kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/drivers/net/wireless/ath/ath10k/core.c

3711 lines
97 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: ISC
/*
* Copyright (c) 2005-2011 Atheros Communications Inc.
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
*/
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/dmi.h>
#include <linux/ctype.h>
#include <linux/pm_qos.h>
#include <linux/nvmem-consumer.h>
#include <asm/byteorder.h>
#include "core.h"
#include "mac.h"
#include "htc.h"
#include "hif.h"
#include "wmi.h"
#include "bmi.h"
#include "debug.h"
#include "htt.h"
#include "testmode.h"
#include "wmi-ops.h"
#include "coredump.h"
unsigned int ath10k_debug_mask;
EXPORT_SYMBOL(ath10k_debug_mask);
static unsigned int ath10k_cryptmode_param;
static bool uart_print;
static bool skip_otp;
static bool fw_diag_log;
/* frame mode values are mapped as per enum ath10k_hw_txrx_mode */
unsigned int ath10k_frame_mode = ATH10K_HW_TXRX_NATIVE_WIFI;
unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
/* FIXME: most of these should be readonly */
module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
module_param(uart_print, bool, 0644);
module_param(skip_otp, bool, 0644);
module_param(fw_diag_log, bool, 0644);
module_param_named(frame_mode, ath10k_frame_mode, uint, 0644);
module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
MODULE_PARM_DESC(frame_mode,
"Datapath frame mode (0: raw, 1: native wifi (default), 2: ethernet)");
MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
.id = QCA988X_HW_2_0_VERSION,
.dev_id = QCA988X_2_0_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca988x hw2.0",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 2116,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
.board_size = QCA988X_BOARD_DATA_SZ,
.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca988x_ops,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = true,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA988X_HW_2_0_VERSION,
.dev_id = QCA988X_2_0_DEVICE_ID_UBNT,
.name = "qca988x hw2.0 ubiquiti",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 2116,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
.board_size = QCA988X_BOARD_DATA_SZ,
.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca988x_ops,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = true,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA9887_HW_1_0_VERSION,
.dev_id = QCA9887_1_0_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca9887 hw1.0",
.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 2116,
.fw = {
.dir = QCA9887_HW_1_0_FW_DIR,
.board = QCA9887_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA9887_BOARD_DATA_SZ,
.board_ext_size = QCA9887_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca988x_ops,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA6174_HW_3_2_VERSION,
.dev_id = QCA6174_3_2_DEVICE_ID,
.bus = ATH10K_BUS_SDIO,
.name = "qca6174 hw3.2 sdio",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 19,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 0,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca6174_sdio_ops,
.hw_clk = qca6174_clk,
.target_cpu_freq = 176000000,
.decap_align_bytes = 4,
.n_cipher_suites = 8,
.num_peers = 10,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
.tx_stats_over_pktlog = false,
.credit_size_workaround = false,
.bmi_large_size_download = true,
.supports_peer_stats_info = true,
.dynamic_sar_support = true,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA6174_HW_2_1_VERSION,
.dev_id = QCA6164_2_1_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca6164 hw2.1",
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.board = QCA6174_HW_2_1_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca988x_ops,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA6174_HW_2_1_VERSION,
.dev_id = QCA6174_2_1_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca6174 hw2.1",
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.board = QCA6174_HW_2_1_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca988x_ops,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA6174_HW_3_0_VERSION,
.dev_id = QCA6174_2_1_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca6174 hw3.0",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca988x_ops,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA6174_HW_3_2_VERSION,
.dev_id = QCA6174_2_1_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca6174 hw3.2",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
.board_size = QCA6174_BOARD_DATA_SZ,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca6174_ops,
.hw_clk = qca6174_clk,
.target_cpu_freq = 176000000,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.supports_peer_stats_info = true,
.dynamic_sar_support = true,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
.dev_id = QCA99X0_2_0_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca99x0 hw2.0",
.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.cck_rate_map_rev2 = true,
.channel_counters_freq_hz = 150000,
.max_probe_resp_desc_thres = 24,
.tx_chain_mask = 0xf,
.rx_chain_mask = 0xf,
.max_spatial_stream = 4,
.cal_data_len = 12064,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.board = QCA99X0_HW_2_0_BOARD_DATA_FILE,
.board_size = QCA99X0_BOARD_DATA_SZ,
.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
},
.sw_decrypt_mcast_mgmt = true,
.rx_desc_ops = &qca99x0_rx_desc_ops,
.hw_ops = &qca99x0_ops,
.decap_align_bytes = 1,
.spectral_bin_discard = 4,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 11,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA9984_HW_1_0_DEV_VERSION,
.dev_id = QCA9984_1_0_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca9984/qca9994 hw1.0",
.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.cck_rate_map_rev2 = true,
.channel_counters_freq_hz = 150000,
.max_probe_resp_desc_thres = 24,
.tx_chain_mask = 0xf,
.rx_chain_mask = 0xf,
.max_spatial_stream = 4,
.cal_data_len = 12064,
.fw = {
.dir = QCA9984_HW_1_0_FW_DIR,
.board = QCA9984_HW_1_0_BOARD_DATA_FILE,
.eboard = QCA9984_HW_1_0_EBOARD_DATA_FILE,
.board_size = QCA99X0_BOARD_DATA_SZ,
.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
.ext_board_size = QCA99X0_EXT_BOARD_DATA_SZ,
},
.sw_decrypt_mcast_mgmt = true,
.rx_desc_ops = &qca99x0_rx_desc_ops,
.hw_ops = &qca99x0_ops,
.decap_align_bytes = 1,
.spectral_bin_discard = 12,
.spectral_bin_offset = 8,
/* Can do only 2x2 VHT160 or 80+80. 1560Mbps is 4x4 80Mhz
* or 2x2 160Mhz, long-guard-interval.
*/
.vht160_mcs_rx_highest = 1560,
.vht160_mcs_tx_highest = 1560,
.n_cipher_suites = 11,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA9888_HW_2_0_DEV_VERSION,
.dev_id = QCA9888_2_0_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca9888 hw2.0",
.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.channel_counters_freq_hz = 150000,
.max_probe_resp_desc_thres = 24,
.tx_chain_mask = 3,
.rx_chain_mask = 3,
.max_spatial_stream = 2,
.cal_data_len = 12064,
.fw = {
.dir = QCA9888_HW_2_0_FW_DIR,
.board = QCA9888_HW_2_0_BOARD_DATA_FILE,
.board_size = QCA99X0_BOARD_DATA_SZ,
.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
},
.sw_decrypt_mcast_mgmt = true,
.rx_desc_ops = &qca99x0_rx_desc_ops,
.hw_ops = &qca99x0_ops,
.decap_align_bytes = 1,
.spectral_bin_discard = 12,
.spectral_bin_offset = 8,
/* Can do only 1x1 VHT160 or 80+80. 780Mbps is 2x2 80Mhz or
* 1x1 160Mhz, long-guard-interval.
*/
.vht160_mcs_rx_highest = 780,
.vht160_mcs_tx_highest = 780,
.n_cipher_suites = 11,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA9377_HW_1_0_DEV_VERSION,
.dev_id = QCA9377_1_0_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca9377 hw1.0",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca988x_ops,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
.dev_id = QCA9377_1_0_DEVICE_ID,
.bus = ATH10K_BUS_PCI,
.name = "qca9377 hw1.1",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca6174_ops,
.hw_clk = qca6174_clk,
.target_cpu_freq = 176000000,
.decap_align_bytes = 4,
.spectral_bin_discard = 0,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
.dev_id = QCA9377_1_0_DEVICE_ID,
.bus = ATH10K_BUS_SDIO,
.name = "qca9377 hw1.1 sdio",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 19,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
},
.rx_desc_ops = &qca988x_rx_desc_ops,
.hw_ops = &qca6174_ops,
.hw_clk = qca6174_clk,
.target_cpu_freq = 176000000,
.decap_align_bytes = 4,
.n_cipher_suites = 8,
.num_peers = TARGET_QCA9377_HL_NUM_PEERS,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
.credit_size_workaround = true,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = QCA4019_HW_1_0_DEV_VERSION,
.dev_id = 0,
.bus = ATH10K_BUS_AHB,
.name = "qca4019 hw1.0",
.patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
.otp_exe_param = 0x0010000,
.continuous_frag_desc = true,
.cck_rate_map_rev2 = true,
.channel_counters_freq_hz = 125000,
.max_probe_resp_desc_thres = 24,
.tx_chain_mask = 0x3,
.rx_chain_mask = 0x3,
.max_spatial_stream = 2,
.cal_data_len = 12064,
.fw = {
.dir = QCA4019_HW_1_0_FW_DIR,
.board = QCA4019_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA4019_BOARD_DATA_SZ,
.board_ext_size = QCA4019_BOARD_EXT_DATA_SZ,
},
.sw_decrypt_mcast_mgmt = true,
.rx_desc_ops = &qca99x0_rx_desc_ops,
.hw_ops = &qca99x0_ops,
.decap_align_bytes = 1,
.spectral_bin_discard = 4,
.spectral_bin_offset = 0,
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 11,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.target_64bit = false,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
.hw_restart_disconnect = false,
.use_fw_tx_credits = true,
.delay_unmap_buffer = false,
},
{
.id = WCN3990_HW_1_0_DEV_VERSION,
.dev_id = 0,
.bus = ATH10K_BUS_SNOC,
.name = "wcn3990 hw1.0",
.continuous_frag_desc = true,
.tx_chain_mask = 0x7,
.rx_chain_mask = 0x7,
.max_spatial_stream = 4,
.fw = {
.dir = WCN3990_HW_1_0_FW_DIR,
},
.sw_decrypt_mcast_mgmt = true,
.rx_desc_ops = &wcn3990_rx_desc_ops,
.hw_ops = &wcn3990_ops,
.decap_align_bytes = 1,
.num_peers = TARGET_HL_TLV_NUM_PEERS,
.n_cipher_suites = 11,
.ast_skid_limit = TARGET_HL_TLV_AST_SKID_LIMIT,
.num_wds_entries = TARGET_HL_TLV_NUM_WDS_ENTRIES,
.target_64bit = true,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC,
.shadow_reg_support = true,
.rri_on_ddr = true,
.hw_filter_reset_required = false,
.fw_diag_ce_download = false,
.credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = true,
.hw_restart_disconnect = true,
.use_fw_tx_credits = false,
.delay_unmap_buffer = true,
},
};
static const char *const ath10k_core_fw_feature_str[] = {
[ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX] = "wmi-mgmt-rx",
[ATH10K_FW_FEATURE_WMI_10X] = "wmi-10.x",
[ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX] = "has-wmi-mgmt-tx",
[ATH10K_FW_FEATURE_NO_P2P] = "no-p2p",
[ATH10K_FW_FEATURE_WMI_10_2] = "wmi-10.2",
[ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT] = "multi-vif-ps",
[ATH10K_FW_FEATURE_WOWLAN_SUPPORT] = "wowlan",
[ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp",
[ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad",
[ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init",
[ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode",
[ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca",
[ATH10K_FW_FEATURE_MFP_SUPPORT] = "mfp",
[ATH10K_FW_FEATURE_PEER_FLOW_CONTROL] = "peer-flow-ctrl",
[ATH10K_FW_FEATURE_BTCOEX_PARAM] = "btcoex-param",
[ATH10K_FW_FEATURE_SKIP_NULL_FUNC_WAR] = "skip-null-func-war",
[ATH10K_FW_FEATURE_ALLOWS_MESH_BCAST] = "allows-mesh-bcast",
[ATH10K_FW_FEATURE_NO_PS] = "no-ps",
[ATH10K_FW_FEATURE_MGMT_TX_BY_REF] = "mgmt-tx-by-reference",
[ATH10K_FW_FEATURE_NON_BMI] = "non-bmi",
[ATH10K_FW_FEATURE_SINGLE_CHAN_INFO_PER_CHANNEL] = "single-chan-info-per-channel",
[ATH10K_FW_FEATURE_PEER_FIXED_RATE] = "peer-fixed-rate",
[ATH10K_FW_FEATURE_IRAM_RECOVERY] = "iram-recovery",
};
static unsigned int ath10k_core_get_fw_feature_str(char *buf,
size_t buf_len,
enum ath10k_fw_features feat)
{
/* make sure that ath10k_core_fw_feature_str[] gets updated */
BUILD_BUG_ON(ARRAY_SIZE(ath10k_core_fw_feature_str) !=
ATH10K_FW_FEATURE_COUNT);
if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) ||
WARN_ON(!ath10k_core_fw_feature_str[feat])) {
return scnprintf(buf, buf_len, "bit%d", feat);
}
return scnprintf(buf, buf_len, "%s", ath10k_core_fw_feature_str[feat]);
}
void ath10k_core_get_fw_features_str(struct ath10k *ar,
char *buf,
size_t buf_len)
{
size_t len = 0;
int i;
for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) {
if (test_bit(i, ar->normal_mode_fw.fw_file.fw_features)) {
if (len > 0)
len += scnprintf(buf + len, buf_len - len, ",");
len += ath10k_core_get_fw_feature_str(buf + len,
buf_len - len,
i);
}
}
}
static void ath10k_send_suspend_complete(struct ath10k *ar)
{
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n");
complete(&ar->target_suspend);
}
static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
{
bool mtu_workaround = ar->hw_params.credit_size_workaround;
int ret;
u32 param = 0;
ret = ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256);
if (ret)
return ret;
ret = ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99);
if (ret)
return ret;
ret = ath10k_bmi_read32(ar, hi_acs_flags, &param);
if (ret)
return ret;
param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
if (mode == ATH10K_FIRMWARE_MODE_NORMAL && !mtu_workaround)
param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
else
param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
if (mode == ATH10K_FIRMWARE_MODE_UTF)
param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
else
param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
ret = ath10k_bmi_write32(ar, hi_acs_flags, param);
if (ret)
return ret;
ret = ath10k_bmi_read32(ar, hi_option_flag2, &param);
if (ret)
return ret;
param |= HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_HOST;
ret = ath10k_bmi_write32(ar, hi_option_flag2, param);
if (ret)
return ret;
return 0;
}
static int ath10k_init_configure_target(struct ath10k *ar)
{
u32 param_host;
int ret;
/* tell target which HTC version it is used*/
ret = ath10k_bmi_write32(ar, hi_app_host_interest,
HTC_PROTOCOL_VERSION);
if (ret) {
ath10k_err(ar, "settings HTC version failed\n");
return ret;
}
/* set the firmware mode to STA/IBSS/AP */
ret = ath10k_bmi_read32(ar, hi_option_flag, &param_host);
if (ret) {
ath10k_err(ar, "setting firmware mode (1/2) failed\n");
return ret;
}
/* TODO following parameters need to be re-visited. */
/* num_device */
param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT);
/* Firmware mode */
/* FIXME: Why FW_MODE_AP ??.*/
param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT);
/* mac_addr_method */
param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT);
/* firmware_bridge */
param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT);
/* fwsubmode */
param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT);
ret = ath10k_bmi_write32(ar, hi_option_flag, param_host);
if (ret) {
ath10k_err(ar, "setting firmware mode (2/2) failed\n");
return ret;
}
/* We do all byte-swapping on the host */
ret = ath10k_bmi_write32(ar, hi_be, 0);
if (ret) {
ath10k_err(ar, "setting host CPU BE mode failed\n");
return ret;
}
/* FW descriptor/Data swap flags */
ret = ath10k_bmi_write32(ar, hi_fw_swap, 0);
if (ret) {
ath10k_err(ar, "setting FW data/desc swap flags failed\n");
return ret;
}
/* Some devices have a special sanity check that verifies the PCI
* Device ID is written to this host interest var. It is known to be
* required to boot QCA6164.
*/
ret = ath10k_bmi_write32(ar, hi_hci_uart_pwr_mgmt_params_ext,
ar->dev_id);
if (ret) {
ath10k_err(ar, "failed to set pwr_mgmt_params: %d\n", ret);
return ret;
}
return 0;
}
static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar,
const char *dir,
const char *file)
{
char filename[100];
const struct firmware *fw;
int ret;
if (file == NULL)
return ERR_PTR(-ENOENT);
if (dir == NULL)
dir = ".";
snprintf(filename, sizeof(filename), "%s/%s", dir, file);
ret = firmware_request_nowarn(&fw, filename, ar->dev);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n",
filename, ret);
if (ret)
return ERR_PTR(ret);
return fw;
}
static int ath10k_push_board_ext_data(struct ath10k *ar, const void *data,
size_t data_len)
{
u32 board_data_size = ar->hw_params.fw.board_size;
u32 board_ext_data_size = ar->hw_params.fw.board_ext_size;
u32 board_ext_data_addr;
int ret;
ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr);
if (ret) {
ath10k_err(ar, "could not read board ext data addr (%d)\n",
ret);
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot push board extended data addr 0x%x\n",
board_ext_data_addr);
if (board_ext_data_addr == 0)
return 0;
if (data_len != (board_data_size + board_ext_data_size)) {
ath10k_err(ar, "invalid board (ext) data sizes %zu != %d+%d\n",
data_len, board_data_size, board_ext_data_size);
return -EINVAL;
}
ret = ath10k_bmi_write_memory(ar, board_ext_data_addr,
data + board_data_size,
board_ext_data_size);
if (ret) {
ath10k_err(ar, "could not write board ext data (%d)\n", ret);
return ret;
}
ret = ath10k_bmi_write32(ar, hi_board_ext_data_config,
(board_ext_data_size << 16) | 1);
if (ret) {
ath10k_err(ar, "could not write board ext data bit (%d)\n",
ret);
return ret;
}
return 0;
}
static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
{
u32 result, address;
u8 board_id, chip_id;
bool ext_bid_support;
int ret, bmi_board_id_param;
address = ar->hw_params.patch_load_addr;
if (!ar->normal_mode_fw.fw_file.otp_data ||
!ar->normal_mode_fw.fw_file.otp_len) {
ath10k_warn(ar,
"failed to retrieve board id because of invalid otp\n");
return -ENODATA;
}
if (ar->id.bmi_ids_valid) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot already acquired valid otp board id,skip download, board_id %d chip_id %d\n",
ar->id.bmi_board_id, ar->id.bmi_chip_id);
goto skip_otp_download;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot upload otp to 0x%x len %zd for board id\n",
address, ar->normal_mode_fw.fw_file.otp_len);
ret = ath10k_bmi_fast_download(ar, address,
ar->normal_mode_fw.fw_file.otp_data,
ar->normal_mode_fw.fw_file.otp_len);
if (ret) {
ath10k_err(ar, "could not write otp for board id check: %d\n",
ret);
return ret;
}
if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE ||
ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM)
bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID;
else
bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID;
ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp for board id check: %d\n",
ret);
return ret;
}
board_id = MS(result, ATH10K_BMI_BOARD_ID_FROM_OTP);
chip_id = MS(result, ATH10K_BMI_CHIP_ID_FROM_OTP);
ext_bid_support = (result & ATH10K_BMI_EXT_BOARD_ID_SUPPORT);
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot get otp board id result 0x%08x board_id %d chip_id %d ext_bid_support %d\n",
result, board_id, chip_id, ext_bid_support);
ar->id.ext_bid_supported = ext_bid_support;
if ((result & ATH10K_BMI_BOARD_ID_STATUS_MASK) != 0 ||
(board_id == 0)) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"board id does not exist in otp, ignore it\n");
return -EOPNOTSUPP;
}
ar->id.bmi_ids_valid = true;
ar->id.bmi_board_id = board_id;
ar->id.bmi_chip_id = chip_id;
skip_otp_download:
return 0;
}
static void ath10k_core_check_bdfext(const struct dmi_header *hdr, void *data)
{
struct ath10k *ar = data;
const char *bdf_ext;
const char *magic = ATH10K_SMBIOS_BDF_EXT_MAGIC;
u8 bdf_enabled;
int i;
if (hdr->type != ATH10K_SMBIOS_BDF_EXT_TYPE)
return;
if (hdr->length != ATH10K_SMBIOS_BDF_EXT_LENGTH) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"wrong smbios bdf ext type length (%d).\n",
hdr->length);
return;
}
bdf_enabled = *((u8 *)hdr + ATH10K_SMBIOS_BDF_EXT_OFFSET);
if (!bdf_enabled) {
ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not found.\n");
return;
}
/* Only one string exists (per spec) */
bdf_ext = (char *)hdr + hdr->length;
if (memcmp(bdf_ext, magic, strlen(magic)) != 0) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"bdf variant magic does not match.\n");
return;
}
for (i = 0; i < strlen(bdf_ext); i++) {
if (!isascii(bdf_ext[i]) || !isprint(bdf_ext[i])) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"bdf variant name contains non ascii chars.\n");
return;
}
}
/* Copy extension name without magic suffix */
if (strscpy(ar->id.bdf_ext, bdf_ext + strlen(magic),
sizeof(ar->id.bdf_ext)) < 0) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"bdf variant string is longer than the buffer can accommodate (variant: %s)\n",
bdf_ext);
return;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"found and validated bdf variant smbios_type 0x%x bdf %s\n",
ATH10K_SMBIOS_BDF_EXT_TYPE, bdf_ext);
}
static int ath10k_core_check_smbios(struct ath10k *ar)
{
ar->id.bdf_ext[0] = '\0';
dmi_walk(ath10k_core_check_bdfext, ar);
if (ar->id.bdf_ext[0] == '\0')
return -ENODATA;
return 0;
}
int ath10k_core_check_dt(struct ath10k *ar)
{
struct device_node *node;
const char *variant = NULL;
node = ar->dev->of_node;
if (!node)
return -ENOENT;
of_property_read_string(node, "qcom,ath10k-calibration-variant",
&variant);
if (!variant)
return -ENODATA;
if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0)
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"bdf variant string is longer than the buffer can accommodate (variant: %s)\n",
variant);
return 0;
}
EXPORT_SYMBOL(ath10k_core_check_dt);
static int ath10k_download_fw(struct ath10k *ar)
{
u32 address, data_len;
const void *data;
int ret;
struct pm_qos_request latency_qos;
address = ar->hw_params.patch_load_addr;
data = ar->running_fw->fw_file.firmware_data;
data_len = ar->running_fw->fw_file.firmware_len;
ret = ath10k_swap_code_seg_configure(ar, &ar->running_fw->fw_file);
if (ret) {
ath10k_err(ar, "failed to configure fw code swap: %d\n",
ret);
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot uploading firmware image %pK len %d\n",
data, data_len);
/* Check if device supports to download firmware via
* diag copy engine. Downloading firmware via diag CE
* greatly reduces the time to download firmware.
*/
if (ar->hw_params.fw_diag_ce_download) {
ret = ath10k_hw_diag_fast_download(ar, address,
data, data_len);
if (ret == 0)
/* firmware upload via diag ce was successful */
return 0;
ath10k_warn(ar,
"failed to upload firmware via diag ce, trying BMI: %d",
ret);
}
memset(&latency_qos, 0, sizeof(latency_qos));
cpu_latency_qos_add_request(&latency_qos, 0);
ret = ath10k_bmi_fast_download(ar, address, data, data_len);
cpu_latency_qos_remove_request(&latency_qos);
return ret;
}
void ath10k_core_free_board_files(struct ath10k *ar)
{
if (!IS_ERR(ar->normal_mode_fw.board))
release_firmware(ar->normal_mode_fw.board);
if (!IS_ERR(ar->normal_mode_fw.ext_board))
release_firmware(ar->normal_mode_fw.ext_board);
ar->normal_mode_fw.board = NULL;
ar->normal_mode_fw.board_data = NULL;
ar->normal_mode_fw.board_len = 0;
ar->normal_mode_fw.ext_board = NULL;
ar->normal_mode_fw.ext_board_data = NULL;
ar->normal_mode_fw.ext_board_len = 0;
}
EXPORT_SYMBOL(ath10k_core_free_board_files);
static void ath10k_core_free_firmware_files(struct ath10k *ar)
{
if (!IS_ERR(ar->normal_mode_fw.fw_file.firmware))
release_firmware(ar->normal_mode_fw.fw_file.firmware);
if (!IS_ERR(ar->cal_file))
release_firmware(ar->cal_file);
if (!IS_ERR(ar->pre_cal_file))
release_firmware(ar->pre_cal_file);
ath10k_swap_code_seg_release(ar, &ar->normal_mode_fw.fw_file);
ar->normal_mode_fw.fw_file.otp_data = NULL;
ar->normal_mode_fw.fw_file.otp_len = 0;
ar->normal_mode_fw.fw_file.firmware = NULL;
ar->normal_mode_fw.fw_file.firmware_data = NULL;
ar->normal_mode_fw.fw_file.firmware_len = 0;
ar->cal_file = NULL;
ar->pre_cal_file = NULL;
}
static int ath10k_fetch_cal_file(struct ath10k *ar)
{
char filename[100];
/* pre-cal-<bus>-<id>.bin */
scnprintf(filename, sizeof(filename), "pre-cal-%s-%s.bin",
ath10k_bus_str(ar->hif.bus), dev_name(ar->dev));
ar->pre_cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename);
if (!IS_ERR(ar->pre_cal_file))
goto success;
/* cal-<bus>-<id>.bin */
scnprintf(filename, sizeof(filename), "cal-%s-%s.bin",
ath10k_bus_str(ar->hif.bus), dev_name(ar->dev));
ar->cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename);
if (IS_ERR(ar->cal_file))
/* calibration file is optional, don't print any warnings */
return PTR_ERR(ar->cal_file);
success:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "found calibration file %s/%s\n",
ATH10K_FW_DIR, filename);
return 0;
}
static int ath10k_core_fetch_board_data_api_1(struct ath10k *ar, int bd_ie_type)
{
const struct firmware *fw;
char boardname[100];
if (bd_ie_type == ATH10K_BD_IE_BOARD) {
if (!ar->hw_params.fw.board) {
ath10k_err(ar, "failed to find board file fw entry\n");
return -EINVAL;
}
scnprintf(boardname, sizeof(boardname), "board-%s-%s.bin",
ath10k_bus_str(ar->hif.bus), dev_name(ar->dev));
ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar,
ar->hw_params.fw.dir,
boardname);
if (IS_ERR(ar->normal_mode_fw.board)) {
fw = ath10k_fetch_fw_file(ar,
ar->hw_params.fw.dir,
ar->hw_params.fw.board);
ar->normal_mode_fw.board = fw;
}
if (IS_ERR(ar->normal_mode_fw.board))
return PTR_ERR(ar->normal_mode_fw.board);
ar->normal_mode_fw.board_data = ar->normal_mode_fw.board->data;
ar->normal_mode_fw.board_len = ar->normal_mode_fw.board->size;
} else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) {
if (!ar->hw_params.fw.eboard) {
ath10k_err(ar, "failed to find eboard file fw entry\n");
return -EINVAL;
}
fw = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir,
ar->hw_params.fw.eboard);
ar->normal_mode_fw.ext_board = fw;
if (IS_ERR(ar->normal_mode_fw.ext_board))
return PTR_ERR(ar->normal_mode_fw.ext_board);
ar->normal_mode_fw.ext_board_data = ar->normal_mode_fw.ext_board->data;
ar->normal_mode_fw.ext_board_len = ar->normal_mode_fw.ext_board->size;
}
return 0;
}
static int ath10k_core_parse_bd_ie_board(struct ath10k *ar,
const void *buf, size_t buf_len,
const char *boardname,
int bd_ie_type)
{
const struct ath10k_fw_ie *hdr;
bool name_match_found;
int ret, board_ie_id;
size_t board_ie_len;
const void *board_ie_data;
name_match_found = false;
/* go through ATH10K_BD_IE_BOARD_ elements */
while (buf_len > sizeof(struct ath10k_fw_ie)) {
hdr = buf;
board_ie_id = le32_to_cpu(hdr->id);
board_ie_len = le32_to_cpu(hdr->len);
board_ie_data = hdr->data;
buf_len -= sizeof(*hdr);
buf += sizeof(*hdr);
if (buf_len < ALIGN(board_ie_len, 4)) {
ath10k_err(ar, "invalid ATH10K_BD_IE_BOARD length: %zu < %zu\n",
buf_len, ALIGN(board_ie_len, 4));
ret = -EINVAL;
goto out;
}
switch (board_ie_id) {
case ATH10K_BD_IE_BOARD_NAME:
ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "board name", "",
board_ie_data, board_ie_len);
if (board_ie_len != strlen(boardname))
break;
ret = memcmp(board_ie_data, boardname, strlen(boardname));
if (ret)
break;
name_match_found = true;
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot found match for name '%s'",
boardname);
break;
case ATH10K_BD_IE_BOARD_DATA:
if (!name_match_found)
/* no match found */
break;
if (bd_ie_type == ATH10K_BD_IE_BOARD) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot found board data for '%s'",
boardname);
ar->normal_mode_fw.board_data = board_ie_data;
ar->normal_mode_fw.board_len = board_ie_len;
} else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot found eboard data for '%s'",
boardname);
ar->normal_mode_fw.ext_board_data = board_ie_data;
ar->normal_mode_fw.ext_board_len = board_ie_len;
}
ret = 0;
goto out;
default:
ath10k_warn(ar, "unknown ATH10K_BD_IE_BOARD found: %d\n",
board_ie_id);
break;
}
/* jump over the padding */
board_ie_len = ALIGN(board_ie_len, 4);
buf_len -= board_ie_len;
buf += board_ie_len;
}
/* no match found */
ret = -ENOENT;
out:
return ret;
}
static int ath10k_core_search_bd(struct ath10k *ar,
const char *boardname,
const u8 *data,
size_t len)
{
size_t ie_len;
struct ath10k_fw_ie *hdr;
int ret = -ENOENT, ie_id;
while (len > sizeof(struct ath10k_fw_ie)) {
hdr = (struct ath10k_fw_ie *)data;
ie_id = le32_to_cpu(hdr->id);
ie_len = le32_to_cpu(hdr->len);
len -= sizeof(*hdr);
data = hdr->data;
if (len < ALIGN(ie_len, 4)) {
ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n",
ie_id, ie_len, len);
return -EINVAL;
}
switch (ie_id) {
case ATH10K_BD_IE_BOARD:
ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len,
boardname,
ATH10K_BD_IE_BOARD);
if (ret == -ENOENT)
/* no match found, continue */
break;
/* either found or error, so stop searching */
goto out;
case ATH10K_BD_IE_BOARD_EXT:
ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len,
boardname,
ATH10K_BD_IE_BOARD_EXT);
if (ret == -ENOENT)
/* no match found, continue */
break;
/* either found or error, so stop searching */
goto out;
}
/* jump over the padding */
ie_len = ALIGN(ie_len, 4);
len -= ie_len;
data += ie_len;
}
out:
/* return result of parse_bd_ie_board() or -ENOENT */
return ret;
}
static int ath10k_core_fetch_board_data_api_n(struct ath10k *ar,
const char *boardname,
const char *fallback_boardname1,
const char *fallback_boardname2,
const char *filename)
{
size_t len, magic_len;
const u8 *data;
int ret;
/* Skip if already fetched during board data download */
if (!ar->normal_mode_fw.board)
ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar,
ar->hw_params.fw.dir,
filename);
if (IS_ERR(ar->normal_mode_fw.board))
return PTR_ERR(ar->normal_mode_fw.board);
data = ar->normal_mode_fw.board->data;
len = ar->normal_mode_fw.board->size;
/* magic has extra null byte padded */
magic_len = strlen(ATH10K_BOARD_MAGIC) + 1;
if (len < magic_len) {
ath10k_err(ar, "failed to find magic value in %s/%s, file too short: %zu\n",
ar->hw_params.fw.dir, filename, len);
ret = -EINVAL;
goto err;
}
if (memcmp(data, ATH10K_BOARD_MAGIC, magic_len)) {
ath10k_err(ar, "found invalid board magic\n");
ret = -EINVAL;
goto err;
}
/* magic is padded to 4 bytes */
magic_len = ALIGN(magic_len, 4);
if (len < magic_len) {
ath10k_err(ar, "failed: %s/%s too small to contain board data, len: %zu\n",
ar->hw_params.fw.dir, filename, len);
ret = -EINVAL;
goto err;
}
data += magic_len;
len -= magic_len;
/* attempt to find boardname in the IE list */
ret = ath10k_core_search_bd(ar, boardname, data, len);
/* if we didn't find it and have a fallback name, try that */
if (ret == -ENOENT && fallback_boardname1)
ret = ath10k_core_search_bd(ar, fallback_boardname1, data, len);
if (ret == -ENOENT && fallback_boardname2)
ret = ath10k_core_search_bd(ar, fallback_boardname2, data, len);
if (ret == -ENOENT) {
ath10k_err(ar,
"failed to fetch board data for %s from %s/%s\n",
boardname, ar->hw_params.fw.dir, filename);
ret = -ENODATA;
}
if (ret)
goto err;
return 0;
err:
ath10k_core_free_board_files(ar);
return ret;
}
static int ath10k_core_create_board_name(struct ath10k *ar, char *name,
size_t name_len, bool with_variant,
bool with_chip_id)
{
/* strlen(',variant=') + strlen(ar->id.bdf_ext) */
char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 };
if (with_variant && ar->id.bdf_ext[0] != '\0')
scnprintf(variant, sizeof(variant), ",variant=%s",
ar->id.bdf_ext);
if (ar->id.bmi_ids_valid) {
scnprintf(name, name_len,
"bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s",
ath10k_bus_str(ar->hif.bus),
ar->id.bmi_chip_id,
ar->id.bmi_board_id, variant);
goto out;
}
if (ar->id.qmi_ids_valid) {
if (with_chip_id)
scnprintf(name, name_len,
"bus=%s,qmi-board-id=%x,qmi-chip-id=%x%s",
ath10k_bus_str(ar->hif.bus),
ar->id.qmi_board_id, ar->id.qmi_chip_id,
variant);
else
scnprintf(name, name_len,
"bus=%s,qmi-board-id=%x",
ath10k_bus_str(ar->hif.bus),
ar->id.qmi_board_id);
goto out;
}
scnprintf(name, name_len,
"bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s",
ath10k_bus_str(ar->hif.bus),
ar->id.vendor, ar->id.device,
ar->id.subsystem_vendor, ar->id.subsystem_device, variant);
out:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using board name '%s'\n", name);
return 0;
}
static int ath10k_core_create_eboard_name(struct ath10k *ar, char *name,
size_t name_len)
{
if (ar->id.bmi_ids_valid) {
scnprintf(name, name_len,
"bus=%s,bmi-chip-id=%d,bmi-eboard-id=%d",
ath10k_bus_str(ar->hif.bus),
ar->id.bmi_chip_id,
ar->id.bmi_eboard_id);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using eboard name '%s'\n", name);
return 0;
}
/* Fallback if returned board id is zero */
return -1;
}
int ath10k_core_fetch_board_file(struct ath10k *ar, int bd_ie_type)
{
char boardname[100], fallback_boardname1[100], fallback_boardname2[100];
int ret;
if (bd_ie_type == ATH10K_BD_IE_BOARD) {
/* With variant and chip id */
ret = ath10k_core_create_board_name(ar, boardname,
sizeof(boardname), true,
true);
if (ret) {
ath10k_err(ar, "failed to create board name: %d", ret);
return ret;
}
/* Without variant and only chip-id */
ret = ath10k_core_create_board_name(ar, fallback_boardname1,
sizeof(boardname), false,
true);
if (ret) {
ath10k_err(ar, "failed to create 1st fallback board name: %d",
ret);
return ret;
}
/* Without variant and without chip-id */
ret = ath10k_core_create_board_name(ar, fallback_boardname2,
sizeof(boardname), false,
false);
if (ret) {
ath10k_err(ar, "failed to create 2nd fallback board name: %d",
ret);
return ret;
}
} else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) {
ret = ath10k_core_create_eboard_name(ar, boardname,
sizeof(boardname));
if (ret) {
ath10k_err(ar, "fallback to eboard.bin since board id 0");
goto fallback;
}
}
ar->bd_api = 2;
ret = ath10k_core_fetch_board_data_api_n(ar, boardname,
fallback_boardname1,
fallback_boardname2,
ATH10K_BOARD_API2_FILE);
if (!ret)
goto success;
fallback:
ar->bd_api = 1;
ret = ath10k_core_fetch_board_data_api_1(ar, bd_ie_type);
if (ret) {
ath10k_err(ar, "failed to fetch board-2.bin or board.bin from %s\n",
ar->hw_params.fw.dir);
return ret;
}
success:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "using board api %d\n", ar->bd_api);
return 0;
}
EXPORT_SYMBOL(ath10k_core_fetch_board_file);
static int ath10k_core_get_ext_board_id_from_otp(struct ath10k *ar)
{
u32 result, address;
u8 ext_board_id;
int ret;
address = ar->hw_params.patch_load_addr;
if (!ar->normal_mode_fw.fw_file.otp_data ||
!ar->normal_mode_fw.fw_file.otp_len) {
ath10k_warn(ar,
"failed to retrieve extended board id due to otp binary missing\n");
return -ENODATA;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot upload otp to 0x%x len %zd for ext board id\n",
address, ar->normal_mode_fw.fw_file.otp_len);
ret = ath10k_bmi_fast_download(ar, address,
ar->normal_mode_fw.fw_file.otp_data,
ar->normal_mode_fw.fw_file.otp_len);
if (ret) {
ath10k_err(ar, "could not write otp for ext board id check: %d\n",
ret);
return ret;
}
ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EXT_BOARD_ID, &result);
if (ret) {
ath10k_err(ar, "could not execute otp for ext board id check: %d\n",
ret);
return ret;
}
if (!result) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"ext board id does not exist in otp, ignore it\n");
return -EOPNOTSUPP;
}
ext_board_id = result & ATH10K_BMI_EBOARD_ID_STATUS_MASK;
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot get otp ext board id result 0x%08x ext_board_id %d\n",
result, ext_board_id);
ar->id.bmi_eboard_id = ext_board_id;
return 0;
}
static int ath10k_download_board_data(struct ath10k *ar, const void *data,
size_t data_len)
{
u32 board_data_size = ar->hw_params.fw.board_size;
u32 eboard_data_size = ar->hw_params.fw.ext_board_size;
u32 board_address;
u32 ext_board_address;
int ret;
ret = ath10k_push_board_ext_data(ar, data, data_len);
if (ret) {
ath10k_err(ar, "could not push board ext data (%d)\n", ret);
goto exit;
}
ret = ath10k_bmi_read32(ar, hi_board_data, &board_address);
if (ret) {
ath10k_err(ar, "could not read board data addr (%d)\n", ret);
goto exit;
}
ret = ath10k_bmi_write_memory(ar, board_address, data,
min_t(u32, board_data_size,
data_len));
if (ret) {
ath10k_err(ar, "could not write board data (%d)\n", ret);
goto exit;
}
ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1);
if (ret) {
ath10k_err(ar, "could not write board data bit (%d)\n", ret);
goto exit;
}
if (!ar->id.ext_bid_supported)
goto exit;
/* Extended board data download */
ret = ath10k_core_get_ext_board_id_from_otp(ar);
if (ret == -EOPNOTSUPP) {
/* Not fetching ext_board_data if ext board id is 0 */
ath10k_dbg(ar, ATH10K_DBG_BOOT, "otp returned ext board id 0\n");
return 0;
} else if (ret) {
ath10k_err(ar, "failed to get extended board id: %d\n", ret);
goto exit;
}
ret = ath10k_core_fetch_board_file(ar, ATH10K_BD_IE_BOARD_EXT);
if (ret)
goto exit;
if (ar->normal_mode_fw.ext_board_data) {
ext_board_address = board_address + EXT_BOARD_ADDRESS_OFFSET;
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot writing ext board data to addr 0x%x",
ext_board_address);
ret = ath10k_bmi_write_memory(ar, ext_board_address,
ar->normal_mode_fw.ext_board_data,
min_t(u32, eboard_data_size, data_len));
if (ret)
ath10k_err(ar, "failed to write ext board data: %d\n", ret);
}
exit:
return ret;
}
static int ath10k_download_and_run_otp(struct ath10k *ar)
{
u32 result, address = ar->hw_params.patch_load_addr;
u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param;
int ret;
ret = ath10k_download_board_data(ar,
ar->running_fw->board_data,
ar->running_fw->board_len);
if (ret) {
ath10k_err(ar, "failed to download board data: %d\n", ret);
return ret;
}
/* OTP is optional */
if (!ar->running_fw->fw_file.otp_data ||
!ar->running_fw->fw_file.otp_len) {
ath10k_warn(ar, "Not running otp, calibration will be incorrect (otp-data %pK otp_len %zd)!\n",
ar->running_fw->fw_file.otp_data,
ar->running_fw->fw_file.otp_len);
return 0;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n",
address, ar->running_fw->fw_file.otp_len);
ret = ath10k_bmi_fast_download(ar, address,
ar->running_fw->fw_file.otp_data,
ar->running_fw->fw_file.otp_len);
if (ret) {
ath10k_err(ar, "could not write otp (%d)\n", ret);
return ret;
}
/* As of now pre-cal is valid for 10_4 variants */
if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE ||
ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM)
bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL;
ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp (%d)\n", ret);
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
if (!(skip_otp || test_bit(ATH10K_FW_FEATURE_IGNORE_OTP_RESULT,
ar->running_fw->fw_file.fw_features)) &&
result != 0) {
ath10k_err(ar, "otp calibration failed: %d", result);
return -EINVAL;
}
return 0;
}
static int ath10k_download_cal_file(struct ath10k *ar,
const struct firmware *file)
{
int ret;
if (!file)
return -ENOENT;
if (IS_ERR(file))
return PTR_ERR(file);
ret = ath10k_download_board_data(ar, file->data, file->size);
if (ret) {
ath10k_err(ar, "failed to download cal_file data: %d\n", ret);
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cal file downloaded\n");
return 0;
}
static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name)
{
struct device_node *node;
int data_len;
void *data;
int ret;
node = ar->dev->of_node;
if (!node)
/* Device Tree is optional, don't print any warnings if
* there's no node for ath10k.
*/
return -ENOENT;
if (!of_get_property(node, dt_name, &data_len)) {
/* The calibration data node is optional */
return -ENOENT;
}
if (data_len != ar->hw_params.cal_data_len) {
ath10k_warn(ar, "invalid calibration data length in DT: %d\n",
data_len);
ret = -EMSGSIZE;
goto out;
}
data = kmalloc(data_len, GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
goto out;
}
ret = of_property_read_u8_array(node, dt_name, data, data_len);
if (ret) {
ath10k_warn(ar, "failed to read calibration data from DT: %d\n",
ret);
goto out_free;
}
ret = ath10k_download_board_data(ar, data, data_len);
if (ret) {
ath10k_warn(ar, "failed to download calibration data from Device Tree: %d\n",
ret);
goto out_free;
}
ret = 0;
out_free:
kfree(data);
out:
return ret;
}
static int ath10k_download_cal_eeprom(struct ath10k *ar)
{
size_t data_len;
void *data = NULL;
int ret;
ret = ath10k_hif_fetch_cal_eeprom(ar, &data, &data_len);
if (ret) {
if (ret != -EOPNOTSUPP)
ath10k_warn(ar, "failed to read calibration data from EEPROM: %d\n",
ret);
goto out_free;
}
ret = ath10k_download_board_data(ar, data, data_len);
if (ret) {
ath10k_warn(ar, "failed to download calibration data from EEPROM: %d\n",
ret);
goto out_free;
}
ret = 0;
out_free:
kfree(data);
return ret;
}
static int ath10k_download_cal_nvmem(struct ath10k *ar, const char *cell_name)
{
struct nvmem_cell *cell;
void *buf;
size_t len;
int ret;
cell = devm_nvmem_cell_get(ar->dev, cell_name);
if (IS_ERR(cell)) {
ret = PTR_ERR(cell);
return ret;
}
buf = nvmem_cell_read(cell, &len);
if (IS_ERR(buf))
return PTR_ERR(buf);
if (ar->hw_params.cal_data_len != len) {
kfree(buf);
ath10k_warn(ar, "invalid calibration data length in nvmem-cell '%s': %zu != %u\n",
cell_name, len, ar->hw_params.cal_data_len);
return -EMSGSIZE;
}
ret = ath10k_download_board_data(ar, buf, len);
kfree(buf);
if (ret)
ath10k_warn(ar, "failed to download calibration data from nvmem-cell '%s': %d\n",
cell_name, ret);
return ret;
}
int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name,
struct ath10k_fw_file *fw_file)
{
size_t magic_len, len, ie_len;
int ie_id, i, index, bit, ret;
struct ath10k_fw_ie *hdr;
const u8 *data;
__le32 *timestamp, *version;
/* first fetch the firmware file (firmware-*.bin) */
fw_file->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir,
name);
if (IS_ERR(fw_file->firmware))
return PTR_ERR(fw_file->firmware);
data = fw_file->firmware->data;
len = fw_file->firmware->size;
/* magic also includes the null byte, check that as well */
magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1;
if (len < magic_len) {
ath10k_err(ar, "firmware file '%s/%s' too small to contain magic: %zu\n",
ar->hw_params.fw.dir, name, len);
ret = -EINVAL;
goto err;
}
if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) {
ath10k_err(ar, "invalid firmware magic\n");
ret = -EINVAL;
goto err;
}
/* jump over the padding */
magic_len = ALIGN(magic_len, 4);
len -= magic_len;
data += magic_len;
/* loop elements */
while (len > sizeof(struct ath10k_fw_ie)) {
hdr = (struct ath10k_fw_ie *)data;
ie_id = le32_to_cpu(hdr->id);
ie_len = le32_to_cpu(hdr->len);
len -= sizeof(*hdr);
data += sizeof(*hdr);
if (len < ie_len) {
ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n",
ie_id, len, ie_len);
ret = -EINVAL;
goto err;
}
switch (ie_id) {
case ATH10K_FW_IE_FW_VERSION:
if (ie_len > sizeof(fw_file->fw_version) - 1)
break;
memcpy(fw_file->fw_version, data, ie_len);
fw_file->fw_version[ie_len] = '\0';
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"found fw version %s\n",
fw_file->fw_version);
break;
case ATH10K_FW_IE_TIMESTAMP:
if (ie_len != sizeof(u32))
break;
timestamp = (__le32 *)data;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw timestamp %d\n",
le32_to_cpup(timestamp));
break;
case ATH10K_FW_IE_FEATURES:
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"found firmware features ie (%zd B)\n",
ie_len);
for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) {
index = i / 8;
bit = i % 8;
if (index == ie_len)
break;
if (data[index] & (1 << bit)) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"Enabling feature bit: %i\n",
i);
__set_bit(i, fw_file->fw_features);
}
}
ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "",
fw_file->fw_features,
sizeof(fw_file->fw_features));
break;
case ATH10K_FW_IE_FW_IMAGE:
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"found fw image ie (%zd B)\n",
ie_len);
fw_file->firmware_data = data;
fw_file->firmware_len = ie_len;
break;
case ATH10K_FW_IE_OTP_IMAGE:
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"found otp image ie (%zd B)\n",
ie_len);
fw_file->otp_data = data;
fw_file->otp_len = ie_len;
break;
case ATH10K_FW_IE_WMI_OP_VERSION:
if (ie_len != sizeof(u32))
break;
version = (__le32 *)data;
fw_file->wmi_op_version = le32_to_cpup(version);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie wmi op version %d\n",
fw_file->wmi_op_version);
break;
case ATH10K_FW_IE_HTT_OP_VERSION:
if (ie_len != sizeof(u32))
break;
version = (__le32 *)data;
fw_file->htt_op_version = le32_to_cpup(version);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n",
fw_file->htt_op_version);
break;
case ATH10K_FW_IE_FW_CODE_SWAP_IMAGE:
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"found fw code swap image ie (%zd B)\n",
ie_len);
fw_file->codeswap_data = data;
fw_file->codeswap_len = ie_len;
break;
default:
ath10k_warn(ar, "Unknown FW IE: %u\n",
le32_to_cpu(hdr->id));
break;
}
/* jump over the padding */
ie_len = ALIGN(ie_len, 4);
len -= ie_len;
data += ie_len;
}
if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, fw_file->fw_features) &&
(!fw_file->firmware_data || !fw_file->firmware_len)) {
ath10k_warn(ar, "No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n",
ar->hw_params.fw.dir, name);
ret = -ENOMEDIUM;
goto err;
}
return 0;
err:
ath10k_core_free_firmware_files(ar);
return ret;
}
static void ath10k_core_get_fw_name(struct ath10k *ar, char *fw_name,
size_t fw_name_len, int fw_api)
{
switch (ar->hif.bus) {
case ATH10K_BUS_SDIO:
case ATH10K_BUS_USB:
scnprintf(fw_name, fw_name_len, "%s-%s-%d.bin",
ATH10K_FW_FILE_BASE, ath10k_bus_str(ar->hif.bus),
fw_api);
break;
case ATH10K_BUS_PCI:
case ATH10K_BUS_AHB:
case ATH10K_BUS_SNOC:
scnprintf(fw_name, fw_name_len, "%s-%d.bin",
ATH10K_FW_FILE_BASE, fw_api);
break;
}
}
static int ath10k_core_fetch_firmware_files(struct ath10k *ar)
{
int ret, i;
char fw_name[100];
/* calibration file is optional, don't check for any errors */
ath10k_fetch_cal_file(ar);
for (i = ATH10K_FW_API_MAX; i >= ATH10K_FW_API_MIN; i--) {
ar->fw_api = i;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n",
ar->fw_api);
ath10k_core_get_fw_name(ar, fw_name, sizeof(fw_name), ar->fw_api);
ret = ath10k_core_fetch_firmware_api_n(ar, fw_name,
&ar->normal_mode_fw.fw_file);
if (!ret)
goto success;
}
/* we end up here if we couldn't fetch any firmware */
ath10k_err(ar, "Failed to find firmware-N.bin (N between %d and %d) from %s: %d",
ATH10K_FW_API_MIN, ATH10K_FW_API_MAX, ar->hw_params.fw.dir,
ret);
return ret;
success:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api);
return 0;
}
static int ath10k_core_pre_cal_download(struct ath10k *ar)
{
int ret;
ret = ath10k_download_cal_nvmem(ar, "pre-calibration");
if (ret == 0) {
ar->cal_mode = ATH10K_PRE_CAL_MODE_NVMEM;
goto success;
} else if (ret == -EPROBE_DEFER) {
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot did not find a pre-calibration nvmem-cell, try file next: %d\n",
ret);
ret = ath10k_download_cal_file(ar, ar->pre_cal_file);
if (ret == 0) {
ar->cal_mode = ATH10K_PRE_CAL_MODE_FILE;
goto success;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot did not find a pre calibration file, try DT next: %d\n",
ret);
ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data");
if (ret) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"unable to load pre cal data from DT: %d\n", ret);
return ret;
}
ar->cal_mode = ATH10K_PRE_CAL_MODE_DT;
success:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n",
ath10k_cal_mode_str(ar->cal_mode));
return 0;
}
static int ath10k_core_pre_cal_config(struct ath10k *ar)
{
int ret;
ret = ath10k_core_pre_cal_download(ar);
if (ret) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"failed to load pre cal data: %d\n", ret);
return ret;
}
ret = ath10k_core_get_board_id_from_otp(ar);
if (ret) {
ath10k_err(ar, "failed to get board id: %d\n", ret);
return ret;
}
ret = ath10k_download_and_run_otp(ar);
if (ret) {
ath10k_err(ar, "failed to run otp: %d\n", ret);
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"pre cal configuration done successfully\n");
return 0;
}
static int ath10k_download_cal_data(struct ath10k *ar)
{
int ret;
ret = ath10k_core_pre_cal_config(ar);
if (ret == 0)
return 0;
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"pre cal download procedure failed, try cal file: %d\n",
ret);
ret = ath10k_download_cal_nvmem(ar, "calibration");
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_NVMEM;
goto done;
} else if (ret == -EPROBE_DEFER) {
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot did not find a calibration nvmem-cell, try file next: %d\n",
ret);
ret = ath10k_download_cal_file(ar, ar->cal_file);
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_FILE;
goto done;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot did not find a calibration file, try DT next: %d\n",
ret);
ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data");
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_DT;
goto done;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot did not find DT entry, try target EEPROM next: %d\n",
ret);
ret = ath10k_download_cal_eeprom(ar);
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_EEPROM;
goto done;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot did not find target EEPROM entry, try OTP next: %d\n",
ret);
ret = ath10k_download_and_run_otp(ar);
if (ret) {
ath10k_err(ar, "failed to run otp: %d\n", ret);
return ret;
}
ar->cal_mode = ATH10K_CAL_MODE_OTP;
done:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n",
ath10k_cal_mode_str(ar->cal_mode));
return 0;
}
static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar)
{
struct device_node *node;
u8 coex_support = 0;
int ret;
node = ar->dev->of_node;
if (!node)
goto out;
ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support);
if (ret) {
ar->coex_support = true;
goto out;
}
if (coex_support) {
ar->coex_support = true;
} else {
ar->coex_support = false;
ar->coex_gpio_pin = -1;
goto out;
}
ret = of_property_read_u32(node, "qcom,coexist-gpio-pin",
&ar->coex_gpio_pin);
if (ret)
ar->coex_gpio_pin = -1;
out:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n",
ar->coex_support, ar->coex_gpio_pin);
}
static int ath10k_init_uart(struct ath10k *ar)
{
int ret;
/*
* Explicitly setting UART prints to zero as target turns it on
* based on scratch registers.
*/
ret = ath10k_bmi_write32(ar, hi_serial_enable, 0);
if (ret) {
ath10k_warn(ar, "could not disable UART prints (%d)\n", ret);
return ret;
}
if (!uart_print) {
if (ar->hw_params.uart_pin_workaround) {
ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin,
ar->hw_params.uart_pin);
if (ret) {
ath10k_warn(ar, "failed to set UART TX pin: %d",
ret);
return ret;
}
}
return 0;
}
ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ar->hw_params.uart_pin);
if (ret) {
ath10k_warn(ar, "could not enable UART prints (%d)\n", ret);
return ret;
}
ret = ath10k_bmi_write32(ar, hi_serial_enable, 1);
if (ret) {
ath10k_warn(ar, "could not enable UART prints (%d)\n", ret);
return ret;
}
/* Set the UART baud rate to 19200. */
ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200);
if (ret) {
ath10k_warn(ar, "could not set the baud rate (%d)\n", ret);
return ret;
}
ath10k_info(ar, "UART prints enabled\n");
return 0;
}
static int ath10k_init_hw_params(struct ath10k *ar)
{
const struct ath10k_hw_params *hw_params;
int i;
for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) {
hw_params = &ath10k_hw_params_list[i];
if (hw_params->bus == ar->hif.bus &&
hw_params->id == ar->target_version &&
hw_params->dev_id == ar->dev_id)
break;
}
if (i == ARRAY_SIZE(ath10k_hw_params_list)) {
ath10k_err(ar, "Unsupported hardware version: 0x%x\n",
ar->target_version);
return -EINVAL;
}
ar->hw_params = *hw_params;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n",
ar->hw_params.name, ar->target_version);
return 0;
}
void ath10k_core_start_recovery(struct ath10k *ar)
{
if (test_and_set_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags)) {
ath10k_warn(ar, "already restarting\n");
return;
}
queue_work(ar->workqueue, &ar->restart_work);
}
EXPORT_SYMBOL(ath10k_core_start_recovery);
void ath10k_core_napi_enable(struct ath10k *ar)
{
lockdep_assert_held(&ar->conf_mutex);
if (test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags))
return;
napi_enable(&ar->napi);
set_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags);
}
EXPORT_SYMBOL(ath10k_core_napi_enable);
void ath10k_core_napi_sync_disable(struct ath10k *ar)
{
lockdep_assert_held(&ar->conf_mutex);
if (!test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags))
return;
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
clear_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags);
}
EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
static void ath10k_core_restart(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k, restart_work);
struct ath10k_vif *arvif;
int ret;
set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
/* Place a barrier to make sure the compiler doesn't reorder
* CRASH_FLUSH and calling other functions.
*/
barrier();
ieee80211_stop_queues(ar->hw);
ath10k_drain_tx(ar);
complete(&ar->scan.started);
complete(&ar->scan.completed);
complete(&ar->scan.on_channel);
complete(&ar->offchan_tx_completed);
complete(&ar->install_key_done);
complete(&ar->vdev_setup_done);
complete(&ar->vdev_delete_done);
complete(&ar->thermal.wmi_sync);
complete(&ar->bss_survey_done);
wake_up(&ar->htt.empty_tx_wq);
wake_up(&ar->wmi.tx_credits_wq);
wake_up(&ar->peer_mapping_wq);
/* TODO: We can have one instance of cancelling coverage_class_work by
* moving it to ath10k_halt(), so that both stop() and restart() would
* call that but it takes conf_mutex() and if we call cancel_work_sync()
* with conf_mutex it will deadlock.
*/
cancel_work_sync(&ar->set_coverage_class_work);
mutex_lock(&ar->conf_mutex);
switch (ar->state) {
case ATH10K_STATE_ON:
ar->state = ATH10K_STATE_RESTARTING;
ath10k_halt(ar);
ath10k_scan_finish(ar);
if (ar->hw_params.hw_restart_disconnect) {
list_for_each_entry(arvif, &ar->arvifs, list) {
if (arvif->is_up &&
arvif->vdev_type == WMI_VDEV_TYPE_STA)
ieee80211_hw_restart_disconnect(arvif->vif);
}
}
ieee80211_restart_hw(ar->hw);
break;
case ATH10K_STATE_OFF:
/* this can happen if driver is being unloaded
* or if the crash happens during FW probing
*/
ath10k_warn(ar, "cannot restart a device that hasn't been started\n");
break;
case ATH10K_STATE_RESTARTING:
/* hw restart might be requested from multiple places */
break;
case ATH10K_STATE_RESTARTED:
ar->state = ATH10K_STATE_WEDGED;
fallthrough;
case ATH10K_STATE_WEDGED:
ath10k_warn(ar, "device is wedged, will not restart\n");
break;
case ATH10K_STATE_UTF:
ath10k_warn(ar, "firmware restart in UTF mode not supported\n");
break;
}
mutex_unlock(&ar->conf_mutex);
ret = ath10k_coredump_submit(ar);
if (ret)
ath10k_warn(ar, "failed to send firmware crash dump via devcoredump: %d",
ret);
complete(&ar->driver_recovery);
}
static void ath10k_core_set_coverage_class_work(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k,
set_coverage_class_work);
if (ar->hw_params.hw_ops->set_coverage_class)
ar->hw_params.hw_ops->set_coverage_class(ar, -1);
}
static int ath10k_core_init_firmware_features(struct ath10k *ar)
{
struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file;
int max_num_peers;
if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, fw_file->fw_features) &&
!test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) {
ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well");
return -EINVAL;
}
if (fw_file->wmi_op_version >= ATH10K_FW_WMI_OP_VERSION_MAX) {
ath10k_err(ar, "unsupported WMI OP version (max %d): %d\n",
ATH10K_FW_WMI_OP_VERSION_MAX, fw_file->wmi_op_version);
return -EINVAL;
}
ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_NATIVE_WIFI;
switch (ath10k_cryptmode_param) {
case ATH10K_CRYPT_MODE_HW:
clear_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
clear_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags);
break;
case ATH10K_CRYPT_MODE_SW:
if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
fw_file->fw_features)) {
ath10k_err(ar, "cryptmode > 0 requires raw mode support from firmware");
return -EINVAL;
}
set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
set_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags);
break;
default:
ath10k_info(ar, "invalid cryptmode: %d\n",
ath10k_cryptmode_param);
return -EINVAL;
}
ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT;
ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT;
if (ath10k_frame_mode == ATH10K_HW_TXRX_RAW) {
if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
fw_file->fw_features)) {
ath10k_err(ar, "rawmode = 1 requires support from firmware");
return -EINVAL;
}
set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
}
if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_RAW;
/* Workaround:
*
* Firmware A-MSDU aggregation breaks with RAW Tx encap mode
* and causes enormous performance issues (malformed frames,
* etc).
*
* Disabling A-MSDU makes RAW mode stable with heavy traffic
* albeit a bit slower compared to regular operation.
*/
ar->htt.max_num_amsdu = 1;
}
/* Backwards compatibility for firmwares without
* ATH10K_FW_IE_WMI_OP_VERSION.
*/
if (fw_file->wmi_op_version == ATH10K_FW_WMI_OP_VERSION_UNSET) {
if (test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) {
if (test_bit(ATH10K_FW_FEATURE_WMI_10_2,
fw_file->fw_features))
fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_2;
else
fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
} else {
fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_MAIN;
}
}
switch (fw_file->wmi_op_version) {
case ATH10K_FW_WMI_OP_VERSION_MAIN:
max_num_peers = TARGET_NUM_PEERS;
ar->max_num_stations = TARGET_NUM_STATIONS;
ar->max_num_vdevs = TARGET_NUM_VDEVS;
ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC;
ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
WMI_STAT_PEER;
ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
break;
case ATH10K_FW_WMI_OP_VERSION_10_1:
case ATH10K_FW_WMI_OP_VERSION_10_2:
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
if (ath10k_peer_stats_enabled(ar)) {
max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS;
ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS;
} else {
max_num_peers = TARGET_10X_NUM_PEERS;
ar->max_num_stations = TARGET_10X_NUM_STATIONS;
}
ar->max_num_vdevs = TARGET_10X_NUM_VDEVS;
ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
ar->fw_stats_req_mask = WMI_STAT_PEER;
ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
break;
case ATH10K_FW_WMI_OP_VERSION_TLV:
max_num_peers = TARGET_TLV_NUM_PEERS;
ar->max_num_stations = TARGET_TLV_NUM_STATIONS;
ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS;
ar->max_num_tdls_vdevs = TARGET_TLV_NUM_TDLS_VDEVS;
if (ar->hif.bus == ATH10K_BUS_SDIO)
ar->htt.max_num_pending_tx =
TARGET_TLV_NUM_MSDU_DESC_HL;
else
ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC;
ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS;
ar->fw_stats_req_mask = WMI_TLV_STAT_PDEV | WMI_TLV_STAT_VDEV |
WMI_TLV_STAT_PEER | WMI_TLV_STAT_PEER_EXTD;
ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
ar->wmi.mgmt_max_num_pending_tx = TARGET_TLV_MGMT_NUM_MSDU_DESC;
break;
case ATH10K_FW_WMI_OP_VERSION_10_4:
max_num_peers = TARGET_10_4_NUM_PEERS;
ar->max_num_stations = TARGET_10_4_NUM_STATIONS;
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
ar->fw_stats_req_mask = WMI_10_4_STAT_PEER |
WMI_10_4_STAT_PEER_EXTD |
WMI_10_4_STAT_VDEV_EXTD;
ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
ar->max_num_tdls_vdevs = TARGET_10_4_NUM_TDLS_VDEVS;
if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL,
fw_file->fw_features))
ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC_PFC;
else
ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
default:
WARN_ON(1);
return -EINVAL;
}
if (ar->hw_params.num_peers)
ar->max_num_peers = ar->hw_params.num_peers;
else
ar->max_num_peers = max_num_peers;
/* Backwards compatibility for firmwares without
* ATH10K_FW_IE_HTT_OP_VERSION.
*/
if (fw_file->htt_op_version == ATH10K_FW_HTT_OP_VERSION_UNSET) {
switch (fw_file->wmi_op_version) {
case ATH10K_FW_WMI_OP_VERSION_MAIN:
fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_MAIN;
break;
case ATH10K_FW_WMI_OP_VERSION_10_1:
case ATH10K_FW_WMI_OP_VERSION_10_2:
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_10_1;
break;
case ATH10K_FW_WMI_OP_VERSION_TLV:
fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_TLV;
break;
case ATH10K_FW_WMI_OP_VERSION_10_4:
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
ath10k_err(ar, "htt op version not found from fw meta data");
return -EINVAL;
}
}
return 0;
}
static int ath10k_core_reset_rx_filter(struct ath10k *ar)
{
int ret;
int vdev_id;
int vdev_type;
int vdev_subtype;
const u8 *vdev_addr;
vdev_id = 0;
vdev_type = WMI_VDEV_TYPE_STA;
vdev_subtype = ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE);
vdev_addr = ar->mac_addr;
ret = ath10k_wmi_vdev_create(ar, vdev_id, vdev_type, vdev_subtype,
vdev_addr);
if (ret) {
ath10k_err(ar, "failed to create dummy vdev: %d\n", ret);
return ret;
}
ret = ath10k_wmi_vdev_delete(ar, vdev_id);
if (ret) {
ath10k_err(ar, "failed to delete dummy vdev: %d\n", ret);
return ret;
}
/* WMI and HTT may use separate HIF pipes and are not guaranteed to be
* serialized properly implicitly.
*
* Moreover (most) WMI commands have no explicit acknowledges. It is
* possible to infer it implicitly by poking firmware with echo
* command - getting a reply means all preceding comments have been
* (mostly) processed.
*
* In case of vdev create/delete this is sufficient.
*
* Without this it's possible to end up with a race when HTT Rx ring is
* started before vdev create/delete hack is complete allowing a short
* window of opportunity to receive (and Tx ACK) a bunch of frames.
*/
ret = ath10k_wmi_barrier(ar);
if (ret) {
ath10k_err(ar, "failed to ping firmware: %d\n", ret);
return ret;
}
return 0;
}
static int ath10k_core_compat_services(struct ath10k *ar)
{
struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file;
/* all 10.x firmware versions support thermal throttling but don't
* advertise the support via service flags so we have to hardcode
* it here
*/
switch (fw_file->wmi_op_version) {
case ATH10K_FW_WMI_OP_VERSION_10_1:
case ATH10K_FW_WMI_OP_VERSION_10_2:
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
case ATH10K_FW_WMI_OP_VERSION_10_4:
set_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map);
break;
default:
break;
}
return 0;
}
#define TGT_IRAM_READ_PER_ITR (8 * 1024)
static int ath10k_core_copy_target_iram(struct ath10k *ar)
{
const struct ath10k_hw_mem_layout *hw_mem;
const struct ath10k_mem_region *tmp, *mem_region = NULL;
dma_addr_t paddr;
void *vaddr = NULL;
u8 num_read_itr;
int i, ret;
u32 len, remaining_len;
/* copy target iram feature must work also when
* ATH10K_FW_CRASH_DUMP_RAM_DATA is disabled, so
* _ath10k_coredump_get_mem_layout() to accomplist that
*/
hw_mem = _ath10k_coredump_get_mem_layout(ar);
if (!hw_mem)
/* if CONFIG_DEV_COREDUMP is disabled we get NULL, then
* just silently disable the feature by doing nothing
*/
return 0;
for (i = 0; i < hw_mem->region_table.size; i++) {
tmp = &hw_mem->region_table.regions[i];
if (tmp->type == ATH10K_MEM_REGION_TYPE_REG) {
mem_region = tmp;
break;
}
}
if (!mem_region)
return -ENOMEM;
for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
if (ar->wmi.mem_chunks[i].req_id ==
WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID) {
vaddr = ar->wmi.mem_chunks[i].vaddr;
len = ar->wmi.mem_chunks[i].len;
break;
}
}
if (!vaddr || !len) {
ath10k_warn(ar, "No allocated memory for IRAM back up");
return -ENOMEM;
}
len = (len < mem_region->len) ? len : mem_region->len;
paddr = mem_region->start;
num_read_itr = len / TGT_IRAM_READ_PER_ITR;
remaining_len = len % TGT_IRAM_READ_PER_ITR;
for (i = 0; i < num_read_itr; i++) {
ret = ath10k_hif_diag_read(ar, paddr, vaddr,
TGT_IRAM_READ_PER_ITR);
if (ret) {
ath10k_warn(ar, "failed to copy firmware IRAM contents: %d",
ret);
return ret;
}
paddr += TGT_IRAM_READ_PER_ITR;
vaddr += TGT_IRAM_READ_PER_ITR;
}
if (remaining_len) {
ret = ath10k_hif_diag_read(ar, paddr, vaddr, remaining_len);
if (ret) {
ath10k_warn(ar, "failed to copy firmware IRAM contents: %d",
ret);
return ret;
}
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "target IRAM back up completed\n");
return 0;
}
int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
const struct ath10k_fw_components *fw)
{
int status;
u32 val;
lockdep_assert_held(&ar->conf_mutex);
clear_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
ar->running_fw = fw;
if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
ar->running_fw->fw_file.fw_features)) {
ath10k_bmi_start(ar);
/* Enable hardware clock to speed up firmware download */
if (ar->hw_params.hw_ops->enable_pll_clk) {
status = ar->hw_params.hw_ops->enable_pll_clk(ar);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot enable pll ret %d\n",
status);
}
if (ath10k_init_configure_target(ar)) {
status = -EINVAL;
goto err;
}
status = ath10k_download_cal_data(ar);
if (status)
goto err;
/* Some of qca988x solutions are having global reset issue
* during target initialization. Bypassing PLL setting before
* downloading firmware and letting the SoC run on REF_CLK is
* fixing the problem. Corresponding firmware change is also
* needed to set the clock source once the target is
* initialized.
*/
if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT,
ar->running_fw->fw_file.fw_features)) {
status = ath10k_bmi_write32(ar, hi_skip_clock_init, 1);
if (status) {
ath10k_err(ar, "could not write to skip_clock_init: %d\n",
status);
goto err;
}
}
status = ath10k_download_fw(ar);
if (status)
goto err;
status = ath10k_init_uart(ar);
if (status)
goto err;
if (ar->hif.bus == ATH10K_BUS_SDIO) {
status = ath10k_init_sdio(ar, mode);
if (status) {
ath10k_err(ar, "failed to init SDIO: %d\n", status);
goto err;
}
}
}
ar->htc.htc_ops.target_send_suspend_complete =
ath10k_send_suspend_complete;
status = ath10k_htc_init(ar);
if (status) {
ath10k_err(ar, "could not init HTC (%d)\n", status);
goto err;
}
if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
ar->running_fw->fw_file.fw_features)) {
status = ath10k_bmi_done(ar);
if (status)
goto err;
}
status = ath10k_wmi_attach(ar);
if (status) {
ath10k_err(ar, "WMI attach failed: %d\n", status);
goto err;
}
status = ath10k_htt_init(ar);
if (status) {
ath10k_err(ar, "failed to init htt: %d\n", status);
goto err_wmi_detach;
}
status = ath10k_htt_tx_start(&ar->htt);
if (status) {
ath10k_err(ar, "failed to alloc htt tx: %d\n", status);
goto err_wmi_detach;
}
/* If firmware indicates Full Rx Reorder support it must be used in a
* slightly different manner. Let HTT code know.
*/
ar->htt.rx_ring.in_ord_rx = !!(test_bit(WMI_SERVICE_RX_FULL_REORDER,
ar->wmi.svc_map));
status = ath10k_htt_rx_alloc(&ar->htt);
if (status) {
ath10k_err(ar, "failed to alloc htt rx: %d\n", status);
goto err_htt_tx_detach;
}
status = ath10k_hif_start(ar);
if (status) {
ath10k_err(ar, "could not start HIF: %d\n", status);
goto err_htt_rx_detach;
}
status = ath10k_htc_wait_target(&ar->htc);
if (status) {
ath10k_err(ar, "failed to connect to HTC: %d\n", status);
goto err_hif_stop;
}
status = ath10k_hif_start_post(ar);
if (status) {
ath10k_err(ar, "failed to swap mailbox: %d\n", status);
goto err_hif_stop;
}
if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
status = ath10k_htt_connect(&ar->htt);
if (status) {
ath10k_err(ar, "failed to connect htt (%d)\n", status);
goto err_hif_stop;
}
}
status = ath10k_wmi_connect(ar);
if (status) {
ath10k_err(ar, "could not connect wmi: %d\n", status);
goto err_hif_stop;
}
status = ath10k_htc_start(&ar->htc);
if (status) {
ath10k_err(ar, "failed to start htc: %d\n", status);
goto err_hif_stop;
}
if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
status = ath10k_wmi_wait_for_service_ready(ar);
if (status) {
ath10k_warn(ar, "wmi service ready event not received");
goto err_hif_stop;
}
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n",
ar->hw->wiphy->fw_version);
if (test_bit(ATH10K_FW_FEATURE_IRAM_RECOVERY,
ar->running_fw->fw_file.fw_features)) {
status = ath10k_core_copy_target_iram(ar);
if (status) {
ath10k_warn(ar, "failed to copy target iram contents: %d",
status);
goto err_hif_stop;
}
}
if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map) &&
mode == ATH10K_FIRMWARE_MODE_NORMAL) {
val = 0;
if (ath10k_peer_stats_enabled(ar))
val = WMI_10_4_PEER_STATS;
/* Enable vdev stats by default */
val |= WMI_10_4_VDEV_STATS;
if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map))
val |= WMI_10_4_BSS_CHANNEL_INFO_64;
ath10k_core_fetch_btcoex_dt(ar);
/* 10.4 firmware supports BT-Coex without reloading firmware
* via pdev param. To support Bluetooth coexistence pdev param,
* WMI_COEX_GPIO_SUPPORT of extended resource config should be
* enabled always.
*
* We can still enable BTCOEX if firmware has the support
* even though btceox_support value is
* ATH10K_DT_BTCOEX_NOT_FOUND
*/
if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
ar->running_fw->fw_file.fw_features) &&
ar->coex_support)
val |= WMI_10_4_COEX_GPIO_SUPPORT;
if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
ar->wmi.svc_map))
val |= WMI_10_4_TDLS_EXPLICIT_MODE_ONLY;
if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
ar->wmi.svc_map))
val |= WMI_10_4_TDLS_UAPSD_BUFFER_STA;
if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI,
ar->wmi.svc_map))
val |= WMI_10_4_TX_DATA_ACK_RSSI;
if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map))
val |= WMI_10_4_REPORT_AIRTIME;
if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
ar->wmi.svc_map))
val |= WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT;
status = ath10k_mac_ext_resource_config(ar, val);
if (status) {
ath10k_err(ar,
"failed to send ext resource cfg command : %d\n",
status);
goto err_hif_stop;
}
}
status = ath10k_wmi_cmd_init(ar);
if (status) {
ath10k_err(ar, "could not send WMI init command (%d)\n",
status);
goto err_hif_stop;
}
status = ath10k_wmi_wait_for_unified_ready(ar);
if (status) {
ath10k_err(ar, "wmi unified ready event not received\n");
goto err_hif_stop;
}
status = ath10k_core_compat_services(ar);
if (status) {
ath10k_err(ar, "compat services failed: %d\n", status);
goto err_hif_stop;
}
status = ath10k_wmi_pdev_set_base_macaddr(ar, ar->mac_addr);
if (status && status != -EOPNOTSUPP) {
ath10k_err(ar,
"failed to set base mac address: %d\n", status);
goto err_hif_stop;
}
/* Some firmware revisions do not properly set up hardware rx filter
* registers.
*
* A known example from QCA9880 and 10.2.4 is that MAC_PCU_ADDR1_MASK
* is filled with 0s instead of 1s allowing HW to respond with ACKs to
* any frames that matches MAC_PCU_RX_FILTER which is also
* misconfigured to accept anything.
*
* The ADDR1 is programmed using internal firmware structure field and
* can't be (easily/sanely) reached from the driver explicitly. It is
* possible to implicitly make it correct by creating a dummy vdev and
* then deleting it.
*/
if (ar->hw_params.hw_filter_reset_required &&
mode == ATH10K_FIRMWARE_MODE_NORMAL) {
status = ath10k_core_reset_rx_filter(ar);
if (status) {
ath10k_err(ar,
"failed to reset rx filter: %d\n", status);
goto err_hif_stop;
}
}
status = ath10k_htt_rx_ring_refill(ar);
if (status) {
ath10k_err(ar, "failed to refill htt rx ring: %d\n", status);
goto err_hif_stop;
}
if (ar->max_num_vdevs >= 64)
ar->free_vdev_map = 0xFFFFFFFFFFFFFFFFLL;
else
ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
INIT_LIST_HEAD(&ar->arvifs);
/* we don't care about HTT in UTF mode */
if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
status = ath10k_htt_setup(&ar->htt);
if (status) {
ath10k_err(ar, "failed to setup htt: %d\n", status);
goto err_hif_stop;
}
}
status = ath10k_debug_start(ar);
if (status)
goto err_hif_stop;
status = ath10k_hif_set_target_log_mode(ar, fw_diag_log);
if (status && status != -EOPNOTSUPP) {
ath10k_warn(ar, "set target log mode failed: %d\n", status);
goto err_hif_stop;
}
return 0;
err_hif_stop:
ath10k_hif_stop(ar);
err_htt_rx_detach:
ath10k_htt_rx_free(&ar->htt);
err_htt_tx_detach:
ath10k_htt_tx_free(&ar->htt);
err_wmi_detach:
ath10k_wmi_detach(ar);
err:
return status;
}
EXPORT_SYMBOL(ath10k_core_start);
int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
{
int ret;
unsigned long time_left;
reinit_completion(&ar->target_suspend);
ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt);
if (ret) {
ath10k_warn(ar, "could not suspend target (%d)\n", ret);
return ret;
}
time_left = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
if (!time_left) {
ath10k_warn(ar, "suspend timed out - target pause event never came\n");
return -ETIMEDOUT;
}
return 0;
}
void ath10k_core_stop(struct ath10k *ar)
{
lockdep_assert_held(&ar->conf_mutex);
ath10k_debug_stop(ar);
/* try to suspend target */
if (ar->state != ATH10K_STATE_RESTARTING &&
ar->state != ATH10K_STATE_UTF)
ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR);
ath10k_hif_stop(ar);
ath10k_htt_tx_stop(&ar->htt);
ath10k_htt_rx_free(&ar->htt);
ath10k_wmi_detach(ar);
ar->id.bmi_ids_valid = false;
}
EXPORT_SYMBOL(ath10k_core_stop);
/* mac80211 manages fw/hw initialization through start/stop hooks. However in
* order to know what hw capabilities should be advertised to mac80211 it is
* necessary to load the firmware (and tear it down immediately since start
* hook will try to init it again) before registering
*/
static int ath10k_core_probe_fw(struct ath10k *ar)
{
struct bmi_target_info target_info;
int ret = 0;
ret = ath10k_hif_power_up(ar, ATH10K_FIRMWARE_MODE_NORMAL);
if (ret) {
ath10k_err(ar, "could not power on hif bus (%d)\n", ret);
return ret;
}
switch (ar->hif.bus) {
case ATH10K_BUS_SDIO:
memset(&target_info, 0, sizeof(target_info));
ret = ath10k_bmi_get_target_info_sdio(ar, &target_info);
if (ret) {
ath10k_err(ar, "could not get target info (%d)\n", ret);
goto err_power_down;
}
ar->target_version = target_info.version;
ar->hw->wiphy->hw_version = target_info.version;
break;
case ATH10K_BUS_PCI:
case ATH10K_BUS_AHB:
case ATH10K_BUS_USB:
memset(&target_info, 0, sizeof(target_info));
ret = ath10k_bmi_get_target_info(ar, &target_info);
if (ret) {
ath10k_err(ar, "could not get target info (%d)\n", ret);
goto err_power_down;
}
ar->target_version = target_info.version;
ar->hw->wiphy->hw_version = target_info.version;
break;
case ATH10K_BUS_SNOC:
memset(&target_info, 0, sizeof(target_info));
ret = ath10k_hif_get_target_info(ar, &target_info);
if (ret) {
ath10k_err(ar, "could not get target info (%d)\n", ret);
goto err_power_down;
}
ar->target_version = target_info.version;
ar->hw->wiphy->hw_version = target_info.version;
break;
default:
ath10k_err(ar, "incorrect hif bus type: %d\n", ar->hif.bus);
}
ret = ath10k_init_hw_params(ar);
if (ret) {
ath10k_err(ar, "could not get hw params (%d)\n", ret);
goto err_power_down;
}
ret = ath10k_core_fetch_firmware_files(ar);
if (ret) {
ath10k_err(ar, "could not fetch firmware files (%d)\n", ret);
goto err_power_down;
}
BUILD_BUG_ON(sizeof(ar->hw->wiphy->fw_version) !=
sizeof(ar->normal_mode_fw.fw_file.fw_version));
memcpy(ar->hw->wiphy->fw_version, ar->normal_mode_fw.fw_file.fw_version,
sizeof(ar->hw->wiphy->fw_version));
ath10k_debug_print_hwfw_info(ar);
if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
ar->normal_mode_fw.fw_file.fw_features)) {
ret = ath10k_core_pre_cal_download(ar);
if (ret) {
/* pre calibration data download is not necessary
* for all the chipsets. Ignore failures and continue.
*/
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"could not load pre cal data: %d\n", ret);
}
ret = ath10k_core_get_board_id_from_otp(ar);
if (ret && ret != -EOPNOTSUPP) {
ath10k_err(ar, "failed to get board id from otp: %d\n",
ret);
goto err_free_firmware_files;
}
ret = ath10k_core_check_smbios(ar);
if (ret)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n");
ret = ath10k_core_check_dt(ar);
if (ret)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n");
ret = ath10k_core_fetch_board_file(ar, ATH10K_BD_IE_BOARD);
if (ret) {
ath10k_err(ar, "failed to fetch board file: %d\n", ret);
goto err_free_firmware_files;
}
ath10k_debug_print_board_info(ar);
}
device_get_mac_address(ar->dev, ar->mac_addr);
ret = ath10k_core_init_firmware_features(ar);
if (ret) {
ath10k_err(ar, "fatal problem with firmware features: %d\n",
ret);
goto err_free_firmware_files;
}
if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
ar->normal_mode_fw.fw_file.fw_features)) {
ret = ath10k_swap_code_seg_init(ar,
&ar->normal_mode_fw.fw_file);
if (ret) {
ath10k_err(ar, "failed to initialize code swap segment: %d\n",
ret);
goto err_free_firmware_files;
}
}
mutex_lock(&ar->conf_mutex);
ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL,
&ar->normal_mode_fw);
if (ret) {
ath10k_err(ar, "could not init core (%d)\n", ret);
goto err_unlock;
}
ath10k_debug_print_boot_info(ar);
ath10k_core_stop(ar);
mutex_unlock(&ar->conf_mutex);
ath10k_hif_power_down(ar);
return 0;
err_unlock:
mutex_unlock(&ar->conf_mutex);
err_free_firmware_files:
ath10k_core_free_firmware_files(ar);
err_power_down:
ath10k_hif_power_down(ar);
return ret;
}
static void ath10k_core_register_work(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k, register_work);
int status;
/* peer stats are enabled by default */
set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
status = ath10k_core_probe_fw(ar);
if (status) {
ath10k_err(ar, "could not probe fw (%d)\n", status);
goto err;
}
status = ath10k_mac_register(ar);
if (status) {
ath10k_err(ar, "could not register to mac80211 (%d)\n", status);
goto err_release_fw;
}
status = ath10k_coredump_register(ar);
if (status) {
ath10k_err(ar, "unable to register coredump\n");
goto err_unregister_mac;
}
status = ath10k_debug_register(ar);
if (status) {
ath10k_err(ar, "unable to initialize debugfs\n");
goto err_unregister_coredump;
}
status = ath10k_spectral_create(ar);
if (status) {
ath10k_err(ar, "failed to initialize spectral\n");
goto err_debug_destroy;
}
status = ath10k_thermal_register(ar);
if (status) {
ath10k_err(ar, "could not register thermal device: %d\n",
status);
goto err_spectral_destroy;
}
set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
return;
err_spectral_destroy:
ath10k_spectral_destroy(ar);
err_debug_destroy:
ath10k_debug_destroy(ar);
err_unregister_coredump:
ath10k_coredump_unregister(ar);
err_unregister_mac:
ath10k_mac_unregister(ar);
err_release_fw:
ath10k_core_free_firmware_files(ar);
err:
/* TODO: It's probably a good idea to release device from the driver
* but calling device_release_driver() here will cause a deadlock.
*/
return;
}
int ath10k_core_register(struct ath10k *ar,
const struct ath10k_bus_params *bus_params)
{
ar->bus_param = *bus_params;
queue_work(ar->workqueue, &ar->register_work);
return 0;
}
EXPORT_SYMBOL(ath10k_core_register);
void ath10k_core_unregister(struct ath10k *ar)
{
cancel_work_sync(&ar->register_work);
if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
return;
ath10k_thermal_unregister(ar);
/* Stop spectral before unregistering from mac80211 to remove the
* relayfs debugfs file cleanly. Otherwise the parent debugfs tree
* would be already be free'd recursively, leading to a double free.
*/
ath10k_spectral_destroy(ar);
/* We must unregister from mac80211 before we stop HTC and HIF.
* Otherwise we will fail to submit commands to FW and mac80211 will be
* unhappy about callback failures.
*/
ath10k_mac_unregister(ar);
ath10k_testmode_destroy(ar);
ath10k_core_free_firmware_files(ar);
ath10k_core_free_board_files(ar);
ath10k_debug_unregister(ar);
}
EXPORT_SYMBOL(ath10k_core_unregister);
struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
enum ath10k_bus bus,
enum ath10k_hw_rev hw_rev,
const struct ath10k_hif_ops *hif_ops)
{
struct ath10k *ar;
int ret;
ar = ath10k_mac_create(priv_size);
if (!ar)
return NULL;
ar->ath_common.priv = ar;
ar->ath_common.hw = ar->hw;
ar->dev = dev;
ar->hw_rev = hw_rev;
ar->hif.ops = hif_ops;
ar->hif.bus = bus;
switch (hw_rev) {
case ATH10K_HW_QCA988X:
case ATH10K_HW_QCA9887:
ar->regs = &qca988x_regs;
ar->hw_ce_regs = &qcax_ce_regs;
ar->hw_values = &qca988x_values;
break;
case ATH10K_HW_QCA6174:
case ATH10K_HW_QCA9377:
ar->regs = &qca6174_regs;
ar->hw_ce_regs = &qcax_ce_regs;
ar->hw_values = &qca6174_values;
break;
case ATH10K_HW_QCA99X0:
case ATH10K_HW_QCA9984:
ar->regs = &qca99x0_regs;
ar->hw_ce_regs = &qcax_ce_regs;
ar->hw_values = &qca99x0_values;
break;
case ATH10K_HW_QCA9888:
ar->regs = &qca99x0_regs;
ar->hw_ce_regs = &qcax_ce_regs;
ar->hw_values = &qca9888_values;
break;
case ATH10K_HW_QCA4019:
ar->regs = &qca4019_regs;
ar->hw_ce_regs = &qcax_ce_regs;
ar->hw_values = &qca4019_values;
break;
case ATH10K_HW_WCN3990:
ar->regs = &wcn3990_regs;
ar->hw_ce_regs = &wcn3990_ce_regs;
ar->hw_values = &wcn3990_values;
break;
default:
ath10k_err(ar, "unsupported core hardware revision %d\n",
hw_rev);
ret = -ENOTSUPP;
goto err_free_mac;
}
init_completion(&ar->scan.started);
init_completion(&ar->scan.completed);
init_completion(&ar->scan.on_channel);
init_completion(&ar->target_suspend);
init_completion(&ar->driver_recovery);
init_completion(&ar->wow.wakeup_completed);
init_completion(&ar->install_key_done);
init_completion(&ar->vdev_setup_done);
init_completion(&ar->vdev_delete_done);
init_completion(&ar->thermal.wmi_sync);
init_completion(&ar->bss_survey_done);
init_completion(&ar->peer_delete_done);
init_completion(&ar->peer_stats_info_complete);
INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work);
ar->workqueue = create_singlethread_workqueue("ath10k_wq");
if (!ar->workqueue)
goto err_free_mac;
ar->workqueue_aux = create_singlethread_workqueue("ath10k_aux_wq");
if (!ar->workqueue_aux)
goto err_free_wq;
ar->workqueue_tx_complete =
create_singlethread_workqueue("ath10k_tx_complete_wq");
if (!ar->workqueue_tx_complete)
goto err_free_aux_wq;
mutex_init(&ar->conf_mutex);
mutex_init(&ar->dump_mutex);
spin_lock_init(&ar->data_lock);
INIT_LIST_HEAD(&ar->peers);
init_waitqueue_head(&ar->peer_mapping_wq);
init_waitqueue_head(&ar->htt.empty_tx_wq);
init_waitqueue_head(&ar->wmi.tx_credits_wq);
skb_queue_head_init(&ar->htt.rx_indication_head);
init_completion(&ar->offchan_tx_completed);
INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work);
skb_queue_head_init(&ar->offchan_tx_queue);
INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work);
skb_queue_head_init(&ar->wmi_mgmt_tx_queue);
INIT_WORK(&ar->register_work, ath10k_core_register_work);
INIT_WORK(&ar->restart_work, ath10k_core_restart);
INIT_WORK(&ar->set_coverage_class_work,
ath10k_core_set_coverage_class_work);
init_dummy_netdev(&ar->napi_dev);
ret = ath10k_coredump_create(ar);
if (ret)
goto err_free_tx_complete;
ret = ath10k_debug_create(ar);
if (ret)
goto err_free_coredump;
return ar;
err_free_coredump:
ath10k_coredump_destroy(ar);
err_free_tx_complete:
destroy_workqueue(ar->workqueue_tx_complete);
err_free_aux_wq:
destroy_workqueue(ar->workqueue_aux);
err_free_wq:
destroy_workqueue(ar->workqueue);
err_free_mac:
ath10k_mac_destroy(ar);
return NULL;
}
EXPORT_SYMBOL(ath10k_core_create);
void ath10k_core_destroy(struct ath10k *ar)
{
destroy_workqueue(ar->workqueue);
destroy_workqueue(ar->workqueue_aux);
destroy_workqueue(ar->workqueue_tx_complete);
ath10k_debug_destroy(ar);
ath10k_coredump_destroy(ar);
ath10k_htt_tx_destroy(&ar->htt);
ath10k_wmi_free_host_mem(ar);
ath10k_mac_destroy(ar);
}
EXPORT_SYMBOL(ath10k_core_destroy);
MODULE_AUTHOR("Qualcomm Atheros");
MODULE_DESCRIPTION("Core module for Qualcomm Atheros 802.11ac wireless LAN cards.");
MODULE_LICENSE("Dual BSD/GPL");
Reference in New Issue View Git Blame Copy Permalink