kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/drivers/net/ethernet/natsemi/macsonic.c

652 lines
17 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* macsonic.c
*
* (C) 2005 Finn Thain
*
* Converted to DMA API, converted to unified driver model, made it work as
* a module again, and from the mac68k project, introduced more 32-bit cards
* and dhd's support for 16-bit cards.
*
* (C) 1998 Alan Cox
*
* Debugging Andreas Ehliar, Michael Schmitz
*
* Based on code
* (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)
*
* This driver is based on work from Andreas Busse, but most of
* the code is rewritten.
*
* (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
*
* A driver for the Mac onboard Sonic ethernet chip.
*
* 98/12/21 MSch: judged from tests on Q800, it's basically working,
* but eating up both receive and transmit resources
* and duplicating packets. Needs more testing.
*
* 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.
*
* 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems
* on centris.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/nubus.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/bitrev.h>
#include <linux/slab.h>
#include <linux/pgtable.h>
#include <asm/io.h>
#include <asm/hwtest.h>
#include <asm/dma.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_via.h>
#include "sonic.h"
/* These should basically be bus-size and endian independent (since
the SONIC is at least smart enough that it uses the same endianness
as the host, unlike certain less enlightened Macintosh NICs) */
#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
+ lp->reg_offset))
#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
+ lp->reg_offset))
/* For onboard SONIC */
#define ONBOARD_SONIC_REGISTERS 0x50F0A000
#define ONBOARD_SONIC_PROM_BASE 0x50f08000
enum macsonic_type {
MACSONIC_DUODOCK,
MACSONIC_APPLE,
MACSONIC_APPLE16,
MACSONIC_DAYNA,
MACSONIC_DAYNALINK
};
/* For the built-in SONIC in the Duo Dock */
#define DUODOCK_SONIC_REGISTERS 0xe10000
#define DUODOCK_SONIC_PROM_BASE 0xe12000
/* For Apple-style NuBus SONIC */
#define APPLE_SONIC_REGISTERS 0
#define APPLE_SONIC_PROM_BASE 0x40000
/* Daynalink LC SONIC */
#define DAYNALINK_PROM_BASE 0x400000
/* For Dayna-style NuBus SONIC (haven't seen one yet) */
#define DAYNA_SONIC_REGISTERS 0x180000
/* This is what OpenBSD says. However, this is definitely in NuBus
ROM space so we should be able to get it by walking the NuBus
resource directories */
#define DAYNA_SONIC_MAC_ADDR 0xffe004
#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
/*
* For reversing the PROM address
*/
static inline void bit_reverse_addr(unsigned char addr[6])
{
int i;
for(i = 0; i < 6; i++)
addr[i] = bitrev8(addr[i]);
}
static int macsonic_open(struct net_device* dev)
{
int retval;
retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);
if (retval) {
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
dev->name, dev->irq);
goto err;
}
/* Under the A/UX interrupt scheme, the onboard SONIC interrupt gets
* moved from level 2 to level 3. Unfortunately we still get some
* level 2 interrupts so register the handler for both.
*/
if (dev->irq == IRQ_AUTO_3) {
retval = request_irq(IRQ_NUBUS_9, sonic_interrupt, 0,
"sonic", dev);
if (retval) {
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
dev->name, IRQ_NUBUS_9);
goto err_irq;
}
}
retval = sonic_open(dev);
if (retval)
goto err_irq_nubus;
return 0;
err_irq_nubus:
if (dev->irq == IRQ_AUTO_3)
free_irq(IRQ_NUBUS_9, dev);
err_irq:
free_irq(dev->irq, dev);
err:
return retval;
}
static int macsonic_close(struct net_device* dev)
{
int err;
err = sonic_close(dev);
free_irq(dev->irq, dev);
if (dev->irq == IRQ_AUTO_3)
free_irq(IRQ_NUBUS_9, dev);
return err;
}
static const struct net_device_ops macsonic_netdev_ops = {
.ndo_open = macsonic_open,
.ndo_stop = macsonic_close,
.ndo_start_xmit = sonic_send_packet,
.ndo_set_rx_mode = sonic_multicast_list,
.ndo_tx_timeout = sonic_tx_timeout,
.ndo_get_stats = sonic_get_stats,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
};
static int macsonic_init(struct net_device *dev)
{
struct sonic_local* lp = netdev_priv(dev);
int err = sonic_alloc_descriptors(dev);
if (err)
return err;
dev->netdev_ops = &macsonic_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
/*
* clear tally counter
*/
SONIC_WRITE(SONIC_CRCT, 0xffff);
SONIC_WRITE(SONIC_FAET, 0xffff);
SONIC_WRITE(SONIC_MPT, 0xffff);
return 0;
}
#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
memcmp(mac, "\x00\xA0\x40", 3) && \
memcmp(mac, "\x00\x80\x19", 3) && \
memcmp(mac, "\x00\x05\x02", 3))
static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
{
struct sonic_local *lp = netdev_priv(dev);
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
unsigned short val;
u8 addr[ETH_ALEN];
/*
* On NuBus boards we can sometimes look in the ROM resources.
* No such luck for comm-slot/onboard.
* On the PowerBook 520, the PROM base address is a mystery.
*/
if (hwreg_present((void *)prom_addr)) {
int i;
for (i = 0; i < 6; i++)
addr[i] = SONIC_READ_PROM(i);
eth_hw_addr_set(dev, addr);
if (!INVALID_MAC(dev->dev_addr))
return;
/*
* Most of the time, the address is bit-reversed. The NetBSD
* source has a rather long and detailed historical account of
* why this is so.
*/
bit_reverse_addr(addr);
eth_hw_addr_set(dev, addr);
if (!INVALID_MAC(dev->dev_addr))
return;
/*
* If we still have what seems to be a bogus address, we'll
* look in the CAM. The top entry should be ours.
*/
printk(KERN_WARNING "macsonic: MAC address in PROM seems "
"to be invalid, trying CAM\n");
} else {
printk(KERN_WARNING "macsonic: cannot read MAC address from "
"PROM, trying CAM\n");
}
/* This only works if MacOS has already initialized the card. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
SONIC_WRITE(SONIC_CEP, 15);
val = SONIC_READ(SONIC_CAP2);
addr[5] = val >> 8;
addr[4] = val & 0xff;
val = SONIC_READ(SONIC_CAP1);
addr[3] = val >> 8;
addr[2] = val & 0xff;
val = SONIC_READ(SONIC_CAP0);
addr[1] = val >> 8;
addr[0] = val & 0xff;
eth_hw_addr_set(dev, addr);
if (!INVALID_MAC(dev->dev_addr))
return;
/* Still nonsense ... messed up someplace! */
printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
"seems invalid, will use a random MAC\n");
eth_hw_addr_random(dev);
}
static int mac_onboard_sonic_probe(struct net_device *dev)
{
struct sonic_local* lp = netdev_priv(dev);
int sr;
bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM;
/* Bogus probing, on the models which may or may not have
Ethernet (BTW, the Ethernet *is* always at the same
address, and nothing else lives there, at least if Apple's
documentation is to be believed) */
if (commslot || macintosh_config->ident == MAC_MODEL_C610) {
int card_present;
card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
if (!card_present) {
pr_info("Onboard/comm-slot SONIC not found\n");
return -ENODEV;
}
}
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
dev->base_addr = ONBOARD_SONIC_REGISTERS;
if (via_alt_mapping)
dev->irq = IRQ_AUTO_3;
else
dev->irq = IRQ_NUBUS_9;
/* The PowerBook's SONIC is 16 bit always. */
if (macintosh_config->ident == MAC_MODEL_PB520) {
lp->reg_offset = 0;
lp->dma_bitmode = SONIC_BITMODE16;
} else if (commslot) {
/* Some of the comm-slot cards are 16 bit. But some
of them are not. The 32-bit cards use offset 2 and
have known revisions, we try reading the revision
register at offset 2, if we don't get a known revision
we assume 16 bit at offset 0. */
lp->reg_offset = 2;
lp->dma_bitmode = SONIC_BITMODE16;
sr = SONIC_READ(SONIC_SR);
if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)
/* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
lp->dma_bitmode = SONIC_BITMODE32;
else {
lp->dma_bitmode = SONIC_BITMODE16;
lp->reg_offset = 0;
}
} else {
/* All onboard cards are at offset 2 with 32 bit DMA. */
lp->reg_offset = 2;
lp->dma_bitmode = SONIC_BITMODE32;
}
pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n",
SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16,
lp->reg_offset);
/* This is sometimes useful to find out how MacOS configured the card */
pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
SONIC_READ(SONIC_DCR) & 0xffff,
SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
(lp->dma_bitmode ? SONIC_DCR_DW : 0));
/* This *must* be written back to in order to restore the
* extended programmable output bits, as it may not have been
* initialised since the hardware reset. */
SONIC_WRITE(SONIC_DCR2, 0);
/* Clear *and* disable interrupts to be on the safe side */
SONIC_WRITE(SONIC_IMR, 0);
SONIC_WRITE(SONIC_ISR, 0x7fff);
/* Now look for the MAC address. */
mac_onboard_sonic_ethernet_addr(dev);
pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
dev->base_addr, dev->dev_addr, dev->irq);
/* Shared init code */
return macsonic_init(dev);
}
static int mac_sonic_nubus_ethernet_addr(struct net_device *dev,
unsigned long prom_addr, int id)
{
u8 addr[ETH_ALEN];
int i;
for(i = 0; i < 6; i++)
addr[i] = SONIC_READ_PROM(i);
/* Some of the addresses are bit-reversed */
if (id != MACSONIC_DAYNA)
bit_reverse_addr(addr);
eth_hw_addr_set(dev, addr);
return 0;
}
static int macsonic_ident(struct nubus_rsrc *fres)
{
if (fres->dr_hw == NUBUS_DRHW_ASANTE_LC &&
fres->dr_sw == NUBUS_DRSW_SONIC_LC)
return MACSONIC_DAYNALINK;
if (fres->dr_hw == NUBUS_DRHW_SONIC &&
fres->dr_sw == NUBUS_DRSW_APPLE) {
/* There has to be a better way to do this... */
if (strstr(fres->board->name, "DuoDock"))
return MACSONIC_DUODOCK;
else
return MACSONIC_APPLE;
}
if (fres->dr_hw == NUBUS_DRHW_SMC9194 &&
fres->dr_sw == NUBUS_DRSW_DAYNA)
return MACSONIC_DAYNA;
if (fres->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC &&
fres->dr_sw == 0) { /* huh? */
return MACSONIC_APPLE16;
}
return -1;
}
static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id,
struct net_device *dev)
{
struct sonic_local* lp = netdev_priv(dev);
unsigned long base_addr, prom_addr;
u16 sonic_dcr;
int reg_offset, dma_bitmode;
switch (id) {
case MACSONIC_DUODOCK:
base_addr = board->slot_addr + DUODOCK_SONIC_REGISTERS;
prom_addr = board->slot_addr + DUODOCK_SONIC_PROM_BASE;
sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
SONIC_DCR_TFT0;
reg_offset = 2;
dma_bitmode = SONIC_BITMODE32;
break;
case MACSONIC_APPLE:
base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;
sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
reg_offset = 0;
dma_bitmode = SONIC_BITMODE32;
break;
case MACSONIC_APPLE16:
base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;
sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
SONIC_DCR_PO1 | SONIC_DCR_BMS;
reg_offset = 0;
dma_bitmode = SONIC_BITMODE16;
break;
case MACSONIC_DAYNALINK:
base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = board->slot_addr + DAYNALINK_PROM_BASE;
sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
SONIC_DCR_PO1 | SONIC_DCR_BMS;
reg_offset = 0;
dma_bitmode = SONIC_BITMODE16;
break;
case MACSONIC_DAYNA:
base_addr = board->slot_addr + DAYNA_SONIC_REGISTERS;
prom_addr = board->slot_addr + DAYNA_SONIC_MAC_ADDR;
sonic_dcr = SONIC_DCR_BMS |
SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
reg_offset = 0;
dma_bitmode = SONIC_BITMODE16;
break;
default:
printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
return -ENODEV;
}
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
dev->base_addr = base_addr;
lp->reg_offset = reg_offset;
lp->dma_bitmode = dma_bitmode;
dev->irq = SLOT2IRQ(board->slot);
dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n",
board->name, SONIC_READ(SONIC_SR),
lp->dma_bitmode ? 32 : 16, lp->reg_offset);
/* This is sometimes useful to find out how MacOS configured the card */
dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
SONIC_READ(SONIC_DCR) & 0xffff,
SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
/* This *must* be written back to in order to restore the
* extended programmable output bits, since it may not have been
* initialised since the hardware reset. */
SONIC_WRITE(SONIC_DCR2, 0);
/* Clear *and* disable interrupts to be on the safe side */
SONIC_WRITE(SONIC_IMR, 0);
SONIC_WRITE(SONIC_ISR, 0x7fff);
/* Now look for the MAC address. */
if (mac_sonic_nubus_ethernet_addr(dev, prom_addr, id) != 0)
return -ENODEV;
dev_info(&board->dev, "SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
dev->base_addr, dev->dev_addr, dev->irq);
/* Shared init code */
return macsonic_init(dev);
}
static int mac_sonic_platform_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct sonic_local *lp;
int err;
dev = alloc_etherdev(sizeof(struct sonic_local));
if (!dev)
return -ENOMEM;
lp = netdev_priv(dev);
lp->device = &pdev->dev;
SET_NETDEV_DEV(dev, &pdev->dev);
platform_set_drvdata(pdev, dev);
err = mac_onboard_sonic_probe(dev);
if (err)
goto out;
sonic_msg_init(dev);
err = register_netdev(dev);
if (err)
goto undo_probe;
return 0;
undo_probe:
dma_free_coherent(lp->device,
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
out:
free_netdev(dev);
return err;
}
MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
MODULE_ALIAS("platform:macsonic");
#include "sonic.c"
static int mac_sonic_platform_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct sonic_local* lp = netdev_priv(dev);
unregister_netdev(dev);
dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
free_netdev(dev);
return 0;
}
static struct platform_driver mac_sonic_platform_driver = {
.probe = mac_sonic_platform_probe,
.remove = mac_sonic_platform_remove,
.driver = {
.name = "macsonic",
},
};
static int mac_sonic_nubus_probe(struct nubus_board *board)
{
struct net_device *ndev;
struct sonic_local *lp;
struct nubus_rsrc *fres;
int id = -1;
int err;
/* The platform driver will handle a PDS or Comm Slot card (even if
* it has a pseudoslot declaration ROM).
*/
if (macintosh_config->expansion_type == MAC_EXP_PDS_COMM)
return -ENODEV;
for_each_board_func_rsrc(board, fres) {
if (fres->category != NUBUS_CAT_NETWORK ||
fres->type != NUBUS_TYPE_ETHERNET)
continue;
id = macsonic_ident(fres);
if (id != -1)
break;
}
if (!fres)
return -ENODEV;
ndev = alloc_etherdev(sizeof(struct sonic_local));
if (!ndev)
return -ENOMEM;
lp = netdev_priv(ndev);
lp->device = &board->dev;
SET_NETDEV_DEV(ndev, &board->dev);
err = mac_sonic_nubus_probe_board(board, id, ndev);
if (err)
goto out;
sonic_msg_init(ndev);
err = register_netdev(ndev);
if (err)
goto undo_probe;
nubus_set_drvdata(board, ndev);
return 0;
undo_probe:
dma_free_coherent(lp->device,
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
out:
free_netdev(ndev);
return err;
}
static void mac_sonic_nubus_remove(struct nubus_board *board)
{
struct net_device *ndev = nubus_get_drvdata(board);
struct sonic_local *lp = netdev_priv(ndev);
unregister_netdev(ndev);
dma_free_coherent(lp->device,
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
free_netdev(ndev);
}
static struct nubus_driver mac_sonic_nubus_driver = {
.probe = mac_sonic_nubus_probe,
.remove = mac_sonic_nubus_remove,
.driver = {
.name = "macsonic-nubus",
.owner = THIS_MODULE,
},
};
static int perr, nerr;
static int __init mac_sonic_init(void)
{
perr = platform_driver_register(&mac_sonic_platform_driver);
nerr = nubus_driver_register(&mac_sonic_nubus_driver);
return 0;
}
module_init(mac_sonic_init);
static void __exit mac_sonic_exit(void)
{
if (!perr)
platform_driver_unregister(&mac_sonic_platform_driver);
if (!nerr)
nubus_driver_unregister(&mac_sonic_nubus_driver);
}
module_exit(mac_sonic_exit);
Reference in New Issue View Git Blame Copy Permalink