linux-zen-server/arch/arm/boot/dts/am335x-baltos-ir2110.dts

228 lines
3.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
*/
/*
* VScom OnRISC
* http://www.vscom.de
*/
/dts-v1/;
#include "am335x-baltos.dtsi"
#include "am335x-baltos-leds.dtsi"
/ {
model = "OnRISC Baltos iR 2110";
};
&am33xx_pinmux {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usb0_phy {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
&cpsw_port1 {
phy-mode = "rmii";
ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
&cpsw_port2 {
phy-mode = "rgmii-id";
ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
&gpio0 {
gpio-line-names =
"MDIO",
"MDC",
"NC",
"NC",
"I2C1_SDA",
"I2C1_SCL",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"UART1_CTSN",
"UART1_RTSN",
"UART1_RX",
"UART1_TX",
"onrisc:blue:wlan",
"onrisc:green:app",
"USB0_DRVVBUS",
"ETH2_INT",
"NC",
"RMII1_TXD1",
"MMC1_DAT0",
"MMC1_DAT1",
"NC",
"NC",
"MMC1_DAT2",
"MMC1_DAT3",
"RMII1_TXD0",
"NC",
"GPMC_WAIT0",
"GPMC_WP_N";
};
&gpio1 {
gpio-line-names =
"GPMC_AD0",
"GPMC_AD1",
"GPMC_AD2",
"GPMC_AD3",
"GPMC_AD4",
"GPMC_AD5",
"GPMC_AD6",
"GPMC_AD7",
"NC",
"NC",
"CONSOLE_RX",
"CONSOLE_TX",
"NC",
"NC",
"NC",
"SD_CD",
"RGMII2_TCTL",
"RGMII2_RCTL",
"RGMII2_TD3",
"RGMII2_TD2",
"RGMII2_TD1",
"RGMII2_TD0",
"RGMII2_TCLK",
"RGMII2_RCLK",
"RGMII2_RD3",
"RGMII2_RD2",
"RGMII2_RD1",
"RGMII2_RD0",
"PMIC_INT1",
"GPMC_CSN0_Flash",
"MMC1_CLK",
"MMC1_CMD";
};
&gpio2 {
gpio-line-names =
"GPMC_CSN3_BUS",
"GPMC_CLK",
"GPMC_ADVN_ALE",
"GPMC_OEN_RE_N",
"GPMC_WE_N",
"GPMC_BEN0_CLE",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"SW2_0",
"SW2_1",
"RMII1_RXD1",
"RMII1_RXD0",
"UART1_DTR",
"UART1_DSR",
"UART1_DCD",
"UART1_RI",
"MMC0_DAT3",
"MMC0_DAT2",
"MMC0_DAT1",
"MMC0_DAT0",
"MMC0_CLK",
"MMC0_CMD";
};
&gpio3 {
gpio-line-names =
"onrisc:red:power",
"RMII1_CRS_DV",
"RMII1_RXER",
"RMII1_TXEN",
"NC",
"NC",
"NC",
"WLAN_IRQ",
"WLAN_EN",
"SW2_2",
"SW2_3",
"NC",
"NC",
"NC",
"ModeA0",
"ModeA1",
"ModeA2",
"ModeA3",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC";
};