linux-zen-server/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h

85 lines
2.5 KiB
C

// SPDX-License-Identifier: ISC
/*
* Copyright (c) 2014 Broadcom Corporation
*/
#ifndef BRCMFMAC_COMMON_H
#define BRCMFMAC_COMMON_H
#include <linux/platform_device.h>
#include <linux/platform_data/brcmfmac.h>
#include "fwil_types.h"
#define BRCMF_FW_ALTPATH_LEN 256
/* Definitions for the module global and device specific settings are defined
* here. Two structs are used for them. brcmf_mp_global_t and brcmf_mp_device.
* The mp_global is instantiated once in a global struct and gets initialized
* by the common_attach function which should be called before any other
* (module) initiliazation takes place. The device specific settings is part
* of the drvr struct and should be initialized on every brcmf_attach.
*/
/**
* struct brcmf_mp_global_t - Global module paramaters.
*
* @firmware_path: Alternative firmware path.
*/
struct brcmf_mp_global_t {
char firmware_path[BRCMF_FW_ALTPATH_LEN];
};
extern struct brcmf_mp_global_t brcmf_mp_global;
/**
* struct brcmf_mp_device - Device module paramaters.
*
* @p2p_enable: Legacy P2P0 enable (old wpa_supplicant).
* @feature_disable: Feature_disable bitmask.
* @fcmode: FWS flow control.
* @roamoff: Firmware roaming off?
* @ignore_probe_fail: Ignore probe failure.
* @trivial_ccode_map: Assume firmware uses ISO3166 country codes with rev 0
* @country_codes: If available, pointer to struct for translating country codes
* @bus: Bus specific platform data. Only SDIO at the mmoment.
*/
struct brcmf_mp_device {
bool p2p_enable;
unsigned int feature_disable;
int fcmode;
bool roamoff;
bool iapp;
bool ignore_probe_fail;
bool trivial_ccode_map;
struct brcmfmac_pd_cc *country_codes;
const char *board_type;
unsigned char mac[ETH_ALEN];
const char *antenna_sku;
union {
struct brcmfmac_sdio_pd sdio;
} bus;
};
void brcmf_c_set_joinpref_default(struct brcmf_if *ifp);
struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
enum brcmf_bus_type bus_type,
u32 chip, u32 chiprev);
void brcmf_release_module_param(struct brcmf_mp_device *module_param);
/* Sets dongle media info (drv_version, mac address). */
int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
int brcmf_c_set_cur_etheraddr(struct brcmf_if *ifp, const u8 *addr);
#ifdef CONFIG_DMI
void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev);
#else
static inline void
brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev) {}
#endif
u8 brcmf_map_prio_to_prec(void *cfg, u8 prio);
u8 brcmf_map_prio_to_aci(void *cfg, u8 prio);
#endif /* BRCMFMAC_COMMON_H */