336 lines
6.2 KiB
Plaintext
336 lines
6.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR MIT
|
|
/*
|
|
* Copyright 2021-2022 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx8mm-verdin.dtsi"
|
|
|
|
/ {
|
|
model = "MENLO MX8MM EMBEDDED DEVICE";
|
|
compatible = "menlo,mx8menlo",
|
|
"toradex,verdin-imx8mm-nonwifi",
|
|
"toradex,verdin-imx8mm",
|
|
"fsl,imx8mm";
|
|
|
|
/delete-node/ gpio-keys;
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_led>;
|
|
|
|
led-1 {
|
|
label = "TestLed601";
|
|
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
led-2 {
|
|
label = "TestLed602";
|
|
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
beeper {
|
|
compatible = "gpio-beeper";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_beeper>;
|
|
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
/* Fixed clock dedicated to SPI CAN on carrier board */
|
|
clk_xtal20: clk-xtal20 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <20000000>;
|
|
};
|
|
};
|
|
|
|
&ecspi1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
/* CAN controller on the baseboard */
|
|
canfd: can@0 {
|
|
compatible = "microchip,mcp2518fd";
|
|
clocks = <&clk_xtal20>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
|
reg = <0>;
|
|
spi-max-frequency = <2000000>;
|
|
};
|
|
|
|
};
|
|
|
|
&ecspi2 {
|
|
pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>;
|
|
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
spidev@0 {
|
|
compatible = "menlo,m53cpld";
|
|
reg = <0>;
|
|
spi-max-frequency = <25000000>;
|
|
};
|
|
|
|
spidev@1 {
|
|
compatible = "menlo,m53cpld";
|
|
reg = <1>;
|
|
spi-max-frequency = <25000000>;
|
|
};
|
|
|
|
};
|
|
|
|
ðphy0 {
|
|
max-speed = <100>;
|
|
};
|
|
|
|
&fec1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&flexspi {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <66000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <4>;
|
|
};
|
|
};
|
|
|
|
&gpio1 {
|
|
gpio-line-names =
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpio2 {
|
|
gpio-line-names =
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpio3 {
|
|
gpio-line-names =
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "DISP_reset", "KBD_intI",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpio4 {
|
|
/*
|
|
* CPLD_D[n] is ARM_CPLD[n] in schematic
|
|
* CPLD_int is SA_INTERRUPT in schematic
|
|
* CPLD_reset is RESET_SOFT in schematic
|
|
*/
|
|
gpio-line-names =
|
|
"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
|
|
"", "CPLD_D[7]", "", "",
|
|
"", "", "", "CPLD_D[5]",
|
|
"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
|
|
"CPLD_D[0]", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "KBD_intK",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpio5 {
|
|
gpio-line-names =
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpio_expander_21 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hwmon {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
/* None of this is present on the SoM. */
|
|
/delete-node/ bridge@2c;
|
|
/delete-node/ hdmi@48;
|
|
/delete-node/ touch@4a;
|
|
/delete-node/ sensor@4f;
|
|
/delete-node/ eeprom@50;
|
|
/delete-node/ eeprom@57;
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>,
|
|
<&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
|
|
|
|
pinctrl_beeper: beepergrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x4
|
|
MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x4
|
|
MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1c4
|
|
MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_led: ledgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4
|
|
MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4_rts: uart4rtsgrp {
|
|
fsl,pins = <
|
|
/* SODIMM 222 */
|
|
MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184
|
|
>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_gpio1 {
|
|
fsl,pins = <
|
|
/* SODIMM 206 */
|
|
MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x1c4
|
|
>;
|
|
};
|
|
|
|
&pinctrl_gpio_hog1 {
|
|
fsl,pins = <
|
|
/* SODIMM 88 */
|
|
MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4
|
|
/* CPLD_int */
|
|
MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4
|
|
/* CPLD_reset */
|
|
MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4
|
|
/* SODIMM 94 */
|
|
MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4
|
|
/* SODIMM 96 */
|
|
MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4
|
|
/* CPLD_D[7] */
|
|
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x184
|
|
/* CPLD_D[6] */
|
|
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x184
|
|
/* CPLD_D[5] */
|
|
MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x184
|
|
/* CPLD_D[4] */
|
|
MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x184
|
|
/* CPLD_D[3] */
|
|
MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x184
|
|
/* CPLD_D[2] */
|
|
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x184
|
|
/* CPLD_D[1] */
|
|
MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x184
|
|
/* CPLD_D[0] */
|
|
MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x184
|
|
/* KBD_intK */
|
|
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4
|
|
/* DISP_reset */
|
|
MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x1c4
|
|
/* KBD_intI */
|
|
MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x1c4
|
|
/* SODIMM 46 */
|
|
MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x1c4
|
|
>;
|
|
};
|
|
|
|
&pinctrl_uart1 {
|
|
fsl,pins = <
|
|
/* SODIMM 149 */
|
|
MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4
|
|
/* SODIMM 147 */
|
|
MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4
|
|
/* SODIMM 210 */
|
|
MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x1c4
|
|
/* SODIMM 212 */
|
|
MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x1c4
|
|
>;
|
|
};
|
|
|
|
®_usb_otg1_vbus {
|
|
/delete-property/ enable-active-high;
|
|
gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
®_usb_otg2_vbus {
|
|
/delete-property/ enable-active-high;
|
|
gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&sai2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart1 {
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>;
|
|
linux,rs485-enabled-at-boot-time;
|
|
rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
status = "okay";
|
|
};
|