986 lines
24 KiB
Plaintext
986 lines
24 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2017, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
model = "Qualcomm Technologies, Inc. IPQ8074";
|
|
compatible = "qcom,ipq8074";
|
|
interrupt-parent = <&intc>;
|
|
|
|
clocks {
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
xo: xo {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <19200000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
next-level-cache = <&L2_0>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
enable-method = "psci";
|
|
reg = <0x1>;
|
|
next-level-cache = <&L2_0>;
|
|
};
|
|
|
|
CPU2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
enable-method = "psci";
|
|
reg = <0x2>;
|
|
next-level-cache = <&L2_0>;
|
|
};
|
|
|
|
CPU3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
enable-method = "psci";
|
|
reg = <0x3>;
|
|
next-level-cache = <&L2_0>;
|
|
};
|
|
|
|
L2_0: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <0x2>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a53-pmu";
|
|
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
smem@4ab00000 {
|
|
compatible = "qcom,smem";
|
|
reg = <0x0 0x4ab00000 0x0 0x00100000>;
|
|
no-map;
|
|
|
|
hwlocks = <&tcsr_mutex 0>;
|
|
};
|
|
|
|
memory@4ac00000 {
|
|
no-map;
|
|
reg = <0x0 0x4ac00000 0x0 0x00400000>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm-ipq8074", "qcom,scm";
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
ranges = <0 0 0 0xffffffff>;
|
|
compatible = "simple-bus";
|
|
|
|
ssphy_1: phy@58000 {
|
|
compatible = "qcom,ipq8074-qmp-usb3-phy";
|
|
reg = <0x00058000 0x1c4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_USB1_AUX_CLK>,
|
|
<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
|
|
<&xo>;
|
|
clock-names = "aux", "cfg_ahb", "ref";
|
|
|
|
resets = <&gcc GCC_USB1_PHY_BCR>,
|
|
<&gcc GCC_USB3PHY_1_PHY_BCR>;
|
|
reset-names = "phy","common";
|
|
status = "disabled";
|
|
|
|
usb1_ssphy: phy@58200 {
|
|
reg = <0x00058200 0x130>, /* Tx */
|
|
<0x00058400 0x200>, /* Rx */
|
|
<0x00058800 0x1f8>, /* PCS */
|
|
<0x00058600 0x044>; /* PCS misc */
|
|
#phy-cells = <0>;
|
|
#clock-cells = <0>;
|
|
clocks = <&gcc GCC_USB1_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "usb3phy_1_cc_pipe_clk";
|
|
};
|
|
};
|
|
|
|
qusb_phy_1: phy@59000 {
|
|
compatible = "qcom,ipq8074-qusb2-phy";
|
|
reg = <0x00059000 0x180>;
|
|
#phy-cells = <0>;
|
|
|
|
clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
|
|
<&xo>;
|
|
clock-names = "cfg_ahb", "ref";
|
|
|
|
resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssphy_0: phy@78000 {
|
|
compatible = "qcom,ipq8074-qmp-usb3-phy";
|
|
reg = <0x00078000 0x1c4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_USB0_AUX_CLK>,
|
|
<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
|
|
<&xo>;
|
|
clock-names = "aux", "cfg_ahb", "ref";
|
|
|
|
resets = <&gcc GCC_USB0_PHY_BCR>,
|
|
<&gcc GCC_USB3PHY_0_PHY_BCR>;
|
|
reset-names = "phy","common";
|
|
status = "disabled";
|
|
|
|
usb0_ssphy: phy@78200 {
|
|
reg = <0x00078200 0x130>, /* Tx */
|
|
<0x00078400 0x200>, /* Rx */
|
|
<0x00078800 0x1f8>, /* PCS */
|
|
<0x00078600 0x044>; /* PCS misc */
|
|
#phy-cells = <0>;
|
|
#clock-cells = <0>;
|
|
clocks = <&gcc GCC_USB0_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "usb3phy_0_cc_pipe_clk";
|
|
};
|
|
};
|
|
|
|
qusb_phy_0: phy@79000 {
|
|
compatible = "qcom,ipq8074-qusb2-phy";
|
|
reg = <0x00079000 0x180>;
|
|
#phy-cells = <0>;
|
|
|
|
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
|
|
<&xo>;
|
|
clock-names = "cfg_ahb", "ref";
|
|
|
|
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie_qmp0: phy@84000 {
|
|
compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
|
|
reg = <0x00084000 0x1bc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_PCIE0_AUX_CLK>,
|
|
<&gcc GCC_PCIE0_AHB_CLK>;
|
|
clock-names = "aux", "cfg_ahb";
|
|
resets = <&gcc GCC_PCIE0_PHY_BCR>,
|
|
<&gcc GCC_PCIE0PHY_PHY_BCR>;
|
|
reset-names = "phy",
|
|
"common";
|
|
status = "disabled";
|
|
|
|
pcie_phy0: phy@84200 {
|
|
reg = <0x84200 0x16c>,
|
|
<0x84400 0x200>,
|
|
<0x84800 0x1f0>,
|
|
<0x84c00 0xf4>;
|
|
#phy-cells = <0>;
|
|
#clock-cells = <0>;
|
|
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "pcie20_phy0_pipe_clk";
|
|
};
|
|
};
|
|
|
|
pcie_qmp1: phy@8e000 {
|
|
compatible = "qcom,ipq8074-qmp-pcie-phy";
|
|
reg = <0x0008e000 0x1c4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_PCIE1_AUX_CLK>,
|
|
<&gcc GCC_PCIE1_AHB_CLK>;
|
|
clock-names = "aux", "cfg_ahb";
|
|
resets = <&gcc GCC_PCIE1_PHY_BCR>,
|
|
<&gcc GCC_PCIE1PHY_PHY_BCR>;
|
|
reset-names = "phy",
|
|
"common";
|
|
status = "disabled";
|
|
|
|
pcie_phy1: phy@8e200 {
|
|
reg = <0x8e200 0x130>,
|
|
<0x8e400 0x200>,
|
|
<0x8e800 0x1f8>;
|
|
#phy-cells = <0>;
|
|
#clock-cells = <0>;
|
|
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "pcie20_phy1_pipe_clk";
|
|
};
|
|
};
|
|
|
|
mdio: mdio@90000 {
|
|
compatible = "qcom,ipq8074-mdio", "qcom,ipq4019-mdio";
|
|
reg = <0x00090000 0x64>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clocks = <&gcc GCC_MDIO_AHB_CLK>;
|
|
clock-names = "gcc_mdio_ahb_clk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
qfprom: efuse@a4000 {
|
|
compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
|
|
reg = <0x000a4000 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
prng: rng@e3000 {
|
|
compatible = "qcom,prng-ee";
|
|
reg = <0x000e3000 0x1000>;
|
|
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
|
clock-names = "core";
|
|
status = "disabled";
|
|
};
|
|
|
|
tsens: thermal-sensor@4a9000 {
|
|
compatible = "qcom,ipq8074-tsens";
|
|
reg = <0x4a9000 0x1000>, /* TM */
|
|
<0x4a8000 0x1000>; /* SROT */
|
|
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "combined";
|
|
#qcom,sensors = <16>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
cryptobam: dma-controller@704000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
reg = <0x00704000 0x20000>;
|
|
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <1>;
|
|
qcom,controlled-remotely;
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto: crypto@73a000 {
|
|
compatible = "qcom,crypto-v5.1";
|
|
reg = <0x0073a000 0x6000>;
|
|
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
|
|
<&gcc GCC_CRYPTO_AXI_CLK>,
|
|
<&gcc GCC_CRYPTO_CLK>;
|
|
clock-names = "iface", "bus", "core";
|
|
dmas = <&cryptobam 2>, <&cryptobam 3>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,ipq8074-pinctrl";
|
|
reg = <0x01000000 0x300000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
gpio-ranges = <&tlmm 0 0 70>;
|
|
#gpio-cells = <0x2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <0x2>;
|
|
|
|
serial_4_pins: serial4-state {
|
|
pins = "gpio23", "gpio24";
|
|
function = "blsp4_uart1";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
i2c_0_pins: i2c-0-state {
|
|
pins = "gpio42", "gpio43";
|
|
function = "blsp1_i2c";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
spi_0_pins: spi-0-state {
|
|
pins = "gpio38", "gpio39", "gpio40", "gpio41";
|
|
function = "blsp0_spi";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
hsuart_pins: hsuart-state {
|
|
pins = "gpio46", "gpio47", "gpio48", "gpio49";
|
|
function = "blsp2_uart";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
qpic_pins: qpic-state {
|
|
pins = "gpio1", "gpio3", "gpio4",
|
|
"gpio5", "gpio6", "gpio7",
|
|
"gpio8", "gpio10", "gpio11",
|
|
"gpio12", "gpio13", "gpio14",
|
|
"gpio15", "gpio16", "gpio17";
|
|
function = "qpic";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
gcc: gcc@1800000 {
|
|
compatible = "qcom,gcc-ipq8074";
|
|
reg = <0x01800000 0x80000>;
|
|
clocks = <&xo>, <&sleep_clk>;
|
|
clock-names = "xo", "sleep_clk";
|
|
#clock-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
tcsr_mutex: hwlock@1905000 {
|
|
compatible = "qcom,tcsr-mutex";
|
|
reg = <0x01905000 0x20000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
spmi_bus: spmi@200f000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0x0200f000 0x001000>,
|
|
<0x02400000 0x800000>,
|
|
<0x02c00000 0x800000>,
|
|
<0x03800000 0x200000>,
|
|
<0x0200a000 0x000700>;
|
|
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
|
|
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "periph_irq";
|
|
qcom,ee = <0>;
|
|
qcom,channel = <0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
cell-index = <0>;
|
|
};
|
|
|
|
sdhc_1: mmc@7824900 {
|
|
compatible = "qcom,sdhci-msm-v4";
|
|
reg = <0x7824900 0x500>, <0x7824000 0x800>;
|
|
reg-names = "hc", "core";
|
|
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
|
|
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
|
|
<&gcc GCC_SDCC1_APPS_CLK>,
|
|
<&xo>;
|
|
clock-names = "iface", "core", "xo";
|
|
resets = <&gcc GCC_SDCC1_BCR>;
|
|
max-frequency = <384000000>;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
bus-width = <8>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp_dma: dma-controller@7884000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
reg = <0x07884000 0x2b000>;
|
|
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
blsp1_uart1: serial@78af000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0x078af000 0x200>;
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_uart3: serial@78b1000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0x078b1000 0x200>;
|
|
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
dmas = <&blsp_dma 4>,
|
|
<&blsp_dma 5>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-0 = <&hsuart_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_uart5: serial@78b3000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0x078b3000 0x200>;
|
|
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
pinctrl-0 = <&serial_4_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_spi1: spi@78b5000 {
|
|
compatible = "qcom,spi-qup-v2.2.1";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x078b5000 0x600>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
spi-max-frequency = <50000000>;
|
|
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_i2c2: i2c@78b6000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x078b6000 0x600>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-0 = <&i2c_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_i2c3: i2c@78b7000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x078b7000 0x600>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <100000>;
|
|
dmas = <&blsp_dma 16>, <&blsp_dma 17>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_i2c5: i2c@78b9000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x78b9000 0x600>;
|
|
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
dmas = <&blsp_dma 20>, <&blsp_dma 21>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_i2c6: i2c@78ba000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x078ba000 0x600>;
|
|
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <100000>;
|
|
dmas = <&blsp_dma 22>, <&blsp_dma 23>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
qpic_bam: dma-controller@7984000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
reg = <0x07984000 0x1a000>;
|
|
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_QPIC_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qpic_nand: nand-controller@79b0000 {
|
|
compatible = "qcom,ipq8074-nand";
|
|
reg = <0x079b0000 0x10000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&gcc GCC_QPIC_CLK>,
|
|
<&gcc GCC_QPIC_AHB_CLK>;
|
|
clock-names = "core", "aon";
|
|
|
|
dmas = <&qpic_bam 0>,
|
|
<&qpic_bam 1>,
|
|
<&qpic_bam 2>;
|
|
dma-names = "tx", "rx", "cmd";
|
|
pinctrl-0 = <&qpic_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_0: usb@8af8800 {
|
|
compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
|
|
reg = <0x08af8800 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
|
|
<&gcc GCC_USB0_MASTER_CLK>,
|
|
<&gcc GCC_USB0_SLEEP_CLK>,
|
|
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
|
|
clock-names = "cfg_noc",
|
|
"core",
|
|
"sleep",
|
|
"mock_utmi";
|
|
|
|
assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
|
|
<&gcc GCC_USB0_MASTER_CLK>,
|
|
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
|
|
assigned-clock-rates = <133330000>,
|
|
<133330000>,
|
|
<19200000>;
|
|
|
|
power-domains = <&gcc USB0_GDSC>;
|
|
|
|
resets = <&gcc GCC_USB0_BCR>;
|
|
status = "disabled";
|
|
|
|
dwc_0: usb@8a00000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x8a00000 0xcd00>;
|
|
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&qusb_phy_0>, <&usb0_ssphy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
snps,is-utmi-l1-suspend;
|
|
snps,hird-threshold = /bits/ 8 <0x0>;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_u3_susphy_quirk;
|
|
dr_mode = "host";
|
|
};
|
|
};
|
|
|
|
usb_1: usb@8cf8800 {
|
|
compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
|
|
reg = <0x08cf8800 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
|
|
<&gcc GCC_USB1_MASTER_CLK>,
|
|
<&gcc GCC_USB1_SLEEP_CLK>,
|
|
<&gcc GCC_USB1_MOCK_UTMI_CLK>;
|
|
clock-names = "cfg_noc",
|
|
"core",
|
|
"sleep",
|
|
"mock_utmi";
|
|
|
|
assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
|
|
<&gcc GCC_USB1_MASTER_CLK>,
|
|
<&gcc GCC_USB1_MOCK_UTMI_CLK>;
|
|
assigned-clock-rates = <133330000>,
|
|
<133330000>,
|
|
<19200000>;
|
|
|
|
power-domains = <&gcc USB1_GDSC>;
|
|
|
|
resets = <&gcc GCC_USB1_BCR>;
|
|
status = "disabled";
|
|
|
|
dwc_1: usb@8c00000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x8c00000 0xcd00>;
|
|
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&qusb_phy_1>, <&usb1_ssphy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
snps,is-utmi-l1-suspend;
|
|
snps,hird-threshold = /bits/ 8 <0x0>;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_u3_susphy_quirk;
|
|
dr_mode = "host";
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@b000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <0x3>;
|
|
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
|
|
ranges = <0 0xb00a000 0xffd>;
|
|
|
|
v2m@0 {
|
|
compatible = "arm,gic-v2m-frame";
|
|
msi-controller;
|
|
reg = <0x0 0xffd>;
|
|
};
|
|
};
|
|
|
|
watchdog: watchdog@b017000 {
|
|
compatible = "qcom,kpss-wdt";
|
|
reg = <0xb017000 0x1000>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&sleep_clk>;
|
|
timeout-sec = <30>;
|
|
};
|
|
|
|
apcs_glb: mailbox@b111000 {
|
|
compatible = "qcom,ipq8074-apcs-apps-global";
|
|
reg = <0x0b111000 0x1000>;
|
|
clocks = <&a53pll>, <&xo>;
|
|
clock-names = "pll", "xo";
|
|
|
|
#clock-cells = <1>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
a53pll: clock@b116000 {
|
|
compatible = "qcom,ipq8074-a53pll";
|
|
reg = <0x0b116000 0x40>;
|
|
#clock-cells = <0>;
|
|
clocks = <&xo>;
|
|
clock-names = "xo";
|
|
};
|
|
|
|
timer@b120000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0x0b120000 0x1000>;
|
|
|
|
frame@b120000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0b121000 0x1000>,
|
|
<0x0b122000 0x1000>;
|
|
};
|
|
|
|
frame@b123000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0b123000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b124000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0b124000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b125000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0b125000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b126000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0b126000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b127000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0b127000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b128000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x0b128000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pcie1: pci@10000000 {
|
|
compatible = "qcom,pcie-ipq8074";
|
|
reg = <0x10000000 0xf1d>,
|
|
<0x10000f20 0xa8>,
|
|
<0x00088000 0x2000>,
|
|
<0x10100000 0x1000>;
|
|
reg-names = "dbi", "elbi", "parf", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <1>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
max-link-speed = <2>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
phys = <&pcie_phy1>;
|
|
phy-names = "pciephy";
|
|
|
|
ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */
|
|
<0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
|
|
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 142
|
|
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
<0 0 0 2 &intc 0 143
|
|
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
<0 0 0 3 &intc 0 144
|
|
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
<0 0 0 4 &intc 0 145
|
|
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
|
|
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
|
|
<&gcc GCC_PCIE1_AXI_M_CLK>,
|
|
<&gcc GCC_PCIE1_AXI_S_CLK>,
|
|
<&gcc GCC_PCIE1_AHB_CLK>,
|
|
<&gcc GCC_PCIE1_AUX_CLK>;
|
|
clock-names = "iface",
|
|
"axi_m",
|
|
"axi_s",
|
|
"ahb",
|
|
"aux";
|
|
resets = <&gcc GCC_PCIE1_PIPE_ARES>,
|
|
<&gcc GCC_PCIE1_SLEEP_ARES>,
|
|
<&gcc GCC_PCIE1_CORE_STICKY_ARES>,
|
|
<&gcc GCC_PCIE1_AXI_MASTER_ARES>,
|
|
<&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
|
|
<&gcc GCC_PCIE1_AHB_ARES>,
|
|
<&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
|
|
reset-names = "pipe",
|
|
"sleep",
|
|
"sticky",
|
|
"axi_m",
|
|
"axi_s",
|
|
"ahb",
|
|
"axi_m_sticky";
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie0: pci@20000000 {
|
|
compatible = "qcom,pcie-ipq8074-gen3";
|
|
reg = <0x20000000 0xf1d>,
|
|
<0x20000f20 0xa8>,
|
|
<0x20001000 0x1000>,
|
|
<0x00080000 0x4000>,
|
|
<0x20100000 0x1000>;
|
|
reg-names = "dbi", "elbi", "atu", "parf", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <0>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
max-link-speed = <3>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
phys = <&pcie_phy0>;
|
|
phy-names = "pciephy";
|
|
|
|
ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */
|
|
<0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
|
|
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 75
|
|
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
<0 0 0 2 &intc 0 78
|
|
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
<0 0 0 3 &intc 0 79
|
|
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
<0 0 0 4 &intc 0 83
|
|
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
|
|
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
|
|
<&gcc GCC_PCIE0_AXI_M_CLK>,
|
|
<&gcc GCC_PCIE0_AXI_S_CLK>,
|
|
<&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
|
|
<&gcc GCC_PCIE0_RCHNG_CLK>;
|
|
clock-names = "iface",
|
|
"axi_m",
|
|
"axi_s",
|
|
"axi_bridge",
|
|
"rchng";
|
|
|
|
resets = <&gcc GCC_PCIE0_PIPE_ARES>,
|
|
<&gcc GCC_PCIE0_SLEEP_ARES>,
|
|
<&gcc GCC_PCIE0_CORE_STICKY_ARES>,
|
|
<&gcc GCC_PCIE0_AXI_MASTER_ARES>,
|
|
<&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
|
|
<&gcc GCC_PCIE0_AHB_ARES>,
|
|
<&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
|
|
<&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
|
|
reset-names = "pipe",
|
|
"sleep",
|
|
"sticky",
|
|
"axi_m",
|
|
"axi_s",
|
|
"ahb",
|
|
"axi_m_sticky",
|
|
"axi_s_sticky";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
thermal-zones {
|
|
nss-top-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 4>;
|
|
};
|
|
|
|
nss0-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 5>;
|
|
};
|
|
|
|
nss1-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 6>;
|
|
};
|
|
|
|
wcss-phya0-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 7>;
|
|
};
|
|
|
|
wcss-phya1-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 8>;
|
|
};
|
|
|
|
cpu0_thermal: cpu0-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 9>;
|
|
};
|
|
|
|
cpu1_thermal: cpu1-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 10>;
|
|
};
|
|
|
|
cpu2_thermal: cpu2-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 11>;
|
|
};
|
|
|
|
cpu3_thermal: cpu3-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 12>;
|
|
};
|
|
|
|
cluster_thermal: cluster-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 13>;
|
|
};
|
|
|
|
wcss-phyb0-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 14>;
|
|
};
|
|
|
|
wcss-phyb1-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 15>;
|
|
};
|
|
};
|
|
};
|