484 lines
12 KiB
C
484 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* NXP i.MX93 ADC driver
|
|
*
|
|
* Copyright 2023 NXP
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/err.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define IMX93_ADC_DRIVER_NAME "imx93-adc"
|
|
|
|
/* Register map definition */
|
|
#define IMX93_ADC_MCR 0x00
|
|
#define IMX93_ADC_MSR 0x04
|
|
#define IMX93_ADC_ISR 0x10
|
|
#define IMX93_ADC_IMR 0x20
|
|
#define IMX93_ADC_CIMR0 0x24
|
|
#define IMX93_ADC_CTR0 0x94
|
|
#define IMX93_ADC_NCMR0 0xA4
|
|
#define IMX93_ADC_PCDR0 0x100
|
|
#define IMX93_ADC_PCDR1 0x104
|
|
#define IMX93_ADC_PCDR2 0x108
|
|
#define IMX93_ADC_PCDR3 0x10c
|
|
#define IMX93_ADC_PCDR4 0x110
|
|
#define IMX93_ADC_PCDR5 0x114
|
|
#define IMX93_ADC_PCDR6 0x118
|
|
#define IMX93_ADC_PCDR7 0x11c
|
|
#define IMX93_ADC_CALSTAT 0x39C
|
|
|
|
/* ADC bit shift */
|
|
#define IMX93_ADC_MCR_MODE_MASK BIT(29)
|
|
#define IMX93_ADC_MCR_NSTART_MASK BIT(24)
|
|
#define IMX93_ADC_MCR_CALSTART_MASK BIT(14)
|
|
#define IMX93_ADC_MCR_ADCLKSE_MASK BIT(8)
|
|
#define IMX93_ADC_MCR_PWDN_MASK BIT(0)
|
|
#define IMX93_ADC_MSR_CALFAIL_MASK BIT(30)
|
|
#define IMX93_ADC_MSR_CALBUSY_MASK BIT(29)
|
|
#define IMX93_ADC_MSR_ADCSTATUS_MASK GENMASK(2, 0)
|
|
#define IMX93_ADC_ISR_ECH_MASK BIT(0)
|
|
#define IMX93_ADC_ISR_EOC_MASK BIT(1)
|
|
#define IMX93_ADC_ISR_EOC_ECH_MASK (IMX93_ADC_ISR_EOC_MASK | \
|
|
IMX93_ADC_ISR_ECH_MASK)
|
|
#define IMX93_ADC_IMR_JEOC_MASK BIT(3)
|
|
#define IMX93_ADC_IMR_JECH_MASK BIT(2)
|
|
#define IMX93_ADC_IMR_EOC_MASK BIT(1)
|
|
#define IMX93_ADC_IMR_ECH_MASK BIT(0)
|
|
#define IMX93_ADC_PCDR_CDATA_MASK GENMASK(11, 0)
|
|
|
|
/* ADC status */
|
|
#define IMX93_ADC_MSR_ADCSTATUS_IDLE 0
|
|
#define IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN 1
|
|
#define IMX93_ADC_MSR_ADCSTATUS_WAIT_STATE 2
|
|
#define IMX93_ADC_MSR_ADCSTATUS_BUSY_IN_CALIBRATION 3
|
|
#define IMX93_ADC_MSR_ADCSTATUS_SAMPLE 4
|
|
#define IMX93_ADC_MSR_ADCSTATUS_CONVERSION 6
|
|
|
|
#define IMX93_ADC_TIMEOUT msecs_to_jiffies(100)
|
|
|
|
struct imx93_adc {
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct clk *ipg_clk;
|
|
int irq;
|
|
struct regulator *vref;
|
|
/* lock to protect against multiple access to the device */
|
|
struct mutex lock;
|
|
struct completion completion;
|
|
};
|
|
|
|
#define IMX93_ADC_CHAN(_idx) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = (_idx), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
}
|
|
|
|
static const struct iio_chan_spec imx93_adc_iio_channels[] = {
|
|
IMX93_ADC_CHAN(0),
|
|
IMX93_ADC_CHAN(1),
|
|
IMX93_ADC_CHAN(2),
|
|
IMX93_ADC_CHAN(3),
|
|
};
|
|
|
|
static void imx93_adc_power_down(struct imx93_adc *adc)
|
|
{
|
|
u32 mcr, msr;
|
|
int ret;
|
|
|
|
mcr = readl(adc->regs + IMX93_ADC_MCR);
|
|
mcr |= FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
|
|
writel(mcr, adc->regs + IMX93_ADC_MCR);
|
|
|
|
ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
|
|
((msr & IMX93_ADC_MSR_ADCSTATUS_MASK) ==
|
|
IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN),
|
|
1, 50);
|
|
if (ret == -ETIMEDOUT)
|
|
dev_warn(adc->dev,
|
|
"ADC do not in power down mode, current MSR is %x\n",
|
|
msr);
|
|
}
|
|
|
|
static void imx93_adc_power_up(struct imx93_adc *adc)
|
|
{
|
|
u32 mcr;
|
|
|
|
/* bring ADC out of power down state, in idle state */
|
|
mcr = readl(adc->regs + IMX93_ADC_MCR);
|
|
mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
|
|
writel(mcr, adc->regs + IMX93_ADC_MCR);
|
|
}
|
|
|
|
static void imx93_adc_config_ad_clk(struct imx93_adc *adc)
|
|
{
|
|
u32 mcr;
|
|
|
|
/* put adc in power down mode */
|
|
imx93_adc_power_down(adc);
|
|
|
|
/* config the AD_CLK equal to bus clock */
|
|
mcr = readl(adc->regs + IMX93_ADC_MCR);
|
|
mcr |= FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
|
|
writel(mcr, adc->regs + IMX93_ADC_MCR);
|
|
|
|
imx93_adc_power_up(adc);
|
|
}
|
|
|
|
static int imx93_adc_calibration(struct imx93_adc *adc)
|
|
{
|
|
u32 mcr, msr;
|
|
int ret;
|
|
|
|
/* make sure ADC in power down mode */
|
|
imx93_adc_power_down(adc);
|
|
|
|
/* config SAR controller operating clock */
|
|
mcr = readl(adc->regs + IMX93_ADC_MCR);
|
|
mcr &= ~FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
|
|
writel(mcr, adc->regs + IMX93_ADC_MCR);
|
|
|
|
imx93_adc_power_up(adc);
|
|
|
|
/*
|
|
* TODO: we use the default TSAMP/NRSMPL/AVGEN in MCR,
|
|
* can add the setting of these bit if need in future.
|
|
*/
|
|
|
|
/* run calibration */
|
|
mcr = readl(adc->regs + IMX93_ADC_MCR);
|
|
mcr |= FIELD_PREP(IMX93_ADC_MCR_CALSTART_MASK, 1);
|
|
writel(mcr, adc->regs + IMX93_ADC_MCR);
|
|
|
|
/* wait calibration to be finished */
|
|
ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
|
|
!(msr & IMX93_ADC_MSR_CALBUSY_MASK), 1000, 2000000);
|
|
if (ret == -ETIMEDOUT) {
|
|
dev_warn(adc->dev, "ADC do not finish calibration in 2 min!\n");
|
|
imx93_adc_power_down(adc);
|
|
return ret;
|
|
}
|
|
|
|
/* check whether calbration is success or not */
|
|
msr = readl(adc->regs + IMX93_ADC_MSR);
|
|
if (msr & IMX93_ADC_MSR_CALFAIL_MASK) {
|
|
dev_warn(adc->dev, "ADC calibration failed!\n");
|
|
imx93_adc_power_down(adc);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx93_adc_read_channel_conversion(struct imx93_adc *adc,
|
|
int channel_number,
|
|
int *result)
|
|
{
|
|
u32 channel;
|
|
u32 imr, mcr, pcda;
|
|
long ret;
|
|
|
|
reinit_completion(&adc->completion);
|
|
|
|
/* config channel mask register */
|
|
channel = 1 << channel_number;
|
|
writel(channel, adc->regs + IMX93_ADC_NCMR0);
|
|
|
|
/* TODO: can config desired sample time in CTRn if need */
|
|
|
|
/* config interrupt mask */
|
|
imr = FIELD_PREP(IMX93_ADC_IMR_EOC_MASK, 1);
|
|
writel(imr, adc->regs + IMX93_ADC_IMR);
|
|
writel(channel, adc->regs + IMX93_ADC_CIMR0);
|
|
|
|
/* config one-shot mode */
|
|
mcr = readl(adc->regs + IMX93_ADC_MCR);
|
|
mcr &= ~FIELD_PREP(IMX93_ADC_MCR_MODE_MASK, 1);
|
|
writel(mcr, adc->regs + IMX93_ADC_MCR);
|
|
|
|
/* start normal conversion */
|
|
mcr = readl(adc->regs + IMX93_ADC_MCR);
|
|
mcr |= FIELD_PREP(IMX93_ADC_MCR_NSTART_MASK, 1);
|
|
writel(mcr, adc->regs + IMX93_ADC_MCR);
|
|
|
|
ret = wait_for_completion_interruptible_timeout(&adc->completion,
|
|
IMX93_ADC_TIMEOUT);
|
|
if (ret == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pcda = readl(adc->regs + IMX93_ADC_PCDR0 + channel_number * 4);
|
|
|
|
*result = FIELD_GET(IMX93_ADC_PCDR_CDATA_MASK, pcda);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx93_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct imx93_adc *adc = iio_priv(indio_dev);
|
|
struct device *dev = adc->dev;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
pm_runtime_get_sync(dev);
|
|
mutex_lock(&adc->lock);
|
|
ret = imx93_adc_read_channel_conversion(adc, chan->channel, val);
|
|
mutex_unlock(&adc->lock);
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_sync_autosuspend(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = regulator_get_voltage(adc->vref);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret / 1000;
|
|
*val2 = 12;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = clk_get_rate(adc->ipg_clk);
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t imx93_adc_isr(int irq, void *dev_id)
|
|
{
|
|
struct imx93_adc *adc = dev_id;
|
|
u32 isr, eoc, unexpected;
|
|
|
|
isr = readl(adc->regs + IMX93_ADC_ISR);
|
|
|
|
if (FIELD_GET(IMX93_ADC_ISR_EOC_ECH_MASK, isr)) {
|
|
eoc = isr & IMX93_ADC_ISR_EOC_ECH_MASK;
|
|
writel(eoc, adc->regs + IMX93_ADC_ISR);
|
|
complete(&adc->completion);
|
|
}
|
|
|
|
unexpected = isr & ~IMX93_ADC_ISR_EOC_ECH_MASK;
|
|
if (unexpected) {
|
|
writel(unexpected, adc->regs + IMX93_ADC_ISR);
|
|
dev_err(adc->dev, "Unexpected interrupt 0x%08x.\n", unexpected);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct iio_info imx93_adc_iio_info = {
|
|
.read_raw = &imx93_adc_read_raw,
|
|
};
|
|
|
|
static int imx93_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct imx93_adc *adc;
|
|
struct iio_dev *indio_dev;
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
|
|
if (!indio_dev)
|
|
return dev_err_probe(dev, -ENOMEM,
|
|
"Failed allocating iio device\n");
|
|
|
|
adc = iio_priv(indio_dev);
|
|
adc->dev = dev;
|
|
|
|
mutex_init(&adc->lock);
|
|
adc->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(adc->regs))
|
|
return dev_err_probe(dev, PTR_ERR(adc->regs),
|
|
"Failed getting ioremap resource\n");
|
|
|
|
/* The third irq is for ADC conversion usage */
|
|
adc->irq = platform_get_irq(pdev, 2);
|
|
if (adc->irq < 0)
|
|
return adc->irq;
|
|
|
|
adc->ipg_clk = devm_clk_get(dev, "ipg");
|
|
if (IS_ERR(adc->ipg_clk))
|
|
return dev_err_probe(dev, PTR_ERR(adc->ipg_clk),
|
|
"Failed getting clock.\n");
|
|
|
|
adc->vref = devm_regulator_get(dev, "vref");
|
|
if (IS_ERR(adc->vref))
|
|
return dev_err_probe(dev, PTR_ERR(adc->vref),
|
|
"Failed getting reference voltage.\n");
|
|
|
|
ret = regulator_enable(adc->vref);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret,
|
|
"Failed to enable reference voltage.\n");
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
init_completion(&adc->completion);
|
|
|
|
indio_dev->name = "imx93-adc";
|
|
indio_dev->info = &imx93_adc_iio_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = imx93_adc_iio_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(imx93_adc_iio_channels);
|
|
|
|
ret = clk_prepare_enable(adc->ipg_clk);
|
|
if (ret) {
|
|
dev_err_probe(dev, ret,
|
|
"Failed to enable ipg clock.\n");
|
|
goto error_regulator_disable;
|
|
}
|
|
|
|
ret = request_irq(adc->irq, imx93_adc_isr, 0, IMX93_ADC_DRIVER_NAME, adc);
|
|
if (ret < 0) {
|
|
dev_err_probe(dev, ret,
|
|
"Failed requesting irq, irq = %d\n", adc->irq);
|
|
goto error_ipg_clk_disable;
|
|
}
|
|
|
|
ret = imx93_adc_calibration(adc);
|
|
if (ret < 0)
|
|
goto error_free_adc_irq;
|
|
|
|
imx93_adc_config_ad_clk(adc);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err_probe(dev, ret,
|
|
"Failed to register this iio device.\n");
|
|
goto error_adc_power_down;
|
|
}
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_set_autosuspend_delay(dev, 50);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
return 0;
|
|
|
|
error_adc_power_down:
|
|
imx93_adc_power_down(adc);
|
|
error_free_adc_irq:
|
|
free_irq(adc->irq, adc);
|
|
error_ipg_clk_disable:
|
|
clk_disable_unprepare(adc->ipg_clk);
|
|
error_regulator_disable:
|
|
regulator_disable(adc->vref);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx93_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct imx93_adc *adc = iio_priv(indio_dev);
|
|
struct device *dev = adc->dev;
|
|
|
|
/* adc power down need clock on */
|
|
pm_runtime_get_sync(dev);
|
|
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_dont_use_autosuspend(dev);
|
|
pm_runtime_put_noidle(dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
imx93_adc_power_down(adc);
|
|
free_irq(adc->irq, adc);
|
|
clk_disable_unprepare(adc->ipg_clk);
|
|
regulator_disable(adc->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx93_adc_runtime_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct imx93_adc *adc = iio_priv(indio_dev);
|
|
|
|
imx93_adc_power_down(adc);
|
|
clk_disable_unprepare(adc->ipg_clk);
|
|
regulator_disable(adc->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx93_adc_runtime_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct imx93_adc *adc = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = regulator_enable(adc->vref);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Can't enable adc reference top voltage, err = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(adc->ipg_clk);
|
|
if (ret) {
|
|
dev_err(dev, "Could not prepare or enable clock.\n");
|
|
goto err_disable_reg;
|
|
}
|
|
|
|
imx93_adc_power_up(adc);
|
|
|
|
return 0;
|
|
|
|
err_disable_reg:
|
|
regulator_disable(adc->vref);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DEFINE_RUNTIME_DEV_PM_OPS(imx93_adc_pm_ops,
|
|
imx93_adc_runtime_suspend,
|
|
imx93_adc_runtime_resume, NULL);
|
|
|
|
static const struct of_device_id imx93_adc_match[] = {
|
|
{ .compatible = "nxp,imx93-adc", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx93_adc_match);
|
|
|
|
static struct platform_driver imx93_adc_driver = {
|
|
.probe = imx93_adc_probe,
|
|
.remove = imx93_adc_remove,
|
|
.driver = {
|
|
.name = IMX93_ADC_DRIVER_NAME,
|
|
.of_match_table = imx93_adc_match,
|
|
.pm = pm_ptr(&imx93_adc_pm_ops),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(imx93_adc_driver);
|
|
|
|
MODULE_DESCRIPTION("NXP i.MX93 ADC driver");
|
|
MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>");
|
|
MODULE_LICENSE("GPL");
|