linux-zen-server/drivers/clocksource/mips-gic-timer.c

270 lines
6.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
#define pr_fmt(fmt) "mips-gic-timer: " fmt
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/cpu.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/of_irq.h>
#include <linux/percpu.h>
#include <linux/sched_clock.h>
#include <linux/smp.h>
#include <linux/time.h>
#include <asm/mips-cps.h>
static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
static int gic_timer_irq;
static unsigned int gic_frequency;
static bool __read_mostly gic_clock_unstable;
static void gic_clocksource_unstable(char *reason);
static u64 notrace gic_read_count_2x32(void)
{
unsigned int hi, hi2, lo;
do {
hi = read_gic_counter_32h();
lo = read_gic_counter_32l();
hi2 = read_gic_counter_32h();
} while (hi2 != hi);
return (((u64) hi) << 32) + lo;
}
static u64 notrace gic_read_count_64(void)
{
return read_gic_counter();
}
static u64 notrace gic_read_count(void)
{
if (mips_cm_is64)
return gic_read_count_64();
return gic_read_count_2x32();
}
static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
{
int cpu = cpumask_first(evt->cpumask);
u64 cnt;
int res;
cnt = gic_read_count();
cnt += (u64)delta;
if (cpu == raw_smp_processor_id()) {
write_gic_vl_compare(cnt);
} else {
write_gic_vl_other(mips_cm_vp_id(cpu));
write_gic_vo_compare(cnt);
}
res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
return res;
}
static irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
{
struct clock_event_device *cd = dev_id;
write_gic_vl_compare(read_gic_vl_compare());
cd->event_handler(cd);
return IRQ_HANDLED;
}
static struct irqaction gic_compare_irqaction = {
.handler = gic_compare_interrupt,
.percpu_dev_id = &gic_clockevent_device,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "timer",
};
static void gic_clockevent_cpu_init(unsigned int cpu,
struct clock_event_device *cd)
{
cd->name = "MIPS GIC";
cd->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_C3STOP;
cd->rating = 350;
cd->irq = gic_timer_irq;
cd->cpumask = cpumask_of(cpu);
cd->set_next_event = gic_next_event;
clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff);
enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE);
}
static void gic_clockevent_cpu_exit(struct clock_event_device *cd)
{
disable_percpu_irq(gic_timer_irq);
}
static void gic_update_frequency(void *data)
{
unsigned long rate = (unsigned long)data;
clockevents_update_freq(this_cpu_ptr(&gic_clockevent_device), rate);
}
static int gic_starting_cpu(unsigned int cpu)
{
gic_clockevent_cpu_init(cpu, this_cpu_ptr(&gic_clockevent_device));
return 0;
}
static int gic_clk_notifier(struct notifier_block *nb, unsigned long action,
void *data)
{
struct clk_notifier_data *cnd = data;
if (action == POST_RATE_CHANGE) {
gic_clocksource_unstable("ref clock rate change");
on_each_cpu(gic_update_frequency, (void *)cnd->new_rate, 1);
}
return NOTIFY_OK;
}
static int gic_dying_cpu(unsigned int cpu)
{
gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device));
return 0;
}
static struct notifier_block gic_clk_nb = {
.notifier_call = gic_clk_notifier,
};
static int gic_clockevent_init(void)
{
int ret;
if (!gic_frequency)
return -ENXIO;
ret = setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
if (ret < 0) {
pr_err("IRQ %d setup failed (%d)\n", gic_timer_irq, ret);
return ret;
}
cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING,
"clockevents/mips/gic/timer:starting",
gic_starting_cpu, gic_dying_cpu);
return 0;
}
static u64 gic_hpt_read(struct clocksource *cs)
{
return gic_read_count();
}
static struct clocksource gic_clocksource = {
.name = "GIC",
.read = gic_hpt_read,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.vdso_clock_mode = VDSO_CLOCKMODE_GIC,
};
static void gic_clocksource_unstable(char *reason)
{
if (gic_clock_unstable)
return;
gic_clock_unstable = true;
pr_info("GIC timer is unstable due to %s\n", reason);
clocksource_mark_unstable(&gic_clocksource);
}
static int __init __gic_clocksource_init(void)
{
unsigned int count_width;
int ret;
/* Set clocksource mask. */
count_width = read_gic_config() & GIC_CONFIG_COUNTBITS;
count_width >>= __ffs(GIC_CONFIG_COUNTBITS);
count_width *= 4;
count_width += 32;
gic_clocksource.mask = CLOCKSOURCE_MASK(count_width);
/* Calculate a somewhat reasonable rating value. */
gic_clocksource.rating = 200 + gic_frequency / 10000000;
ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
if (ret < 0)
pr_warn("Unable to register clocksource\n");
return ret;
}
static int __init gic_clocksource_of_init(struct device_node *node)
{
struct clk *clk;
int ret;
if (!mips_gic_present() || !node->parent ||
!of_device_is_compatible(node->parent, "mti,gic")) {
pr_warn("No DT definition\n");
return -ENXIO;
}
clk = of_clk_get(node, 0);
if (!IS_ERR(clk)) {
ret = clk_prepare_enable(clk);
if (ret < 0) {
pr_err("Failed to enable clock\n");
clk_put(clk);
return ret;
}
gic_frequency = clk_get_rate(clk);
} else if (of_property_read_u32(node, "clock-frequency",
&gic_frequency)) {
pr_err("Frequency not specified\n");
return -EINVAL;
}
gic_timer_irq = irq_of_parse_and_map(node, 0);
if (!gic_timer_irq) {
pr_err("IRQ not specified\n");
return -EINVAL;
}
ret = __gic_clocksource_init();
if (ret)
return ret;
ret = gic_clockevent_init();
if (!ret && !IS_ERR(clk)) {
if (clk_notifier_register(clk, &gic_clk_nb) < 0)
pr_warn("Unable to register clock notifier\n");
}
/* And finally start the counter */
clear_gic_config(GIC_CONFIG_COUNTSTOP);
/*
* It's safe to use the MIPS GIC timer as a sched clock source only if
* its ticks are stable, which is true on either the platforms with
* stable CPU frequency or on the platforms with CM3 and CPU frequency
* change performed by the CPC core clocks divider.
*/
if (mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ)) {
sched_clock_register(mips_cm_is64 ?
gic_read_count_64 : gic_read_count_2x32,
64, gic_frequency);
}
return 0;
}
TIMER_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
gic_clocksource_of_init);