245 lines
6.6 KiB
C
245 lines
6.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2001 Arndt Schoenewald
|
|
* Copyright (c) 2000-2001 Vojtech Pavlik
|
|
* Copyright (c) 2000 Mark Fletcher
|
|
*
|
|
* Sponsored by Quelltext AG (http://www.quelltext-ag.de), Dortmund, Germany
|
|
*/
|
|
|
|
/*
|
|
* Driver to use Handykey's Twiddler (the first edition, i.e. the one with
|
|
* the RS232 interface) as a joystick under Linux
|
|
*
|
|
* The Twiddler is a one-handed chording keyboard featuring twelve buttons on
|
|
* the front, six buttons on the top, and a built-in tilt sensor. The buttons
|
|
* on the front, which are grouped as four rows of three buttons, are pressed
|
|
* by the four fingers (this implies only one button per row can be held down
|
|
* at the same time) and the buttons on the top are for the thumb. The tilt
|
|
* sensor delivers X and Y axis data depending on how the Twiddler is held.
|
|
* Additional information can be found at http://www.handykey.com.
|
|
*
|
|
* This driver does not use the Twiddler for its intended purpose, i.e. as
|
|
* a chording keyboard, but as a joystick: pressing and releasing a button
|
|
* immediately sends a corresponding button event, and tilting it generates
|
|
* corresponding ABS_X and ABS_Y events. This turns the Twiddler into a game
|
|
* controller with amazing 18 buttons :-)
|
|
*
|
|
* Note: The Twiddler2 (the successor of the Twiddler that connects directly
|
|
* to the PS/2 keyboard and mouse ports) is NOT supported by this driver!
|
|
*
|
|
* For questions or feedback regarding this driver module please contact:
|
|
* Arndt Schoenewald <arndt@quelltext.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/input.h>
|
|
#include <linux/serio.h>
|
|
|
|
#define DRIVER_DESC "Handykey Twiddler keyboard as a joystick driver"
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
* Constants.
|
|
*/
|
|
|
|
#define TWIDJOY_MAX_LENGTH 5
|
|
|
|
static struct twidjoy_button_spec {
|
|
int bitshift;
|
|
int bitmask;
|
|
int buttons[3];
|
|
}
|
|
twidjoy_buttons[] = {
|
|
{ 0, 3, { BTN_A, BTN_B, BTN_C } },
|
|
{ 2, 3, { BTN_X, BTN_Y, BTN_Z } },
|
|
{ 4, 3, { BTN_TL, BTN_TR, BTN_TR2 } },
|
|
{ 6, 3, { BTN_SELECT, BTN_START, BTN_MODE } },
|
|
{ 8, 1, { BTN_BASE5 } },
|
|
{ 9, 1, { BTN_BASE } },
|
|
{ 10, 1, { BTN_BASE3 } },
|
|
{ 11, 1, { BTN_BASE4 } },
|
|
{ 12, 1, { BTN_BASE2 } },
|
|
{ 13, 1, { BTN_BASE6 } },
|
|
{ 0, 0, { 0 } }
|
|
};
|
|
|
|
/*
|
|
* Per-Twiddler data.
|
|
*/
|
|
|
|
struct twidjoy {
|
|
struct input_dev *dev;
|
|
int idx;
|
|
unsigned char data[TWIDJOY_MAX_LENGTH];
|
|
char phys[32];
|
|
};
|
|
|
|
/*
|
|
* twidjoy_process_packet() decodes packets the driver receives from the
|
|
* Twiddler. It updates the data accordingly.
|
|
*/
|
|
|
|
static void twidjoy_process_packet(struct twidjoy *twidjoy)
|
|
{
|
|
struct input_dev *dev = twidjoy->dev;
|
|
unsigned char *data = twidjoy->data;
|
|
struct twidjoy_button_spec *bp;
|
|
int button_bits, abs_x, abs_y;
|
|
|
|
button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
|
|
|
|
for (bp = twidjoy_buttons; bp->bitmask; bp++) {
|
|
int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
|
|
int i;
|
|
|
|
for (i = 0; i < bp->bitmask; i++)
|
|
input_report_key(dev, bp->buttons[i], i+1 == value);
|
|
}
|
|
|
|
abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
|
|
if (data[4] & 0x08) abs_x -= 256;
|
|
|
|
abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
|
|
if (data[3] & 0x02) abs_y -= 256;
|
|
|
|
input_report_abs(dev, ABS_X, -abs_x);
|
|
input_report_abs(dev, ABS_Y, +abs_y);
|
|
|
|
input_sync(dev);
|
|
}
|
|
|
|
/*
|
|
* twidjoy_interrupt() is called by the low level driver when characters
|
|
* are ready for us. We then buffer them for further processing, or call the
|
|
* packet processing routine.
|
|
*/
|
|
|
|
static irqreturn_t twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
|
|
{
|
|
struct twidjoy *twidjoy = serio_get_drvdata(serio);
|
|
|
|
/* All Twiddler packets are 5 bytes. The fact that the first byte
|
|
* has a MSB of 0 and all other bytes have a MSB of 1 can be used
|
|
* to check and regain sync. */
|
|
|
|
if ((data & 0x80) == 0)
|
|
twidjoy->idx = 0; /* this byte starts a new packet */
|
|
else if (twidjoy->idx == 0)
|
|
return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
|
|
|
|
if (twidjoy->idx < TWIDJOY_MAX_LENGTH)
|
|
twidjoy->data[twidjoy->idx++] = data;
|
|
|
|
if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
|
|
twidjoy_process_packet(twidjoy);
|
|
twidjoy->idx = 0;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* twidjoy_disconnect() is the opposite of twidjoy_connect()
|
|
*/
|
|
|
|
static void twidjoy_disconnect(struct serio *serio)
|
|
{
|
|
struct twidjoy *twidjoy = serio_get_drvdata(serio);
|
|
|
|
serio_close(serio);
|
|
serio_set_drvdata(serio, NULL);
|
|
input_unregister_device(twidjoy->dev);
|
|
kfree(twidjoy);
|
|
}
|
|
|
|
/*
|
|
* twidjoy_connect() is the routine that is called when someone adds a
|
|
* new serio device. It looks for the Twiddler, and if found, registers
|
|
* it as an input device.
|
|
*/
|
|
|
|
static int twidjoy_connect(struct serio *serio, struct serio_driver *drv)
|
|
{
|
|
struct twidjoy_button_spec *bp;
|
|
struct twidjoy *twidjoy;
|
|
struct input_dev *input_dev;
|
|
int err = -ENOMEM;
|
|
int i;
|
|
|
|
twidjoy = kzalloc(sizeof(struct twidjoy), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!twidjoy || !input_dev)
|
|
goto fail1;
|
|
|
|
twidjoy->dev = input_dev;
|
|
snprintf(twidjoy->phys, sizeof(twidjoy->phys), "%s/input0", serio->phys);
|
|
|
|
input_dev->name = "Handykey Twiddler";
|
|
input_dev->phys = twidjoy->phys;
|
|
input_dev->id.bustype = BUS_RS232;
|
|
input_dev->id.vendor = SERIO_TWIDJOY;
|
|
input_dev->id.product = 0x0001;
|
|
input_dev->id.version = 0x0100;
|
|
input_dev->dev.parent = &serio->dev;
|
|
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
input_set_abs_params(input_dev, ABS_X, -50, 50, 4, 4);
|
|
input_set_abs_params(input_dev, ABS_Y, -50, 50, 4, 4);
|
|
|
|
for (bp = twidjoy_buttons; bp->bitmask; bp++)
|
|
for (i = 0; i < bp->bitmask; i++)
|
|
set_bit(bp->buttons[i], input_dev->keybit);
|
|
|
|
serio_set_drvdata(serio, twidjoy);
|
|
|
|
err = serio_open(serio, drv);
|
|
if (err)
|
|
goto fail2;
|
|
|
|
err = input_register_device(twidjoy->dev);
|
|
if (err)
|
|
goto fail3;
|
|
|
|
return 0;
|
|
|
|
fail3: serio_close(serio);
|
|
fail2: serio_set_drvdata(serio, NULL);
|
|
fail1: input_free_device(input_dev);
|
|
kfree(twidjoy);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* The serio driver structure.
|
|
*/
|
|
|
|
static const struct serio_device_id twidjoy_serio_ids[] = {
|
|
{
|
|
.type = SERIO_RS232,
|
|
.proto = SERIO_TWIDJOY,
|
|
.id = SERIO_ANY,
|
|
.extra = SERIO_ANY,
|
|
},
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(serio, twidjoy_serio_ids);
|
|
|
|
static struct serio_driver twidjoy_drv = {
|
|
.driver = {
|
|
.name = "twidjoy",
|
|
},
|
|
.description = DRIVER_DESC,
|
|
.id_table = twidjoy_serio_ids,
|
|
.interrupt = twidjoy_interrupt,
|
|
.connect = twidjoy_connect,
|
|
.disconnect = twidjoy_disconnect,
|
|
};
|
|
|
|
module_serio_driver(twidjoy_drv);
|