// SPDX-License-Identifier: GPL-2.0+ /* * DMI based code to deal with broken DSDTs on X86 tablets which ship with * Android as (part of) the factory image. The factory kernels shipped on these * devices typically have a bunch of things hardcoded, rather than specified * in their DSDT. * * Copyright (C) 2021-2022 Hans de Goede */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* For gpio_get_desc() which is EXPORT_SYMBOL_GPL() */ #include "../../gpio/gpiolib.h" #include "../../gpio/gpiolib-acpi.h" /* * Helper code to get Linux IRQ numbers given a description of the IRQ source * (either IOAPIC index, or GPIO chip name + pin-number). */ enum x86_acpi_irq_type { X86_ACPI_IRQ_TYPE_NONE, X86_ACPI_IRQ_TYPE_APIC, X86_ACPI_IRQ_TYPE_GPIOINT, X86_ACPI_IRQ_TYPE_PMIC, }; struct x86_acpi_irq_data { char *chip; /* GPIO chip label (GPIOINT) or PMIC ACPI path (PMIC) */ enum x86_acpi_irq_type type; enum irq_domain_bus_token domain; int index; int trigger; /* ACPI_EDGE_SENSITIVE / ACPI_LEVEL_SENSITIVE */ int polarity; /* ACPI_ACTIVE_HIGH / ACPI_ACTIVE_LOW / ACPI_ACTIVE_BOTH */ }; static int gpiochip_find_match_label(struct gpio_chip *gc, void *data) { return gc->label && !strcmp(gc->label, data); } static int x86_android_tablet_get_gpiod(char *label, int pin, struct gpio_desc **desc) { struct gpio_desc *gpiod; struct gpio_chip *chip; chip = gpiochip_find(label, gpiochip_find_match_label); if (!chip) { pr_err("error cannot find GPIO chip %s\n", label); return -ENODEV; } gpiod = gpiochip_get_desc(chip, pin); if (IS_ERR(gpiod)) { pr_err("error %ld getting GPIO %s %d\n", PTR_ERR(gpiod), label, pin); return PTR_ERR(gpiod); } *desc = gpiod; return 0; } static int x86_acpi_irq_helper_get(const struct x86_acpi_irq_data *data) { struct irq_fwspec fwspec = { }; struct irq_domain *domain; struct acpi_device *adev; struct gpio_desc *gpiod; unsigned int irq_type; acpi_handle handle; acpi_status status; int irq, ret; switch (data->type) { case X86_ACPI_IRQ_TYPE_APIC: /* * The DSDT may already reference the GSI in a device skipped by * acpi_quirk_skip_i2c_client_enumeration(). Unregister the GSI * to avoid EBUSY errors in this case. */ acpi_unregister_gsi(data->index); irq = acpi_register_gsi(NULL, data->index, data->trigger, data->polarity); if (irq < 0) pr_err("error %d getting APIC IRQ %d\n", irq, data->index); return irq; case X86_ACPI_IRQ_TYPE_GPIOINT: /* Like acpi_dev_gpio_irq_get(), but without parsing ACPI resources */ ret = x86_android_tablet_get_gpiod(data->chip, data->index, &gpiod); if (ret) return ret; irq = gpiod_to_irq(gpiod); if (irq < 0) { pr_err("error %d getting IRQ %s %d\n", irq, data->chip, data->index); return irq; } irq_type = acpi_dev_get_irq_type(data->trigger, data->polarity); if (irq_type != IRQ_TYPE_NONE && irq_type != irq_get_trigger_type(irq)) irq_set_irq_type(irq, irq_type); return irq; case X86_ACPI_IRQ_TYPE_PMIC: status = acpi_get_handle(NULL, data->chip, &handle); if (ACPI_FAILURE(status)) { pr_err("error could not get %s handle\n", data->chip); return -ENODEV; } adev = acpi_fetch_acpi_dev(handle); if (!adev) { pr_err("error could not get %s adev\n", data->chip); return -ENODEV; } fwspec.fwnode = acpi_fwnode_handle(adev); domain = irq_find_matching_fwspec(&fwspec, data->domain); if (!domain) { pr_err("error could not find IRQ domain for %s\n", data->chip); return -ENODEV; } return irq_create_mapping(domain, data->index); default: return 0; } } struct x86_i2c_client_info { struct i2c_board_info board_info; char *adapter_path; struct x86_acpi_irq_data irq_data; }; struct x86_serdev_info { const char *ctrl_hid; const char *ctrl_uid; const char *ctrl_devname; /* * ATM the serdev core only supports of or ACPI matching; and sofar all * Android x86 tablets DSDTs have usable serdev nodes, but sometimes * under the wrong controller. So we just tie the existing serdev ACPI * node to the right controller. */ const char *serdev_hid; }; struct x86_dev_info { char *invalid_aei_gpiochip; const char * const *modules; const struct software_node *bat_swnode; struct gpiod_lookup_table * const *gpiod_lookup_tables; const struct x86_i2c_client_info *i2c_client_info; const struct platform_device_info *pdev_info; const struct x86_serdev_info *serdev_info; int i2c_client_count; int pdev_count; int serdev_count; int (*init)(void); void (*exit)(void); }; /* Generic / shared charger / battery settings */ static const char * const tusb1211_chg_det_psy[] = { "tusb1211-charger-detect" }; static const char * const bq24190_psy[] = { "bq24190-charger" }; static const char * const bq25890_psy[] = { "bq25890-charger-0" }; static const struct property_entry fg_bq24190_supply_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_psy), { } }; static const struct software_node fg_bq24190_supply_node = { .properties = fg_bq24190_supply_props, }; static const struct property_entry fg_bq25890_supply_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq25890_psy), { } }; static const struct software_node fg_bq25890_supply_node = { .properties = fg_bq25890_supply_props, }; /* LiPo HighVoltage (max 4.35V) settings used by most devs with a HV bat. */ static const struct property_entry generic_lipo_hv_4v35_battery_props[] = { PROPERTY_ENTRY_STRING("compatible", "simple-battery"), PROPERTY_ENTRY_STRING("device-chemistry", "lithium-ion"), PROPERTY_ENTRY_U32("precharge-current-microamp", 256000), PROPERTY_ENTRY_U32("charge-term-current-microamp", 128000), PROPERTY_ENTRY_U32("constant-charge-current-max-microamp", 1856000), PROPERTY_ENTRY_U32("constant-charge-voltage-max-microvolt", 4352000), PROPERTY_ENTRY_U32("factory-internal-resistance-micro-ohms", 150000), { } }; static const struct software_node generic_lipo_hv_4v35_battery_node = { .properties = generic_lipo_hv_4v35_battery_props, }; /* For enabling the bq24190 5V boost based on id-pin */ static struct regulator_consumer_supply intel_int3496_consumer = { .supply = "vbus", .dev_name = "intel-int3496", }; static const struct regulator_init_data bq24190_vbus_init_data = { .constraints = { .name = "bq24190_vbus", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .consumer_supplies = &intel_int3496_consumer, .num_consumer_supplies = 1, }; static struct bq24190_platform_data bq24190_pdata = { .regulator_init_data = &bq24190_vbus_init_data, }; static const char * const bq24190_modules[] __initconst = { "intel_crystal_cove_charger", /* For the bq24190 IRQ */ "bq24190_charger", /* For the Vbus regulator for intel-int3496 */ NULL }; /* Generic pdevs array and gpio-lookups for micro USB ID pin handling */ static const struct platform_device_info int3496_pdevs[] __initconst = { { /* For micro USB ID pin handling */ .name = "intel-int3496", .id = PLATFORM_DEVID_NONE, }, }; static struct gpiod_lookup_table int3496_gpo2_pin22_gpios = { .dev_id = "intel-int3496", .table = { GPIO_LOOKUP("INT33FC:02", 22, "id", GPIO_ACTIVE_HIGH), { } }, }; static struct gpiod_lookup_table int3496_reference_gpios = { .dev_id = "intel-int3496", .table = { GPIO_LOOKUP("INT33FC:01", 15, "vbus", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT33FC:02", 1, "mux", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT33FC:02", 18, "id", GPIO_ACTIVE_HIGH), { } }, }; /* Acer Iconia One 7 B1-750 has an Android factory img with everything hardcoded */ static const char * const acer_b1_750_mount_matrix[] = { "-1", "0", "0", "0", "1", "0", "0", "0", "1" }; static const struct property_entry acer_b1_750_bma250e_props[] = { PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", acer_b1_750_mount_matrix), { } }; static const struct software_node acer_b1_750_bma250e_node = { .properties = acer_b1_750_bma250e_props, }; static const struct x86_i2c_client_info acer_b1_750_i2c_clients[] __initconst = { { /* Novatek NVT-ts touchscreen */ .board_info = { .type = "NVT-ts", .addr = 0x34, .dev_name = "NVT-ts", }, .adapter_path = "\\_SB_.I2C4", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FC:02", .index = 3, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, }, }, { /* BMA250E accelerometer */ .board_info = { .type = "bma250e", .addr = 0x18, .swnode = &acer_b1_750_bma250e_node, }, .adapter_path = "\\_SB_.I2C3", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FC:02", .index = 25, .trigger = ACPI_LEVEL_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, }, }, }; static struct gpiod_lookup_table acer_b1_750_goodix_gpios = { .dev_id = "i2c-NVT-ts", .table = { GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_LOW), { } }, }; static struct gpiod_lookup_table * const acer_b1_750_gpios[] = { &acer_b1_750_goodix_gpios, &int3496_reference_gpios, NULL }; static const struct x86_dev_info acer_b1_750_info __initconst = { .i2c_client_info = acer_b1_750_i2c_clients, .i2c_client_count = ARRAY_SIZE(acer_b1_750_i2c_clients), .pdev_info = int3496_pdevs, .pdev_count = ARRAY_SIZE(int3496_pdevs), .gpiod_lookup_tables = acer_b1_750_gpios, }; /* * Advantech MICA-071 * This is a standard Windows tablet, but it has an extra "quick launch" button * which is not described in the ACPI tables in anyway. * Use the x86-android-tablets infra to create a gpio-button device for this. */ static struct gpio_keys_button advantech_mica_071_button = { .code = KEY_PROG1, /* .gpio gets filled in by advantech_mica_071_init() */ .active_low = true, .desc = "prog1_key", .type = EV_KEY, .wakeup = false, .debounce_interval = 50, }; static const struct gpio_keys_platform_data advantech_mica_071_button_pdata __initconst = { .buttons = &advantech_mica_071_button, .nbuttons = 1, .name = "prog1_key", }; static const struct platform_device_info advantech_mica_071_pdevs[] __initconst = { { .name = "gpio-keys", .id = PLATFORM_DEVID_AUTO, .data = &advantech_mica_071_button_pdata, .size_data = sizeof(advantech_mica_071_button_pdata), }, }; static int __init advantech_mica_071_init(void) { struct gpio_desc *gpiod; int ret; ret = x86_android_tablet_get_gpiod("INT33FC:00", 2, &gpiod); if (ret < 0) return ret; advantech_mica_071_button.gpio = desc_to_gpio(gpiod); return 0; } static const struct x86_dev_info advantech_mica_071_info __initconst = { .pdev_info = advantech_mica_071_pdevs, .pdev_count = ARRAY_SIZE(advantech_mica_071_pdevs), .init = advantech_mica_071_init, }; /* Asus ME176C and TF103C tablets shared data */ static struct gpio_keys_button asus_me176c_tf103c_lid = { .code = SW_LID, /* .gpio gets filled in by asus_me176c_tf103c_init() */ .active_low = true, .desc = "lid_sw", .type = EV_SW, .wakeup = true, .debounce_interval = 50, }; static const struct gpio_keys_platform_data asus_me176c_tf103c_lid_pdata __initconst = { .buttons = &asus_me176c_tf103c_lid, .nbuttons = 1, .name = "lid_sw", }; static const struct platform_device_info asus_me176c_tf103c_pdevs[] __initconst = { { .name = "gpio-keys", .id = PLATFORM_DEVID_AUTO, .data = &asus_me176c_tf103c_lid_pdata, .size_data = sizeof(asus_me176c_tf103c_lid_pdata), }, { /* For micro USB ID pin handling */ .name = "intel-int3496", .id = PLATFORM_DEVID_NONE, }, }; static int __init asus_me176c_tf103c_init(void) { struct gpio_desc *gpiod; int ret; ret = x86_android_tablet_get_gpiod("INT33FC:02", 12, &gpiod); if (ret < 0) return ret; asus_me176c_tf103c_lid.gpio = desc_to_gpio(gpiod); return 0; } /* Asus ME176C tablets have an Android factory img with everything hardcoded */ static const char * const asus_me176c_accel_mount_matrix[] = { "-1", "0", "0", "0", "1", "0", "0", "0", "1" }; static const struct property_entry asus_me176c_accel_props[] = { PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_me176c_accel_mount_matrix), { } }; static const struct software_node asus_me176c_accel_node = { .properties = asus_me176c_accel_props, }; static const struct property_entry asus_me176c_bq24190_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", tusb1211_chg_det_psy), PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), PROPERTY_ENTRY_U32("ti,system-minimum-microvolt", 3600000), PROPERTY_ENTRY_BOOL("omit-battery-class"), PROPERTY_ENTRY_BOOL("disable-reset"), { } }; static const struct software_node asus_me176c_bq24190_node = { .properties = asus_me176c_bq24190_props, }; static const struct property_entry asus_me176c_ug3105_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_psy), PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), PROPERTY_ENTRY_U32("upisemi,rsns-microohm", 10000), { } }; static const struct software_node asus_me176c_ug3105_node = { .properties = asus_me176c_ug3105_props, }; static const struct x86_i2c_client_info asus_me176c_i2c_clients[] __initconst = { { /* bq24297 battery charger */ .board_info = { .type = "bq24190", .addr = 0x6b, .dev_name = "bq24297", .swnode = &asus_me176c_bq24190_node, .platform_data = &bq24190_pdata, }, .adapter_path = "\\_SB_.I2C1", .irq_data = { .type = X86_ACPI_IRQ_TYPE_PMIC, .chip = "\\_SB_.I2C7.PMIC", .domain = DOMAIN_BUS_WAKEUP, .index = 0, }, }, { /* ug3105 battery monitor */ .board_info = { .type = "ug3105", .addr = 0x70, .dev_name = "ug3105", .swnode = &asus_me176c_ug3105_node, }, .adapter_path = "\\_SB_.I2C1", }, { /* ak09911 compass */ .board_info = { .type = "ak09911", .addr = 0x0c, .dev_name = "ak09911", }, .adapter_path = "\\_SB_.I2C5", }, { /* kxtj21009 accel */ .board_info = { .type = "kxtj21009", .addr = 0x0f, .dev_name = "kxtj21009", .swnode = &asus_me176c_accel_node, }, .adapter_path = "\\_SB_.I2C5", .irq_data = { .type = X86_ACPI_IRQ_TYPE_APIC, .index = 0x44, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, }, }, { /* goodix touchscreen */ .board_info = { .type = "GDIX1001:00", .addr = 0x14, .dev_name = "goodix_ts", }, .adapter_path = "\\_SB_.I2C6", .irq_data = { .type = X86_ACPI_IRQ_TYPE_APIC, .index = 0x45, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, }, }, }; static const struct x86_serdev_info asus_me176c_serdevs[] __initconst = { { .ctrl_hid = "80860F0A", .ctrl_uid = "2", .ctrl_devname = "serial0", .serdev_hid = "BCM2E3A", }, }; static struct gpiod_lookup_table asus_me176c_goodix_gpios = { .dev_id = "i2c-goodix_ts", .table = { GPIO_LOOKUP("INT33FC:00", 60, "reset", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT33FC:02", 28, "irq", GPIO_ACTIVE_HIGH), { } }, }; static struct gpiod_lookup_table * const asus_me176c_gpios[] = { &int3496_gpo2_pin22_gpios, &asus_me176c_goodix_gpios, NULL }; static const struct x86_dev_info asus_me176c_info __initconst = { .i2c_client_info = asus_me176c_i2c_clients, .i2c_client_count = ARRAY_SIZE(asus_me176c_i2c_clients), .pdev_info = asus_me176c_tf103c_pdevs, .pdev_count = ARRAY_SIZE(asus_me176c_tf103c_pdevs), .serdev_info = asus_me176c_serdevs, .serdev_count = ARRAY_SIZE(asus_me176c_serdevs), .gpiod_lookup_tables = asus_me176c_gpios, .bat_swnode = &generic_lipo_hv_4v35_battery_node, .modules = bq24190_modules, .invalid_aei_gpiochip = "INT33FC:02", .init = asus_me176c_tf103c_init, }; /* Asus TF103C tablets have an Android factory img with everything hardcoded */ static const char * const asus_tf103c_accel_mount_matrix[] = { "0", "-1", "0", "-1", "0", "0", "0", "0", "1" }; static const struct property_entry asus_tf103c_accel_props[] = { PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_tf103c_accel_mount_matrix), { } }; static const struct software_node asus_tf103c_accel_node = { .properties = asus_tf103c_accel_props, }; static const struct property_entry asus_tf103c_touchscreen_props[] = { PROPERTY_ENTRY_STRING("compatible", "atmel,atmel_mxt_ts"), { } }; static const struct software_node asus_tf103c_touchscreen_node = { .properties = asus_tf103c_touchscreen_props, }; static const struct property_entry asus_tf103c_battery_props[] = { PROPERTY_ENTRY_STRING("compatible", "simple-battery"), PROPERTY_ENTRY_STRING("device-chemistry", "lithium-ion-polymer"), PROPERTY_ENTRY_U32("precharge-current-microamp", 256000), PROPERTY_ENTRY_U32("charge-term-current-microamp", 128000), PROPERTY_ENTRY_U32("constant-charge-current-max-microamp", 2048000), PROPERTY_ENTRY_U32("constant-charge-voltage-max-microvolt", 4208000), PROPERTY_ENTRY_U32("factory-internal-resistance-micro-ohms", 150000), { } }; static const struct software_node asus_tf103c_battery_node = { .properties = asus_tf103c_battery_props, }; static const struct property_entry asus_tf103c_bq24190_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", tusb1211_chg_det_psy), PROPERTY_ENTRY_REF("monitored-battery", &asus_tf103c_battery_node), PROPERTY_ENTRY_U32("ti,system-minimum-microvolt", 3600000), PROPERTY_ENTRY_BOOL("omit-battery-class"), PROPERTY_ENTRY_BOOL("disable-reset"), { } }; static const struct software_node asus_tf103c_bq24190_node = { .properties = asus_tf103c_bq24190_props, }; static const struct property_entry asus_tf103c_ug3105_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_psy), PROPERTY_ENTRY_REF("monitored-battery", &asus_tf103c_battery_node), PROPERTY_ENTRY_U32("upisemi,rsns-microohm", 5000), { } }; static const struct software_node asus_tf103c_ug3105_node = { .properties = asus_tf103c_ug3105_props, }; static const struct x86_i2c_client_info asus_tf103c_i2c_clients[] __initconst = { { /* bq24297 battery charger */ .board_info = { .type = "bq24190", .addr = 0x6b, .dev_name = "bq24297", .swnode = &asus_tf103c_bq24190_node, .platform_data = &bq24190_pdata, }, .adapter_path = "\\_SB_.I2C1", .irq_data = { .type = X86_ACPI_IRQ_TYPE_PMIC, .chip = "\\_SB_.I2C7.PMIC", .domain = DOMAIN_BUS_WAKEUP, .index = 0, }, }, { /* ug3105 battery monitor */ .board_info = { .type = "ug3105", .addr = 0x70, .dev_name = "ug3105", .swnode = &asus_tf103c_ug3105_node, }, .adapter_path = "\\_SB_.I2C1", }, { /* ak09911 compass */ .board_info = { .type = "ak09911", .addr = 0x0c, .dev_name = "ak09911", }, .adapter_path = "\\_SB_.I2C5", }, { /* kxtj21009 accel */ .board_info = { .type = "kxtj21009", .addr = 0x0f, .dev_name = "kxtj21009", .swnode = &asus_tf103c_accel_node, }, .adapter_path = "\\_SB_.I2C5", }, { /* atmel touchscreen */ .board_info = { .type = "atmel_mxt_ts", .addr = 0x4a, .dev_name = "atmel_mxt_ts", .swnode = &asus_tf103c_touchscreen_node, }, .adapter_path = "\\_SB_.I2C6", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FC:02", .index = 28, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, }, }, }; static struct gpiod_lookup_table * const asus_tf103c_gpios[] = { &int3496_gpo2_pin22_gpios, NULL }; static const struct x86_dev_info asus_tf103c_info __initconst = { .i2c_client_info = asus_tf103c_i2c_clients, .i2c_client_count = ARRAY_SIZE(asus_tf103c_i2c_clients), .pdev_info = asus_me176c_tf103c_pdevs, .pdev_count = ARRAY_SIZE(asus_me176c_tf103c_pdevs), .gpiod_lookup_tables = asus_tf103c_gpios, .bat_swnode = &asus_tf103c_battery_node, .modules = bq24190_modules, .invalid_aei_gpiochip = "INT33FC:02", .init = asus_me176c_tf103c_init, }; /* * When booted with the BIOS set to Android mode the Chuwi Hi8 (CWI509) DSDT * contains a whole bunch of bogus ACPI I2C devices and is missing entries * for the touchscreen and the accelerometer. */ static const struct property_entry chuwi_hi8_gsl1680_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1665), PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi8.fw"), { } }; static const struct software_node chuwi_hi8_gsl1680_node = { .properties = chuwi_hi8_gsl1680_props, }; static const char * const chuwi_hi8_mount_matrix[] = { "1", "0", "0", "0", "-1", "0", "0", "0", "1" }; static const struct property_entry chuwi_hi8_bma250e_props[] = { PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", chuwi_hi8_mount_matrix), { } }; static const struct software_node chuwi_hi8_bma250e_node = { .properties = chuwi_hi8_bma250e_props, }; static const struct x86_i2c_client_info chuwi_hi8_i2c_clients[] __initconst = { { /* Silead touchscreen */ .board_info = { .type = "gsl1680", .addr = 0x40, .swnode = &chuwi_hi8_gsl1680_node, }, .adapter_path = "\\_SB_.I2C4", .irq_data = { .type = X86_ACPI_IRQ_TYPE_APIC, .index = 0x44, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, }, }, { /* BMA250E accelerometer */ .board_info = { .type = "bma250e", .addr = 0x18, .swnode = &chuwi_hi8_bma250e_node, }, .adapter_path = "\\_SB_.I2C3", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FC:02", .index = 23, .trigger = ACPI_LEVEL_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, }, }, }; static int __init chuwi_hi8_init(void) { /* * Avoid the acpi_unregister_gsi() call in x86_acpi_irq_helper_get() * breaking the touchscreen + logging various errors when the Windows * BIOS is used. */ if (acpi_dev_present("MSSL0001", NULL, 1)) return -ENODEV; return 0; } static const struct x86_dev_info chuwi_hi8_info __initconst = { .i2c_client_info = chuwi_hi8_i2c_clients, .i2c_client_count = ARRAY_SIZE(chuwi_hi8_i2c_clients), .init = chuwi_hi8_init, }; #define CZC_EC_EXTRA_PORT 0x68 #define CZC_EC_ANDROID_KEYS 0x63 static int __init czc_p10t_init(void) { /* * The device boots up in "Windows 7" mode, when the home button sends a * Windows specific key sequence (Left Meta + D) and the second button * sends an unknown one while also toggling the Radio Kill Switch. * This is a surprising behavior when the second button is labeled "Back". * * The vendor-supplied Android-x86 build switches the device to a "Android" * mode by writing value 0x63 to the I/O port 0x68. This just seems to just * set bit 6 on address 0x96 in the EC region; switching the bit directly * seems to achieve the same result. It uses a "p10t_switcher" to do the * job. It doesn't seem to be able to do anything else, and no other use * of the port 0x68 is known. * * In the Android mode, the home button sends just a single scancode, * which can be handled in Linux userspace more reasonably and the back * button only sends a scancode without toggling the kill switch. * The scancode can then be mapped either to Back or RF Kill functionality * in userspace, depending on how the button is labeled on that particular * model. */ outb(CZC_EC_ANDROID_KEYS, CZC_EC_EXTRA_PORT); return 0; } static const struct x86_dev_info czc_p10t __initconst = { .init = czc_p10t_init, }; /* Lenovo Yoga Book X90F / X91F / X91L need manual instantiation of the fg client */ static const struct x86_i2c_client_info lenovo_yogabook_x9x_i2c_clients[] __initconst = { { /* BQ27542 fuel-gauge */ .board_info = { .type = "bq27542", .addr = 0x55, .dev_name = "bq27542", .swnode = &fg_bq25890_supply_node, }, .adapter_path = "\\_SB_.PCI0.I2C1", }, }; static const struct x86_dev_info lenovo_yogabook_x9x_info __initconst = { .i2c_client_info = lenovo_yogabook_x9x_i2c_clients, .i2c_client_count = ARRAY_SIZE(lenovo_yogabook_x9x_i2c_clients), }; /* Lenovo Yoga Tablet 2 1050F/L's Android factory img has everything hardcoded */ static const struct property_entry lenovo_yoga_tab2_830_1050_bq24190_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", tusb1211_chg_det_psy), PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), PROPERTY_ENTRY_BOOL("omit-battery-class"), PROPERTY_ENTRY_BOOL("disable-reset"), { } }; static const struct software_node lenovo_yoga_tab2_830_1050_bq24190_node = { .properties = lenovo_yoga_tab2_830_1050_bq24190_props, }; /* This gets filled by lenovo_yoga_tab2_830_1050_init() */ static struct rmi_device_platform_data lenovo_yoga_tab2_830_1050_rmi_pdata = { }; static struct lp855x_platform_data lenovo_yoga_tab2_830_1050_lp8557_pdata = { .device_control = 0x86, .initial_brightness = 128, }; static const struct x86_i2c_client_info lenovo_yoga_tab2_830_1050_i2c_clients[] __initconst = { { /* bq24292i battery charger */ .board_info = { .type = "bq24190", .addr = 0x6b, .dev_name = "bq24292i", .swnode = &lenovo_yoga_tab2_830_1050_bq24190_node, .platform_data = &bq24190_pdata, }, .adapter_path = "\\_SB_.I2C1", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FC:02", .index = 2, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, }, }, { /* BQ27541 fuel-gauge */ .board_info = { .type = "bq27541", .addr = 0x55, .dev_name = "bq27541", .swnode = &fg_bq24190_supply_node, }, .adapter_path = "\\_SB_.I2C1", }, { /* Synaptics RMI touchscreen */ .board_info = { .type = "rmi4_i2c", .addr = 0x38, .dev_name = "rmi4_i2c", .platform_data = &lenovo_yoga_tab2_830_1050_rmi_pdata, }, .adapter_path = "\\_SB_.I2C6", .irq_data = { .type = X86_ACPI_IRQ_TYPE_APIC, .index = 0x45, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, }, }, { /* LP8557 Backlight controller */ .board_info = { .type = "lp8557", .addr = 0x2c, .dev_name = "lp8557", .platform_data = &lenovo_yoga_tab2_830_1050_lp8557_pdata, }, .adapter_path = "\\_SB_.I2C3", }, }; static struct gpiod_lookup_table lenovo_yoga_tab2_830_1050_int3496_gpios = { .dev_id = "intel-int3496", .table = { GPIO_LOOKUP("INT33FC:02", 1, "mux", GPIO_ACTIVE_LOW), GPIO_LOOKUP("INT33FC:02", 24, "id", GPIO_ACTIVE_HIGH), { } }, }; #define LENOVO_YOGA_TAB2_830_1050_CODEC_NAME "spi-10WM5102:00" static struct gpiod_lookup_table lenovo_yoga_tab2_830_1050_codec_gpios = { .dev_id = LENOVO_YOGA_TAB2_830_1050_CODEC_NAME, .table = { GPIO_LOOKUP("gpio_crystalcove", 3, "reset", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT33FC:01", 23, "wlf,ldoena", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("arizona", 2, "wlf,spkvdd-ena", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("arizona", 4, "wlf,micd-pol", GPIO_ACTIVE_LOW), { } }, }; static struct gpiod_lookup_table * const lenovo_yoga_tab2_830_1050_gpios[] = { &lenovo_yoga_tab2_830_1050_int3496_gpios, &lenovo_yoga_tab2_830_1050_codec_gpios, NULL }; static int __init lenovo_yoga_tab2_830_1050_init(void); static void lenovo_yoga_tab2_830_1050_exit(void); static struct x86_dev_info lenovo_yoga_tab2_830_1050_info __initdata = { .i2c_client_info = lenovo_yoga_tab2_830_1050_i2c_clients, /* i2c_client_count gets set by lenovo_yoga_tab2_830_1050_init() */ .pdev_info = int3496_pdevs, .pdev_count = ARRAY_SIZE(int3496_pdevs), .gpiod_lookup_tables = lenovo_yoga_tab2_830_1050_gpios, .bat_swnode = &generic_lipo_hv_4v35_battery_node, .modules = bq24190_modules, .invalid_aei_gpiochip = "INT33FC:02", .init = lenovo_yoga_tab2_830_1050_init, .exit = lenovo_yoga_tab2_830_1050_exit, }; /* * The Lenovo Yoga Tablet 2 830 and 1050 (8" vs 10") versions use the same * mainboard, but they need some different treatment related to the display: * 1. The 830 uses a portrait LCD panel with a landscape touchscreen, requiring * the touchscreen driver to adjust the touch-coords to match the LCD. * 2. Both use an TI LP8557 LED backlight controller. On the 1050 the LP8557's * PWM input is connected to the PMIC's PWM output and everything works fine * with the defaults programmed into the LP8557 by the BIOS. * But on the 830 the LP8557's PWM input is connected to a PWM output coming * from the LCD panel's controller. The Android code has a hack in the i915 * driver to write the non-standard DSI reg 0x9f with the desired backlight * level to set the duty-cycle of the LCD's PWM output. * * To avoid having to have a similar hack in the mainline kernel the LP8557 * entry in lenovo_yoga_tab2_830_1050_i2c_clients instead just programs the * LP8557 to directly set the level, ignoring the PWM input. This means that * the LP8557 i2c_client should only be instantiated on the 830. */ static int __init lenovo_yoga_tab2_830_1050_init_display(void) { struct gpio_desc *gpiod; int ret; /* Use PMIC GPIO 10 bootstrap pin to differentiate 830 vs 1050 */ ret = x86_android_tablet_get_gpiod("gpio_crystalcove", 10, &gpiod); if (ret) return ret; ret = gpiod_get_value_cansleep(gpiod); if (ret) { pr_info("detected Lenovo Yoga Tablet 2 1050F/L\n"); lenovo_yoga_tab2_830_1050_info.i2c_client_count = ARRAY_SIZE(lenovo_yoga_tab2_830_1050_i2c_clients) - 1; } else { pr_info("detected Lenovo Yoga Tablet 2 830F/L\n"); lenovo_yoga_tab2_830_1050_rmi_pdata.sensor_pdata.axis_align.swap_axes = true; lenovo_yoga_tab2_830_1050_rmi_pdata.sensor_pdata.axis_align.flip_y = true; lenovo_yoga_tab2_830_1050_info.i2c_client_count = ARRAY_SIZE(lenovo_yoga_tab2_830_1050_i2c_clients); } return 0; } /* SUS (INT33FC:02) pin 6 needs to be configured as pmu_clk for the audio codec */ static const struct pinctrl_map lenovo_yoga_tab2_830_1050_codec_pinctrl_map = PIN_MAP_MUX_GROUP(LENOVO_YOGA_TAB2_830_1050_CODEC_NAME, "codec_32khz_clk", "INT33FC:02", "pmu_clk2_grp", "pmu_clk"); static struct pinctrl *lenovo_yoga_tab2_830_1050_codec_pinctrl; static struct sys_off_handler *lenovo_yoga_tab2_830_1050_sys_off_handler; static int __init lenovo_yoga_tab2_830_1050_init_codec(void) { struct device *codec_dev; struct pinctrl *pinctrl; int ret; codec_dev = bus_find_device_by_name(&spi_bus_type, NULL, LENOVO_YOGA_TAB2_830_1050_CODEC_NAME); if (!codec_dev) { pr_err("error cannot find %s device\n", LENOVO_YOGA_TAB2_830_1050_CODEC_NAME); return -ENODEV; } ret = pinctrl_register_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map, 1); if (ret) goto err_put_device; pinctrl = pinctrl_get_select(codec_dev, "codec_32khz_clk"); if (IS_ERR(pinctrl)) { ret = dev_err_probe(codec_dev, PTR_ERR(pinctrl), "selecting codec_32khz_clk\n"); goto err_unregister_mappings; } /* We're done with the codec_dev now */ put_device(codec_dev); lenovo_yoga_tab2_830_1050_codec_pinctrl = pinctrl; return 0; err_unregister_mappings: pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map); err_put_device: put_device(codec_dev); return ret; } /* * These tablet's DSDT does not set acpi_gbl_reduced_hardware, so acpi_power_off * gets used as pm_power_off handler. This causes "poweroff" on these tablets * to hang hard. Requiring pressing the powerbutton for 30 seconds *twice* * followed by a normal 3 second press to recover. Avoid this by doing an EFI * poweroff instead. */ static int lenovo_yoga_tab2_830_1050_power_off(struct sys_off_data *data) { efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL); return NOTIFY_DONE; } static int __init lenovo_yoga_tab2_830_1050_init(void) { int ret; ret = lenovo_yoga_tab2_830_1050_init_display(); if (ret) return ret; ret = lenovo_yoga_tab2_830_1050_init_codec(); if (ret) return ret; /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */ lenovo_yoga_tab2_830_1050_sys_off_handler = register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1, lenovo_yoga_tab2_830_1050_power_off, NULL); if (IS_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler)) return PTR_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler); return 0; } static void lenovo_yoga_tab2_830_1050_exit(void) { unregister_sys_off_handler(lenovo_yoga_tab2_830_1050_sys_off_handler); if (lenovo_yoga_tab2_830_1050_codec_pinctrl) { pinctrl_put(lenovo_yoga_tab2_830_1050_codec_pinctrl); pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map); } } /* Lenovo Yoga Tab 3 Pro YT3-X90F */ /* * There are 2 batteries, with 2 bq27500 fuel-gauges and 2 bq25892 chargers, * "bq25890-charger-1" is instantiated from: drivers/i2c/busses/i2c-cht-wc.c. */ static const char * const lenovo_yt3_bq25892_0_suppliers[] = { "cht_wcove_pwrsrc" }; static const char * const bq25890_1_psy[] = { "bq25890-charger-1" }; static const struct property_entry fg_bq25890_1_supply_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq25890_1_psy), { } }; static const struct software_node fg_bq25890_1_supply_node = { .properties = fg_bq25890_1_supply_props, }; /* bq25892 charger settings for the flat lipo battery behind the screen */ static const struct property_entry lenovo_yt3_bq25892_0_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_0_suppliers), PROPERTY_ENTRY_STRING("linux,power-supply-name", "bq25892-second-chrg"), PROPERTY_ENTRY_U32("linux,iinlim-percentage", 40), PROPERTY_ENTRY_BOOL("linux,skip-reset"), /* Values taken from Android Factory Image */ PROPERTY_ENTRY_U32("ti,charge-current", 2048000), PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), PROPERTY_ENTRY_U32("ti,termination-current", 128000), PROPERTY_ENTRY_U32("ti,precharge-current", 128000), PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000), PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), PROPERTY_ENTRY_U32("ti,boost-max-current", 500000), PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), { } }; static const struct software_node lenovo_yt3_bq25892_0_node = { .properties = lenovo_yt3_bq25892_0_props, }; static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { { /* bq27500 fuel-gauge for the flat lipo battery behind the screen */ .board_info = { .type = "bq27500", .addr = 0x55, .dev_name = "bq27500_0", .swnode = &fg_bq25890_supply_node, }, .adapter_path = "\\_SB_.PCI0.I2C1", }, { /* bq25892 charger for the flat lipo battery behind the screen */ .board_info = { .type = "bq25892", .addr = 0x6b, .dev_name = "bq25892_0", .swnode = &lenovo_yt3_bq25892_0_node, }, .adapter_path = "\\_SB_.PCI0.I2C1", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FF:01", .index = 5, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, }, }, { /* bq27500 fuel-gauge for the round li-ion cells in the hinge */ .board_info = { .type = "bq27500", .addr = 0x55, .dev_name = "bq27500_1", .swnode = &fg_bq25890_1_supply_node, }, .adapter_path = "\\_SB_.PCI0.I2C2", } }; static int __init lenovo_yt3_init(void) { struct gpio_desc *gpiod; int ret; /* * The "bq25892_0" charger IC has its /CE (Charge-Enable) and OTG pins * connected to GPIOs, rather then having them hardwired to the correct * values as is normally done. * * The bq25890_charger driver controls these through I2C, but this only * works if not overridden by the pins. Set these pins here: * 1. Set /CE to 0 to allow charging. * 2. Set OTG to 0 disable V5 boost output since the 5V boost output of * the main "bq25892_1" charger is used when necessary. */ /* /CE pin */ ret = x86_android_tablet_get_gpiod("INT33FF:02", 22, &gpiod); if (ret < 0) return ret; /* * The gpio_desc returned by x86_android_tablet_get_gpiod() is a "raw" * gpio_desc, that is there is no way to pass lookup-flags like * GPIO_ACTIVE_LOW. Set the GPIO to 0 here to enable charging since * the /CE pin is active-low, but not marked as such in the gpio_desc. */ gpiod_set_value(gpiod, 0); /* OTG pin */ ret = x86_android_tablet_get_gpiod("INT33FF:03", 19, &gpiod); if (ret < 0) return ret; gpiod_set_value(gpiod, 0); return 0; } static const struct x86_dev_info lenovo_yt3_info __initconst = { .i2c_client_info = lenovo_yt3_i2c_clients, .i2c_client_count = ARRAY_SIZE(lenovo_yt3_i2c_clients), .init = lenovo_yt3_init, }; /* Medion Lifetab S10346 tablets have an Android factory img with everything hardcoded */ static const char * const medion_lifetab_s10346_accel_mount_matrix[] = { "0", "1", "0", "1", "0", "0", "0", "0", "1" }; static const struct property_entry medion_lifetab_s10346_accel_props[] = { PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", medion_lifetab_s10346_accel_mount_matrix), { } }; static const struct software_node medion_lifetab_s10346_accel_node = { .properties = medion_lifetab_s10346_accel_props, }; /* Note the LCD panel is mounted upside down, this is correctly indicated in the VBT */ static const struct property_entry medion_lifetab_s10346_touchscreen_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), { } }; static const struct software_node medion_lifetab_s10346_touchscreen_node = { .properties = medion_lifetab_s10346_touchscreen_props, }; static const struct x86_i2c_client_info medion_lifetab_s10346_i2c_clients[] __initconst = { { /* kxtj21009 accel */ .board_info = { .type = "kxtj21009", .addr = 0x0f, .dev_name = "kxtj21009", .swnode = &medion_lifetab_s10346_accel_node, }, .adapter_path = "\\_SB_.I2C3", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FC:02", .index = 23, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, }, }, { /* goodix touchscreen */ .board_info = { .type = "GDIX1001:00", .addr = 0x14, .dev_name = "goodix_ts", .swnode = &medion_lifetab_s10346_touchscreen_node, }, .adapter_path = "\\_SB_.I2C4", .irq_data = { .type = X86_ACPI_IRQ_TYPE_APIC, .index = 0x44, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, }, }, }; static struct gpiod_lookup_table medion_lifetab_s10346_goodix_gpios = { .dev_id = "i2c-goodix_ts", .table = { GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), { } }, }; static struct gpiod_lookup_table * const medion_lifetab_s10346_gpios[] = { &medion_lifetab_s10346_goodix_gpios, NULL }; static const struct x86_dev_info medion_lifetab_s10346_info __initconst = { .i2c_client_info = medion_lifetab_s10346_i2c_clients, .i2c_client_count = ARRAY_SIZE(medion_lifetab_s10346_i2c_clients), .gpiod_lookup_tables = medion_lifetab_s10346_gpios, }; /* Nextbook Ares 8 tablets have an Android factory img with everything hardcoded */ static const char * const nextbook_ares8_accel_mount_matrix[] = { "0", "-1", "0", "-1", "0", "0", "0", "0", "1" }; static const struct property_entry nextbook_ares8_accel_props[] = { PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", nextbook_ares8_accel_mount_matrix), { } }; static const struct software_node nextbook_ares8_accel_node = { .properties = nextbook_ares8_accel_props, }; static const struct property_entry nextbook_ares8_touchscreen_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 800), PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), { } }; static const struct software_node nextbook_ares8_touchscreen_node = { .properties = nextbook_ares8_touchscreen_props, }; static const struct x86_i2c_client_info nextbook_ares8_i2c_clients[] __initconst = { { /* Freescale MMA8653FC accel */ .board_info = { .type = "mma8653", .addr = 0x1d, .dev_name = "mma8653", .swnode = &nextbook_ares8_accel_node, }, .adapter_path = "\\_SB_.I2C3", }, { /* FT5416DQ9 touchscreen controller */ .board_info = { .type = "edt-ft5x06", .addr = 0x38, .dev_name = "ft5416", .swnode = &nextbook_ares8_touchscreen_node, }, .adapter_path = "\\_SB_.I2C4", .irq_data = { .type = X86_ACPI_IRQ_TYPE_GPIOINT, .chip = "INT33FC:02", .index = 3, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, }, }, }; static struct gpiod_lookup_table * const nextbook_ares8_gpios[] = { &int3496_reference_gpios, NULL }; static const struct x86_dev_info nextbook_ares8_info __initconst = { .i2c_client_info = nextbook_ares8_i2c_clients, .i2c_client_count = ARRAY_SIZE(nextbook_ares8_i2c_clients), .pdev_info = int3496_pdevs, .pdev_count = ARRAY_SIZE(int3496_pdevs), .gpiod_lookup_tables = nextbook_ares8_gpios, .invalid_aei_gpiochip = "INT33FC:02", }; /* * Whitelabel (sold as various brands) TM800A550L tablets. * These tablet's DSDT contains a whole bunch of bogus ACPI I2C devices * (removed through acpi_quirk_skip_i2c_client_enumeration()) and * the touchscreen fwnode has the wrong GPIOs. */ static const char * const whitelabel_tm800a550l_accel_mount_matrix[] = { "-1", "0", "0", "0", "1", "0", "0", "0", "1" }; static const struct property_entry whitelabel_tm800a550l_accel_props[] = { PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", whitelabel_tm800a550l_accel_mount_matrix), { } }; static const struct software_node whitelabel_tm800a550l_accel_node = { .properties = whitelabel_tm800a550l_accel_props, }; static const struct property_entry whitelabel_tm800a550l_goodix_props[] = { PROPERTY_ENTRY_STRING("firmware-name", "gt912-tm800a550l.fw"), PROPERTY_ENTRY_STRING("goodix,config-name", "gt912-tm800a550l.cfg"), PROPERTY_ENTRY_U32("goodix,main-clk", 54), { } }; static const struct software_node whitelabel_tm800a550l_goodix_node = { .properties = whitelabel_tm800a550l_goodix_props, }; static const struct x86_i2c_client_info whitelabel_tm800a550l_i2c_clients[] __initconst = { { /* goodix touchscreen */ .board_info = { .type = "GDIX1001:00", .addr = 0x14, .dev_name = "goodix_ts", .swnode = &whitelabel_tm800a550l_goodix_node, }, .adapter_path = "\\_SB_.I2C2", .irq_data = { .type = X86_ACPI_IRQ_TYPE_APIC, .index = 0x44, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, }, }, { /* kxcj91008 accel */ .board_info = { .type = "kxcj91008", .addr = 0x0f, .dev_name = "kxcj91008", .swnode = &whitelabel_tm800a550l_accel_node, }, .adapter_path = "\\_SB_.I2C3", }, }; static struct gpiod_lookup_table whitelabel_tm800a550l_goodix_gpios = { .dev_id = "i2c-goodix_ts", .table = { GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), { } }, }; static struct gpiod_lookup_table * const whitelabel_tm800a550l_gpios[] = { &whitelabel_tm800a550l_goodix_gpios, NULL }; static const struct x86_dev_info whitelabel_tm800a550l_info __initconst = { .i2c_client_info = whitelabel_tm800a550l_i2c_clients, .i2c_client_count = ARRAY_SIZE(whitelabel_tm800a550l_i2c_clients), .gpiod_lookup_tables = whitelabel_tm800a550l_gpios, }; /* * If the EFI bootloader is not Xiaomi's own signed Android loader, then the * Xiaomi Mi Pad 2 X86 tablet sets OSID in the DSDT to 1 (Windows), causing * a bunch of devices to be hidden. * * This takes care of instantiating the hidden devices manually. */ static const struct x86_i2c_client_info xiaomi_mipad2_i2c_clients[] __initconst = { { /* BQ27520 fuel-gauge */ .board_info = { .type = "bq27520", .addr = 0x55, .dev_name = "bq27520", .swnode = &fg_bq25890_supply_node, }, .adapter_path = "\\_SB_.PCI0.I2C1", }, { /* KTD2026 RGB notification LED controller */ .board_info = { .type = "ktd2026", .addr = 0x30, .dev_name = "ktd2026", }, .adapter_path = "\\_SB_.PCI0.I2C3", }, }; static const struct x86_dev_info xiaomi_mipad2_info __initconst = { .i2c_client_info = xiaomi_mipad2_i2c_clients, .i2c_client_count = ARRAY_SIZE(xiaomi_mipad2_i2c_clients), }; static const struct dmi_system_id x86_android_tablet_ids[] __initconst = { { /* Acer Iconia One 7 B1-750 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), DMI_MATCH(DMI_PRODUCT_NAME, "VESPA2"), }, .driver_data = (void *)&acer_b1_750_info, }, { /* Advantech MICA-071 */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"), }, .driver_data = (void *)&advantech_mica_071_info, }, { /* Asus MeMO Pad 7 ME176C */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ME176C"), }, .driver_data = (void *)&asus_me176c_info, }, { /* Asus TF103C */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), }, .driver_data = (void *)&asus_tf103c_info, }, { /* Chuwi Hi8 (CWI509) */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"), DMI_MATCH(DMI_SYS_VENDOR, "ilife"), DMI_MATCH(DMI_PRODUCT_NAME, "S806"), }, .driver_data = (void *)&chuwi_hi8_info, }, { /* CZC P10T */ .ident = "CZC ODEON TPC-10 (\"P10T\")", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "CZC"), DMI_MATCH(DMI_PRODUCT_NAME, "ODEON*TPC-10"), }, .driver_data = (void *)&czc_p10t, }, { /* CZC P10T variant */ .ident = "ViewSonic ViewPad 10", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ViewSonic"), DMI_MATCH(DMI_PRODUCT_NAME, "VPAD10"), }, .driver_data = (void *)&czc_p10t, }, { /* Lenovo Yoga Book X90F / X91F / X91L */ .matches = { /* Non exact match to match all versions */ DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"), }, .driver_data = (void *)&lenovo_yogabook_x9x_info, }, { /* * Lenovo Yoga Tablet 2 830F/L or 1050F/L (The 8" and 10" * Lenovo Yoga Tablet 2 use the same mainboard) */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."), DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"), DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"), /* Partial match on beginning of BIOS version */ DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"), }, .driver_data = (void *)&lenovo_yoga_tab2_830_1050_info, }, { /* Lenovo Yoga Tab 3 Pro YT3-X90F */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"), }, .driver_data = (void *)&lenovo_yt3_info, }, { /* Medion Lifetab S10346 */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), /* Above strings are much too generic, also match on BIOS date */ DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"), }, .driver_data = (void *)&medion_lifetab_s10346_info, }, { /* Nextbook Ares 8 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), DMI_MATCH(DMI_PRODUCT_NAME, "M890BAP"), }, .driver_data = (void *)&nextbook_ares8_info, }, { /* Whitelabel (sold as various brands) TM800A550L */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), /* Above strings are too generic, also match on BIOS version */ DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"), }, .driver_data = (void *)&whitelabel_tm800a550l_info, }, { /* Xiaomi Mi Pad 2 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"), DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"), }, .driver_data = (void *)&xiaomi_mipad2_info, }, { } }; MODULE_DEVICE_TABLE(dmi, x86_android_tablet_ids); static int i2c_client_count; static int pdev_count; static int serdev_count; static struct i2c_client **i2c_clients; static struct platform_device **pdevs; static struct serdev_device **serdevs; static struct gpiod_lookup_table * const *gpiod_lookup_tables; static const struct software_node *bat_swnode; static void (*exit_handler)(void); static __init int x86_instantiate_i2c_client(const struct x86_dev_info *dev_info, int idx) { const struct x86_i2c_client_info *client_info = &dev_info->i2c_client_info[idx]; struct i2c_board_info board_info = client_info->board_info; struct i2c_adapter *adap; acpi_handle handle; acpi_status status; board_info.irq = x86_acpi_irq_helper_get(&client_info->irq_data); if (board_info.irq < 0) return board_info.irq; status = acpi_get_handle(NULL, client_info->adapter_path, &handle); if (ACPI_FAILURE(status)) { pr_err("Error could not get %s handle\n", client_info->adapter_path); return -ENODEV; } adap = i2c_acpi_find_adapter_by_handle(handle); if (!adap) { pr_err("error could not get %s adapter\n", client_info->adapter_path); return -ENODEV; } i2c_clients[idx] = i2c_new_client_device(adap, &board_info); put_device(&adap->dev); if (IS_ERR(i2c_clients[idx])) return dev_err_probe(&adap->dev, PTR_ERR(i2c_clients[idx]), "creating I2C-client %d\n", idx); return 0; } static __init int x86_instantiate_serdev(const struct x86_serdev_info *info, int idx) { struct acpi_device *ctrl_adev, *serdev_adev; struct serdev_device *serdev; struct device *ctrl_dev; int ret = -ENODEV; ctrl_adev = acpi_dev_get_first_match_dev(info->ctrl_hid, info->ctrl_uid, -1); if (!ctrl_adev) { pr_err("error could not get %s/%s ctrl adev\n", info->ctrl_hid, info->ctrl_uid); return -ENODEV; } serdev_adev = acpi_dev_get_first_match_dev(info->serdev_hid, NULL, -1); if (!serdev_adev) { pr_err("error could not get %s serdev adev\n", info->serdev_hid); goto put_ctrl_adev; } /* get_first_physical_node() returns a weak ref, no need to put() it */ ctrl_dev = acpi_get_first_physical_node(ctrl_adev); if (!ctrl_dev) { pr_err("error could not get %s/%s ctrl physical dev\n", info->ctrl_hid, info->ctrl_uid); goto put_serdev_adev; } /* ctrl_dev now points to the controller's parent, get the controller */ ctrl_dev = device_find_child_by_name(ctrl_dev, info->ctrl_devname); if (!ctrl_dev) { pr_err("error could not get %s/%s %s ctrl dev\n", info->ctrl_hid, info->ctrl_uid, info->ctrl_devname); goto put_serdev_adev; } serdev = serdev_device_alloc(to_serdev_controller(ctrl_dev)); if (!serdev) { ret = -ENOMEM; goto put_serdev_adev; } ACPI_COMPANION_SET(&serdev->dev, serdev_adev); acpi_device_set_enumerated(serdev_adev); ret = serdev_device_add(serdev); if (ret) { dev_err(&serdev->dev, "error %d adding serdev\n", ret); serdev_device_put(serdev); goto put_serdev_adev; } serdevs[idx] = serdev; put_serdev_adev: acpi_dev_put(serdev_adev); put_ctrl_adev: acpi_dev_put(ctrl_adev); return ret; } static void x86_android_tablet_cleanup(void) { int i; for (i = 0; i < serdev_count; i++) { if (serdevs[i]) serdev_device_remove(serdevs[i]); } kfree(serdevs); for (i = 0; i < pdev_count; i++) platform_device_unregister(pdevs[i]); kfree(pdevs); for (i = 0; i < i2c_client_count; i++) i2c_unregister_device(i2c_clients[i]); kfree(i2c_clients); if (exit_handler) exit_handler(); for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) gpiod_remove_lookup_table(gpiod_lookup_tables[i]); software_node_unregister(bat_swnode); } static __init int x86_android_tablet_init(void) { const struct x86_dev_info *dev_info; const struct dmi_system_id *id; struct gpio_chip *chip; int i, ret = 0; id = dmi_first_match(x86_android_tablet_ids); if (!id) return -ENODEV; dev_info = id->driver_data; /* * The broken DSDTs on these devices often also include broken * _AEI (ACPI Event Interrupt) handlers, disable these. */ if (dev_info->invalid_aei_gpiochip) { chip = gpiochip_find(dev_info->invalid_aei_gpiochip, gpiochip_find_match_label); if (!chip) { pr_err("error cannot find GPIO chip %s\n", dev_info->invalid_aei_gpiochip); return -ENODEV; } acpi_gpiochip_free_interrupts(chip); } /* * Since this runs from module_init() it cannot use -EPROBE_DEFER, * instead pre-load any modules which are listed as requirements. */ for (i = 0; dev_info->modules && dev_info->modules[i]; i++) request_module(dev_info->modules[i]); bat_swnode = dev_info->bat_swnode; if (bat_swnode) { ret = software_node_register(bat_swnode); if (ret) return ret; } gpiod_lookup_tables = dev_info->gpiod_lookup_tables; for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) gpiod_add_lookup_table(gpiod_lookup_tables[i]); if (dev_info->init) { ret = dev_info->init(); if (ret < 0) { x86_android_tablet_cleanup(); return ret; } exit_handler = dev_info->exit; } i2c_clients = kcalloc(dev_info->i2c_client_count, sizeof(*i2c_clients), GFP_KERNEL); if (!i2c_clients) { x86_android_tablet_cleanup(); return -ENOMEM; } i2c_client_count = dev_info->i2c_client_count; for (i = 0; i < i2c_client_count; i++) { ret = x86_instantiate_i2c_client(dev_info, i); if (ret < 0) { x86_android_tablet_cleanup(); return ret; } } pdevs = kcalloc(dev_info->pdev_count, sizeof(*pdevs), GFP_KERNEL); if (!pdevs) { x86_android_tablet_cleanup(); return -ENOMEM; } pdev_count = dev_info->pdev_count; for (i = 0; i < pdev_count; i++) { pdevs[i] = platform_device_register_full(&dev_info->pdev_info[i]); if (IS_ERR(pdevs[i])) { x86_android_tablet_cleanup(); return PTR_ERR(pdevs[i]); } } serdevs = kcalloc(dev_info->serdev_count, sizeof(*serdevs), GFP_KERNEL); if (!serdevs) { x86_android_tablet_cleanup(); return -ENOMEM; } serdev_count = dev_info->serdev_count; for (i = 0; i < serdev_count; i++) { ret = x86_instantiate_serdev(&dev_info->serdev_info[i], i); if (ret < 0) { x86_android_tablet_cleanup(); return ret; } } return 0; } module_init(x86_android_tablet_init); module_exit(x86_android_tablet_cleanup); MODULE_AUTHOR("Hans de Goede "); MODULE_DESCRIPTION("X86 Android tablets DSDT fixups driver"); MODULE_LICENSE("GPL");