305 lines
10 KiB
C
305 lines
10 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* Copyright (c) 1999-2013 Petko Manolov (petkan@nucleusys.com)
|
|
*/
|
|
|
|
|
|
#ifndef PEGASUS_DEV
|
|
|
|
#define PEGASUS_II 0x80000000
|
|
#define HAS_HOME_PNA 0x40000000
|
|
|
|
#define PEGASUS_MTU 1536
|
|
|
|
#define EPROM_WRITE 0x01
|
|
#define EPROM_READ 0x02
|
|
#define EPROM_DONE 0x04
|
|
#define EPROM_WR_ENABLE 0x10
|
|
#define EPROM_LOAD 0x20
|
|
|
|
#define PHY_DONE 0x80
|
|
#define PHY_READ 0x40
|
|
#define PHY_WRITE 0x20
|
|
#define DEFAULT_GPIO_RESET 0x24
|
|
#define DEFAULT_GPIO_SET 0x26
|
|
|
|
#define PEGASUS_PRESENT 0x00000001
|
|
#define PEGASUS_TX_BUSY 0x00000004
|
|
#define PEGASUS_RX_BUSY 0x00000008
|
|
#define CTRL_URB_RUNNING 0x00000010
|
|
#define CTRL_URB_SLEEP 0x00000020
|
|
#define PEGASUS_UNPLUG 0x00000040
|
|
#define PEGASUS_RX_URB_FAIL 0x00000080
|
|
|
|
#define RX_MULTICAST 2
|
|
#define RX_PROMISCUOUS 4
|
|
|
|
#define REG_TIMEOUT (HZ)
|
|
#define PEGASUS_TX_TIMEOUT (HZ*10)
|
|
|
|
#define TX_UNDERRUN 0x80
|
|
#define EXCESSIVE_COL 0x40
|
|
#define LATE_COL 0x20
|
|
#define NO_CARRIER 0x10
|
|
#define LOSS_CARRIER 0x08
|
|
#define JABBER_TIMEOUT 0x04
|
|
|
|
#define LINK_STATUS 0x01
|
|
|
|
#define PEGASUS_REQT_READ 0xc0
|
|
#define PEGASUS_REQT_WRITE 0x40
|
|
#define PEGASUS_REQ_GET_REGS 0xf0
|
|
#define PEGASUS_REQ_SET_REGS 0xf1
|
|
#define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS
|
|
|
|
enum pegasus_registers {
|
|
EthCtrl0 = 0,
|
|
EthCtrl1 = 1,
|
|
EthCtrl2 = 2,
|
|
EthID = 0x10,
|
|
Reg1d = 0x1d,
|
|
EpromOffset = 0x20,
|
|
EpromData = 0x21, /* 0x21 low, 0x22 high byte */
|
|
EpromCtrl = 0x23,
|
|
PhyAddr = 0x25,
|
|
PhyData = 0x26, /* 0x26 low, 0x27 high byte */
|
|
PhyCtrl = 0x28,
|
|
UsbStst = 0x2a,
|
|
EthTxStat0 = 0x2b,
|
|
EthTxStat1 = 0x2c,
|
|
EthRxStat = 0x2d,
|
|
WakeupControl = 0x78,
|
|
Reg7b = 0x7b,
|
|
Gpio0 = 0x7e,
|
|
Gpio1 = 0x7f,
|
|
Reg81 = 0x81,
|
|
};
|
|
|
|
|
|
typedef struct pegasus {
|
|
struct usb_device *usb;
|
|
struct usb_interface *intf;
|
|
struct net_device *net;
|
|
struct mii_if_info mii;
|
|
unsigned flags;
|
|
unsigned features;
|
|
u32 msg_enable;
|
|
u32 wolopts;
|
|
int dev_index;
|
|
int intr_interval;
|
|
struct tasklet_struct rx_tl;
|
|
struct delayed_work carrier_check;
|
|
struct urb *rx_urb, *tx_urb, *intr_urb;
|
|
struct sk_buff *rx_skb;
|
|
int chip;
|
|
unsigned char intr_buff[8];
|
|
__u8 tx_buff[PEGASUS_MTU];
|
|
__u8 eth_regs[4];
|
|
__u8 phy;
|
|
__u8 gpio_res;
|
|
} pegasus_t;
|
|
|
|
|
|
struct usb_eth_dev {
|
|
char *name;
|
|
__u16 vendor;
|
|
__u16 device;
|
|
__u32 private; /* LSB is gpio reset value */
|
|
};
|
|
|
|
#define VENDOR_3COM 0x0506
|
|
#define VENDOR_ABOCOM 0x07b8
|
|
#define VENDOR_ACCTON 0x083a
|
|
#define VENDOR_ADMTEK 0x07a6
|
|
#define VENDOR_AEILAB 0x3334
|
|
#define VENDOR_ALLIEDTEL 0x07c9
|
|
#define VENDOR_ATEN 0x0557
|
|
#define VENDOR_BELKIN 0x050d
|
|
#define VENDOR_BILLIONTON 0x08dd
|
|
#define VENDOR_COMPAQ 0x049f
|
|
#define VENDOR_COREGA 0x07aa
|
|
#define VENDOR_DLINK 0x2001
|
|
#define VENDOR_ELCON 0x0db7
|
|
#define VENDOR_ELECOM 0x056e
|
|
#define VENDOR_ELSA 0x05cc
|
|
#define VENDOR_GIGABYTE 0x1044
|
|
#define VENDOR_HAWKING 0x0e66
|
|
#define VENDOR_HP 0x03f0
|
|
#define VENDOR_IODATA 0x04bb
|
|
#define VENDOR_KINGSTON 0x0951
|
|
#define VENDOR_LANEED 0x056e
|
|
#define VENDOR_LINKSYS 0x066b
|
|
#define VENDOR_LINKSYS2 0x077b
|
|
#define VENDOR_MELCO 0x0411
|
|
#define VENDOR_MICROSOFT 0x045e
|
|
#define VENDOR_MOBILITY 0x1342
|
|
#define VENDOR_NETGEAR 0x0846
|
|
#define VENDOR_OCT 0x0b39
|
|
#define VENDOR_SMARTBRIDGES 0x08d1
|
|
#define VENDOR_SMC 0x0707
|
|
#define VENDOR_SOHOWARE 0x15e8
|
|
#define VENDOR_SIEMENS 0x067c
|
|
|
|
|
|
#else /* PEGASUS_DEV */
|
|
|
|
PEGASUS_DEV("3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
|
|
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
|
|
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
|
|
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
|
|
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
|
|
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
|
|
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
|
|
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
|
|
VENDOR_ADMTEK, 0x8511,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
|
|
PEGASUS_DEV("ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
|
|
VENDOR_ADMTEK, 0x8513,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
|
|
VENDOR_ADMTEK, 0x8515,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
|
|
VENDOR_ADMTEK, 0x0986,
|
|
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
|
|
PEGASUS_DEV("AN986A USB MAC", VENDOR_ADMTEK, 1986,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
/*
|
|
* Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
|
|
* with the same product IDs by checking the device class too.
|
|
*/
|
|
PEGASUS_DEV_CLASS("Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
|
|
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
|
|
PEGASUS_DEV("iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
|
|
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
|
|
PEGASUS_DEV("D-Link DSB-650", VENDOR_DLINK, 0xabc1,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
|
|
PEGASUS_DEV("ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
|
|
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
|
|
PEGASUS_DEV("Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("OCT Inc.", VENDOR_OCT, 0x0109,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
|
|
DEFAULT_GPIO_RESET)
|
|
PEGASUS_DEV("SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
|
|
DEFAULT_GPIO_RESET | PEGASUS_II)
|
|
|
|
|
|
#endif /* PEGASUS_DEV */
|