292 lines
6.9 KiB
C
292 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MFD core driver for Ricoh RN5T618 PMIC
|
|
*
|
|
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
|
* Copyright (C) 2016 Toradex AG
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/rn5t618.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
|
|
static const struct mfd_cell rn5t618_cells[] = {
|
|
{ .name = "rn5t618-regulator" },
|
|
{ .name = "rn5t618-wdt" },
|
|
};
|
|
|
|
static const struct mfd_cell rc5t619_cells[] = {
|
|
{ .name = "rn5t618-adc" },
|
|
{ .name = "rn5t618-power" },
|
|
{ .name = "rn5t618-regulator" },
|
|
{ .name = "rc5t619-rtc" },
|
|
{ .name = "rn5t618-wdt" },
|
|
};
|
|
|
|
static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case RN5T618_WATCHDOGCNT:
|
|
case RN5T618_DCIRQ:
|
|
case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL:
|
|
case RN5T618_ADCCNT3:
|
|
case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3:
|
|
case RN5T618_IR_GPR:
|
|
case RN5T618_IR_GPF:
|
|
case RN5T618_MON_IOIN:
|
|
case RN5T618_INTMON:
|
|
case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
|
|
case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
|
|
case RN5T618_CHGCTL1:
|
|
case RN5T618_REGISET1 ... RN5T618_REGISET2:
|
|
case RN5T618_CHGSTATE:
|
|
case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI:
|
|
case RN5T618_GCHGDET:
|
|
case RN5T618_CONTROL ... RN5T618_CC_AVEREG0:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config rn5t618_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.volatile_reg = rn5t618_volatile_reg,
|
|
.max_register = RN5T618_MAX_REG,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static const struct regmap_irq rc5t619_irqs[] = {
|
|
REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
|
|
REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
|
|
REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
|
|
REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
|
|
REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
|
|
REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
|
|
};
|
|
|
|
static const struct regmap_irq_chip rc5t619_irq_chip = {
|
|
.name = "rc5t619",
|
|
.irqs = rc5t619_irqs,
|
|
.num_irqs = ARRAY_SIZE(rc5t619_irqs),
|
|
.num_regs = 1,
|
|
.status_base = RN5T618_INTMON,
|
|
.unmask_base = RN5T618_INTEN,
|
|
};
|
|
|
|
static struct i2c_client *rn5t618_pm_power_off;
|
|
static struct notifier_block rn5t618_restart_handler;
|
|
|
|
static int rn5t618_irq_init(struct rn5t618 *rn5t618)
|
|
{
|
|
const struct regmap_irq_chip *irq_chip = NULL;
|
|
int ret;
|
|
|
|
if (!rn5t618->irq)
|
|
return 0;
|
|
|
|
switch (rn5t618->variant) {
|
|
case RC5T619:
|
|
irq_chip = &rc5t619_irq_chip;
|
|
break;
|
|
default:
|
|
dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
|
|
(int)rn5t618->variant);
|
|
return -ENOENT;
|
|
}
|
|
|
|
ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
|
|
rn5t618->irq,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
0, irq_chip, &rn5t618->irq_data);
|
|
if (ret)
|
|
dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rn5t618_trigger_poweroff_sequence(bool repower)
|
|
{
|
|
int ret;
|
|
|
|
/* disable automatic repower-on */
|
|
ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret &= ~RN5T618_REPCNT_REPWRON;
|
|
if (repower)
|
|
ret |= RN5T618_REPCNT_REPWRON;
|
|
|
|
ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
|
|
RN5T618_REPCNT, (u8)ret);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* start power-off sequence */
|
|
ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret |= RN5T618_SLPCNT_SWPWROFF;
|
|
|
|
ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
|
|
RN5T618_SLPCNT, (u8)ret);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return;
|
|
|
|
err:
|
|
dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret);
|
|
}
|
|
|
|
static void rn5t618_power_off(void)
|
|
{
|
|
rn5t618_trigger_poweroff_sequence(false);
|
|
}
|
|
|
|
static int rn5t618_restart(struct notifier_block *this,
|
|
unsigned long mode, void *cmd)
|
|
{
|
|
rn5t618_trigger_poweroff_sequence(true);
|
|
|
|
/*
|
|
* Re-power factor detection on PMIC side is not instant. 1ms
|
|
* proved to be enough time until reset takes effect.
|
|
*/
|
|
mdelay(1);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static const struct of_device_id rn5t618_of_match[] = {
|
|
{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
|
|
{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
|
|
{ .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
|
|
|
|
static int rn5t618_i2c_probe(struct i2c_client *i2c)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
struct rn5t618 *priv;
|
|
int ret;
|
|
|
|
of_id = of_match_device(rn5t618_of_match, &i2c->dev);
|
|
if (!of_id) {
|
|
dev_err(&i2c->dev, "Failed to find matching DT ID\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, priv);
|
|
priv->variant = (long)of_id->data;
|
|
priv->irq = i2c->irq;
|
|
priv->dev = &i2c->dev;
|
|
|
|
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
|
|
if (IS_ERR(priv->regmap)) {
|
|
ret = PTR_ERR(priv->regmap);
|
|
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (priv->variant == RC5T619)
|
|
ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
|
|
rc5t619_cells,
|
|
ARRAY_SIZE(rc5t619_cells),
|
|
NULL, 0, NULL);
|
|
else
|
|
ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
|
|
rn5t618_cells,
|
|
ARRAY_SIZE(rn5t618_cells),
|
|
NULL, 0, NULL);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rn5t618_pm_power_off = i2c;
|
|
if (of_device_is_system_power_controller(i2c->dev.of_node)) {
|
|
if (!pm_power_off)
|
|
pm_power_off = rn5t618_power_off;
|
|
else
|
|
dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
|
|
}
|
|
|
|
rn5t618_restart_handler.notifier_call = rn5t618_restart;
|
|
rn5t618_restart_handler.priority = 192;
|
|
|
|
ret = register_restart_handler(&rn5t618_restart_handler);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return rn5t618_irq_init(priv);
|
|
}
|
|
|
|
static void rn5t618_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
if (i2c == rn5t618_pm_power_off) {
|
|
rn5t618_pm_power_off = NULL;
|
|
pm_power_off = NULL;
|
|
}
|
|
|
|
unregister_restart_handler(&rn5t618_restart_handler);
|
|
}
|
|
|
|
static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
|
|
{
|
|
struct rn5t618 *priv = dev_get_drvdata(dev);
|
|
|
|
if (priv->irq)
|
|
disable_irq(priv->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
|
|
{
|
|
struct rn5t618 *priv = dev_get_drvdata(dev);
|
|
|
|
if (priv->irq)
|
|
enable_irq(priv->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
|
|
rn5t618_i2c_suspend,
|
|
rn5t618_i2c_resume);
|
|
|
|
static struct i2c_driver rn5t618_i2c_driver = {
|
|
.driver = {
|
|
.name = "rn5t618",
|
|
.of_match_table = of_match_ptr(rn5t618_of_match),
|
|
.pm = &rn5t618_i2c_dev_pm_ops,
|
|
},
|
|
.probe_new = rn5t618_i2c_probe,
|
|
.remove = rn5t618_i2c_remove,
|
|
};
|
|
|
|
module_i2c_driver(rn5t618_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
|
|
MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
|
|
MODULE_LICENSE("GPL v2");
|