962 lines
23 KiB
C
962 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM
|
|
* and audio CODEC devices
|
|
*
|
|
* Copyright (C) 2005-2006 Texas Instruments, Inc.
|
|
*
|
|
* Modifications to defer interrupt handling to a kernel thread:
|
|
* Copyright (C) 2006 MontaVista Software, Inc.
|
|
*
|
|
* Based on tlv320aic23.c:
|
|
* Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
|
|
*
|
|
* Code cleanup and modifications to IRQ handler.
|
|
* by syed khasim <x0khasim@ti.com>
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/mfd/twl.h>
|
|
|
|
/* Register descriptions for audio */
|
|
#include <linux/mfd/twl4030-audio.h>
|
|
|
|
#include "twl-core.h"
|
|
|
|
/*
|
|
* The TWL4030 "Triton 2" is one of a family of a multi-function "Power
|
|
* Management and System Companion Device" chips originally designed for
|
|
* use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C,
|
|
* often at around 3 Mbit/sec, including for interrupt handling.
|
|
*
|
|
* This driver core provides genirq support for the interrupts emitted,
|
|
* by the various modules, and exports register access primitives.
|
|
*
|
|
* FIXME this driver currently requires use of the first interrupt line
|
|
* (and associated registers).
|
|
*/
|
|
|
|
#define DRIVER_NAME "twl"
|
|
|
|
/* Triton Core internal information (BEGIN) */
|
|
|
|
/* Base Address defns for twl4030_map[] */
|
|
|
|
/* subchip/slave 0 - USB ID */
|
|
#define TWL4030_BASEADD_USB 0x0000
|
|
|
|
/* subchip/slave 1 - AUD ID */
|
|
#define TWL4030_BASEADD_AUDIO_VOICE 0x0000
|
|
#define TWL4030_BASEADD_GPIO 0x0098
|
|
#define TWL4030_BASEADD_INTBR 0x0085
|
|
#define TWL4030_BASEADD_PIH 0x0080
|
|
#define TWL4030_BASEADD_TEST 0x004C
|
|
|
|
/* subchip/slave 2 - AUX ID */
|
|
#define TWL4030_BASEADD_INTERRUPTS 0x00B9
|
|
#define TWL4030_BASEADD_LED 0x00EE
|
|
#define TWL4030_BASEADD_MADC 0x0000
|
|
#define TWL4030_BASEADD_MAIN_CHARGE 0x0074
|
|
#define TWL4030_BASEADD_PRECHARGE 0x00AA
|
|
#define TWL4030_BASEADD_PWM 0x00F8
|
|
#define TWL4030_BASEADD_KEYPAD 0x00D2
|
|
|
|
#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */
|
|
#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's
|
|
one */
|
|
|
|
/* subchip/slave 3 - POWER ID */
|
|
#define TWL4030_BASEADD_BACKUP 0x0014
|
|
#define TWL4030_BASEADD_INT 0x002E
|
|
#define TWL4030_BASEADD_PM_MASTER 0x0036
|
|
|
|
#define TWL4030_BASEADD_PM_RECEIVER 0x005B
|
|
#define TWL4030_DCDC_GLOBAL_CFG 0x06
|
|
#define SMARTREFLEX_ENABLE BIT(3)
|
|
|
|
#define TWL4030_BASEADD_RTC 0x001C
|
|
#define TWL4030_BASEADD_SECURED_REG 0x0000
|
|
|
|
/* Triton Core internal information (END) */
|
|
|
|
|
|
/* subchip/slave 0 0x48 - POWER */
|
|
#define TWL6030_BASEADD_RTC 0x0000
|
|
#define TWL6030_BASEADD_SECURED_REG 0x0017
|
|
#define TWL6030_BASEADD_PM_MASTER 0x001F
|
|
#define TWL6030_BASEADD_PM_SLAVE_MISC 0x0030 /* PM_RECEIVER */
|
|
#define TWL6030_BASEADD_PM_MISC 0x00E2
|
|
#define TWL6030_BASEADD_PM_PUPD 0x00F0
|
|
|
|
/* subchip/slave 1 0x49 - FEATURE */
|
|
#define TWL6030_BASEADD_USB 0x0000
|
|
#define TWL6030_BASEADD_GPADC_CTRL 0x002E
|
|
#define TWL6030_BASEADD_AUX 0x0090
|
|
#define TWL6030_BASEADD_PWM 0x00BA
|
|
#define TWL6030_BASEADD_GASGAUGE 0x00C0
|
|
#define TWL6030_BASEADD_PIH 0x00D0
|
|
#define TWL6032_BASEADD_CHARGER 0x00DA
|
|
#define TWL6030_BASEADD_CHARGER 0x00E0
|
|
#define TWL6030_BASEADD_LED 0x00F4
|
|
|
|
/* subchip/slave 2 0x4A - DFT */
|
|
#define TWL6030_BASEADD_DIEID 0x00C0
|
|
|
|
/* subchip/slave 3 0x4B - AUDIO */
|
|
#define TWL6030_BASEADD_AUDIO 0x0000
|
|
#define TWL6030_BASEADD_RSV 0x0000
|
|
#define TWL6030_BASEADD_ZERO 0x0000
|
|
|
|
/* Few power values */
|
|
#define R_CFG_BOOT 0x05
|
|
|
|
/* some fields in R_CFG_BOOT */
|
|
#define HFCLK_FREQ_19p2_MHZ (1 << 0)
|
|
#define HFCLK_FREQ_26_MHZ (2 << 0)
|
|
#define HFCLK_FREQ_38p4_MHZ (3 << 0)
|
|
#define HIGH_PERF_SQ (1 << 3)
|
|
#define CK32K_LOWPWR_EN (1 << 7)
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/* Structure for each TWL4030/TWL6030 Slave */
|
|
struct twl_client {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
/* mapping the module id to slave id and base address */
|
|
struct twl_mapping {
|
|
unsigned char sid; /* Slave ID */
|
|
unsigned char base; /* base address */
|
|
};
|
|
|
|
struct twl_private {
|
|
bool ready; /* The core driver is ready to be used */
|
|
u32 twl_idcode; /* TWL IDCODE Register value */
|
|
unsigned int twl_id;
|
|
|
|
struct twl_mapping *twl_map;
|
|
struct twl_client *twl_modules;
|
|
};
|
|
|
|
static struct twl_private *twl_priv;
|
|
|
|
static struct twl_mapping twl4030_map[] = {
|
|
/*
|
|
* NOTE: don't change this table without updating the
|
|
* <linux/mfd/twl.h> defines for TWL4030_MODULE_*
|
|
* so they continue to match the order in this table.
|
|
*/
|
|
|
|
/* Common IPs */
|
|
{ 0, TWL4030_BASEADD_USB },
|
|
{ 1, TWL4030_BASEADD_PIH },
|
|
{ 2, TWL4030_BASEADD_MAIN_CHARGE },
|
|
{ 3, TWL4030_BASEADD_PM_MASTER },
|
|
{ 3, TWL4030_BASEADD_PM_RECEIVER },
|
|
|
|
{ 3, TWL4030_BASEADD_RTC },
|
|
{ 2, TWL4030_BASEADD_PWM },
|
|
{ 2, TWL4030_BASEADD_LED },
|
|
{ 3, TWL4030_BASEADD_SECURED_REG },
|
|
|
|
/* TWL4030 specific IPs */
|
|
{ 1, TWL4030_BASEADD_AUDIO_VOICE },
|
|
{ 1, TWL4030_BASEADD_GPIO },
|
|
{ 1, TWL4030_BASEADD_INTBR },
|
|
{ 1, TWL4030_BASEADD_TEST },
|
|
{ 2, TWL4030_BASEADD_KEYPAD },
|
|
|
|
{ 2, TWL4030_BASEADD_MADC },
|
|
{ 2, TWL4030_BASEADD_INTERRUPTS },
|
|
{ 2, TWL4030_BASEADD_PRECHARGE },
|
|
{ 3, TWL4030_BASEADD_BACKUP },
|
|
{ 3, TWL4030_BASEADD_INT },
|
|
|
|
{ 2, TWL5031_BASEADD_ACCESSORY },
|
|
{ 2, TWL5031_BASEADD_INTERRUPTS },
|
|
};
|
|
|
|
static const struct reg_default twl4030_49_defaults[] = {
|
|
/* Audio Registers */
|
|
{ 0x01, 0x00}, /* CODEC_MODE */
|
|
{ 0x02, 0x00}, /* OPTION */
|
|
/* 0x03 Unused */
|
|
{ 0x04, 0x00}, /* MICBIAS_CTL */
|
|
{ 0x05, 0x00}, /* ANAMICL */
|
|
{ 0x06, 0x00}, /* ANAMICR */
|
|
{ 0x07, 0x00}, /* AVADC_CTL */
|
|
{ 0x08, 0x00}, /* ADCMICSEL */
|
|
{ 0x09, 0x00}, /* DIGMIXING */
|
|
{ 0x0a, 0x0f}, /* ATXL1PGA */
|
|
{ 0x0b, 0x0f}, /* ATXR1PGA */
|
|
{ 0x0c, 0x0f}, /* AVTXL2PGA */
|
|
{ 0x0d, 0x0f}, /* AVTXR2PGA */
|
|
{ 0x0e, 0x00}, /* AUDIO_IF */
|
|
{ 0x0f, 0x00}, /* VOICE_IF */
|
|
{ 0x10, 0x3f}, /* ARXR1PGA */
|
|
{ 0x11, 0x3f}, /* ARXL1PGA */
|
|
{ 0x12, 0x3f}, /* ARXR2PGA */
|
|
{ 0x13, 0x3f}, /* ARXL2PGA */
|
|
{ 0x14, 0x25}, /* VRXPGA */
|
|
{ 0x15, 0x00}, /* VSTPGA */
|
|
{ 0x16, 0x00}, /* VRX2ARXPGA */
|
|
{ 0x17, 0x00}, /* AVDAC_CTL */
|
|
{ 0x18, 0x00}, /* ARX2VTXPGA */
|
|
{ 0x19, 0x32}, /* ARXL1_APGA_CTL*/
|
|
{ 0x1a, 0x32}, /* ARXR1_APGA_CTL*/
|
|
{ 0x1b, 0x32}, /* ARXL2_APGA_CTL*/
|
|
{ 0x1c, 0x32}, /* ARXR2_APGA_CTL*/
|
|
{ 0x1d, 0x00}, /* ATX2ARXPGA */
|
|
{ 0x1e, 0x00}, /* BT_IF */
|
|
{ 0x1f, 0x55}, /* BTPGA */
|
|
{ 0x20, 0x00}, /* BTSTPGA */
|
|
{ 0x21, 0x00}, /* EAR_CTL */
|
|
{ 0x22, 0x00}, /* HS_SEL */
|
|
{ 0x23, 0x00}, /* HS_GAIN_SET */
|
|
{ 0x24, 0x00}, /* HS_POPN_SET */
|
|
{ 0x25, 0x00}, /* PREDL_CTL */
|
|
{ 0x26, 0x00}, /* PREDR_CTL */
|
|
{ 0x27, 0x00}, /* PRECKL_CTL */
|
|
{ 0x28, 0x00}, /* PRECKR_CTL */
|
|
{ 0x29, 0x00}, /* HFL_CTL */
|
|
{ 0x2a, 0x00}, /* HFR_CTL */
|
|
{ 0x2b, 0x05}, /* ALC_CTL */
|
|
{ 0x2c, 0x00}, /* ALC_SET1 */
|
|
{ 0x2d, 0x00}, /* ALC_SET2 */
|
|
{ 0x2e, 0x00}, /* BOOST_CTL */
|
|
{ 0x2f, 0x00}, /* SOFTVOL_CTL */
|
|
{ 0x30, 0x13}, /* DTMF_FREQSEL */
|
|
{ 0x31, 0x00}, /* DTMF_TONEXT1H */
|
|
{ 0x32, 0x00}, /* DTMF_TONEXT1L */
|
|
{ 0x33, 0x00}, /* DTMF_TONEXT2H */
|
|
{ 0x34, 0x00}, /* DTMF_TONEXT2L */
|
|
{ 0x35, 0x79}, /* DTMF_TONOFF */
|
|
{ 0x36, 0x11}, /* DTMF_WANONOFF */
|
|
{ 0x37, 0x00}, /* I2S_RX_SCRAMBLE_H */
|
|
{ 0x38, 0x00}, /* I2S_RX_SCRAMBLE_M */
|
|
{ 0x39, 0x00}, /* I2S_RX_SCRAMBLE_L */
|
|
{ 0x3a, 0x06}, /* APLL_CTL */
|
|
{ 0x3b, 0x00}, /* DTMF_CTL */
|
|
{ 0x3c, 0x44}, /* DTMF_PGA_CTL2 (0x3C) */
|
|
{ 0x3d, 0x69}, /* DTMF_PGA_CTL1 (0x3D) */
|
|
{ 0x3e, 0x00}, /* MISC_SET_1 */
|
|
{ 0x3f, 0x00}, /* PCMBTMUX */
|
|
/* 0x40 - 0x42 Unused */
|
|
{ 0x43, 0x00}, /* RX_PATH_SEL */
|
|
{ 0x44, 0x32}, /* VDL_APGA_CTL */
|
|
{ 0x45, 0x00}, /* VIBRA_CTL */
|
|
{ 0x46, 0x00}, /* VIBRA_SET */
|
|
{ 0x47, 0x00}, /* VIBRA_PWM_SET */
|
|
{ 0x48, 0x00}, /* ANAMIC_GAIN */
|
|
{ 0x49, 0x00}, /* MISC_SET_2 */
|
|
/* End of Audio Registers */
|
|
};
|
|
|
|
static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0x00:
|
|
case 0x03:
|
|
case 0x40:
|
|
case 0x41:
|
|
case 0x42:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_range twl4030_49_volatile_ranges[] = {
|
|
regmap_reg_range(TWL4030_BASEADD_TEST, 0xff),
|
|
};
|
|
|
|
static const struct regmap_access_table twl4030_49_volatile_table = {
|
|
.yes_ranges = twl4030_49_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_config twl4030_regmap_config[4] = {
|
|
{
|
|
/* Address 0x48 */
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
},
|
|
{
|
|
/* Address 0x49 */
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
|
|
.readable_reg = twl4030_49_nop_reg,
|
|
.writeable_reg = twl4030_49_nop_reg,
|
|
|
|
.volatile_table = &twl4030_49_volatile_table,
|
|
|
|
.reg_defaults = twl4030_49_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(twl4030_49_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
},
|
|
{
|
|
/* Address 0x4a */
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
},
|
|
{
|
|
/* Address 0x4b */
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
},
|
|
};
|
|
|
|
static struct twl_mapping twl6030_map[] = {
|
|
/*
|
|
* NOTE: don't change this table without updating the
|
|
* <linux/mfd/twl.h> defines for TWL4030_MODULE_*
|
|
* so they continue to match the order in this table.
|
|
*/
|
|
|
|
/* Common IPs */
|
|
{ 1, TWL6030_BASEADD_USB },
|
|
{ 1, TWL6030_BASEADD_PIH },
|
|
{ 1, TWL6030_BASEADD_CHARGER },
|
|
{ 0, TWL6030_BASEADD_PM_MASTER },
|
|
{ 0, TWL6030_BASEADD_PM_SLAVE_MISC },
|
|
|
|
{ 0, TWL6030_BASEADD_RTC },
|
|
{ 1, TWL6030_BASEADD_PWM },
|
|
{ 1, TWL6030_BASEADD_LED },
|
|
{ 0, TWL6030_BASEADD_SECURED_REG },
|
|
|
|
/* TWL6030 specific IPs */
|
|
{ 0, TWL6030_BASEADD_ZERO },
|
|
{ 1, TWL6030_BASEADD_ZERO },
|
|
{ 2, TWL6030_BASEADD_ZERO },
|
|
{ 1, TWL6030_BASEADD_GPADC_CTRL },
|
|
{ 1, TWL6030_BASEADD_GASGAUGE },
|
|
|
|
/* TWL6032 specific charger registers */
|
|
{ 1, TWL6032_BASEADD_CHARGER },
|
|
};
|
|
|
|
static const struct regmap_config twl6030_regmap_config[3] = {
|
|
{
|
|
/* Address 0x48 */
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
},
|
|
{
|
|
/* Address 0x49 */
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
},
|
|
{
|
|
/* Address 0x4a */
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
},
|
|
};
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static inline int twl_get_num_slaves(void)
|
|
{
|
|
if (twl_class_is_4030())
|
|
return 4; /* TWL4030 class have four slave address */
|
|
else
|
|
return 3; /* TWL6030 class have three slave address */
|
|
}
|
|
|
|
static inline int twl_get_last_module(void)
|
|
{
|
|
if (twl_class_is_4030())
|
|
return TWL4030_MODULE_LAST;
|
|
else
|
|
return TWL6030_MODULE_LAST;
|
|
}
|
|
|
|
/* Exported Functions */
|
|
|
|
unsigned int twl_rev(void)
|
|
{
|
|
return twl_priv ? twl_priv->twl_id : 0;
|
|
}
|
|
EXPORT_SYMBOL(twl_rev);
|
|
|
|
/**
|
|
* twl_get_regmap - Get the regmap associated with the given module
|
|
* @mod_no: module number
|
|
*
|
|
* Returns the regmap pointer or NULL in case of failure.
|
|
*/
|
|
static struct regmap *twl_get_regmap(u8 mod_no)
|
|
{
|
|
int sid;
|
|
struct twl_client *twl;
|
|
|
|
if (unlikely(!twl_priv || !twl_priv->ready)) {
|
|
pr_err("%s: not initialized\n", DRIVER_NAME);
|
|
return NULL;
|
|
}
|
|
if (unlikely(mod_no >= twl_get_last_module())) {
|
|
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
|
|
return NULL;
|
|
}
|
|
|
|
sid = twl_priv->twl_map[mod_no].sid;
|
|
twl = &twl_priv->twl_modules[sid];
|
|
|
|
return twl->regmap;
|
|
}
|
|
|
|
/**
|
|
* twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0
|
|
* @mod_no: module number
|
|
* @value: an array of num_bytes+1 containing data to write
|
|
* @reg: register address (just offset will do)
|
|
* @num_bytes: number of bytes to transfer
|
|
*
|
|
* Returns 0 on success or else a negative error code.
|
|
*/
|
|
int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
|
|
{
|
|
struct regmap *regmap = twl_get_regmap(mod_no);
|
|
int ret;
|
|
|
|
if (!regmap)
|
|
return -EPERM;
|
|
|
|
ret = regmap_bulk_write(regmap, twl_priv->twl_map[mod_no].base + reg,
|
|
value, num_bytes);
|
|
|
|
if (ret)
|
|
pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n",
|
|
DRIVER_NAME, mod_no, reg, num_bytes);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl_i2c_write);
|
|
|
|
/**
|
|
* twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0
|
|
* @mod_no: module number
|
|
* @value: an array of num_bytes containing data to be read
|
|
* @reg: register address (just offset will do)
|
|
* @num_bytes: number of bytes to transfer
|
|
*
|
|
* Returns 0 on success or else a negative error code.
|
|
*/
|
|
int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
|
|
{
|
|
struct regmap *regmap = twl_get_regmap(mod_no);
|
|
int ret;
|
|
|
|
if (!regmap)
|
|
return -EPERM;
|
|
|
|
ret = regmap_bulk_read(regmap, twl_priv->twl_map[mod_no].base + reg,
|
|
value, num_bytes);
|
|
|
|
if (ret)
|
|
pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n",
|
|
DRIVER_NAME, mod_no, reg, num_bytes);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl_i2c_read);
|
|
|
|
/**
|
|
* twl_set_regcache_bypass - Configure the regcache bypass for the regmap associated
|
|
* with the module
|
|
* @mod_no: module number
|
|
* @enable: Regcache bypass state
|
|
*
|
|
* Returns 0 else failure.
|
|
*/
|
|
int twl_set_regcache_bypass(u8 mod_no, bool enable)
|
|
{
|
|
struct regmap *regmap = twl_get_regmap(mod_no);
|
|
|
|
if (!regmap)
|
|
return -EPERM;
|
|
|
|
regcache_cache_bypass(regmap, enable);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(twl_set_regcache_bypass);
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* twl_read_idcode_register - API to read the IDCODE register.
|
|
*
|
|
* Unlocks the IDCODE register and read the 32 bit value.
|
|
*/
|
|
static int twl_read_idcode_register(void)
|
|
{
|
|
int err;
|
|
|
|
err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, TWL_EEPROM_R_UNLOCK,
|
|
REG_UNLOCK_TEST_REG);
|
|
if (err) {
|
|
pr_err("TWL4030 Unable to unlock IDCODE registers -%d\n", err);
|
|
goto fail;
|
|
}
|
|
|
|
err = twl_i2c_read(TWL4030_MODULE_INTBR, (u8 *)(&twl_priv->twl_idcode),
|
|
REG_IDCODE_7_0, 4);
|
|
if (err) {
|
|
pr_err("TWL4030: unable to read IDCODE -%d\n", err);
|
|
goto fail;
|
|
}
|
|
|
|
err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, 0x0, REG_UNLOCK_TEST_REG);
|
|
if (err)
|
|
pr_err("TWL4030 Unable to relock IDCODE registers -%d\n", err);
|
|
fail:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* twl_get_type - API to get TWL Si type.
|
|
*
|
|
* Api to get the TWL Si type from IDCODE value.
|
|
*/
|
|
int twl_get_type(void)
|
|
{
|
|
return TWL_SIL_TYPE(twl_priv->twl_idcode);
|
|
}
|
|
EXPORT_SYMBOL_GPL(twl_get_type);
|
|
|
|
/**
|
|
* twl_get_version - API to get TWL Si version.
|
|
*
|
|
* Api to get the TWL Si version from IDCODE value.
|
|
*/
|
|
int twl_get_version(void)
|
|
{
|
|
return TWL_SIL_REV(twl_priv->twl_idcode);
|
|
}
|
|
EXPORT_SYMBOL_GPL(twl_get_version);
|
|
|
|
/**
|
|
* twl_get_hfclk_rate - API to get TWL external HFCLK clock rate.
|
|
*
|
|
* Api to get the TWL HFCLK rate based on BOOT_CFG register.
|
|
*/
|
|
int twl_get_hfclk_rate(void)
|
|
{
|
|
u8 ctrl;
|
|
int rate;
|
|
|
|
twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &ctrl, R_CFG_BOOT);
|
|
|
|
switch (ctrl & 0x3) {
|
|
case HFCLK_FREQ_19p2_MHZ:
|
|
rate = 19200000;
|
|
break;
|
|
case HFCLK_FREQ_26_MHZ:
|
|
rate = 26000000;
|
|
break;
|
|
case HFCLK_FREQ_38p4_MHZ:
|
|
rate = 38400000;
|
|
break;
|
|
default:
|
|
pr_err("TWL4030: HFCLK is not configured\n");
|
|
rate = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
EXPORT_SYMBOL_GPL(twl_get_hfclk_rate);
|
|
|
|
static struct device *
|
|
add_numbered_child(unsigned mod_no, const char *name, int num,
|
|
void *pdata, unsigned pdata_len,
|
|
bool can_wakeup, int irq0, int irq1)
|
|
{
|
|
struct platform_device *pdev;
|
|
struct twl_client *twl;
|
|
int status, sid;
|
|
|
|
if (unlikely(mod_no >= twl_get_last_module())) {
|
|
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
|
|
return ERR_PTR(-EPERM);
|
|
}
|
|
sid = twl_priv->twl_map[mod_no].sid;
|
|
twl = &twl_priv->twl_modules[sid];
|
|
|
|
pdev = platform_device_alloc(name, num);
|
|
if (!pdev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pdev->dev.parent = &twl->client->dev;
|
|
|
|
if (pdata) {
|
|
status = platform_device_add_data(pdev, pdata, pdata_len);
|
|
if (status < 0) {
|
|
dev_dbg(&pdev->dev, "can't add platform_data\n");
|
|
goto put_device;
|
|
}
|
|
}
|
|
|
|
if (irq0) {
|
|
struct resource r[2] = {
|
|
{ .start = irq0, .flags = IORESOURCE_IRQ, },
|
|
{ .start = irq1, .flags = IORESOURCE_IRQ, },
|
|
};
|
|
|
|
status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
|
|
if (status < 0) {
|
|
dev_dbg(&pdev->dev, "can't add irqs\n");
|
|
goto put_device;
|
|
}
|
|
}
|
|
|
|
status = platform_device_add(pdev);
|
|
if (status)
|
|
goto put_device;
|
|
|
|
device_init_wakeup(&pdev->dev, can_wakeup);
|
|
|
|
return &pdev->dev;
|
|
|
|
put_device:
|
|
platform_device_put(pdev);
|
|
dev_err(&twl->client->dev, "failed to add device %s\n", name);
|
|
return ERR_PTR(status);
|
|
}
|
|
|
|
static inline struct device *add_child(unsigned mod_no, const char *name,
|
|
void *pdata, unsigned pdata_len,
|
|
bool can_wakeup, int irq0, int irq1)
|
|
{
|
|
return add_numbered_child(mod_no, name, -1, pdata, pdata_len,
|
|
can_wakeup, irq0, irq1);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* These three functions initialize the on-chip clock framework,
|
|
* letting it generate the right frequencies for USB, MADC, and
|
|
* other purposes.
|
|
*/
|
|
static inline int protect_pm_master(void)
|
|
{
|
|
int e = 0;
|
|
|
|
e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
return e;
|
|
}
|
|
|
|
static inline int unprotect_pm_master(void)
|
|
{
|
|
int e = 0;
|
|
|
|
e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
|
|
return e;
|
|
}
|
|
|
|
static void clocks_init(struct device *dev)
|
|
{
|
|
int e = 0;
|
|
struct clk *osc;
|
|
u32 rate;
|
|
u8 ctrl = HFCLK_FREQ_26_MHZ;
|
|
|
|
osc = clk_get(dev, "fck");
|
|
if (IS_ERR(osc)) {
|
|
printk(KERN_WARNING "Skipping twl internal clock init and "
|
|
"using bootloader value (unknown osc rate)\n");
|
|
return;
|
|
}
|
|
|
|
rate = clk_get_rate(osc);
|
|
clk_put(osc);
|
|
|
|
switch (rate) {
|
|
case 19200000:
|
|
ctrl = HFCLK_FREQ_19p2_MHZ;
|
|
break;
|
|
case 26000000:
|
|
ctrl = HFCLK_FREQ_26_MHZ;
|
|
break;
|
|
case 38400000:
|
|
ctrl = HFCLK_FREQ_38p4_MHZ;
|
|
break;
|
|
}
|
|
|
|
ctrl |= HIGH_PERF_SQ;
|
|
|
|
e |= unprotect_pm_master();
|
|
/* effect->MADC+USB ck en */
|
|
e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
|
|
e |= protect_pm_master();
|
|
|
|
if (e < 0)
|
|
pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
|
|
static void twl_remove(struct i2c_client *client)
|
|
{
|
|
unsigned i, num_slaves;
|
|
|
|
if (twl_class_is_4030())
|
|
twl4030_exit_irq();
|
|
else
|
|
twl6030_exit_irq();
|
|
|
|
num_slaves = twl_get_num_slaves();
|
|
for (i = 0; i < num_slaves; i++) {
|
|
struct twl_client *twl = &twl_priv->twl_modules[i];
|
|
|
|
if (twl->client && twl->client != client)
|
|
i2c_unregister_device(twl->client);
|
|
twl->client = NULL;
|
|
}
|
|
twl_priv->ready = false;
|
|
}
|
|
|
|
static struct of_dev_auxdata twl_auxdata_lookup[] = {
|
|
OF_DEV_AUXDATA("ti,twl4030-gpio", 0, "twl4030-gpio", NULL),
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
/* NOTE: This driver only handles a single twl4030/tps659x0 chip */
|
|
static int
|
|
twl_probe(struct i2c_client *client)
|
|
{
|
|
const struct i2c_device_id *id = i2c_client_get_device_id(client);
|
|
struct device_node *node = client->dev.of_node;
|
|
struct platform_device *pdev;
|
|
const struct regmap_config *twl_regmap_config;
|
|
int irq_base = 0;
|
|
int status;
|
|
unsigned i, num_slaves;
|
|
|
|
if (!node) {
|
|
dev_err(&client->dev, "no platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (twl_priv) {
|
|
dev_dbg(&client->dev, "only one instance of %s allowed\n",
|
|
DRIVER_NAME);
|
|
return -EBUSY;
|
|
}
|
|
|
|
pdev = platform_device_alloc(DRIVER_NAME, -1);
|
|
if (!pdev) {
|
|
dev_err(&client->dev, "can't alloc pdev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
status = platform_device_add(pdev);
|
|
if (status) {
|
|
platform_device_put(pdev);
|
|
return status;
|
|
}
|
|
|
|
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
|
|
dev_dbg(&client->dev, "can't talk I2C?\n");
|
|
status = -EIO;
|
|
goto free;
|
|
}
|
|
|
|
twl_priv = devm_kzalloc(&client->dev, sizeof(struct twl_private),
|
|
GFP_KERNEL);
|
|
if (!twl_priv) {
|
|
status = -ENOMEM;
|
|
goto free;
|
|
}
|
|
|
|
if ((id->driver_data) & TWL6030_CLASS) {
|
|
twl_priv->twl_id = TWL6030_CLASS_ID;
|
|
twl_priv->twl_map = &twl6030_map[0];
|
|
twl_regmap_config = twl6030_regmap_config;
|
|
} else {
|
|
twl_priv->twl_id = TWL4030_CLASS_ID;
|
|
twl_priv->twl_map = &twl4030_map[0];
|
|
twl_regmap_config = twl4030_regmap_config;
|
|
}
|
|
|
|
num_slaves = twl_get_num_slaves();
|
|
twl_priv->twl_modules = devm_kcalloc(&client->dev,
|
|
num_slaves,
|
|
sizeof(struct twl_client),
|
|
GFP_KERNEL);
|
|
if (!twl_priv->twl_modules) {
|
|
status = -ENOMEM;
|
|
goto free;
|
|
}
|
|
|
|
for (i = 0; i < num_slaves; i++) {
|
|
struct twl_client *twl = &twl_priv->twl_modules[i];
|
|
|
|
if (i == 0) {
|
|
twl->client = client;
|
|
} else {
|
|
twl->client = i2c_new_dummy_device(client->adapter,
|
|
client->addr + i);
|
|
if (IS_ERR(twl->client)) {
|
|
dev_err(&client->dev,
|
|
"can't attach client %d\n", i);
|
|
status = PTR_ERR(twl->client);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
twl->regmap = devm_regmap_init_i2c(twl->client,
|
|
&twl_regmap_config[i]);
|
|
if (IS_ERR(twl->regmap)) {
|
|
status = PTR_ERR(twl->regmap);
|
|
dev_err(&client->dev,
|
|
"Failed to allocate regmap %d, err: %d\n", i,
|
|
status);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
twl_priv->ready = true;
|
|
|
|
/* setup clock framework */
|
|
clocks_init(&client->dev);
|
|
|
|
/* read TWL IDCODE Register */
|
|
if (twl_class_is_4030()) {
|
|
status = twl_read_idcode_register();
|
|
WARN(status < 0, "Error: reading twl_idcode register value\n");
|
|
}
|
|
|
|
/* Maybe init the T2 Interrupt subsystem */
|
|
if (client->irq) {
|
|
if (twl_class_is_4030()) {
|
|
twl4030_init_chip_irq(id->name);
|
|
irq_base = twl4030_init_irq(&client->dev, client->irq);
|
|
} else {
|
|
irq_base = twl6030_init_irq(&client->dev, client->irq);
|
|
}
|
|
|
|
if (irq_base < 0) {
|
|
status = irq_base;
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
|
|
* Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
|
|
* SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
|
|
*
|
|
* Also, always enable SmartReflex bit as that's needed for omaps to
|
|
* do anything over I2C4 for voltage scaling even if SmartReflex
|
|
* is disabled. Without the SmartReflex bit omap sys_clkreq idle
|
|
* signal will never trigger for retention idle.
|
|
*/
|
|
if (twl_class_is_4030()) {
|
|
u8 temp;
|
|
|
|
twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1);
|
|
temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
|
|
I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
|
|
twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
|
|
|
|
twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
|
|
TWL4030_DCDC_GLOBAL_CFG);
|
|
temp |= SMARTREFLEX_ENABLE;
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
|
|
TWL4030_DCDC_GLOBAL_CFG);
|
|
}
|
|
|
|
status = of_platform_populate(node, NULL, twl_auxdata_lookup,
|
|
&client->dev);
|
|
|
|
fail:
|
|
if (status < 0)
|
|
twl_remove(client);
|
|
free:
|
|
if (status < 0)
|
|
platform_device_unregister(pdev);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int __maybe_unused twl_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (client->irq)
|
|
disable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused twl_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (client->irq)
|
|
enable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume);
|
|
|
|
static const struct i2c_device_id twl_ids[] = {
|
|
{ "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
|
|
{ "twl5030", 0 }, /* T2 updated */
|
|
{ "twl5031", TWL5031 }, /* TWL5030 updated */
|
|
{ "tps65950", 0 }, /* catalog version of twl5030 */
|
|
{ "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
|
|
{ "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
|
|
{ "tps65921", TPS_SUBSET }, /* fewer LDOs; no codec, no LED
|
|
and vibrator. Charger in USB module*/
|
|
{ "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */
|
|
{ "twl6032", TWL6030_CLASS | TWL6032_SUBCLASS }, /* "Phoenix lite" */
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
/* One Client Driver , 4 Clients */
|
|
static struct i2c_driver twl_driver = {
|
|
.driver.name = DRIVER_NAME,
|
|
.driver.pm = &twl_dev_pm_ops,
|
|
.id_table = twl_ids,
|
|
.probe_new = twl_probe,
|
|
.remove = twl_remove,
|
|
};
|
|
builtin_i2c_driver(twl_driver);
|