243 lines
6.7 KiB
C
243 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#define DRIVER_NAME "asm9260-timer"
|
|
|
|
/*
|
|
* this device provide 4 offsets for each register:
|
|
* 0x0 - plain read write mode
|
|
* 0x4 - set mode, OR logic.
|
|
* 0x8 - clr mode, XOR logic.
|
|
* 0xc - togle mode.
|
|
*/
|
|
#define SET_REG 4
|
|
#define CLR_REG 8
|
|
|
|
#define HW_IR 0x0000 /* RW. Interrupt */
|
|
#define BM_IR_CR0 BIT(4)
|
|
#define BM_IR_MR3 BIT(3)
|
|
#define BM_IR_MR2 BIT(2)
|
|
#define BM_IR_MR1 BIT(1)
|
|
#define BM_IR_MR0 BIT(0)
|
|
|
|
#define HW_TCR 0x0010 /* RW. Timer controller */
|
|
/* BM_C*_RST
|
|
* Timer Counter and the Prescale Counter are synchronously reset on the
|
|
* next positive edge of PCLK. The counters remain reset until TCR[1] is
|
|
* returned to zero. */
|
|
#define BM_C3_RST BIT(7)
|
|
#define BM_C2_RST BIT(6)
|
|
#define BM_C1_RST BIT(5)
|
|
#define BM_C0_RST BIT(4)
|
|
/* BM_C*_EN
|
|
* 1 - Timer Counter and Prescale Counter are enabled for counting
|
|
* 0 - counters are disabled */
|
|
#define BM_C3_EN BIT(3)
|
|
#define BM_C2_EN BIT(2)
|
|
#define BM_C1_EN BIT(1)
|
|
#define BM_C0_EN BIT(0)
|
|
|
|
#define HW_DIR 0x0020 /* RW. Direction? */
|
|
/* 00 - count up
|
|
* 01 - count down
|
|
* 10 - ?? 2^n/2 */
|
|
#define BM_DIR_COUNT_UP 0
|
|
#define BM_DIR_COUNT_DOWN 1
|
|
#define BM_DIR0_SHIFT 0
|
|
#define BM_DIR1_SHIFT 4
|
|
#define BM_DIR2_SHIFT 8
|
|
#define BM_DIR3_SHIFT 12
|
|
#define BM_DIR_DEFAULT (BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
|
|
BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
|
|
BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
|
|
BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
|
|
|
|
#define HW_TC0 0x0030 /* RO. Timer counter 0 */
|
|
/* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
|
|
* interrupt. This registers can be used to detect overflow */
|
|
#define HW_TC1 0x0040
|
|
#define HW_TC2 0x0050
|
|
#define HW_TC3 0x0060
|
|
|
|
#define HW_PR 0x0070 /* RW. prescaler */
|
|
#define BM_PR_DISABLE 0
|
|
#define HW_PC 0x0080 /* RO. Prescaler counter */
|
|
#define HW_MCR 0x0090 /* RW. Match control */
|
|
/* enable interrupt on match */
|
|
#define BM_MCR_INT_EN(n) (1 << (n * 3 + 0))
|
|
/* enable TC reset on match */
|
|
#define BM_MCR_RES_EN(n) (1 << (n * 3 + 1))
|
|
/* enable stop TC on match */
|
|
#define BM_MCR_STOP_EN(n) (1 << (n * 3 + 2))
|
|
|
|
#define HW_MR0 0x00a0 /* RW. Match reg */
|
|
#define HW_MR1 0x00b0
|
|
#define HW_MR2 0x00C0
|
|
#define HW_MR3 0x00D0
|
|
|
|
#define HW_CTCR 0x0180 /* Counter control */
|
|
#define BM_CTCR0_SHIFT 0
|
|
#define BM_CTCR1_SHIFT 2
|
|
#define BM_CTCR2_SHIFT 4
|
|
#define BM_CTCR3_SHIFT 6
|
|
#define BM_CTCR_TM 0 /* Timer mode. Every rising PCLK edge. */
|
|
#define BM_CTCR_DEFAULT (BM_CTCR_TM << BM_CTCR0_SHIFT | \
|
|
BM_CTCR_TM << BM_CTCR1_SHIFT | \
|
|
BM_CTCR_TM << BM_CTCR2_SHIFT | \
|
|
BM_CTCR_TM << BM_CTCR3_SHIFT)
|
|
|
|
static struct asm9260_timer_priv {
|
|
void __iomem *base;
|
|
unsigned long ticks_per_jiffy;
|
|
} priv;
|
|
|
|
static int asm9260_timer_set_next_event(unsigned long delta,
|
|
struct clock_event_device *evt)
|
|
{
|
|
/* configure match count for TC0 */
|
|
writel_relaxed(delta, priv.base + HW_MR0);
|
|
/* enable TC0 */
|
|
writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
|
|
return 0;
|
|
}
|
|
|
|
static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
|
|
{
|
|
/* stop timer0 */
|
|
writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
|
|
}
|
|
|
|
static int asm9260_timer_shutdown(struct clock_event_device *evt)
|
|
{
|
|
__asm9260_timer_shutdown(evt);
|
|
return 0;
|
|
}
|
|
|
|
static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
|
|
{
|
|
__asm9260_timer_shutdown(evt);
|
|
|
|
/* enable reset and stop on match */
|
|
writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
|
|
priv.base + HW_MCR + SET_REG);
|
|
return 0;
|
|
}
|
|
|
|
static int asm9260_timer_set_periodic(struct clock_event_device *evt)
|
|
{
|
|
__asm9260_timer_shutdown(evt);
|
|
|
|
/* disable reset and stop on match */
|
|
writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
|
|
priv.base + HW_MCR + CLR_REG);
|
|
/* configure match count for TC0 */
|
|
writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
|
|
/* enable TC0 */
|
|
writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
|
|
return 0;
|
|
}
|
|
|
|
static struct clock_event_device event_dev = {
|
|
.name = DRIVER_NAME,
|
|
.rating = 200,
|
|
.features = CLOCK_EVT_FEAT_PERIODIC |
|
|
CLOCK_EVT_FEAT_ONESHOT,
|
|
.set_next_event = asm9260_timer_set_next_event,
|
|
.set_state_shutdown = asm9260_timer_shutdown,
|
|
.set_state_periodic = asm9260_timer_set_periodic,
|
|
.set_state_oneshot = asm9260_timer_set_oneshot,
|
|
.tick_resume = asm9260_timer_shutdown,
|
|
};
|
|
|
|
static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
evt->event_handler(evt);
|
|
|
|
writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* ---------------------------------------------------------------------------
|
|
* Timer initialization
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
static int __init asm9260_timer_init(struct device_node *np)
|
|
{
|
|
int irq;
|
|
struct clk *clk;
|
|
int ret;
|
|
unsigned long rate;
|
|
|
|
priv.base = of_io_request_and_map(np, 0, np->name);
|
|
if (IS_ERR(priv.base)) {
|
|
pr_err("%pOFn: unable to map resource\n", np);
|
|
return PTR_ERR(priv.base);
|
|
}
|
|
|
|
clk = of_clk_get(np, 0);
|
|
if (IS_ERR(clk)) {
|
|
pr_err("Failed to get clk!\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
pr_err("Failed to enable clk!\n");
|
|
return ret;
|
|
}
|
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
|
|
DRIVER_NAME, &event_dev);
|
|
if (ret) {
|
|
pr_err("Failed to setup irq!\n");
|
|
return ret;
|
|
}
|
|
|
|
/* set all timers for count-up */
|
|
writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
|
|
/* disable divider */
|
|
writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
|
|
/* make sure all timers use every rising PCLK edge. */
|
|
writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
|
|
/* enable interrupt for TC0 and clean setting for all other lines */
|
|
writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
|
|
|
|
rate = clk_get_rate(clk);
|
|
clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
|
|
200, 32, clocksource_mmio_readl_up);
|
|
|
|
/* Seems like we can't use counter without match register even if
|
|
* actions for MR are disabled. So, set MR to max value. */
|
|
writel_relaxed(0xffffffff, priv.base + HW_MR1);
|
|
/* enable TC1 */
|
|
writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
|
|
|
|
priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
|
|
event_dev.cpumask = cpumask_of(0);
|
|
clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
|
|
|
|
return 0;
|
|
}
|
|
TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
|
|
asm9260_timer_init);
|