676 lines
15 KiB
Plaintext
676 lines
15 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
|
*/
|
|
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include "sm8250.dtsi"
|
|
#include "pm8150.dtsi"
|
|
#include "pm8150b.dtsi"
|
|
#include "pm8150l.dtsi"
|
|
#include "pm8009.dtsi"
|
|
|
|
/delete-node/ &adsp_mem;
|
|
/delete-node/ &spss_mem;
|
|
/delete-node/ &cdsp_secure_heap;
|
|
|
|
/ {
|
|
qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
|
|
qcom,board-id = <0x10008 0>;
|
|
|
|
chosen {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
framebuffer: framebuffer@9c000000 {
|
|
compatible = "simple-framebuffer";
|
|
reg = <0 0x9c000000 0 0x2300000>;
|
|
width = <1644>;
|
|
height = <3840>;
|
|
stride = <(1644 * 4)>;
|
|
format = "a8r8g8b8";
|
|
/*
|
|
* That's a lot of clocks, but it's necessary due
|
|
* to unused clk cleanup & no panel driver yet..
|
|
*/
|
|
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
|
|
<&gcc GCC_DISP_HF_AXI_CLK>,
|
|
<&gcc GCC_DISP_SF_AXI_CLK>,
|
|
<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
|
|
<&dispcc DISP_CC_MDSS_MDP_CLK>,
|
|
<&dispcc DISP_CC_MDSS_BYTE0_CLK>,
|
|
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
|
|
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
|
|
<&dispcc DISP_CC_MDSS_ESC0_CLK>;
|
|
power-domains = <&dispcc MDSS_GDSC>;
|
|
};
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
/*
|
|
* Camera focus (light press) and camera snapshot (full press)
|
|
* seem not to work properly.. Adding the former one stalls the CPU
|
|
* and the latter kills the volume down key for whatever reason. In any
|
|
* case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
|
|
*/
|
|
|
|
key-vol-down {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
};
|
|
|
|
/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
|
|
vreg_s6c_0p88: smpc6-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vreg_s6c_0p88";
|
|
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vph_pwr>;
|
|
};
|
|
|
|
reserved-memory {
|
|
adsp_mem: memory@8a100000 {
|
|
reg = <0x0 0x8a100000 0x0 0x2500000>;
|
|
no-map;
|
|
};
|
|
|
|
spss_mem: memory@8c600000 {
|
|
reg = <0x0 0x8c600000 0x0 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
cdsp_secure_heap: memory@8c700000 {
|
|
reg = <0x0 0x8c700000 0x0 0x4600000>;
|
|
no-map;
|
|
};
|
|
|
|
cont_splash_mem: memory@9c000000 {
|
|
reg = <0x0 0x9c000000 0x0 0x2300000>;
|
|
no-map;
|
|
};
|
|
|
|
ramoops@ffc00000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0xffc00000 0x0 0x100000>;
|
|
record-size = <0x1000>;
|
|
console-size = <0x40000>;
|
|
msg-size = <0x20000 0x20000>;
|
|
ecc-size = <16>;
|
|
no-map;
|
|
};
|
|
};
|
|
};
|
|
|
|
&adsp {
|
|
status = "okay";
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pm8150-rpmh-regulators";
|
|
qcom,pmic-id = "a";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
vdd-s7-supply = <&vph_pwr>;
|
|
vdd-s8-supply = <&vph_pwr>;
|
|
vdd-s9-supply = <&vph_pwr>;
|
|
vdd-s10-supply = <&vph_pwr>;
|
|
vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
|
|
vdd-l2-l10-supply = <&vreg_bob>;
|
|
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
|
|
vdd-l6-l9-supply = <&vreg_s8c_1p2>;
|
|
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
|
|
vdd-l13-l16-l17-supply = <&vreg_bob>;
|
|
|
|
/* (S1+S2+S3) - cx.lvl (ARC) */
|
|
|
|
vreg_s4a_1p8: smps4 {
|
|
regulator-name = "vreg_s4a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s5a_1p9: smps5 {
|
|
regulator-name = "vreg_s5a_1p9";
|
|
regulator-min-microvolt = <1824000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s6a_0p6: smps6 {
|
|
regulator-name = "vreg_s6a_0p6";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1128000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2a_3p1: ldo2 {
|
|
regulator-name = "vreg_l2a_3p1";
|
|
regulator-min-microvolt = <3072000>;
|
|
regulator-max-microvolt = <3072000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3a_0p9: ldo3 {
|
|
regulator-name = "vreg_l3a_0p9";
|
|
regulator-min-microvolt = <928000>;
|
|
regulator-max-microvolt = <932000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L4 - lmx.lvl (ARC) */
|
|
|
|
vreg_l5a_0p88: ldo5 {
|
|
regulator-name = "vreg_l5a_0p88";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6a_1p2: ldo6 {
|
|
regulator-name = "vreg_l6a_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L7 is unused. */
|
|
|
|
vreg_l9a_1p2: ldo9 {
|
|
regulator-name = "vreg_l9a_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L10 is unused, L11 - lcx.lvl (ARC) */
|
|
|
|
vreg_l12a_1p8: ldo12 {
|
|
regulator-name = "vreg_l12a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L13 is unused. */
|
|
|
|
vreg_l14a_1p8: ldo14 {
|
|
regulator-name = "vreg_l14a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1880000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L15 & L16 are unused. */
|
|
|
|
vreg_l17a_3p0: ldo17 {
|
|
regulator-name = "vreg_l17a_3p0";
|
|
regulator-min-microvolt = <2496000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l18a_0p9: ldo18 {
|
|
regulator-name = "vreg_l18a_0p9";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Remaining regulators that are not yet supported:
|
|
* OLEDB: 4925000-8100000
|
|
* ab: 4600000-6100000
|
|
* ibb: 800000-5400000
|
|
*/
|
|
regulators-1 {
|
|
compatible = "qcom,pm8150l-rpmh-regulators";
|
|
qcom,pmic-id = "c";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
vdd-s7-supply = <&vph_pwr>;
|
|
vdd-s8-supply = <&vph_pwr>;
|
|
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
|
|
vdd-l2-l3-supply = <&vreg_s8c_1p2>;
|
|
vdd-l4-l5-l6-supply = <&vreg_bob>;
|
|
vdd-l7-l11-supply = <&vreg_bob>;
|
|
vdd-l9-l10-supply = <&vreg_bob>;
|
|
vdd-bob-supply = <&vph_pwr>;
|
|
|
|
vreg_bob: bob {
|
|
regulator-name = "vreg_bob";
|
|
regulator-min-microvolt = <3350000>;
|
|
regulator-max-microvolt = <3960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
/*
|
|
* S1-S6 are ARCs:
|
|
* (S1+S2) - gfx.lvl,
|
|
* S3 - mx.lvl,
|
|
* (S4+S5) - mmcx.lvl,
|
|
* S6 - ebi.lvl
|
|
*/
|
|
|
|
vreg_s7c_0p35: smps7 {
|
|
regulator-name = "vreg_s7c_0p35";
|
|
regulator-min-microvolt = <348000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s8c_1p2: smps8 {
|
|
regulator-name = "vreg_s8c_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1c_1p8: ldo1 {
|
|
regulator-name = "vreg_l1c_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L2-4 are unused. */
|
|
|
|
vreg_l5c_1p8: ldo5 {
|
|
regulator-name = "vreg_l5c_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6c_2p9: ldo6 {
|
|
regulator-name = "vreg_l6c_2p9";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7c_2p85: ldo7 {
|
|
regulator-name = "vreg_l7c_2p85";
|
|
regulator-min-microvolt = <2856000>;
|
|
regulator-max-microvolt = <3104000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l8c_1p8: ldo8 {
|
|
regulator-name = "vreg_l8c_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9c_2p9: ldo9 {
|
|
regulator-name = "vreg_l9c_2p9";
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l10c_3p3: ldo10 {
|
|
regulator-name = "vreg_l10c_3p3";
|
|
regulator-min-microvolt = <3296000>;
|
|
regulator-max-microvolt = <3296000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l11c_3p0: ldo11 {
|
|
regulator-name = "vreg_l11c_3p0";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-2 {
|
|
compatible = "qcom,pm8009-rpmh-regulators";
|
|
qcom,pmic-id = "f";
|
|
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vreg_bob>;
|
|
vdd-l2-supply = <&vreg_s8c_1p2>;
|
|
vdd-l5-l6-supply = <&vreg_bob>;
|
|
vdd-l7-supply = <&vreg_s4a_1p8>;
|
|
|
|
vreg_s1f_1p2: smps1 {
|
|
regulator-name = "vreg_s1f_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s2f_0p5: smps2 {
|
|
regulator-name = "vreg_s2f_0p5";
|
|
regulator-min-microvolt = <512000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L1 is unused. */
|
|
|
|
vreg_l2f_1p3: ldo2 {
|
|
regulator-name = "vreg_l2f_1p3";
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/* L3 & L4 are unused. */
|
|
|
|
vreg_l5f_2p8: ldo5 {
|
|
regulator-name = "vreg_l5f_2p85";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6f_2p8: ldo6 {
|
|
regulator-name = "vreg_l6f_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7f_1p8: ldo7 {
|
|
regulator-name = "vreg_l7f_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cdsp {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
nfc@28 {
|
|
compatible = "nxp,nxp-nci-i2c";
|
|
reg = <0x28>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <111 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
|
|
firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
clock-frequency = <1000000>;
|
|
|
|
cs35l41_l: speaker-amp@40 {
|
|
compatible = "cirrus,cs35l41";
|
|
reg = <0x40>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
|
|
cirrus,boost-peak-milliamp = <4000>;
|
|
cirrus,boost-ind-nanohenry = <1000>;
|
|
cirrus,boost-cap-microfarad = <15>;
|
|
cirrus,asp-sdout-hiz = <3>;
|
|
cirrus,gpio2-src-select = <2>;
|
|
cirrus,gpio2-output-enable;
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
|
|
cs35l41_r: speaker-amp@41 {
|
|
compatible = "cirrus,cs35l41";
|
|
reg = <0x41>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
|
|
cirrus,boost-peak-milliamp = <4000>;
|
|
cirrus,boost-ind-nanohenry = <1000>;
|
|
cirrus,boost-cap-microfarad = <15>;
|
|
cirrus,asp-sdout-hiz = <3>;
|
|
cirrus,gpio2-src-select = <2>;
|
|
cirrus,gpio2-output-enable;
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
/* Dialog SLG51000 CMIC @ 75 */
|
|
};
|
|
|
|
&i2c9 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
/* AMS TCS3490 RGB+IR color sensor @ 72 */
|
|
};
|
|
|
|
&i2c13 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
touchscreen@48 {
|
|
compatible = "samsung,s6sy761";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <39 0x2008>;
|
|
/* It's "vddio" downstream but it works anyway! */
|
|
vdd-supply = <&vreg_l1c_1p8>;
|
|
avdd-supply = <&vreg_l10c_3p3>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ts_int_default>;
|
|
};
|
|
};
|
|
|
|
&i2c15 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
/* Qcom SMB1390 @ 10 */
|
|
/* Qcom SMB1390_slave @ 18 */
|
|
/* HALO HL6111R Qi charger @ 25 */
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l5a_0p88>;
|
|
vdda-pll-supply = <&vreg_l9a_1p2>;
|
|
};
|
|
|
|
&pcie2 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
|
|
};
|
|
|
|
&pcie2_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l5a_0p88>;
|
|
vdda-pll-supply = <&vreg_l9a_1p2>;
|
|
};
|
|
|
|
&pon_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&pon_resin {
|
|
status = "okay";
|
|
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "okay";
|
|
|
|
cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
|
|
pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
|
|
vmmc-supply = <&vreg_l9c_2p9>;
|
|
vqmmc-supply = <&vreg_l6c_2p9>;
|
|
bus-width = <4>;
|
|
no-sdio;
|
|
no-mmc;
|
|
};
|
|
|
|
&slpi {
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <40 4>, <52 4>;
|
|
|
|
sdc2_default_state: sdc2-default-state {
|
|
clk-pins {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc2_cmd";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc2_data";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mdm2ap_default: mdm2ap-default-state {
|
|
pins = "gpio1", "gpio3";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
ts_int_default: ts-int-default-state {
|
|
pins = "gpio39";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
ap2mdm_default: ap2mdm-default-state {
|
|
pins = "gpio56", "gpio57";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
sdc2_card_det_n: sd-card-det-n-state {
|
|
pins = "gpio77";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
&uart12 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
|
|
&ufs_mem_hc { status = "disabled"; };
|
|
&ufs_mem_phy { status = "disabled"; };
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
status = "okay";
|
|
|
|
vdda-pll-supply = <&vreg_l5a_0p88>;
|
|
vdda18-supply = <&vreg_l12a_1p8>;
|
|
vdda33-supply = <&vreg_l2a_3p1>;
|
|
};
|
|
|
|
&usb_1_qmpphy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l9a_1p2>;
|
|
vdda-pll-supply = <&vreg_l18a_0p9>;
|
|
};
|