370 lines
9.6 KiB
Bash
370 lines
9.6 KiB
Bash
|
#!/bin/bash
|
||
|
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
#
|
||
|
|
# Test devlink-trap policer functionality over mlxsw.
|
||
|
|
|
||
|
|
# +---------------------------------+
|
||
|
|
# | H1 (vrf) |
|
||
|
|
# | + $h1 |
|
||
|
|
# | | 192.0.2.1/24 |
|
||
|
|
# | | |
|
||
|
|
# | | default via 192.0.2.2 |
|
||
|
|
# +----|----------------------------+
|
||
|
|
# |
|
||
|
|
# +----|----------------------------------------------------------------------+
|
||
|
|
# | SW | |
|
||
|
|
# | + $rp1 |
|
||
|
|
# | 192.0.2.2/24 |
|
||
|
|
# | |
|
||
|
|
# | 198.51.100.2/24 |
|
||
|
|
# | + $rp2 |
|
||
|
|
# | | |
|
||
|
|
# +----|----------------------------------------------------------------------+
|
||
|
|
# |
|
||
|
|
# +----|----------------------------+
|
||
|
|
# | | default via 198.51.100.2 |
|
||
|
|
# | | |
|
||
|
|
# | | 198.51.100.1/24 |
|
||
|
|
# | + $h2 |
|
||
|
|
# | H2 (vrf) |
|
||
|
|
# +---------------------------------+
|
||
|
|
|
||
|
|
lib_dir=$(dirname $0)/../../../net/forwarding
|
||
|
|
|
||
|
|
ALL_TESTS="
|
||
|
|
rate_limits_test
|
||
|
|
burst_limits_test
|
||
|
|
rate_test
|
||
|
|
burst_test
|
||
|
|
"
|
||
|
|
NUM_NETIFS=4
|
||
|
|
source $lib_dir/tc_common.sh
|
||
|
|
source $lib_dir/lib.sh
|
||
|
|
source $lib_dir/devlink_lib.sh
|
||
|
|
|
||
|
|
h1_create()
|
||
|
|
{
|
||
|
|
simple_if_init $h1 192.0.2.1/24
|
||
|
|
mtu_set $h1 10000
|
||
|
|
|
||
|
|
ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
|
||
|
|
}
|
||
|
|
|
||
|
|
h1_destroy()
|
||
|
|
{
|
||
|
|
ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
|
||
|
|
|
||
|
|
mtu_restore $h1
|
||
|
|
simple_if_fini $h1 192.0.2.1/24
|
||
|
|
}
|
||
|
|
|
||
|
|
h2_create()
|
||
|
|
{
|
||
|
|
simple_if_init $h2 198.51.100.1/24
|
||
|
|
mtu_set $h2 10000
|
||
|
|
|
||
|
|
ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
|
||
|
|
}
|
||
|
|
|
||
|
|
h2_destroy()
|
||
|
|
{
|
||
|
|
ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
|
||
|
|
|
||
|
|
mtu_restore $h2
|
||
|
|
simple_if_fini $h2 198.51.100.1/24
|
||
|
|
}
|
||
|
|
|
||
|
|
router_create()
|
||
|
|
{
|
||
|
|
ip link set dev $rp1 up
|
||
|
|
ip link set dev $rp2 up
|
||
|
|
|
||
|
|
__addr_add_del $rp1 add 192.0.2.2/24
|
||
|
|
__addr_add_del $rp2 add 198.51.100.2/24
|
||
|
|
mtu_set $rp1 10000
|
||
|
|
mtu_set $rp2 10000
|
||
|
|
|
||
|
|
ip -4 route add blackhole 198.51.100.100
|
||
|
|
|
||
|
|
devlink trap set $DEVLINK_DEV trap blackhole_route action trap
|
||
|
|
}
|
||
|
|
|
||
|
|
router_destroy()
|
||
|
|
{
|
||
|
|
devlink trap set $DEVLINK_DEV trap blackhole_route action drop
|
||
|
|
|
||
|
|
ip -4 route del blackhole 198.51.100.100
|
||
|
|
|
||
|
|
mtu_restore $rp2
|
||
|
|
mtu_restore $rp1
|
||
|
|
__addr_add_del $rp2 del 198.51.100.2/24
|
||
|
|
__addr_add_del $rp1 del 192.0.2.2/24
|
||
|
|
|
||
|
|
ip link set dev $rp2 down
|
||
|
|
ip link set dev $rp1 down
|
||
|
|
}
|
||
|
|
|
||
|
|
setup_prepare()
|
||
|
|
{
|
||
|
|
h1=${NETIFS[p1]}
|
||
|
|
rp1=${NETIFS[p2]}
|
||
|
|
|
||
|
|
rp2=${NETIFS[p3]}
|
||
|
|
h2=${NETIFS[p4]}
|
||
|
|
|
||
|
|
rp1_mac=$(mac_get $rp1)
|
||
|
|
|
||
|
|
vrf_prepare
|
||
|
|
|
||
|
|
h1_create
|
||
|
|
h2_create
|
||
|
|
|
||
|
|
router_create
|
||
|
|
}
|
||
|
|
|
||
|
|
cleanup()
|
||
|
|
{
|
||
|
|
pre_cleanup
|
||
|
|
|
||
|
|
router_destroy
|
||
|
|
|
||
|
|
h2_destroy
|
||
|
|
h1_destroy
|
||
|
|
|
||
|
|
vrf_cleanup
|
||
|
|
|
||
|
|
# Reload to ensure devlink-trap settings are back to default.
|
||
|
|
devlink_reload
|
||
|
|
}
|
||
|
|
|
||
|
|
rate_limits_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null
|
||
|
|
check_fail $? "Policer rate was changed to rate lower than limit"
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 \
|
||
|
|
rate 2000000001 &> /dev/null
|
||
|
|
check_fail $? "Policer rate was changed to rate higher than limit"
|
||
|
|
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 rate 1
|
||
|
|
check_err $? "Failed to set policer rate to minimum"
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 rate 2000000000
|
||
|
|
check_err $? "Failed to set policer rate to maximum"
|
||
|
|
|
||
|
|
log_test "Trap policer rate limits"
|
||
|
|
}
|
||
|
|
|
||
|
|
burst_limits_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 burst 0 &> /dev/null
|
||
|
|
check_fail $? "Policer burst size was changed to 0"
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 burst 17 &> /dev/null
|
||
|
|
check_fail $? "Policer burst size was changed to burst size that is not power of 2"
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 burst 8 &> /dev/null
|
||
|
|
check_fail $? "Policer burst size was changed to burst size lower than limit"
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 \
|
||
|
|
burst $((2**25)) &> /dev/null
|
||
|
|
check_fail $? "Policer burst size was changed to burst size higher than limit"
|
||
|
|
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 burst 16
|
||
|
|
check_err $? "Failed to set policer burst size to minimum"
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer 1 burst $((2**24))
|
||
|
|
check_err $? "Failed to set policer burst size to maximum"
|
||
|
|
|
||
|
|
log_test "Trap policer burst size limits"
|
||
|
|
}
|
||
|
|
|
||
|
|
trap_rate_get()
|
||
|
|
{
|
||
|
|
local t0 t1
|
||
|
|
|
||
|
|
t0=$(devlink_trap_rx_packets_get blackhole_route)
|
||
|
|
sleep 10
|
||
|
|
t1=$(devlink_trap_rx_packets_get blackhole_route)
|
||
|
|
|
||
|
|
echo $(((t1 - t0) / 10))
|
||
|
|
}
|
||
|
|
|
||
|
|
policer_drop_rate_get()
|
||
|
|
{
|
||
|
|
local id=$1; shift
|
||
|
|
local t0 t1
|
||
|
|
|
||
|
|
t0=$(devlink_trap_policer_rx_dropped_get $id)
|
||
|
|
sleep 10
|
||
|
|
t1=$(devlink_trap_policer_rx_dropped_get $id)
|
||
|
|
|
||
|
|
echo $(((t1 - t0) / 10))
|
||
|
|
}
|
||
|
|
|
||
|
|
__rate_test()
|
||
|
|
{
|
||
|
|
local rate pct drop_rate
|
||
|
|
local id=$1; shift
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512
|
||
|
|
devlink trap group set $DEVLINK_DEV group l3_drops policer $id
|
||
|
|
|
||
|
|
# Send packets at highest possible rate and make sure they are dropped
|
||
|
|
# by the policer. Make sure measured received rate is about 1000 pps
|
||
|
|
log_info "=== Tx rate: Highest, Policer rate: 1000 pps ==="
|
||
|
|
|
||
|
|
start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac
|
||
|
|
|
||
|
|
sleep 5 # Take measurements when rate is stable
|
||
|
|
|
||
|
|
rate=$(trap_rate_get)
|
||
|
|
pct=$((100 * (rate - 1000) / 1000))
|
||
|
|
((-10 <= pct && pct <= 10))
|
||
|
|
check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-10%"
|
||
|
|
log_info "Expected rate 1000 pps, measured rate $rate pps"
|
||
|
|
|
||
|
|
drop_rate=$(policer_drop_rate_get $id)
|
||
|
|
(( drop_rate > 0 ))
|
||
|
|
check_err $? "Expected non-zero policer drop rate, got 0"
|
||
|
|
log_info "Measured policer drop rate of $drop_rate pps"
|
||
|
|
|
||
|
|
stop_traffic
|
||
|
|
|
||
|
|
# Send packets at a rate of 1000 pps and make sure they are not dropped
|
||
|
|
# by the policer
|
||
|
|
log_info "=== Tx rate: 1000 pps, Policer rate: 1000 pps ==="
|
||
|
|
|
||
|
|
start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -d 1msec
|
||
|
|
|
||
|
|
sleep 5 # Take measurements when rate is stable
|
||
|
|
|
||
|
|
drop_rate=$(policer_drop_rate_get $id)
|
||
|
|
(( drop_rate == 0 ))
|
||
|
|
check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps"
|
||
|
|
log_info "Measured policer drop rate of $drop_rate pps"
|
||
|
|
|
||
|
|
stop_traffic
|
||
|
|
|
||
|
|
# Unbind the policer and send packets at highest possible rate. Make
|
||
|
|
# sure they are not dropped by the policer and that the measured
|
||
|
|
# received rate is higher than 1000 pps
|
||
|
|
log_info "=== Tx rate: Highest, Policer rate: No policer ==="
|
||
|
|
|
||
|
|
devlink trap group set $DEVLINK_DEV group l3_drops nopolicer
|
||
|
|
|
||
|
|
start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac
|
||
|
|
|
||
|
|
rate=$(trap_rate_get)
|
||
|
|
(( rate > 1000 ))
|
||
|
|
check_err $? "Expected rate higher than 1000 pps, got $rate pps"
|
||
|
|
log_info "Measured rate $rate pps"
|
||
|
|
|
||
|
|
drop_rate=$(policer_drop_rate_get $id)
|
||
|
|
(( drop_rate == 0 ))
|
||
|
|
check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps"
|
||
|
|
log_info "Measured policer drop rate of $drop_rate pps"
|
||
|
|
|
||
|
|
stop_traffic
|
||
|
|
|
||
|
|
log_test "Trap policer rate"
|
||
|
|
}
|
||
|
|
|
||
|
|
rate_test()
|
||
|
|
{
|
||
|
|
local last_policer=$(devlink -j -p trap policer show |
|
||
|
|
jq '[.[]["'$DEVLINK_DEV'"][].policer] | max')
|
||
|
|
|
||
|
|
log_info "Running rate test for policer 1"
|
||
|
|
__rate_test 1
|
||
|
|
|
||
|
|
log_info "Running rate test for policer $((last_policer / 2))"
|
||
|
|
__rate_test $((last_policer / 2))
|
||
|
|
|
||
|
|
log_info "Running rate test for policer $last_policer"
|
||
|
|
__rate_test $last_policer
|
||
|
|
}
|
||
|
|
|
||
|
|
__burst_test()
|
||
|
|
{
|
||
|
|
local t0_rx t0_drop t1_rx t1_drop rx drop
|
||
|
|
local id=$1; shift
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512
|
||
|
|
devlink trap group set $DEVLINK_DEV group l3_drops policer $id
|
||
|
|
|
||
|
|
# Send a burst of 16 packets and make sure that 16 are received
|
||
|
|
# and that none are dropped by the policer
|
||
|
|
log_info "=== Tx burst size: 16, Policer burst size: 512 ==="
|
||
|
|
|
||
|
|
t0_rx=$(devlink_trap_rx_packets_get blackhole_route)
|
||
|
|
t0_drop=$(devlink_trap_policer_rx_dropped_get $id)
|
||
|
|
|
||
|
|
start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 16
|
||
|
|
|
||
|
|
t1_rx=$(devlink_trap_rx_packets_get blackhole_route)
|
||
|
|
t1_drop=$(devlink_trap_policer_rx_dropped_get $id)
|
||
|
|
|
||
|
|
rx=$((t1_rx - t0_rx))
|
||
|
|
(( rx == 16 ))
|
||
|
|
check_err $? "Expected burst size of 16 packets, got $rx packets"
|
||
|
|
log_info "Expected burst size of 16 packets, measured burst size of $rx packets"
|
||
|
|
|
||
|
|
drop=$((t1_drop - t0_drop))
|
||
|
|
(( drop == 0 ))
|
||
|
|
check_err $? "Expected zero policer drops, got $drop"
|
||
|
|
log_info "Measured policer drops of $drop packets"
|
||
|
|
|
||
|
|
# Unbind the policer and send a burst of 64 packets. Make sure that
|
||
|
|
# 64 packets are received and that none are dropped by the policer
|
||
|
|
log_info "=== Tx burst size: 64, Policer burst size: No policer ==="
|
||
|
|
|
||
|
|
devlink trap group set $DEVLINK_DEV group l3_drops nopolicer
|
||
|
|
|
||
|
|
t0_rx=$(devlink_trap_rx_packets_get blackhole_route)
|
||
|
|
t0_drop=$(devlink_trap_policer_rx_dropped_get $id)
|
||
|
|
|
||
|
|
start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 64
|
||
|
|
|
||
|
|
t1_rx=$(devlink_trap_rx_packets_get blackhole_route)
|
||
|
|
t1_drop=$(devlink_trap_policer_rx_dropped_get $id)
|
||
|
|
|
||
|
|
rx=$((t1_rx - t0_rx))
|
||
|
|
(( rx == 64 ))
|
||
|
|
check_err $? "Expected burst size of 64 packets, got $rx packets"
|
||
|
|
log_info "Expected burst size of 64 packets, measured burst size of $rx packets"
|
||
|
|
|
||
|
|
drop=$((t1_drop - t0_drop))
|
||
|
|
(( drop == 0 ))
|
||
|
|
check_err $? "Expected zero policer drops, got $drop"
|
||
|
|
log_info "Measured policer drops of $drop packets"
|
||
|
|
|
||
|
|
log_test "Trap policer burst size"
|
||
|
|
}
|
||
|
|
|
||
|
|
burst_test()
|
||
|
|
{
|
||
|
|
local last_policer=$(devlink -j -p trap policer show |
|
||
|
|
jq '[.[]["'$DEVLINK_DEV'"][].policer] | max')
|
||
|
|
|
||
|
|
log_info "Running burst test for policer 1"
|
||
|
|
__burst_test 1
|
||
|
|
|
||
|
|
log_info "Running burst test for policer $((last_policer / 2))"
|
||
|
|
__burst_test $((last_policer / 2))
|
||
|
|
|
||
|
|
log_info "Running burst test for policer $last_policer"
|
||
|
|
__burst_test $last_policer
|
||
|
|
}
|
||
|
|
|
||
|
|
trap cleanup EXIT
|
||
|
|
|
||
|
|
setup_prepare
|
||
|
|
setup_wait
|
||
|
|
|
||
|
|
tests_run
|
||
|
|
|
||
|
|
exit $EXIT_STATUS
|