712 lines
15 KiB
Plaintext
712 lines
15 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Xiaomi Mi 6 (sagit) device tree source based on msm8998-mtp.dtsi
|
|
*
|
|
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2022, Degdag Mohamed <degdagmohamed@gmail.com>
|
|
* Copyright (c) 2022, Dzmitry Sankouski <dsankouski@gmail.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "msm8998.dtsi"
|
|
#include "pm8005.dtsi"
|
|
#include "pm8998.dtsi"
|
|
#include "pmi8998.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/*
|
|
* Delete following upstream (msm8998.dtsi) reserved
|
|
* memory mappings which are different in this device.
|
|
*/
|
|
/delete-node/ &adsp_mem;
|
|
/delete-node/ &mpss_mem;
|
|
/delete-node/ &venus_mem;
|
|
/delete-node/ &mba_mem;
|
|
/delete-node/ &slpi_mem;
|
|
/delete-node/ &ipa_fw_mem;
|
|
/delete-node/ &ipa_gsi_mem;
|
|
/delete-node/ &gpu_mem;
|
|
/delete-node/ &wlan_msa_mem;
|
|
|
|
/ {
|
|
model = "Xiaomi Mi 6";
|
|
compatible = "xiaomi,sagit", "qcom,msm8998";
|
|
chassis-type = "handset";
|
|
/* Required for bootloader to select correct board */
|
|
qcom,board-id = <30 0>;
|
|
|
|
reserved-memory {
|
|
/*
|
|
* Xiaomi's ADSP firmware requires 30 MiB in total, so increase the adsp_mem
|
|
* region by 4 MiB to account for this while relocating the other now
|
|
* conflicting memory nodes accordingly.
|
|
*/
|
|
adsp_mem: memory@8b200000 {
|
|
reg = <0x0 0x8b200000 0x0 0x1e00000>;
|
|
no-map;
|
|
};
|
|
|
|
mpss_mem: memory@8d000000 {
|
|
reg = <0x0 0x8d000000 0x0 0x7000000>;
|
|
no-map;
|
|
};
|
|
|
|
venus_mem: memory@94000000 {
|
|
reg = <0x0 0x94000000 0x0 0x500000>;
|
|
no-map;
|
|
};
|
|
|
|
mba_mem: memory@94500000 {
|
|
reg = <0x0 0x94500000 0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
slpi_mem: memory@94700000 {
|
|
reg = <0x0 0x94700000 0x0 0xf00000>;
|
|
no-map;
|
|
};
|
|
|
|
ipa_fw_mem: memory@95600000 {
|
|
reg = <0x0 0x95600000 0x0 0x10000>;
|
|
no-map;
|
|
};
|
|
|
|
ipa_gsi_mem: memory@95610000 {
|
|
reg = <0x0 0x95610000 0x0 0x5000>;
|
|
no-map;
|
|
};
|
|
|
|
gpu_mem: memory@95615000 {
|
|
reg = <0x0 0x95615000 0x0 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
wlan_msa_mem: memory@95715000 {
|
|
reg = <0x0 0x95715000 0x0 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
/* Bootloader display framebuffer region */
|
|
cont_splash_mem: memory@9d400000 {
|
|
reg = <0x0 0x9d400000 0x0 0x2400000>;
|
|
no-map;
|
|
};
|
|
|
|
/* For getting crash logs using Android downstream kernels */
|
|
ramoops@ac000000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0xac000000 0x0 0x200000>;
|
|
console-size = <0x80000>;
|
|
pmsg-size = <0x40000>;
|
|
record-size = <0x8000>;
|
|
ftrace-size = <0x20000>;
|
|
};
|
|
|
|
/*
|
|
* The following memory regions on downstream are "dynamically allocated"
|
|
* but given the same addresses every time. Hard code them as these addresses
|
|
* are where the Xiaomi signed firmware expects them to be.
|
|
*/
|
|
ipa_fws_region: memory@f7800000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x0 0xf7800000 0x0 0x5000>;
|
|
no-map;
|
|
};
|
|
|
|
zap_shader_region: memory@f7900000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x0 0xf7900000 0x0 0x2000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
label = "Volume buttons";
|
|
autorepeat;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vol_up_key_default>;
|
|
|
|
key-vol-up {
|
|
label = "Volume up";
|
|
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
debounce-interval = <15>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
gpio-hall-sensor {
|
|
compatible = "gpio-keys";
|
|
label = "Hall effect sensor";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hall_sensor_default_state>;
|
|
|
|
event-hall-sensor {
|
|
label = "Hall Effect Sensor";
|
|
gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
disp_vddts_vreg: disp-vddts-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "disp-vddts-regulator";
|
|
gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c5 {
|
|
pinctrl-names = "default", "sleep";
|
|
status = "okay";
|
|
|
|
touchscreen@20 {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&ts_active_state>;
|
|
pinctrl-1 = <&ts_int_suspend_state &ts_reset_suspend_state>;
|
|
|
|
vdd-supply = <&disp_vddts_vreg>;
|
|
vio-supply = <&vreg_l6a_1p8>;
|
|
|
|
syna,reset-delay-ms = <20>;
|
|
syna,startup-delay-ms = <20>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x01>;
|
|
syna,nosleep-mode = <1>;
|
|
};
|
|
|
|
rmi4-f12@12 {
|
|
reg = <0x12>;
|
|
touchscreen-x-mm = <64>;
|
|
touchscreen-y-mm = <114>;
|
|
syna,sensor-type = <1>;
|
|
syna,rezero-wait-ms = <20>;
|
|
};
|
|
|
|
rmi4-f1a@1a {
|
|
reg = <0x1a>;
|
|
syna,codes = <KEY_BACK KEY_APPSELECT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c5_sleep {
|
|
/delete-property/ bias-pull-up;
|
|
bias-disable;
|
|
};
|
|
|
|
&blsp1_uart3 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&blsp1_uart3_on {
|
|
rx-pins {
|
|
/delete-property/ bias-disable;
|
|
/*
|
|
* Configure a pull-up on 46 (RX). This is needed to
|
|
* avoid garbage data when the TX pin of the Bluetooth
|
|
* module is in tri-state (module powered off or not
|
|
* driving the signal yet).
|
|
*/
|
|
bias-pull-up;
|
|
};
|
|
|
|
cts-pins {
|
|
/delete-property/ bias-disable;
|
|
/*
|
|
* Configure a pull-down on 47 (CTS) to match the pull
|
|
* of the Bluetooth module.
|
|
*/
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
&blsp2_uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8005_regulators {
|
|
compatible = "qcom,pm8005-regulators";
|
|
|
|
vdd_s1-supply = <&vph_pwr>;
|
|
|
|
pm8005_s1: s1 { /* VDD_GFX supply */
|
|
regulator-min-microvolt = <524000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-enable-ramp-delay = <500>;
|
|
|
|
/* hack until we rig up the gpu consumer */
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&pm8998_gpios {
|
|
vol_up_key_default: vol-up-key-default-state {
|
|
pins = "gpio6";
|
|
function = "normal";
|
|
bias-pull-up;
|
|
input-enable;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
|
};
|
|
|
|
audio_mclk_pin: audio-mclk-pin-active-state {
|
|
pins = "gpio13";
|
|
function = "func2";
|
|
power-source = <0>;
|
|
};
|
|
};
|
|
|
|
&qusb2phy {
|
|
vdd-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rpm_requests {
|
|
regulators-0 {
|
|
compatible = "qcom,rpm-pm8998-regulators";
|
|
|
|
vdd_s1-supply = <&vph_pwr>;
|
|
vdd_s2-supply = <&vph_pwr>;
|
|
vdd_s3-supply = <&vph_pwr>;
|
|
vdd_s4-supply = <&vph_pwr>;
|
|
vdd_s5-supply = <&vph_pwr>;
|
|
vdd_s6-supply = <&vph_pwr>;
|
|
vdd_s7-supply = <&vph_pwr>;
|
|
vdd_s8-supply = <&vph_pwr>;
|
|
vdd_s9-supply = <&vph_pwr>;
|
|
vdd_s10-supply = <&vph_pwr>;
|
|
vdd_s11-supply = <&vph_pwr>;
|
|
vdd_s12-supply = <&vph_pwr>;
|
|
vdd_s13-supply = <&vph_pwr>;
|
|
vdd_l1_l27-supply = <&vreg_s7a_1p025>;
|
|
vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
|
|
vdd_l3_l11-supply = <&vreg_s7a_1p025>;
|
|
vdd_l4_l5-supply = <&vreg_s7a_1p025>;
|
|
vdd_l6-supply = <&vreg_s5a_2p04>;
|
|
vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
|
|
vdd_l9-supply = <&vreg_bob>;
|
|
vdd_l10_l23_l25-supply = <&vreg_bob>;
|
|
vdd_l13_l19_l21-supply = <&vreg_bob>;
|
|
vdd_l16_l28-supply = <&vreg_bob>;
|
|
vdd_l18_l22-supply = <&vreg_bob>;
|
|
vdd_l20_l24-supply = <&vreg_bob>;
|
|
vdd_l26-supply = <&vreg_s3a_1p35>;
|
|
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
|
|
|
|
vreg_s3a_1p35: s3 {
|
|
regulator-min-microvolt = <1352000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_s4a_1p8: s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_s5a_2p04: s5 {
|
|
regulator-min-microvolt = <1904000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
};
|
|
|
|
vreg_s7a_1p025: s7 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1028000>;
|
|
};
|
|
|
|
vreg_l1a_0p875: l1 {
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
};
|
|
|
|
vreg_l2a_1p2: l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vreg_l3a_1p0: l3 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
vreg_l5a_0p8: l5 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <800000>;
|
|
};
|
|
|
|
vreg_l6a_1p8: l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l7a_1p8: l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l8a_1p2: l8 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vreg_l9a_1p8: l9 {
|
|
regulator-min-microvolt = <1808000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
};
|
|
|
|
vreg_l10a_1p8: l10 {
|
|
regulator-min-microvolt = <1808000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
};
|
|
|
|
vreg_l11a_1p0: l11 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
vreg_l12a_1p8: l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l13a_2p95: l13 {
|
|
regulator-min-microvolt = <1808000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
};
|
|
|
|
vreg_l14a_1p8: l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l15a_1p8: l15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l16a_2p7: l16 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2704000>;
|
|
};
|
|
|
|
vreg_l17a_1p3: l17 {
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
};
|
|
|
|
vreg_l18a_2p7: l18 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2704000>;
|
|
};
|
|
|
|
vreg_l19a_3p0: l19 {
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
};
|
|
|
|
vreg_l20a_2p95: l20 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l21a_2p95: l21 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-system-load = <800000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l22a_2p85: l22 {
|
|
regulator-min-microvolt = <2864000>;
|
|
regulator-max-microvolt = <2864000>;
|
|
};
|
|
|
|
vreg_l23a_3p3: l23 {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
};
|
|
|
|
vreg_l24a_3p075: l24 {
|
|
regulator-min-microvolt = <3088000>;
|
|
regulator-max-microvolt = <3088000>;
|
|
};
|
|
|
|
vreg_l25a_3p3: l25 {
|
|
regulator-min-microvolt = <3104000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
};
|
|
|
|
vreg_l26a_1p2: l26 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l28_3p0: l28 {
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
};
|
|
|
|
vreg_lvs1a_1p8: lvs1 { };
|
|
|
|
vreg_lvs2a_1p8: lvs2 { };
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,rpm-pmi8998-regulators";
|
|
|
|
vdd_bob-supply = <&vph_pwr>;
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
|
|
|
cci1_default_state: cci1-default-state {
|
|
pins = "gpio19", "gpio20";
|
|
function = "cci_i2c";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
cdc_reset_n_state: cdc-reset-n-state {
|
|
pins = "gpio64";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
drive-strength = <16>;
|
|
output-high;
|
|
};
|
|
|
|
hall_sensor_default_state: hall-sensor-default-state {
|
|
pins = "gpio124";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
mdss_dsi_active_state: mdss-dsi-active-state {
|
|
pins = "gpio94";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
mdss_dsi_suspend_state: mdss-dsi-suspend-state {
|
|
pins = "gpio94";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
mdss_te_active_state: mdss-te-active-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync_a";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
mdss_te_suspend_state: mdss-te-suspend-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync_a";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
msm_mclk0_active_state: msm-mclk0-active-state {
|
|
pins = "gpio13";
|
|
function = "cam_mclk";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
msm_mclk0_suspend_state: msm-mclk0-suspend-state {
|
|
pins = "gpio13";
|
|
function = "cam_mclk";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
msm_mclk1_active_state: msm-mclk1-active-state {
|
|
pins = "gpio14";
|
|
function = "cam_mclk";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
msm_mclk1_suspend_state: msm-mclk1-suspend-state {
|
|
pins = "gpio14";
|
|
function = "cam_mclk";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
nfc_int_active_state: nfc-int-active-state {
|
|
pins = "gpio92";
|
|
function = "gpio";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
nfc_int_suspend_state: nfc-int-suspend-state {
|
|
pins = "gpio92";
|
|
function = "gpio";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
nfc_enable_active_state: nfc-enable-active-state {
|
|
pins = "gpio12", "gpio116";
|
|
function = "gpio";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
nfc_enable_suspend_state: nfc-enable-suspend-state {
|
|
pins = "gpio12", "gpio116";
|
|
function = "gpio";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
|
|
ts_active_state: ts-active-state {
|
|
pins = "gpio89", "gpio125";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
|
|
ts_int_suspend_state: ts-int-suspend-state {
|
|
pins = "gpio125";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
ts_reset_suspend_state: ts-reset-suspend-state {
|
|
pins = "gpio89";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
wcd_int_n_state: wcd-int-n-state {
|
|
pins = "gpio54";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
drive-strength = <2>;
|
|
input-enable;
|
|
};
|
|
|
|
wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
|
|
pins = "gpio65";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
output-low;
|
|
};
|
|
|
|
wsa_rightspk_pwr_n_state: wsa-rightspk-pwr-n-state {
|
|
pins = "gpio66";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
&pm8998_resin {
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ufshc {
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
|
vccq-supply = <&vreg_l26a_1p2>;
|
|
vccq2-supply = <&vreg_s4a_1p8>;
|
|
vcc-max-microamp = <750000>;
|
|
vccq-max-microamp = <560000>;
|
|
vccq2-max-microamp = <750000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ufsphy {
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l2a_1p2>;
|
|
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3 {
|
|
/* Disable USB3 clock requirement as the device only supports USB2 */
|
|
qcom,select-utmi-as-pipe-clk;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_dwc3 {
|
|
/* Drop the unused USB 3 PHY */
|
|
phys = <&qusb2phy>;
|
|
phy-names = "usb2-phy";
|
|
|
|
/* Fastest mode for USB 2 */
|
|
maximum-speed = "high-speed";
|
|
|
|
/* Force to peripheral until we can switch modes */
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&wifi {
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
|
status = "okay";
|
|
};
|