPER_SPEED 8
#define DMA_REQUEST_OUTSTANDING 5
#define DMA_PAUSE_DONE_INTERRUPT 26
#define SET_ISOCHRONOUS_DELAY 24
#define SET_SEL 22
#define SUPER_SPEED_MODE 8
/*ep_cfg*/
#define MAX_BURST_SIZE 24
#define EP_FIFO_BYTE_COUNT 16
#define IN_ENDPOINT_ENABLE 14
#define IN_ENDPOINT_TYPE 12
#define OUT_ENDPOINT_ENABLE 10
#define OUT_ENDPOINT_TYPE 8
#define USB3380_EP_CFG_MASK_IN ((0x3 << IN_ENDPOINT_TYPE) | \
BIT(IN_ENDPOINT_ENABLE))
#define USB3380_EP_CFG_MASK_OUT ((0x3 << OUT_ENDPOINT_TYPE) | \
BIT(OUT_ENDPOINT_ENABLE))
struct usb338x_usb_ext_regs {
u32 usbclass;
#define DEVICE_PROTOCOL 16
#define DEVICE_SUB_CLASS 8
#define DEVICE_CLASS 0
u32 ss_sel;
#define U2_SYSTEM_EXIT_LATENCY 8
#define U1_SYSTEM_EXIT_LATENCY 0
u32 ss_del;
#define U2_DEVICE_EXIT_LATENCY 8
#define U1_DEVICE_EXIT_LATENCY 0
u32 usb2lpm;
#define USB_L1_LPM_HIRD 2
#define USB_L1_LPM_REMOTE_WAKE 1
#define USB_L1_LPM_SUPPORT 0
u32 usb3belt;
#define BELT_MULTIPLIER 10
#define BEST_EFFORT_LATENCY_TOLERANCE 0
u32 usbctl2;
#define LTM_ENABLE 7
#define U2_ENABLE 6
#define U1_ENABLE 5
#define FUNCTION_SUSPEND 4
#define USB3_CORE_ENABLE 3
#define USB2_CORE_ENABLE 2
#define SERIAL_NUMBER_STRING_ENABLE 0
u32 in_timeout;
#define GPEP3_TIMEOUT 19
#define GPEP2_TIMEOUT 18
#define GPEP1_TIMEOUT 17
#define GPEP0_TIMEOUT 16
#define GPEP3_TIMEOUT_VALUE 13
#define GPEP3_TIMEOUT_ENABLE 12
#define GPEP2_TIMEOUT_VALUE 9
#define GPEP2_TIMEOUT_ENABLE 8
#define GPEP1_TIMEOUT_VALUE 5
#define GPEP1_TIMEOUT_ENABLE 4
#define GPEP0_TIMEOUT_VALUE 1
#define GPEP0_TIMEOUT_ENABLE 0
u32 isodelay;
#define ISOCHRONOUS_DELAY 0
} __packed;
struct usb338x_fifo_regs {
/* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */
u32 ep_fifo_size_base;
#define IN_FIFO_BASE_ADDRESS 22
#define IN_FIFO_SIZE 16
#define OUT_FIFO_BASE_ADDRESS 6
#define OUT_FIFO_SIZE 0
u32 ep_fifo_out_wrptr;
u32 ep_fifo_out_rdptr;
u32 ep_fifo_in_wrptr;
u32 ep_fifo_in_rdptr;
u32 unused[3];
} __packed;
/* Link layer */
struct usb338x_ll_regs {
/* offset 0x700 */
u32 ll_ltssm_ctrl1;
u32 ll_ltssm_ctrl2;
u32 ll_ltssm_ctrl3;
u32 unused1;
/* 0x710 */
u32 unused2;
u32 ll_general_ctrl0;
u32 ll_general_ctrl1;
#define PM_U3_AUTO_EXIT 29
#define PM_U2_AUTO_EXIT 28
#define PM_U1_AUTO_EXIT 27
#define PM_FORCE_U2_ENTRY 26
#define PM_FORCE_U1_ENTRY 25
#define PM_LGO_COLLISION_SEND_LAU 24
#define PM_DIR_LINK_REJECT 23
#define PM_FORCE_LINK_ACCEPT 22
#define PM_DIR_ENTRY_U3 20
#define PM_DIR_ENTRY_U2 19
#define PM_DIR_ENTRY_U1 18
#define PM_U2_ENABLE 17
#define PM_U1_ENABLE 16
#define SKP_THRESHOLD_ADJUST_FMW 8
#define RESEND_DPP_ON_LRTY_FMW 7
#define DL_BIT_VALUE_FMW 6
#define FORCE_DL_BIT 5
u32 ll_general_ctrl2;
#define SELECT_INVERT_LANE_POLARITY 7
#define FORCE_INVERT_LANE_POLARITY 6
/* 0x720 */
u32 ll_general_ctrl3;
u32 ll_general_ctrl4;
u32 ll_error_gen;
u32 unused3;
/* 0x730 */
u32 unused4[4];
/* 0x740 */
u32 unused5[2];
u32 ll_lfps_5;
#define TIMER_LFPS_6US 16
u32 ll_lfps_6;
#define TIMER_LFPS_80US 0
/* 0x750 */
u32 unused6[8];
/* 0x770 */
u32 unused7[3];
u32 ll_tsn_counters_2;
#define HOT_TX_NORESET_TS2 24
/* 0x780 */
u32 ll_tsn_counters_3;
#define HOT_RX_RESET_TS2 0
u32 unused8[3];
/* 0x790 */
u32 unused9;
u32 ll_lfps_timers_2;
#define LFPS_TIMERS_2_WORKAROUND_VALUE 0x084d
u32 unused10;
u32 ll_tsn_chicken_bit;
#define RECOVERY_IDLE_TO_RECOVER_FMW 3
} __packed;
/* protocol layer */
struct usb338x_pl_regs {
/* offset 0x800 */
u32 pl_reg_1;
u32 pl_reg_2;
u32 pl_reg_3;
u32 pl_reg_4;
u32 pl_ep_ctrl;
/* Protocol Layer Endpoint Control*/
#define PL_EP_CTRL 0x810
#define ENDPOINT_SELECT 0
/* [4:0] */
#define EP_INITIALIZED 16
#define SEQUENCE_NUMBER_RESET 17
#define CLEAR_ACK_ERROR_CODE 20
u32 pl_reg_6;
u32 pl_reg_7;
u32 pl_reg_8;
u32 pl_ep_status_1;
/* Protocol Layer Endpoint Status 1*/
#define PL_EP_STATUS_1 0x820
#define STATE 16
#define ACK_GOOD_NORMAL 0x11
#define ACK_GOOD_MORE_ACKS_TO_COME 0x16
u32 pl_ep_status_2;
u32 pl_ep_status_3;
/* Protocol Layer Endpoint Status 3*/
#define PL_EP_STATUS_3 0x828
#define SEQUENCE_NUMBER 0
u32 pl_ep_status_4;
/* Protocol Layer Endpoint Status 4*/
#define PL_EP_STATUS_4 0x82c
u32 pl_ep_cfg_4;
/* Protocol Layer Endpoint Configuration 4*/
#define PL_EP_CFG_4 0x830
#define NON_CTRL_IN_TOLERATE_BAD_DIR 6
} __packed;
#endif /* __LINUX_USB_USB338X_H */