kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts

913 lines
23 KiB
Plaintext
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2021-2022 TQ-Systems GmbH
* Author: Alexander Stein <alexander.stein@tq-group.com>
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <dt-bindings/pwm/pwm.h>
#include "imx8mp-tqma8mpql.dtsi"
/ {
model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
chosen {
stdout-path = &uart4;
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>;
};
aliases {
mmc0 = &usdhc3;
mmc1 = &usdhc2;
mmc2 = &usdhc1;
rtc0 = &pcf85063;
rtc1 = &snvs_rtc;
spi0 = &flexspi;
spi1 = &ecspi1;
spi2 = &ecspi2;
spi3 = &ecspi3;
};
backlight_lvds: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
pwms = <&pwm2 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_vcc_12v0>;
enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
clk_xtal25: clk-xtal25 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
fan0: pwm-fan {
compatible = "pwm-fan";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwmfan>;
fan-supply = <&reg_pwm_fan>;
#cooling-cells = <2>;
/* typical 25 kHz -> 40.000 nsec */
pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
cooling-levels = <0 32 64 128 196 240>;
pulses-per-revolution = <2>;
interrupt-parent = <&gpio5>;
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
status = "disabled";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiobutton>;
autorepeat;
switch-1 {
label = "S12";
linux,code = <BTN_0>;
gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
};
switch-2 {
label = "S13";
linux,code = <BTN_1>;
gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpioled>;
led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
function-enumerator = <0>;
gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
led-2 {
color = <LED_COLOR_ID_YELLOW>;
function = LED_FUNCTION_STATUS;
function-enumerator = <1>;
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
};
};
display: display {
/*
* Display is not fixed, so compatible has to be added from
* DT overlay
*/
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lvdsdisplay>;
power-supply = <&reg_vcc_3v3>;
enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
backlight = <&backlight_lvds>;
status = "disabled";
};
reg_pwm_fan: regulator-pwm-fan {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regpwmfan>;
regulator-name = "FAN_PWR";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_vcc_12v0>;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
off-on-delay-us = <12000>;
};
reg_vcc_12v0: regulator-12v0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg12v0>;
regulator-name = "VCC_12V0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_vcc_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_vcc_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "VCC_5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ocram: ocram@900000 {
no-map;
reg = <0 0x900000 0 0x70000>;
};
/* global autoconfigured region for contiguous allocations */
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0 0x38000000>;
alloc-ranges = <0 0x40000000 0 0xB0000000>;
linux,cma-default;
};
};
thermal-zones {
soc-thermal {
trips {
soc_active0: trip-active0 {
temperature = <40000>;
hysteresis = <5000>;
type = "active";
};
soc_active1: trip-active1 {
temperature = <48000>;
hysteresis = <3000>;
type = "active";
};
soc_active2: trip-active2 {
temperature = <60000>;
hysteresis = <10000>;
type = "active";
};
};
cooling-maps {
map1 {
trip = <&soc_active0>;
cooling-device = <&fan0 1 1>;
};
map2 {
trip = <&soc_active1>;
cooling-device = <&fan0 2 2>;
};
map3 {
trip = <&soc_active2>;
cooling-device = <&fan0 3 3>;
};
};
};
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
status = "okay";
adc: adc@0 {
reg = <0>;
compatible = "microchip,mcp3202";
/* 100 ksps * 18 */
spi-max-frequency = <1800000>;
vref-supply = <&reg_vcc_3v3>;
#io-channel-cells = <1>;
};
};
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy3>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy3: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
enet-phy-lane-no-swap;
interrupt-parent = <&gpio4>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
enet-phy-lane-no-swap;
interrupt-parent = <&gpio4>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
};
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_vcc_3v3>;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_vcc_3v3>;
status = "okay";
};
&gpio1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1>;
gpio-line-names = "GPO1", "GPO0", "", "GPO3",
"", "", "GPO2", "GPI0",
"PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
"OTG_PWR", "", "GPI2", "GPI3",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hoggpio2>;
gpio-line-names = "", "", "", "",
"", "", "VCC12V_EN", "PERST#",
"", "", "CLKREQ#", "PEWAKE#",
"USDHC2_CD", "", "", "",
"", "", "", "V_SD3V3_EN",
"", "", "", "",
"", "", "", "",
"", "", "", "";
perst-hog {
gpio-hog;
gpios = <7 0>;
output-high;
line-name = "PERST#";
};
clkreq-hog {
gpio-hog;
gpios = <10 0>;
input;
line-name = "CLKREQ#";
};
pewake-hog {
gpio-hog;
gpios = <11 0>;
input;
line-name = "PEWAKE#";
};
};
&gpio3 {
gpio-line-names = "", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "LVDS0_RESET#", "",
"", "", "", "LVDS0_BLT_EN",
"LVDS0_PWR_EN", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio4>;
gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "DP_IRQ", "DSI_EN",
"HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
"", "", "", "FAN_PWR",
"RTC_EVENT#", "CODEC_RST#", "", "";
pcie-refclkreq-hog {
gpio-hog;
gpios = <22 0>;
output-high;
line-name = "PCIE_REFCLK_OE#";
};
};
&gpio5 {
gpio-line-names = "", "", "", "LED2",
"LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
"CSI0_TRIGGER", "CSI0_ENABLE", "", "",
"", "ECSPI2_SS0", "", "",
"", "", "", "",
"", "", "", "",
"", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
"", "", "", "";
};
&i2c2 {
clock-frequency = <384000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
se97_1c: temperature-sensor@1c {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1c>;
};
at24c02_54: eeprom@54 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x54>;
pagesize = <16>;
vcc-supply = <&reg_vcc_3v3>;
};
pcieclk: clock-generator@6a {
compatible = "renesas,9fgv0241";
reg = <0x6a>;
clocks = <&clk_xtal25>;
#clock-cells = <1>;
};
};
&i2c4 {
clock-frequency = <384000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c4>;
pinctrl-1 = <&pinctrl_i2c4_gpio>;
scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c6 {
clock-frequency = <384000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c6>;
pinctrl-1 = <&pinctrl_i2c6_gpio>;
scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&pcf85063 {
/* RTC_EVENT# is connected on MBa8MPxL */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcf85063>;
interrupt-parent = <&gpio4>;
interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
};
&pcie_phy {
fsl,clkreq-unsupported;
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
clocks = <&pcieclk 0>;
clock-names = "ref";
status = "okay";
};
&pcie {
clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
<&clk IMX8MP_CLK_HSIO_AXI>,
<&clk IMX8MP_CLK_PCIE_ROOT>;
clock-names = "pcie", "pcie_bus", "pcie_aux";
assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
assigned-clock-rates = <10000000>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
status = "okay";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "disabled";
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
assigned-clocks = <&clk IMX8MP_CLK_UART1>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
assigned-clocks = <&clk IMX8MP_CLK_UART2>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clk IMX8MP_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
status = "okay";
};
&uart4 {
/* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usb3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
fsl,over-current-active-low;
status = "okay";
};
&usb3_1 {
fsl,disable-port-power-control;
fsl,permanently-attached;
dr_mode = "host";
status = "okay";
};
&usb3_phy0 {
vbus-supply = <&reg_vcc_5v0>;
status = "okay";
};
&usb3_phy1 {
vbus-supply = <&reg_vcc_5v0>;
status = "okay";
};
&usb_dwc3_0 {
/* dual role is implemented, but not a full featured OTG */
hnp-disable;
srp-disable;
adp-disable;
dr_mode = "otg";
usb-role-switch;
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
type = "micro";
label = "X29";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon0>;
id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
};
&usb_dwc3_1 {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbhub>;
status = "okay";
hub_2_0: hub@1 {
compatible = "usb451,8142";
reg = <1>;
peer-hub = <&hub_3_0>;
reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
vdd-supply = <&reg_vcc_3v3>;
};
hub_3_0: hub@2 {
compatible = "usb451,8140";
reg = <2>;
peer-hub = <&hub_2_0>;
reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
vdd-supply = <&reg_vcc_3v3>;
};
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
no-mmc;
no-sdio;
disable-wp;
bus-width = <4>;
status = "okay";
};
&iomuxc {
pinctrl_backlight: backlightgrp {
fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x14>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x150>,
<MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x150>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x150>,
<MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x150>;
};
/* only on X57, primary used as CSI0 control signals */
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c0>,
<MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1c0>,
<MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1c0>,
<MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c0>;
};
/* on X63 and optionally on X57, can also be used as CSI1 control signals */
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1c0>,
<MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1c0>,
<MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1c0>,
<MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c0>;
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x1c0>,
<MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x1c0>,
<MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>,
<MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x1c0>;
};
pinctrl_eqos: eqosgrp {
fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>,
<MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>,
<MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>,
<MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>,
<MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>,
<MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>,
<MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>,
<MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>,
<MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>,
<MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>,
<MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>,
<MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>,
<MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>,
<MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>;
};
pinctrl_eqos_event: eqosevtgrp {
fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x100>,
<MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1c0>;
};
pinctrl_eqos_phy: eqosphygrp {
fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>,
<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>;
};
pinctrl_fec: fecgrp {
fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>,
<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>,
<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>,
<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>,
<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>,
<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>,
<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>,
<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>,
<MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>,
<MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>,
<MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>,
<MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>,
<MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>,
<MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>;
};
pinctrl_fec_event: fecevtgrp {
fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x100>,
<MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1c0>;
};
pinctrl_fec_phy: fecphygrp {
fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>,
<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>;
};
pinctrl_fec_phyalt: fecphyaltgrp {
fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x180>,
<MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>;
};
pinctrl_gpiobutton: gpiobuttongrp {
fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>,
<MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x10>;
};
pinctrl_gpioled: gpioledgrp {
fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x14>,
<MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x14>,
<MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x14>;
};
pinctrl_gpio1: gpio1grp {
fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x10>,
<MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x10>,
<MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x10>,
<MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x10>,
<MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x80>,
<MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x80>,
<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>,
<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>;
};
pinctrl_gpio4: gpio4grp {
fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x180>,
<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x180>;
};
pinctrl_hdmi: hdmigrp {
fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>,
<MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>,
<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010>,
<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010>;
};
pinctrl_hoggpio2: hoggpio2grp {
fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x140>,
<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x140>,
<MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>,
<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>;
};
pinctrl_i2c2_gpio: i2c2-gpiogrp {
fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>,
<MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e2>,
<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e2>;
};
pinctrl_i2c4_gpio: i2c4-gpiogrp {
fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001e2>,
<MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001e2>;
};
pinctrl_i2c6: i2c6grp {
fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>,
<MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>;
};
pinctrl_i2c6_gpio: i2c6-gpiogrp {
fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>,
<MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>;
};
pinctrl_lvdsdisplay: lvdsdisplaygrp {
fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */
};
pinctrl_pcf85063: pcf85063grp {
fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x80>;
};
/* LVDS Backlight */
pinctrl_pwm2: pwm2grp {
fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>;
};
/* FAN */
pinctrl_pwm3: pwm3grp {
fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>;
};
pinctrl_pwmfan: pwmfangrp {
fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x80>; /* FAN RPM */
};
pinctrl_reg12v0: reg12v0grp {
fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */
};
pinctrl_regpwmfan: regpwmfangrp {
fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x80>;
};
/* X61 */
pinctrl_uart1: uart1grp {
fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>,
<MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x140>;
};
/* X61 */
pinctrl_uart2: uart2grp {
fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x140>,
<MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x140>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>,
<MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>,
<MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>;
};
pinctrl_usb0: usb0grp {
fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x1c0>,
<MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x1c0>;
};
pinctrl_usbcon0: usb0congrp {
fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c0>;
};
pinctrl_usbhub: usbhubgrp {
fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x10>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>,
<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>,
<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
};
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>;
};
};
Reference in New Issue View Git Blame Copy Permalink