340 lines
9.1 KiB
C
340 lines
9.1 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* ASoC machine driver for Intel Broadwell platforms with RT5650 codec
|
||
|
*
|
||
|
* Copyright 2019, The Chromium OS Authors. All rights reserved.
|
||
|
*/
|
||
|
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <sound/core.h>
|
||
|
#include <sound/jack.h>
|
||
|
#include <sound/pcm.h>
|
||
|
#include <sound/pcm_params.h>
|
||
|
#include <sound/soc.h>
|
||
|
#include <sound/soc-acpi.h>
|
||
|
|
||
|
#include "../../codecs/rt5645.h"
|
||
|
|
||
|
struct bdw_rt5650_priv {
|
||
|
struct gpio_desc *gpio_hp_en;
|
||
|
struct snd_soc_component *component;
|
||
|
};
|
||
|
|
||
|
static const struct snd_soc_dapm_widget bdw_rt5650_widgets[] = {
|
||
|
SND_SOC_DAPM_HP("Headphone", NULL),
|
||
|
SND_SOC_DAPM_SPK("Speaker", NULL),
|
||
|
SND_SOC_DAPM_MIC("Headset Mic", NULL),
|
||
|
SND_SOC_DAPM_MIC("DMIC Pair1", NULL),
|
||
|
SND_SOC_DAPM_MIC("DMIC Pair2", NULL),
|
||
|
};
|
||
|
|
||
|
static const struct snd_soc_dapm_route bdw_rt5650_map[] = {
|
||
|
/* Speakers */
|
||
|
{"Speaker", NULL, "SPOL"},
|
||
|
{"Speaker", NULL, "SPOR"},
|
||
|
|
||
|
/* Headset jack connectors */
|
||
|
{"Headphone", NULL, "HPOL"},
|
||
|
{"Headphone", NULL, "HPOR"},
|
||
|
{"IN1P", NULL, "Headset Mic"},
|
||
|
{"IN1N", NULL, "Headset Mic"},
|
||
|
|
||
|
/* Digital MICs
|
||
|
* DMIC Pair1 are the two DMICs connected on the DMICN1 connector.
|
||
|
* DMIC Pair2 are the two DMICs connected on the DMICN2 connector.
|
||
|
* Facing the camera, DMIC Pair1 are on the left side, DMIC Pair2
|
||
|
* are on the right side.
|
||
|
*/
|
||
|
{"DMIC L1", NULL, "DMIC Pair1"},
|
||
|
{"DMIC R1", NULL, "DMIC Pair1"},
|
||
|
{"DMIC L2", NULL, "DMIC Pair2"},
|
||
|
{"DMIC R2", NULL, "DMIC Pair2"},
|
||
|
|
||
|
/* CODEC BE connections */
|
||
|
{"SSP0 CODEC IN", NULL, "AIF1 Capture"},
|
||
|
{"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
|
||
|
};
|
||
|
|
||
|
static const struct snd_kcontrol_new bdw_rt5650_controls[] = {
|
||
|
SOC_DAPM_PIN_SWITCH("Speaker"),
|
||
|
SOC_DAPM_PIN_SWITCH("Headphone"),
|
||
|
SOC_DAPM_PIN_SWITCH("Headset Mic"),
|
||
|
SOC_DAPM_PIN_SWITCH("DMIC Pair1"),
|
||
|
SOC_DAPM_PIN_SWITCH("DMIC Pair2"),
|
||
|
};
|
||
|
|
||
|
|
||
|
static struct snd_soc_jack headphone_jack;
|
||
|
static struct snd_soc_jack mic_jack;
|
||
|
|
||
|
static struct snd_soc_jack_pin headphone_jack_pin = {
|
||
|
.pin = "Headphone",
|
||
|
.mask = SND_JACK_HEADPHONE,
|
||
|
};
|
||
|
|
||
|
static struct snd_soc_jack_pin mic_jack_pin = {
|
||
|
.pin = "Headset Mic",
|
||
|
.mask = SND_JACK_MICROPHONE,
|
||
|
};
|
||
|
|
||
|
static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
|
||
|
struct snd_pcm_hw_params *params)
|
||
|
{
|
||
|
struct snd_interval *rate = hw_param_interval(params,
|
||
|
SNDRV_PCM_HW_PARAM_RATE);
|
||
|
struct snd_interval *chan = hw_param_interval(params,
|
||
|
SNDRV_PCM_HW_PARAM_CHANNELS);
|
||
|
|
||
|
/* The ADSP will convert the FE rate to 48k, max 4-channels */
|
||
|
rate->min = rate->max = 48000;
|
||
|
chan->min = 2;
|
||
|
chan->max = 4;
|
||
|
|
||
|
/* set SSP0 to 24 bit */
|
||
|
snd_mask_set_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
|
||
|
SNDRV_PCM_FORMAT_S24_LE);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream,
|
||
|
struct snd_pcm_hw_params *params)
|
||
|
{
|
||
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
||
|
struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
|
||
|
int ret;
|
||
|
|
||
|
/* Workaround: set codec PLL to 19.2MHz that PLL source is
|
||
|
* from MCLK(24MHz) to conform 2.4MHz DMIC clock.
|
||
|
*/
|
||
|
ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
|
||
|
24000000, 19200000);
|
||
|
if (ret < 0) {
|
||
|
dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* The actual MCLK freq is 24MHz. The codec is told that MCLK is
|
||
|
* 24.576MHz to satisfy the requirement of rl6231_get_clk_info.
|
||
|
* ASRC is enabled on AD and DA filters to ensure good audio quality.
|
||
|
*/
|
||
|
ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1, 24576000,
|
||
|
SND_SOC_CLOCK_IN);
|
||
|
if (ret < 0) {
|
||
|
dev_err(rtd->dev, "can't set codec sysclk configuration\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static struct snd_soc_ops bdw_rt5650_ops = {
|
||
|
.hw_params = bdw_rt5650_hw_params,
|
||
|
};
|
||
|
|
||
|
static const unsigned int channels[] = {
|
||
|
2, 4,
|
||
|
};
|
||
|
|
||
|
static const struct snd_pcm_hw_constraint_list constraints_channels = {
|
||
|
.count = ARRAY_SIZE(channels),
|
||
|
.list = channels,
|
||
|
.mask = 0,
|
||
|
};
|
||
|
|
||
|
static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream)
|
||
|
{
|
||
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
||
|
|
||
|
/* Board supports stereo and quad configurations for capture */
|
||
|
if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
|
||
|
return 0;
|
||
|
|
||
|
runtime->hw.channels_max = 4;
|
||
|
return snd_pcm_hw_constraint_list(runtime, 0,
|
||
|
SNDRV_PCM_HW_PARAM_CHANNELS,
|
||
|
&constraints_channels);
|
||
|
}
|
||
|
|
||
|
static const struct snd_soc_ops bdw_rt5650_fe_ops = {
|
||
|
.startup = bdw_rt5650_fe_startup,
|
||
|
};
|
||
|
|
||
|
static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
|
||
|
{
|
||
|
struct bdw_rt5650_priv *bdw_rt5650 =
|
||
|
snd_soc_card_get_drvdata(rtd->card);
|
||
|
struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
|
||
|
struct snd_soc_component *component = codec_dai->component;
|
||
|
int ret;
|
||
|
|
||
|
/* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
|
||
|
* The ASRC clock source is clk_i2s1_asrc.
|
||
|
*/
|
||
|
rt5645_sel_asrc_clk_src(component,
|
||
|
RT5645_DA_STEREO_FILTER |
|
||
|
RT5645_DA_MONO_L_FILTER |
|
||
|
RT5645_DA_MONO_R_FILTER |
|
||
|
RT5645_AD_STEREO_FILTER |
|
||
|
RT5645_AD_MONO_L_FILTER |
|
||
|
RT5645_AD_MONO_R_FILTER,
|
||
|
RT5645_CLK_SEL_I2S1_ASRC);
|
||
|
|
||
|
/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
|
||
|
ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);
|
||
|
|
||
|
if (ret < 0) {
|
||
|
dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* Create and initialize headphone jack */
|
||
|
if (snd_soc_card_jack_new_pins(rtd->card, "Headphone Jack",
|
||
|
SND_JACK_HEADPHONE, &headphone_jack,
|
||
|
&headphone_jack_pin, 1)) {
|
||
|
dev_err(component->dev, "Can't create headphone jack\n");
|
||
|
}
|
||
|
|
||
|
/* Create and initialize mic jack */
|
||
|
if (snd_soc_card_jack_new_pins(rtd->card, "Mic Jack",
|
||
|
SND_JACK_MICROPHONE, &mic_jack, &mic_jack_pin, 1)) {
|
||
|
dev_err(component->dev, "Can't create mic jack\n");
|
||
|
}
|
||
|
|
||
|
rt5645_set_jack_detect(component, &headphone_jack, &mic_jack, NULL);
|
||
|
|
||
|
bdw_rt5650->component = component;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* broadwell digital audio interface glue - connects codec <--> CPU */
|
||
|
SND_SOC_DAILINK_DEF(dummy,
|
||
|
DAILINK_COMP_ARRAY(COMP_DUMMY()));
|
||
|
|
||
|
SND_SOC_DAILINK_DEF(fe,
|
||
|
DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));
|
||
|
|
||
|
SND_SOC_DAILINK_DEF(platform,
|
||
|
DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio")));
|
||
|
|
||
|
SND_SOC_DAILINK_DEF(be,
|
||
|
DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1")));
|
||
|
|
||
|
SND_SOC_DAILINK_DEF(ssp0_port,
|
||
|
DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
|
||
|
|
||
|
static struct snd_soc_dai_link bdw_rt5650_dais[] = {
|
||
|
/* Front End DAI links */
|
||
|
{
|
||
|
.name = "System PCM",
|
||
|
.stream_name = "System Playback",
|
||
|
.nonatomic = 1,
|
||
|
.dynamic = 1,
|
||
|
.ops = &bdw_rt5650_fe_ops,
|
||
|
.trigger = {
|
||
|
SND_SOC_DPCM_TRIGGER_POST,
|
||
|
SND_SOC_DPCM_TRIGGER_POST
|
||
|
},
|
||
|
.dpcm_playback = 1,
|
||
|
.dpcm_capture = 1,
|
||
|
SND_SOC_DAILINK_REG(fe, dummy, platform),
|
||
|
},
|
||
|
|
||
|
/* Back End DAI links */
|
||
|
{
|
||
|
/* SSP0 - Codec */
|
||
|
.name = "Codec",
|
||
|
.id = 0,
|
||
|
.nonatomic = 1,
|
||
|
.no_pcm = 1,
|
||
|
.dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
|
||
|
SND_SOC_DAIFMT_CBC_CFC,
|
||
|
.ignore_pmdown_time = 1,
|
||
|
.be_hw_params_fixup = broadwell_ssp0_fixup,
|
||
|
.ops = &bdw_rt5650_ops,
|
||
|
.dpcm_playback = 1,
|
||
|
.dpcm_capture = 1,
|
||
|
.init = bdw_rt5650_init,
|
||
|
SND_SOC_DAILINK_REG(ssp0_port, be, platform),
|
||
|
},
|
||
|
};
|
||
|
|
||
|
/* use space before codec name to simplify card ID, and simplify driver name */
|
||
|
#define SOF_CARD_NAME "bdw rt5650" /* card name will be 'sof-bdw rt5650' */
|
||
|
#define SOF_DRIVER_NAME "SOF"
|
||
|
|
||
|
#define CARD_NAME "bdw-rt5650"
|
||
|
#define DRIVER_NAME NULL /* card name will be used for driver name */
|
||
|
|
||
|
/* ASoC machine driver for Broadwell DSP + RT5650 */
|
||
|
static struct snd_soc_card bdw_rt5650_card = {
|
||
|
.name = CARD_NAME,
|
||
|
.driver_name = DRIVER_NAME,
|
||
|
.owner = THIS_MODULE,
|
||
|
.dai_link = bdw_rt5650_dais,
|
||
|
.num_links = ARRAY_SIZE(bdw_rt5650_dais),
|
||
|
.dapm_widgets = bdw_rt5650_widgets,
|
||
|
.num_dapm_widgets = ARRAY_SIZE(bdw_rt5650_widgets),
|
||
|
.dapm_routes = bdw_rt5650_map,
|
||
|
.num_dapm_routes = ARRAY_SIZE(bdw_rt5650_map),
|
||
|
.controls = bdw_rt5650_controls,
|
||
|
.num_controls = ARRAY_SIZE(bdw_rt5650_controls),
|
||
|
.fully_routed = true,
|
||
|
};
|
||
|
|
||
|
static int bdw_rt5650_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct bdw_rt5650_priv *bdw_rt5650;
|
||
|
struct snd_soc_acpi_mach *mach;
|
||
|
int ret;
|
||
|
|
||
|
bdw_rt5650_card.dev = &pdev->dev;
|
||
|
|
||
|
/* Allocate driver private struct */
|
||
|
bdw_rt5650 = devm_kzalloc(&pdev->dev, sizeof(struct bdw_rt5650_priv),
|
||
|
GFP_KERNEL);
|
||
|
if (!bdw_rt5650)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
/* override platform name, if required */
|
||
|
mach = pdev->dev.platform_data;
|
||
|
ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card,
|
||
|
mach->mach_params.platform);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* set card and driver name */
|
||
|
if (snd_soc_acpi_sof_parent(&pdev->dev)) {
|
||
|
bdw_rt5650_card.name = SOF_CARD_NAME;
|
||
|
bdw_rt5650_card.driver_name = SOF_DRIVER_NAME;
|
||
|
} else {
|
||
|
bdw_rt5650_card.name = CARD_NAME;
|
||
|
bdw_rt5650_card.driver_name = DRIVER_NAME;
|
||
|
}
|
||
|
|
||
|
snd_soc_card_set_drvdata(&bdw_rt5650_card, bdw_rt5650);
|
||
|
|
||
|
return devm_snd_soc_register_card(&pdev->dev, &bdw_rt5650_card);
|
||
|
}
|
||
|
|
||
|
static struct platform_driver bdw_rt5650_audio = {
|
||
|
.probe = bdw_rt5650_probe,
|
||
|
.driver = {
|
||
|
.name = "bdw-rt5650",
|
||
|
.pm = &snd_soc_pm_ops,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
module_platform_driver(bdw_rt5650_audio)
|
||
|
|
||
|
/* Module information */
|
||
|
MODULE_AUTHOR("Ben Zhang <benzh@chromium.org>");
|
||
|
MODULE_DESCRIPTION("Intel Broadwell RT5650 machine driver");
|
||
|
MODULE_LICENSE("GPL v2");
|
||
|
MODULE_ALIAS("platform:bdw-rt5650");
|