843 lines
21 KiB
C
843 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MFD driver for TWL6040 audio device
|
|
*
|
|
* Authors: Misael Lopez Cruz <misael.lopez@ti.com>
|
|
* Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
|
|
* Peter Ujfalusi <peter.ujfalusi@ti.com>
|
|
*
|
|
* Copyright: (C) 2011 Texas Instruments, Inc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/twl6040.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
|
|
#define TWL6040_NUM_SUPPLIES (2)
|
|
|
|
static const struct reg_default twl6040_defaults[] = {
|
|
{ 0x01, 0x4B }, /* REG_ASICID (ro) */
|
|
{ 0x02, 0x00 }, /* REG_ASICREV (ro) */
|
|
{ 0x03, 0x00 }, /* REG_INTID */
|
|
{ 0x04, 0x00 }, /* REG_INTMR */
|
|
{ 0x05, 0x00 }, /* REG_NCPCTRL */
|
|
{ 0x06, 0x00 }, /* REG_LDOCTL */
|
|
{ 0x07, 0x60 }, /* REG_HPPLLCTL */
|
|
{ 0x08, 0x00 }, /* REG_LPPLLCTL */
|
|
{ 0x09, 0x4A }, /* REG_LPPLLDIV */
|
|
{ 0x0A, 0x00 }, /* REG_AMICBCTL */
|
|
{ 0x0B, 0x00 }, /* REG_DMICBCTL */
|
|
{ 0x0C, 0x00 }, /* REG_MICLCTL */
|
|
{ 0x0D, 0x00 }, /* REG_MICRCTL */
|
|
{ 0x0E, 0x00 }, /* REG_MICGAIN */
|
|
{ 0x0F, 0x1B }, /* REG_LINEGAIN */
|
|
{ 0x10, 0x00 }, /* REG_HSLCTL */
|
|
{ 0x11, 0x00 }, /* REG_HSRCTL */
|
|
{ 0x12, 0x00 }, /* REG_HSGAIN */
|
|
{ 0x13, 0x00 }, /* REG_EARCTL */
|
|
{ 0x14, 0x00 }, /* REG_HFLCTL */
|
|
{ 0x15, 0x00 }, /* REG_HFLGAIN */
|
|
{ 0x16, 0x00 }, /* REG_HFRCTL */
|
|
{ 0x17, 0x00 }, /* REG_HFRGAIN */
|
|
{ 0x18, 0x00 }, /* REG_VIBCTLL */
|
|
{ 0x19, 0x00 }, /* REG_VIBDATL */
|
|
{ 0x1A, 0x00 }, /* REG_VIBCTLR */
|
|
{ 0x1B, 0x00 }, /* REG_VIBDATR */
|
|
{ 0x1C, 0x00 }, /* REG_HKCTL1 */
|
|
{ 0x1D, 0x00 }, /* REG_HKCTL2 */
|
|
{ 0x1E, 0x00 }, /* REG_GPOCTL */
|
|
{ 0x1F, 0x00 }, /* REG_ALB */
|
|
{ 0x20, 0x00 }, /* REG_DLB */
|
|
/* 0x28, REG_TRIM1 */
|
|
/* 0x29, REG_TRIM2 */
|
|
/* 0x2A, REG_TRIM3 */
|
|
/* 0x2B, REG_HSOTRIM */
|
|
/* 0x2C, REG_HFOTRIM */
|
|
{ 0x2D, 0x08 }, /* REG_ACCCTL */
|
|
{ 0x2E, 0x00 }, /* REG_STATUS (ro) */
|
|
};
|
|
|
|
static struct reg_sequence twl6040_patch[] = {
|
|
/*
|
|
* Select I2C bus access to dual access registers
|
|
* Interrupt register is cleared on read
|
|
* Select fast mode for i2c (400KHz)
|
|
*/
|
|
{ TWL6040_REG_ACCCTL,
|
|
TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
|
|
};
|
|
|
|
|
|
static bool twl6040_has_vibra(struct device_node *parent)
|
|
{
|
|
struct device_node *node;
|
|
|
|
node = of_get_child_by_name(parent, "vibra");
|
|
if (node) {
|
|
of_node_put(node);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
|
|
{
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
ret = regmap_read(twl6040->regmap, reg, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL(twl6040_reg_read);
|
|
|
|
int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(twl6040->regmap, reg, val);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl6040_reg_write);
|
|
|
|
int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
|
|
{
|
|
return regmap_update_bits(twl6040->regmap, reg, mask, mask);
|
|
}
|
|
EXPORT_SYMBOL(twl6040_set_bits);
|
|
|
|
int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
|
|
{
|
|
return regmap_update_bits(twl6040->regmap, reg, mask, 0);
|
|
}
|
|
EXPORT_SYMBOL(twl6040_clear_bits);
|
|
|
|
/* twl6040 codec manual power-up sequence */
|
|
static int twl6040_power_up_manual(struct twl6040 *twl6040)
|
|
{
|
|
u8 ldoctl, ncpctl, lppllctl;
|
|
int ret;
|
|
|
|
/* enable high-side LDO, reference system and internal oscillator */
|
|
ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
|
|
ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
if (ret)
|
|
return ret;
|
|
usleep_range(10000, 10500);
|
|
|
|
/* enable negative charge pump */
|
|
ncpctl = TWL6040_NCPENA;
|
|
ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
|
|
if (ret)
|
|
goto ncp_err;
|
|
usleep_range(1000, 1500);
|
|
|
|
/* enable low-side LDO */
|
|
ldoctl |= TWL6040_LSLDOENA;
|
|
ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
if (ret)
|
|
goto lsldo_err;
|
|
usleep_range(1000, 1500);
|
|
|
|
/* enable low-power PLL */
|
|
lppllctl = TWL6040_LPLLENA;
|
|
ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
|
|
if (ret)
|
|
goto lppll_err;
|
|
usleep_range(5000, 5500);
|
|
|
|
/* disable internal oscillator */
|
|
ldoctl &= ~TWL6040_OSCENA;
|
|
ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
if (ret)
|
|
goto osc_err;
|
|
|
|
return 0;
|
|
|
|
osc_err:
|
|
lppllctl &= ~TWL6040_LPLLENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
|
|
lppll_err:
|
|
ldoctl &= ~TWL6040_LSLDOENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
lsldo_err:
|
|
ncpctl &= ~TWL6040_NCPENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
|
|
ncp_err:
|
|
ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
|
|
dev_err(twl6040->dev, "manual power-up failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* twl6040 manual power-down sequence */
|
|
static void twl6040_power_down_manual(struct twl6040 *twl6040)
|
|
{
|
|
u8 ncpctl, ldoctl, lppllctl;
|
|
|
|
ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
|
|
ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
|
|
lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
|
|
|
|
/* enable internal oscillator */
|
|
ldoctl |= TWL6040_OSCENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
usleep_range(1000, 1500);
|
|
|
|
/* disable low-power PLL */
|
|
lppllctl &= ~TWL6040_LPLLENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
|
|
|
|
/* disable low-side LDO */
|
|
ldoctl &= ~TWL6040_LSLDOENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
|
|
/* disable negative charge pump */
|
|
ncpctl &= ~TWL6040_NCPENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
|
|
|
|
/* disable high-side LDO, reference system and internal oscillator */
|
|
ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
|
|
}
|
|
|
|
static irqreturn_t twl6040_readyint_handler(int irq, void *data)
|
|
{
|
|
struct twl6040 *twl6040 = data;
|
|
|
|
complete(&twl6040->ready);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t twl6040_thint_handler(int irq, void *data)
|
|
{
|
|
struct twl6040 *twl6040 = data;
|
|
u8 status;
|
|
|
|
status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
|
|
if (status & TWL6040_TSHUTDET) {
|
|
dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
|
|
twl6040_power(twl6040, 0);
|
|
} else {
|
|
dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
|
|
twl6040_power(twl6040, 1);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int twl6040_power_up_automatic(struct twl6040 *twl6040)
|
|
{
|
|
int time_left;
|
|
|
|
gpiod_set_value_cansleep(twl6040->audpwron, 1);
|
|
|
|
time_left = wait_for_completion_timeout(&twl6040->ready,
|
|
msecs_to_jiffies(144));
|
|
if (!time_left) {
|
|
u8 intid;
|
|
|
|
dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
|
|
intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
|
|
if (!(intid & TWL6040_READYINT)) {
|
|
dev_err(twl6040->dev, "automatic power-up failed\n");
|
|
gpiod_set_value_cansleep(twl6040->audpwron, 0);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int twl6040_power(struct twl6040 *twl6040, int on)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&twl6040->mutex);
|
|
|
|
if (on) {
|
|
/* already powered-up */
|
|
if (twl6040->power_count++)
|
|
goto out;
|
|
|
|
ret = clk_prepare_enable(twl6040->clk32k);
|
|
if (ret) {
|
|
twl6040->power_count = 0;
|
|
goto out;
|
|
}
|
|
|
|
/* Allow writes to the chip */
|
|
regcache_cache_only(twl6040->regmap, false);
|
|
|
|
if (twl6040->audpwron) {
|
|
/* use automatic power-up sequence */
|
|
ret = twl6040_power_up_automatic(twl6040);
|
|
if (ret) {
|
|
clk_disable_unprepare(twl6040->clk32k);
|
|
twl6040->power_count = 0;
|
|
goto out;
|
|
}
|
|
} else {
|
|
/* use manual power-up sequence */
|
|
ret = twl6040_power_up_manual(twl6040);
|
|
if (ret) {
|
|
clk_disable_unprepare(twl6040->clk32k);
|
|
twl6040->power_count = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Register access can produce errors after power-up unless we
|
|
* wait at least 8ms based on measurements on duovero.
|
|
*/
|
|
usleep_range(10000, 12000);
|
|
|
|
/* Sync with the HW */
|
|
ret = regcache_sync(twl6040->regmap);
|
|
if (ret) {
|
|
dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
|
|
ret);
|
|
goto out;
|
|
}
|
|
|
|
/* Default PLL configuration after power up */
|
|
twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
|
|
twl6040->sysclk_rate = 19200000;
|
|
} else {
|
|
/* already powered-down */
|
|
if (!twl6040->power_count) {
|
|
dev_err(twl6040->dev,
|
|
"device is already powered-off\n");
|
|
ret = -EPERM;
|
|
goto out;
|
|
}
|
|
|
|
if (--twl6040->power_count)
|
|
goto out;
|
|
|
|
if (twl6040->audpwron) {
|
|
/* use AUDPWRON line */
|
|
gpiod_set_value_cansleep(twl6040->audpwron, 0);
|
|
|
|
/* power-down sequence latency */
|
|
usleep_range(500, 700);
|
|
} else {
|
|
/* use manual power-down sequence */
|
|
twl6040_power_down_manual(twl6040);
|
|
}
|
|
|
|
/* Set regmap to cache only and mark it as dirty */
|
|
regcache_cache_only(twl6040->regmap, true);
|
|
regcache_mark_dirty(twl6040->regmap);
|
|
|
|
twl6040->sysclk_rate = 0;
|
|
|
|
if (twl6040->pll == TWL6040_SYSCLK_SEL_HPPLL) {
|
|
clk_disable_unprepare(twl6040->mclk);
|
|
twl6040->mclk_rate = 0;
|
|
}
|
|
|
|
clk_disable_unprepare(twl6040->clk32k);
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&twl6040->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl6040_power);
|
|
|
|
int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
|
|
unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
u8 hppllctl, lppllctl;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&twl6040->mutex);
|
|
|
|
hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
|
|
lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
|
|
|
|
/* Force full reconfiguration when switching between PLL */
|
|
if (pll_id != twl6040->pll) {
|
|
twl6040->sysclk_rate = 0;
|
|
twl6040->mclk_rate = 0;
|
|
}
|
|
|
|
switch (pll_id) {
|
|
case TWL6040_SYSCLK_SEL_LPPLL:
|
|
/* low-power PLL divider */
|
|
/* Change the sysclk configuration only if it has been canged */
|
|
if (twl6040->sysclk_rate != freq_out) {
|
|
switch (freq_out) {
|
|
case 17640000:
|
|
lppllctl |= TWL6040_LPLLFIN;
|
|
break;
|
|
case 19200000:
|
|
lppllctl &= ~TWL6040_LPLLFIN;
|
|
break;
|
|
default:
|
|
dev_err(twl6040->dev,
|
|
"freq_out %d not supported\n",
|
|
freq_out);
|
|
ret = -EINVAL;
|
|
goto pll_out;
|
|
}
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
|
|
lppllctl);
|
|
}
|
|
|
|
/* The PLL in use has not been change, we can exit */
|
|
if (twl6040->pll == pll_id)
|
|
break;
|
|
|
|
switch (freq_in) {
|
|
case 32768:
|
|
lppllctl |= TWL6040_LPLLENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
|
|
lppllctl);
|
|
mdelay(5);
|
|
lppllctl &= ~TWL6040_HPLLSEL;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
|
|
lppllctl);
|
|
hppllctl &= ~TWL6040_HPLLENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
|
|
hppllctl);
|
|
break;
|
|
default:
|
|
dev_err(twl6040->dev,
|
|
"freq_in %d not supported\n", freq_in);
|
|
ret = -EINVAL;
|
|
goto pll_out;
|
|
}
|
|
|
|
clk_disable_unprepare(twl6040->mclk);
|
|
break;
|
|
case TWL6040_SYSCLK_SEL_HPPLL:
|
|
/* high-performance PLL can provide only 19.2 MHz */
|
|
if (freq_out != 19200000) {
|
|
dev_err(twl6040->dev,
|
|
"freq_out %d not supported\n", freq_out);
|
|
ret = -EINVAL;
|
|
goto pll_out;
|
|
}
|
|
|
|
if (twl6040->mclk_rate != freq_in) {
|
|
hppllctl &= ~TWL6040_MCLK_MSK;
|
|
|
|
switch (freq_in) {
|
|
case 12000000:
|
|
/* PLL enabled, active mode */
|
|
hppllctl |= TWL6040_MCLK_12000KHZ |
|
|
TWL6040_HPLLENA;
|
|
break;
|
|
case 19200000:
|
|
/* PLL enabled, bypass mode */
|
|
hppllctl |= TWL6040_MCLK_19200KHZ |
|
|
TWL6040_HPLLBP | TWL6040_HPLLENA;
|
|
break;
|
|
case 26000000:
|
|
/* PLL enabled, active mode */
|
|
hppllctl |= TWL6040_MCLK_26000KHZ |
|
|
TWL6040_HPLLENA;
|
|
break;
|
|
case 38400000:
|
|
/* PLL enabled, bypass mode */
|
|
hppllctl |= TWL6040_MCLK_38400KHZ |
|
|
TWL6040_HPLLBP | TWL6040_HPLLENA;
|
|
break;
|
|
default:
|
|
dev_err(twl6040->dev,
|
|
"freq_in %d not supported\n", freq_in);
|
|
ret = -EINVAL;
|
|
goto pll_out;
|
|
}
|
|
|
|
/* When switching to HPPLL, enable the mclk first */
|
|
if (pll_id != twl6040->pll)
|
|
clk_prepare_enable(twl6040->mclk);
|
|
/*
|
|
* enable clock slicer to ensure input waveform is
|
|
* square
|
|
*/
|
|
hppllctl |= TWL6040_HPLLSQRENA;
|
|
|
|
twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
|
|
hppllctl);
|
|
usleep_range(500, 700);
|
|
lppllctl |= TWL6040_HPLLSEL;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
|
|
lppllctl);
|
|
lppllctl &= ~TWL6040_LPLLENA;
|
|
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
|
|
lppllctl);
|
|
|
|
twl6040->mclk_rate = freq_in;
|
|
}
|
|
break;
|
|
default:
|
|
dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
|
|
ret = -EINVAL;
|
|
goto pll_out;
|
|
}
|
|
|
|
twl6040->sysclk_rate = freq_out;
|
|
twl6040->pll = pll_id;
|
|
|
|
pll_out:
|
|
mutex_unlock(&twl6040->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl6040_set_pll);
|
|
|
|
int twl6040_get_pll(struct twl6040 *twl6040)
|
|
{
|
|
if (twl6040->power_count)
|
|
return twl6040->pll;
|
|
else
|
|
return -ENODEV;
|
|
}
|
|
EXPORT_SYMBOL(twl6040_get_pll);
|
|
|
|
unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
|
|
{
|
|
return twl6040->sysclk_rate;
|
|
}
|
|
EXPORT_SYMBOL(twl6040_get_sysclk);
|
|
|
|
/* Get the combined status of the vibra control register */
|
|
int twl6040_get_vibralr_status(struct twl6040 *twl6040)
|
|
{
|
|
unsigned int reg;
|
|
int ret;
|
|
u8 status;
|
|
|
|
ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, ®);
|
|
if (ret != 0)
|
|
return ret;
|
|
status = reg;
|
|
|
|
ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, ®);
|
|
if (ret != 0)
|
|
return ret;
|
|
status |= reg;
|
|
|
|
status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
|
|
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(twl6040_get_vibralr_status);
|
|
|
|
static struct resource twl6040_vibra_rsrc[] = {
|
|
{
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource twl6040_codec_rsrc[] = {
|
|
{
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
/* Register 0 is not readable */
|
|
if (!reg)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TWL6040_REG_ASICID:
|
|
case TWL6040_REG_ASICREV:
|
|
case TWL6040_REG_INTID:
|
|
case TWL6040_REG_LPPLLCTL:
|
|
case TWL6040_REG_HPPLLCTL:
|
|
case TWL6040_REG_STATUS:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TWL6040_REG_ASICID:
|
|
case TWL6040_REG_ASICREV:
|
|
case TWL6040_REG_STATUS:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config twl6040_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.reg_defaults = twl6040_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
|
|
|
|
.max_register = TWL6040_REG_STATUS, /* 0x2e */
|
|
|
|
.readable_reg = twl6040_readable_reg,
|
|
.volatile_reg = twl6040_volatile_reg,
|
|
.writeable_reg = twl6040_writeable_reg,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
static const struct regmap_irq twl6040_irqs[] = {
|
|
{ .reg_offset = 0, .mask = TWL6040_THINT, },
|
|
{ .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
|
|
{ .reg_offset = 0, .mask = TWL6040_HOOKINT, },
|
|
{ .reg_offset = 0, .mask = TWL6040_HFINT, },
|
|
{ .reg_offset = 0, .mask = TWL6040_VIBINT, },
|
|
{ .reg_offset = 0, .mask = TWL6040_READYINT, },
|
|
};
|
|
|
|
static struct regmap_irq_chip twl6040_irq_chip = {
|
|
.name = "twl6040",
|
|
.irqs = twl6040_irqs,
|
|
.num_irqs = ARRAY_SIZE(twl6040_irqs),
|
|
|
|
.num_regs = 1,
|
|
.status_base = TWL6040_REG_INTID,
|
|
.mask_base = TWL6040_REG_INTMR,
|
|
};
|
|
|
|
static int twl6040_probe(struct i2c_client *client)
|
|
{
|
|
struct device_node *node = client->dev.of_node;
|
|
struct twl6040 *twl6040;
|
|
struct mfd_cell *cell = NULL;
|
|
int irq, ret, children = 0;
|
|
|
|
if (!node) {
|
|
dev_err(&client->dev, "of node is missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* In order to operate correctly we need valid interrupt config */
|
|
if (!client->irq) {
|
|
dev_err(&client->dev, "Invalid IRQ configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
|
|
GFP_KERNEL);
|
|
if (!twl6040)
|
|
return -ENOMEM;
|
|
|
|
twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
|
|
if (IS_ERR(twl6040->regmap))
|
|
return PTR_ERR(twl6040->regmap);
|
|
|
|
i2c_set_clientdata(client, twl6040);
|
|
|
|
twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
|
|
if (IS_ERR(twl6040->clk32k)) {
|
|
if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_dbg(&client->dev, "clk32k is not handled\n");
|
|
twl6040->clk32k = NULL;
|
|
}
|
|
|
|
twl6040->mclk = devm_clk_get(&client->dev, "mclk");
|
|
if (IS_ERR(twl6040->mclk)) {
|
|
if (PTR_ERR(twl6040->mclk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_dbg(&client->dev, "mclk is not handled\n");
|
|
twl6040->mclk = NULL;
|
|
}
|
|
|
|
twl6040->supplies[0].supply = "vio";
|
|
twl6040->supplies[1].supply = "v2v1";
|
|
ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
|
|
twl6040->supplies);
|
|
if (ret != 0) {
|
|
dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
|
|
if (ret != 0) {
|
|
dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
twl6040->dev = &client->dev;
|
|
twl6040->irq = client->irq;
|
|
|
|
mutex_init(&twl6040->mutex);
|
|
init_completion(&twl6040->ready);
|
|
|
|
regmap_register_patch(twl6040->regmap, twl6040_patch,
|
|
ARRAY_SIZE(twl6040_patch));
|
|
|
|
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
|
|
if (twl6040->rev < 0) {
|
|
dev_err(&client->dev, "Failed to read revision register: %d\n",
|
|
twl6040->rev);
|
|
ret = twl6040->rev;
|
|
goto gpio_err;
|
|
}
|
|
|
|
/* ERRATA: Automatic power-up is not possible in ES1.0 */
|
|
if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
|
|
twl6040->audpwron = devm_gpiod_get_optional(&client->dev,
|
|
"ti,audpwron",
|
|
GPIOD_OUT_LOW);
|
|
ret = PTR_ERR_OR_ZERO(twl6040->audpwron);
|
|
if (ret)
|
|
goto gpio_err;
|
|
|
|
gpiod_set_consumer_name(twl6040->audpwron, "audpwron");
|
|
|
|
/* Clear any pending interrupt */
|
|
twl6040_reg_read(twl6040, TWL6040_REG_INTID);
|
|
}
|
|
|
|
ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
|
|
0, &twl6040_irq_chip, &twl6040->irq_data);
|
|
if (ret < 0)
|
|
goto gpio_err;
|
|
|
|
twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
|
|
TWL6040_IRQ_READY);
|
|
twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
|
|
TWL6040_IRQ_TH);
|
|
|
|
ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
|
|
twl6040_readyint_handler, IRQF_ONESHOT,
|
|
"twl6040_irq_ready", twl6040);
|
|
if (ret) {
|
|
dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
|
|
goto readyirq_err;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
|
|
twl6040_thint_handler, IRQF_ONESHOT,
|
|
"twl6040_irq_th", twl6040);
|
|
if (ret) {
|
|
dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
|
|
goto readyirq_err;
|
|
}
|
|
|
|
/*
|
|
* The main functionality of twl6040 to provide audio on OMAP4+ systems.
|
|
* We can add the ASoC codec child whenever this driver has been loaded.
|
|
*/
|
|
irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
|
|
cell = &twl6040->cells[children];
|
|
cell->name = "twl6040-codec";
|
|
twl6040_codec_rsrc[0].start = irq;
|
|
twl6040_codec_rsrc[0].end = irq;
|
|
cell->resources = twl6040_codec_rsrc;
|
|
cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
|
|
children++;
|
|
|
|
/* Vibra input driver support */
|
|
if (twl6040_has_vibra(node)) {
|
|
irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
|
|
|
|
cell = &twl6040->cells[children];
|
|
cell->name = "twl6040-vibra";
|
|
twl6040_vibra_rsrc[0].start = irq;
|
|
twl6040_vibra_rsrc[0].end = irq;
|
|
cell->resources = twl6040_vibra_rsrc;
|
|
cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
|
|
children++;
|
|
}
|
|
|
|
/* GPO support */
|
|
cell = &twl6040->cells[children];
|
|
cell->name = "twl6040-gpo";
|
|
children++;
|
|
|
|
/* PDM clock support */
|
|
cell = &twl6040->cells[children];
|
|
cell->name = "twl6040-pdmclk";
|
|
children++;
|
|
|
|
/* The chip is powered down so mark regmap to cache only and dirty */
|
|
regcache_cache_only(twl6040->regmap, true);
|
|
regcache_mark_dirty(twl6040->regmap);
|
|
|
|
ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
|
|
NULL, 0, NULL);
|
|
if (ret)
|
|
goto readyirq_err;
|
|
|
|
return 0;
|
|
|
|
readyirq_err:
|
|
regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
|
|
gpio_err:
|
|
regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
|
|
return ret;
|
|
}
|
|
|
|
static void twl6040_remove(struct i2c_client *client)
|
|
{
|
|
struct twl6040 *twl6040 = i2c_get_clientdata(client);
|
|
|
|
if (twl6040->power_count)
|
|
twl6040_power(twl6040, 0);
|
|
|
|
regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
|
|
|
|
mfd_remove_devices(&client->dev);
|
|
|
|
regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
|
|
}
|
|
|
|
static const struct i2c_device_id twl6040_i2c_id[] = {
|
|
{ "twl6040", 0, },
|
|
{ "twl6041", 0, },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
|
|
|
|
static struct i2c_driver twl6040_driver = {
|
|
.driver = {
|
|
.name = "twl6040",
|
|
},
|
|
.probe_new = twl6040_probe,
|
|
.remove = twl6040_remove,
|
|
.id_table = twl6040_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(twl6040_driver);
|
|
|
|
MODULE_DESCRIPTION("TWL6040 MFD");
|
|
MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
|
|
MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
|
|
MODULE_LICENSE("GPL");
|