705 lines
19 KiB
C
705 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Maxim MAX77620 MFD Driver
|
|
*
|
|
* Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* Author:
|
|
* Laxman Dewangan <ldewangan@nvidia.com>
|
|
* Chaitanya Bandi <bandik@nvidia.com>
|
|
* Mallikarjun Kasoju <mkasoju@nvidia.com>
|
|
*/
|
|
|
|
/****************** Teminology used in driver ********************
|
|
* Here are some terminology used from datasheet for quick reference:
|
|
* Flexible Power Sequence (FPS):
|
|
* The Flexible Power Sequencer (FPS) allows each regulator to power up under
|
|
* hardware or software control. Additionally, each regulator can power on
|
|
* independently or among a group of other regulators with an adjustable
|
|
* power-up and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can
|
|
* be programmed to be part of a sequence allowing external regulators to be
|
|
* sequenced along with internal regulators. 32KHz clock can be programmed to
|
|
* be part of a sequence.
|
|
* There is 3 FPS confguration registers and all resources are configured to
|
|
* any of these FPS or no FPS.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/max77620.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
static struct max77620_chip *max77620_scratch;
|
|
|
|
static const struct resource gpio_resources[] = {
|
|
DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO),
|
|
};
|
|
|
|
static const struct resource power_resources[] = {
|
|
DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW),
|
|
};
|
|
|
|
static const struct resource rtc_resources[] = {
|
|
DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC),
|
|
};
|
|
|
|
static const struct resource thermal_resources[] = {
|
|
DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1),
|
|
DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2),
|
|
};
|
|
|
|
static const struct regmap_irq max77620_top_irqs[] = {
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL, 0, MAX77620_IRQ_TOP_GLBL_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD, 0, MAX77620_IRQ_TOP_SD_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO, 0, MAX77620_IRQ_TOP_LDO_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO, 0, MAX77620_IRQ_TOP_GPIO_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC, 0, MAX77620_IRQ_TOP_RTC_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K, 0, MAX77620_IRQ_TOP_32K_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF, 0, MAX77620_IRQ_TOP_ONOFF_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW, 1, MAX77620_IRQ_LBM_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1, 1, MAX77620_IRQ_TJALRM1_MASK),
|
|
REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2, 1, MAX77620_IRQ_TJALRM2_MASK),
|
|
};
|
|
|
|
static const struct mfd_cell max77620_children[] = {
|
|
{ .name = "max77620-pinctrl", },
|
|
{ .name = "max77620-clock", },
|
|
{ .name = "max77620-pmic", },
|
|
{ .name = "max77620-watchdog", },
|
|
{
|
|
.name = "max77620-gpio",
|
|
.resources = gpio_resources,
|
|
.num_resources = ARRAY_SIZE(gpio_resources),
|
|
}, {
|
|
.name = "max77620-rtc",
|
|
.resources = rtc_resources,
|
|
.num_resources = ARRAY_SIZE(rtc_resources),
|
|
}, {
|
|
.name = "max77620-power",
|
|
.resources = power_resources,
|
|
.num_resources = ARRAY_SIZE(power_resources),
|
|
}, {
|
|
.name = "max77620-thermal",
|
|
.resources = thermal_resources,
|
|
.num_resources = ARRAY_SIZE(thermal_resources),
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell max20024_children[] = {
|
|
{ .name = "max20024-pinctrl", },
|
|
{ .name = "max77620-clock", },
|
|
{ .name = "max20024-pmic", },
|
|
{ .name = "max77620-watchdog", },
|
|
{
|
|
.name = "max77620-gpio",
|
|
.resources = gpio_resources,
|
|
.num_resources = ARRAY_SIZE(gpio_resources),
|
|
}, {
|
|
.name = "max77620-rtc",
|
|
.resources = rtc_resources,
|
|
.num_resources = ARRAY_SIZE(rtc_resources),
|
|
}, {
|
|
.name = "max20024-power",
|
|
.resources = power_resources,
|
|
.num_resources = ARRAY_SIZE(power_resources),
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell max77663_children[] = {
|
|
{ .name = "max77620-pinctrl", },
|
|
{ .name = "max77620-clock", },
|
|
{ .name = "max77663-pmic", },
|
|
{ .name = "max77620-watchdog", },
|
|
{
|
|
.name = "max77620-gpio",
|
|
.resources = gpio_resources,
|
|
.num_resources = ARRAY_SIZE(gpio_resources),
|
|
}, {
|
|
.name = "max77620-rtc",
|
|
.resources = rtc_resources,
|
|
.num_resources = ARRAY_SIZE(rtc_resources),
|
|
}, {
|
|
.name = "max77663-power",
|
|
.resources = power_resources,
|
|
.num_resources = ARRAY_SIZE(power_resources),
|
|
},
|
|
};
|
|
|
|
static const struct regmap_range max77620_readable_ranges[] = {
|
|
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
|
|
};
|
|
|
|
static const struct regmap_access_table max77620_readable_table = {
|
|
.yes_ranges = max77620_readable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges),
|
|
};
|
|
|
|
static const struct regmap_range max20024_readable_ranges[] = {
|
|
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
|
|
regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD),
|
|
};
|
|
|
|
static const struct regmap_access_table max20024_readable_table = {
|
|
.yes_ranges = max20024_readable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges),
|
|
};
|
|
|
|
static const struct regmap_range max77620_writable_ranges[] = {
|
|
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
|
|
};
|
|
|
|
static const struct regmap_access_table max77620_writable_table = {
|
|
.yes_ranges = max77620_writable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges),
|
|
};
|
|
|
|
static const struct regmap_range max77620_cacheable_ranges[] = {
|
|
regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3),
|
|
regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3),
|
|
};
|
|
|
|
static const struct regmap_access_table max77620_volatile_table = {
|
|
.no_ranges = max77620_cacheable_ranges,
|
|
.n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges),
|
|
};
|
|
|
|
static const struct regmap_config max77620_regmap_config = {
|
|
.name = "power-slave",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = MAX77620_REG_DVSSD4 + 1,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.rd_table = &max77620_readable_table,
|
|
.wr_table = &max77620_writable_table,
|
|
.volatile_table = &max77620_volatile_table,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
static const struct regmap_config max20024_regmap_config = {
|
|
.name = "power-slave",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = MAX20024_REG_MAX_ADD + 1,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.rd_table = &max20024_readable_table,
|
|
.wr_table = &max77620_writable_table,
|
|
.volatile_table = &max77620_volatile_table,
|
|
};
|
|
|
|
static const struct regmap_range max77663_readable_ranges[] = {
|
|
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
|
|
};
|
|
|
|
static const struct regmap_access_table max77663_readable_table = {
|
|
.yes_ranges = max77663_readable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges),
|
|
};
|
|
|
|
static const struct regmap_range max77663_writable_ranges[] = {
|
|
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
|
|
};
|
|
|
|
static const struct regmap_access_table max77663_writable_table = {
|
|
.yes_ranges = max77663_writable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges),
|
|
};
|
|
|
|
static const struct regmap_config max77663_regmap_config = {
|
|
.name = "power-slave",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = MAX77620_REG_CID5 + 1,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.rd_table = &max77663_readable_table,
|
|
.wr_table = &max77663_writable_table,
|
|
.volatile_table = &max77620_volatile_table,
|
|
};
|
|
|
|
/*
|
|
* MAX77620 and MAX20024 has the following steps of the interrupt handling
|
|
* for TOP interrupts:
|
|
* 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM.
|
|
* 2. Read IRQTOP and service the interrupt.
|
|
* 3. Once all interrupts has been checked and serviced, the interrupt service
|
|
* routine un-masks the hardware interrupt line by clearing GLBLM.
|
|
*/
|
|
static int max77620_irq_global_mask(void *irq_drv_data)
|
|
{
|
|
struct max77620_chip *chip = irq_drv_data;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
|
|
MAX77620_GLBLM_MASK, MAX77620_GLBLM_MASK);
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "Failed to set GLBLM: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max77620_irq_global_unmask(void *irq_drv_data)
|
|
{
|
|
struct max77620_chip *chip = irq_drv_data;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
|
|
MAX77620_GLBLM_MASK, 0);
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "Failed to reset GLBLM: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct regmap_irq_chip max77620_top_irq_chip = {
|
|
.name = "max77620-top",
|
|
.irqs = max77620_top_irqs,
|
|
.num_irqs = ARRAY_SIZE(max77620_top_irqs),
|
|
.num_regs = 2,
|
|
.status_base = MAX77620_REG_IRQTOP,
|
|
.mask_base = MAX77620_REG_IRQTOPM,
|
|
.handle_pre_irq = max77620_irq_global_mask,
|
|
.handle_post_irq = max77620_irq_global_unmask,
|
|
};
|
|
|
|
/* max77620_get_fps_period_reg_value: Get FPS bit field value from
|
|
* requested periods.
|
|
* MAX77620 supports the FPS period of 40, 80, 160, 320, 540, 1280, 2560
|
|
* and 5120 microseconds. MAX20024 supports the FPS period of 20, 40, 80,
|
|
* 160, 320, 540, 1280 and 2560 microseconds.
|
|
* The FPS register has 3 bits field to set the FPS period as
|
|
* bits max77620 max20024
|
|
* 000 40 20
|
|
* 001 80 40
|
|
* :::
|
|
*/
|
|
static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
|
|
int tperiod)
|
|
{
|
|
int fps_min_period;
|
|
int i;
|
|
|
|
switch (chip->chip_id) {
|
|
case MAX20024:
|
|
fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
|
|
break;
|
|
case MAX77620:
|
|
fps_min_period = MAX77620_FPS_PERIOD_MIN_US;
|
|
break;
|
|
case MAX77663:
|
|
fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
if (fps_min_period >= tperiod)
|
|
return i;
|
|
fps_min_period *= 2;
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
/* max77620_config_fps: Configure FPS configuration registers
|
|
* based on platform specific information.
|
|
*/
|
|
static int max77620_config_fps(struct max77620_chip *chip,
|
|
struct device_node *fps_np)
|
|
{
|
|
struct device *dev = chip->dev;
|
|
unsigned int mask = 0, config = 0;
|
|
u32 fps_max_period;
|
|
u32 param_val;
|
|
int tperiod, fps_id;
|
|
int ret;
|
|
char fps_name[10];
|
|
|
|
switch (chip->chip_id) {
|
|
case MAX20024:
|
|
fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
|
|
break;
|
|
case MAX77620:
|
|
fps_max_period = MAX77620_FPS_PERIOD_MAX_US;
|
|
break;
|
|
case MAX77663:
|
|
fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
|
|
sprintf(fps_name, "fps%d", fps_id);
|
|
if (of_node_name_eq(fps_np, fps_name))
|
|
break;
|
|
}
|
|
|
|
if (fps_id == MAX77620_FPS_COUNT) {
|
|
dev_err(dev, "FPS node name %pOFn is not valid\n", fps_np);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32(fps_np, "maxim,shutdown-fps-time-period-us",
|
|
¶m_val);
|
|
if (!ret) {
|
|
mask |= MAX77620_FPS_TIME_PERIOD_MASK;
|
|
chip->shutdown_fps_period[fps_id] = min(param_val,
|
|
fps_max_period);
|
|
tperiod = max77620_get_fps_period_reg_value(chip,
|
|
chip->shutdown_fps_period[fps_id]);
|
|
config |= tperiod << MAX77620_FPS_TIME_PERIOD_SHIFT;
|
|
}
|
|
|
|
ret = of_property_read_u32(fps_np, "maxim,suspend-fps-time-period-us",
|
|
¶m_val);
|
|
if (!ret)
|
|
chip->suspend_fps_period[fps_id] = min(param_val,
|
|
fps_max_period);
|
|
|
|
ret = of_property_read_u32(fps_np, "maxim,fps-event-source",
|
|
¶m_val);
|
|
if (!ret) {
|
|
if (param_val > 2) {
|
|
dev_err(dev, "FPS%d event-source invalid\n", fps_id);
|
|
return -EINVAL;
|
|
}
|
|
mask |= MAX77620_FPS_EN_SRC_MASK;
|
|
config |= param_val << MAX77620_FPS_EN_SRC_SHIFT;
|
|
if (param_val == 2) {
|
|
mask |= MAX77620_FPS_ENFPS_SW_MASK;
|
|
config |= MAX77620_FPS_ENFPS_SW;
|
|
}
|
|
}
|
|
|
|
if (!chip->sleep_enable && !chip->enable_global_lpm) {
|
|
ret = of_property_read_u32(fps_np,
|
|
"maxim,device-state-on-disabled-event",
|
|
¶m_val);
|
|
if (!ret) {
|
|
if (param_val == 0)
|
|
chip->sleep_enable = true;
|
|
else if (param_val == 1)
|
|
chip->enable_global_lpm = true;
|
|
}
|
|
}
|
|
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
|
|
mask, config);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to update FPS CFG: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77620_initialise_fps(struct max77620_chip *chip)
|
|
{
|
|
struct device *dev = chip->dev;
|
|
struct device_node *fps_np, *fps_child;
|
|
u8 config;
|
|
int fps_id;
|
|
int ret;
|
|
|
|
for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
|
|
chip->shutdown_fps_period[fps_id] = -1;
|
|
chip->suspend_fps_period[fps_id] = -1;
|
|
}
|
|
|
|
fps_np = of_get_child_by_name(dev->of_node, "fps");
|
|
if (!fps_np)
|
|
goto skip_fps;
|
|
|
|
for_each_child_of_node(fps_np, fps_child) {
|
|
ret = max77620_config_fps(chip, fps_child);
|
|
if (ret < 0) {
|
|
of_node_put(fps_child);
|
|
of_node_put(fps_np);
|
|
return ret;
|
|
}
|
|
}
|
|
of_node_put(fps_np);
|
|
|
|
config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0;
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
|
|
MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to update SLP_LPM: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
skip_fps:
|
|
if (chip->chip_id == MAX77663)
|
|
return 0;
|
|
|
|
/* Enable wake on EN0 pin */
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
|
|
MAX77620_ONOFFCNFG2_WK_EN0,
|
|
MAX77620_ONOFFCNFG2_WK_EN0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to update WK_EN0: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */
|
|
if ((chip->chip_id == MAX20024) && chip->sleep_enable) {
|
|
config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE;
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
|
|
config, config);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to update SLPEN: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77620_read_es_version(struct max77620_chip *chip)
|
|
{
|
|
unsigned int val;
|
|
u8 cid_val[6];
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; i++) {
|
|
ret = regmap_read(chip->rmap, i, &val);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to read CID: %d\n", ret);
|
|
return ret;
|
|
}
|
|
dev_dbg(chip->dev, "CID%d: 0x%02x\n",
|
|
i - MAX77620_REG_CID0, val);
|
|
cid_val[i - MAX77620_REG_CID0] = val;
|
|
}
|
|
|
|
/* CID4 is OTP Version and CID5 is ES version */
|
|
dev_info(chip->dev, "PMIC Version OTP:0x%02X and ES:0x%X\n",
|
|
cid_val[4], MAX77620_CID5_DIDM(cid_val[5]));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void max77620_pm_power_off(void)
|
|
{
|
|
struct max77620_chip *chip = max77620_scratch;
|
|
|
|
regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
|
|
MAX77620_ONOFFCNFG1_SFT_RST,
|
|
MAX77620_ONOFFCNFG1_SFT_RST);
|
|
}
|
|
|
|
static int max77620_probe(struct i2c_client *client)
|
|
{
|
|
const struct i2c_device_id *id = i2c_client_get_device_id(client);
|
|
const struct regmap_config *rmap_config;
|
|
struct max77620_chip *chip;
|
|
const struct mfd_cell *mfd_cells;
|
|
int n_mfd_cells;
|
|
bool pm_off;
|
|
int ret;
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, chip);
|
|
chip->dev = &client->dev;
|
|
chip->chip_irq = client->irq;
|
|
chip->chip_id = (enum max77620_chip_id)id->driver_data;
|
|
|
|
switch (chip->chip_id) {
|
|
case MAX77620:
|
|
mfd_cells = max77620_children;
|
|
n_mfd_cells = ARRAY_SIZE(max77620_children);
|
|
rmap_config = &max77620_regmap_config;
|
|
break;
|
|
case MAX20024:
|
|
mfd_cells = max20024_children;
|
|
n_mfd_cells = ARRAY_SIZE(max20024_children);
|
|
rmap_config = &max20024_regmap_config;
|
|
break;
|
|
case MAX77663:
|
|
mfd_cells = max77663_children;
|
|
n_mfd_cells = ARRAY_SIZE(max77663_children);
|
|
rmap_config = &max77663_regmap_config;
|
|
break;
|
|
default:
|
|
dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
chip->rmap = devm_regmap_init_i2c(client, rmap_config);
|
|
if (IS_ERR(chip->rmap)) {
|
|
ret = PTR_ERR(chip->rmap);
|
|
dev_err(chip->dev, "Failed to initialise regmap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = max77620_read_es_version(chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
max77620_top_irq_chip.irq_drv_data = chip;
|
|
ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED, 0,
|
|
&max77620_top_irq_chip,
|
|
&chip->top_irq_data);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = max77620_initialise_fps(chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
|
|
mfd_cells, n_mfd_cells, NULL, 0,
|
|
regmap_irq_get_domain(chip->top_irq_data));
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to add MFD children: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pm_off = of_device_is_system_power_controller(client->dev.of_node);
|
|
if (pm_off && !pm_power_off) {
|
|
max77620_scratch = chip;
|
|
pm_power_off = max77620_pm_power_off;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77620_set_fps_period(struct max77620_chip *chip,
|
|
int fps_id, int time_period)
|
|
{
|
|
int period = max77620_get_fps_period_reg_value(chip, time_period);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
|
|
MAX77620_FPS_TIME_PERIOD_MASK,
|
|
period << MAX77620_FPS_TIME_PERIOD_SHIFT);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to update FPS period: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77620_i2c_suspend(struct device *dev)
|
|
{
|
|
struct max77620_chip *chip = dev_get_drvdata(dev);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
unsigned int config;
|
|
int fps;
|
|
int ret;
|
|
|
|
for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
|
|
if (chip->suspend_fps_period[fps] < 0)
|
|
continue;
|
|
|
|
ret = max77620_set_fps_period(chip, fps,
|
|
chip->suspend_fps_period[fps]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* For MAX20024: No need to configure SLPEN on suspend as
|
|
* it will be configured on Init.
|
|
*/
|
|
if (chip->chip_id == MAX20024)
|
|
goto out;
|
|
|
|
config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0;
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
|
|
MAX77620_ONOFFCNFG1_SLPEN,
|
|
config);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to configure sleep in suspend: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (chip->chip_id == MAX77663)
|
|
goto out;
|
|
|
|
/* Disable WK_EN0 */
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
|
|
MAX77620_ONOFFCNFG2_WK_EN0, 0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to configure WK_EN in suspend: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
out:
|
|
disable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77620_i2c_resume(struct device *dev)
|
|
{
|
|
struct max77620_chip *chip = dev_get_drvdata(dev);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int ret;
|
|
int fps;
|
|
|
|
for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
|
|
if (chip->shutdown_fps_period[fps] < 0)
|
|
continue;
|
|
|
|
ret = max77620_set_fps_period(chip, fps,
|
|
chip->shutdown_fps_period[fps]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* For MAX20024: No need to configure WKEN0 on resume as
|
|
* it is configured on Init.
|
|
*/
|
|
if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663)
|
|
goto out;
|
|
|
|
/* Enable WK_EN0 */
|
|
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
|
|
MAX77620_ONOFFCNFG2_WK_EN0,
|
|
MAX77620_ONOFFCNFG2_WK_EN0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to configure WK_EN0 n resume: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
out:
|
|
enable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id max77620_id[] = {
|
|
{"max77620", MAX77620},
|
|
{"max20024", MAX20024},
|
|
{"max77663", MAX77663},
|
|
{},
|
|
};
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(max77620_pm_ops,
|
|
max77620_i2c_suspend, max77620_i2c_resume);
|
|
|
|
static struct i2c_driver max77620_driver = {
|
|
.driver = {
|
|
.name = "max77620",
|
|
.pm = pm_sleep_ptr(&max77620_pm_ops),
|
|
},
|
|
.probe_new = max77620_probe,
|
|
.id_table = max77620_id,
|
|
};
|
|
builtin_i2c_driver(max77620_driver);
|