linux-zen-server/drivers/cxl/cxlpci.h

96 lines
3.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
#ifndef __CXL_PCI_H__
#define __CXL_PCI_H__
#include <linux/pci.h>
#include "cxl.h"
#define CXL_MEMORY_PROGIF 0x10
/*
* See section 8.1 Configuration Space Registers in the CXL 2.0
* Specification. Names are taken straight from the specification with "CXL" and
* "DVSEC" redundancies removed. When obvious, abbreviations may be used.
*/
#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
#define PCI_DVSEC_VENDOR_ID_CXL 0x1E98
/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
#define CXL_DVSEC_PCIE_DEVICE 0
#define CXL_DVSEC_CAP_OFFSET 0xA
#define CXL_DVSEC_MEM_CAPABLE BIT(2)
#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
#define CXL_DVSEC_CTRL_OFFSET 0xC
#define CXL_DVSEC_MEM_ENABLE BIT(2)
#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
#define CXL_DVSEC_MEM_ACTIVE BIT(1)
#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
#define CXL_DVSEC_RANGE_MAX 2
/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
#define CXL_DVSEC_FUNCTION_MAP 2
/* CXL 2.0 8.1.5: CXL 2.0 Extensions DVSEC for Ports */
#define CXL_DVSEC_PORT_EXTENSIONS 3
/* CXL 2.0 8.1.6: GPF DVSEC for CXL Port */
#define CXL_DVSEC_PORT_GPF 4
/* CXL 2.0 8.1.7: GPF DVSEC for CXL Device */
#define CXL_DVSEC_DEVICE_GPF 5
/* CXL 2.0 8.1.8: PCIe DVSEC for Flex Bus Port */
#define CXL_DVSEC_PCIE_FLEXBUS_PORT 7
/* CXL 2.0 8.1.9: Register Locator DVSEC */
#define CXL_DVSEC_REG_LOCATOR 8
#define CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET 0xC
#define CXL_DVSEC_REG_LOCATOR_BIR_MASK GENMASK(2, 0)
#define CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
#define CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
/*
* NOTE: Currently all the functions which are enabled for CXL require their
* vectors to be in the first 16. Use this as the default max.
*/
#define CXL_PCI_DEFAULT_MAX_VECTORS 16
/* Register Block Identifier (RBI) */
enum cxl_regloc_type {
CXL_REGLOC_RBI_EMPTY = 0,
CXL_REGLOC_RBI_COMPONENT,
CXL_REGLOC_RBI_VIRT,
CXL_REGLOC_RBI_MEMDEV,
CXL_REGLOC_RBI_TYPES
};
struct cdat_header {
__le32 length;
u8 revision;
u8 checksum;
u8 reserved[6];
__le32 sequence;
} __packed;
struct cdat_entry_header {
u8 type;
u8 reserved;
__le16 length;
} __packed;
int devm_cxl_port_enumerate_dports(struct cxl_port *port);
struct cxl_dev_state;
int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm,
struct cxl_endpoint_dvsec_info *info);
void read_cdat_data(struct cxl_port *port);
void cxl_cor_error_detected(struct pci_dev *pdev);
pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
pci_channel_state_t state);
#endif /* __CXL_PCI_H__ */