5746 lines
146 KiB
C
5746 lines
146 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Probe module for 8250/16550-type PCI serial ports.
|
|
*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
* Copyright (C) 2001 Russell King, All Rights Reserved.
|
|
*/
|
|
#undef DEBUG
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/math.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/8250_pci.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "8250.h"
|
|
#include "8250_pcilib.h"
|
|
|
|
/*
|
|
* init function returns:
|
|
* > 0 - number of ports
|
|
* = 0 - use board->num_ports
|
|
* < 0 - error
|
|
*/
|
|
struct pci_serial_quirk {
|
|
u32 vendor;
|
|
u32 device;
|
|
u32 subvendor;
|
|
u32 subdevice;
|
|
int (*probe)(struct pci_dev *dev);
|
|
int (*init)(struct pci_dev *dev);
|
|
int (*setup)(struct serial_private *,
|
|
const struct pciserial_board *,
|
|
struct uart_8250_port *, int);
|
|
void (*exit)(struct pci_dev *dev);
|
|
};
|
|
|
|
struct f815xxa_data {
|
|
spinlock_t lock;
|
|
int idx;
|
|
};
|
|
|
|
struct serial_private {
|
|
struct pci_dev *dev;
|
|
unsigned int nr;
|
|
struct pci_serial_quirk *quirk;
|
|
const struct pciserial_board *board;
|
|
int line[];
|
|
};
|
|
|
|
#define PCI_DEVICE_ID_HPE_PCI_SERIAL 0x37e
|
|
|
|
static const struct pci_device_id pci_use_msi[] = {
|
|
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
|
|
0xA000, 0x1000) },
|
|
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
|
|
0xA000, 0x1000) },
|
|
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
|
|
0xA000, 0x1000) },
|
|
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
|
|
PCI_ANY_ID, PCI_ANY_ID) },
|
|
{ }
|
|
};
|
|
|
|
static int pci_default_setup(struct serial_private*,
|
|
const struct pciserial_board*, struct uart_8250_port *, int);
|
|
|
|
static void moan_device(const char *str, struct pci_dev *dev)
|
|
{
|
|
pci_err(dev, "%s\n"
|
|
"Please send the output of lspci -vv, this\n"
|
|
"message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
|
|
"manufacturer and name of serial board or\n"
|
|
"modem board to <linux-serial@vger.kernel.org>.\n",
|
|
str, dev->vendor, dev->device,
|
|
dev->subsystem_vendor, dev->subsystem_device);
|
|
}
|
|
|
|
static int
|
|
setup_port(struct serial_private *priv, struct uart_8250_port *port,
|
|
u8 bar, unsigned int offset, int regshift)
|
|
{
|
|
return serial8250_pci_setup_port(priv->dev, port, bar, offset, regshift);
|
|
}
|
|
|
|
/*
|
|
* ADDI-DATA GmbH communication cards <info@addi-data.com>
|
|
*/
|
|
static int addidata_apci7800_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar = 0, offset = board->first_offset;
|
|
bar = FL_GET_BASE(board->flags);
|
|
|
|
if (idx < 2) {
|
|
offset += idx * board->uart_offset;
|
|
} else if ((idx >= 2) && (idx < 4)) {
|
|
bar += 1;
|
|
offset += ((idx - 2) * board->uart_offset);
|
|
} else if ((idx >= 4) && (idx < 6)) {
|
|
bar += 2;
|
|
offset += ((idx - 4) * board->uart_offset);
|
|
} else if (idx >= 6) {
|
|
bar += 3;
|
|
offset += ((idx - 6) * board->uart_offset);
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* AFAVLAB uses a different mixture of BARs and offsets
|
|
* Not that ugly ;) -- HW
|
|
*/
|
|
static int
|
|
afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
bar = FL_GET_BASE(board->flags);
|
|
if (idx < 4)
|
|
bar += idx;
|
|
else {
|
|
bar = 4;
|
|
offset += (idx - 4) * board->uart_offset;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* HP's Remote Management Console. The Diva chip came in several
|
|
* different versions. N-class, L2000 and A500 have two Diva chips, each
|
|
* with 3 UARTs (the third UART on the second chip is unused). Superdome
|
|
* and Keystone have one Diva chip with 3 UARTs. Some later machines have
|
|
* one Diva chip, but it has been expanded to 5 UARTs.
|
|
*/
|
|
static int pci_hp_diva_init(struct pci_dev *dev)
|
|
{
|
|
int rc = 0;
|
|
|
|
switch (dev->subsystem_device) {
|
|
case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
|
|
case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
|
|
case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
|
|
case PCI_DEVICE_ID_HP_DIVA_EVEREST:
|
|
rc = 3;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
|
|
rc = 2;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
|
|
rc = 4;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
|
|
case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
|
|
rc = 1;
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* HP's Diva chip puts the 4th/5th serial port further out, and
|
|
* some serial ports are supposed to be hidden on certain models.
|
|
*/
|
|
static int
|
|
pci_hp_diva_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int offset = board->first_offset;
|
|
unsigned int bar = FL_GET_BASE(board->flags);
|
|
|
|
switch (priv->dev->subsystem_device) {
|
|
case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
|
|
if (idx == 3)
|
|
idx++;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_EVEREST:
|
|
if (idx > 0)
|
|
idx++;
|
|
if (idx > 2)
|
|
idx++;
|
|
break;
|
|
}
|
|
if (idx > 2)
|
|
offset = 0x18;
|
|
|
|
offset += idx * board->uart_offset;
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* Added for EKF Intel i960 serial boards
|
|
*/
|
|
static int pci_inteli960ni_init(struct pci_dev *dev)
|
|
{
|
|
u32 oldval;
|
|
|
|
if (!(dev->subsystem_device & 0x1000))
|
|
return -ENODEV;
|
|
|
|
/* is firmware started? */
|
|
pci_read_config_dword(dev, 0x44, &oldval);
|
|
if (oldval == 0x00001000L) { /* RESET value */
|
|
pci_dbg(dev, "Local i960 firmware missing\n");
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some PCI serial cards using the PLX 9050 PCI interface chip require
|
|
* that the card interrupt be explicitly enabled or disabled. This
|
|
* seems to be mainly needed on card using the PLX which also use I/O
|
|
* mapped memory.
|
|
*/
|
|
static int pci_plx9050_init(struct pci_dev *dev)
|
|
{
|
|
u8 irq_config;
|
|
void __iomem *p;
|
|
|
|
if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar 0", dev);
|
|
return 0;
|
|
}
|
|
|
|
irq_config = 0x41;
|
|
if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
|
|
dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
|
|
irq_config = 0x43;
|
|
|
|
if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
|
|
(dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
|
|
/*
|
|
* As the megawolf cards have the int pins active
|
|
* high, and have 2 UART chips, both ints must be
|
|
* enabled on the 9050. Also, the UARTS are set in
|
|
* 16450 mode by default, so we have to enable the
|
|
* 16C950 'enhanced' mode so that we can use the
|
|
* deep FIFOs
|
|
*/
|
|
irq_config = 0x5b;
|
|
/*
|
|
* enable/disable interrupts
|
|
*/
|
|
p = ioremap(pci_resource_start(dev, 0), 0x80);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
writel(irq_config, p + 0x4c);
|
|
|
|
/*
|
|
* Read the register back to ensure that it took effect.
|
|
*/
|
|
readl(p + 0x4c);
|
|
iounmap(p);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pci_plx9050_exit(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
|
|
if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
|
|
return;
|
|
|
|
/*
|
|
* disable interrupts
|
|
*/
|
|
p = ioremap(pci_resource_start(dev, 0), 0x80);
|
|
if (p != NULL) {
|
|
writel(0, p + 0x4c);
|
|
|
|
/*
|
|
* Read the register back to ensure that it took effect.
|
|
*/
|
|
readl(p + 0x4c);
|
|
iounmap(p);
|
|
}
|
|
}
|
|
|
|
#define NI8420_INT_ENABLE_REG 0x38
|
|
#define NI8420_INT_ENABLE_BIT 0x2000
|
|
|
|
static void pci_ni8420_exit(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return;
|
|
}
|
|
|
|
p = pci_ioremap_bar(dev, bar);
|
|
if (p == NULL)
|
|
return;
|
|
|
|
/* Disable the CPU Interrupt */
|
|
writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT),
|
|
p + NI8420_INT_ENABLE_REG);
|
|
iounmap(p);
|
|
}
|
|
|
|
|
|
/* MITE registers */
|
|
#define MITE_IOWBSR1 0xc4
|
|
#define MITE_IOWCR1 0xf4
|
|
#define MITE_LCIMR1 0x08
|
|
#define MITE_LCIMR2 0x10
|
|
|
|
#define MITE_LCIMR2_CLR_CPU_IE (1 << 30)
|
|
|
|
static void pci_ni8430_exit(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return;
|
|
}
|
|
|
|
p = pci_ioremap_bar(dev, bar);
|
|
if (p == NULL)
|
|
return;
|
|
|
|
/* Disable the CPU Interrupt */
|
|
writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2);
|
|
iounmap(p);
|
|
}
|
|
|
|
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
|
|
static int
|
|
sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
bar = 0;
|
|
|
|
if (idx < 4) {
|
|
/* first four channels map to 0, 0x100, 0x200, 0x300 */
|
|
offset += idx * board->uart_offset;
|
|
} else if (idx < 8) {
|
|
/* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
|
|
offset += idx * board->uart_offset + 0xC00;
|
|
} else /* we have only 8 ports on PMC-OCTALPRO */
|
|
return 1;
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* This does initialization for PMC OCTALPRO cards:
|
|
* maps the device memory, resets the UARTs (needed, bc
|
|
* if the module is removed and inserted again, the card
|
|
* is in the sleep mode) and enables global interrupt.
|
|
*/
|
|
|
|
/* global control register offset for SBS PMC-OctalPro */
|
|
#define OCT_REG_CR_OFF 0x500
|
|
|
|
static int sbs_init(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
|
|
p = pci_ioremap_bar(dev, 0);
|
|
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
/* Set bit-4 Control Register (UART RESET) in to reset the uarts */
|
|
writeb(0x10, p + OCT_REG_CR_OFF);
|
|
udelay(50);
|
|
writeb(0x0, p + OCT_REG_CR_OFF);
|
|
|
|
/* Set bit-2 (INTENABLE) of Control Register */
|
|
writeb(0x4, p + OCT_REG_CR_OFF);
|
|
iounmap(p);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Disables the global interrupt of PMC-OctalPro
|
|
*/
|
|
|
|
static void sbs_exit(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
|
|
p = pci_ioremap_bar(dev, 0);
|
|
/* FIXME: What if resource_len < OCT_REG_CR_OFF */
|
|
if (p != NULL)
|
|
writeb(0, p + OCT_REG_CR_OFF);
|
|
iounmap(p);
|
|
}
|
|
|
|
/*
|
|
* SIIG serial cards have an PCI interface chip which also controls
|
|
* the UART clocking frequency. Each UART can be clocked independently
|
|
* (except cards equipped with 4 UARTs) and initial clocking settings
|
|
* are stored in the EEPROM chip. It can cause problems because this
|
|
* version of serial driver doesn't support differently clocked UART's
|
|
* on single PCI card. To prevent this, initialization functions set
|
|
* high frequency clocking for all UART's on given card. It is safe (I
|
|
* hope) because it doesn't touch EEPROM settings to prevent conflicts
|
|
* with other OSes (like M$ DOS).
|
|
*
|
|
* SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
|
|
*
|
|
* There is two family of SIIG serial cards with different PCI
|
|
* interface chip and different configuration methods:
|
|
* - 10x cards have control registers in IO and/or memory space;
|
|
* - 20x cards have control registers in standard PCI configuration space.
|
|
*
|
|
* Note: all 10x cards have PCI device ids 0x10..
|
|
* all 20x cards have PCI device ids 0x20..
|
|
*
|
|
* There are also Quartet Serial cards which use Oxford Semiconductor
|
|
* 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
|
|
*
|
|
* Note: some SIIG cards are probed by the parport_serial object.
|
|
*/
|
|
|
|
#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
|
|
#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
|
|
|
|
static int pci_siig10x_init(struct pci_dev *dev)
|
|
{
|
|
u16 data;
|
|
void __iomem *p;
|
|
|
|
switch (dev->device & 0xfff8) {
|
|
case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
|
|
data = 0xffdf;
|
|
break;
|
|
case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
|
|
data = 0xf7ff;
|
|
break;
|
|
default: /* 1S1P, 4S */
|
|
data = 0xfffb;
|
|
break;
|
|
}
|
|
|
|
p = ioremap(pci_resource_start(dev, 0), 0x80);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
writew(readw(p + 0x28) & data, p + 0x28);
|
|
readw(p + 0x28);
|
|
iounmap(p);
|
|
return 0;
|
|
}
|
|
|
|
#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
|
|
#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
|
|
|
|
static int pci_siig20x_init(struct pci_dev *dev)
|
|
{
|
|
u8 data;
|
|
|
|
/* Change clock frequency for the first UART. */
|
|
pci_read_config_byte(dev, 0x6f, &data);
|
|
pci_write_config_byte(dev, 0x6f, data & 0xef);
|
|
|
|
/* If this card has 2 UART, we have to do the same with second UART. */
|
|
if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
|
|
((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
|
|
pci_read_config_byte(dev, 0x73, &data);
|
|
pci_write_config_byte(dev, 0x73, data & 0xef);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pci_siig_init(struct pci_dev *dev)
|
|
{
|
|
unsigned int type = dev->device & 0xff00;
|
|
|
|
if (type == 0x1000)
|
|
return pci_siig10x_init(dev);
|
|
if (type == 0x2000)
|
|
return pci_siig20x_init(dev);
|
|
|
|
moan_device("Unknown SIIG card", dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int pci_siig_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
|
|
|
|
if (idx > 3) {
|
|
bar = 4;
|
|
offset = (idx - 4) * 8;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, 0);
|
|
}
|
|
|
|
/*
|
|
* Timedia has an explosion of boards, and to avoid the PCI table from
|
|
* growing *huge*, we use this function to collapse some 70 entries
|
|
* in the PCI table into one, for sanity's and compactness's sake.
|
|
*/
|
|
static const unsigned short timedia_single_port[] = {
|
|
0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
|
|
};
|
|
|
|
static const unsigned short timedia_dual_port[] = {
|
|
0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
|
|
0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
|
|
0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
|
|
0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
|
|
0xD079, 0
|
|
};
|
|
|
|
static const unsigned short timedia_quad_port[] = {
|
|
0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
|
|
0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
|
|
0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
|
|
0xB157, 0
|
|
};
|
|
|
|
static const unsigned short timedia_eight_port[] = {
|
|
0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
|
|
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
|
|
};
|
|
|
|
static const struct timedia_struct {
|
|
int num;
|
|
const unsigned short *ids;
|
|
} timedia_data[] = {
|
|
{ 1, timedia_single_port },
|
|
{ 2, timedia_dual_port },
|
|
{ 4, timedia_quad_port },
|
|
{ 8, timedia_eight_port }
|
|
};
|
|
|
|
/*
|
|
* There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
|
|
* listing them individually, this driver merely grabs them all with
|
|
* PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
|
|
* and should be left free to be claimed by parport_serial instead.
|
|
*/
|
|
static int pci_timedia_probe(struct pci_dev *dev)
|
|
{
|
|
/*
|
|
* Check the third digit of the subdevice ID
|
|
* (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
|
|
*/
|
|
if ((dev->subsystem_device & 0x00f0) >= 0x70) {
|
|
pci_info(dev, "ignoring Timedia subdevice %04x for parport_serial\n",
|
|
dev->subsystem_device);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_timedia_init(struct pci_dev *dev)
|
|
{
|
|
const unsigned short *ids;
|
|
int i, j;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
|
|
ids = timedia_data[i].ids;
|
|
for (j = 0; ids[j]; j++)
|
|
if (dev->subsystem_device == ids[j])
|
|
return timedia_data[i].num;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Timedia/SUNIX uses a mixture of BARs and offsets
|
|
* Ugh, this is ugly as all hell --- TYT
|
|
*/
|
|
static int
|
|
pci_timedia_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar = 0, offset = board->first_offset;
|
|
|
|
switch (idx) {
|
|
case 0:
|
|
bar = 0;
|
|
break;
|
|
case 1:
|
|
offset = board->uart_offset;
|
|
bar = 0;
|
|
break;
|
|
case 2:
|
|
bar = 1;
|
|
break;
|
|
case 3:
|
|
offset = board->uart_offset;
|
|
fallthrough;
|
|
case 4: /* BAR 2 */
|
|
case 5: /* BAR 3 */
|
|
case 6: /* BAR 4 */
|
|
case 7: /* BAR 5 */
|
|
bar = idx - 2;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* Some Titan cards are also a little weird
|
|
*/
|
|
static int
|
|
titan_400l_800l_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
switch (idx) {
|
|
case 0:
|
|
bar = 1;
|
|
break;
|
|
case 1:
|
|
bar = 2;
|
|
break;
|
|
default:
|
|
bar = 4;
|
|
offset = (idx - 2) * board->uart_offset;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
static int pci_xircom_init(struct pci_dev *dev)
|
|
{
|
|
msleep(100);
|
|
return 0;
|
|
}
|
|
|
|
static int pci_ni8420_init(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return 0;
|
|
}
|
|
|
|
p = pci_ioremap_bar(dev, bar);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* Enable CPU Interrupt */
|
|
writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT,
|
|
p + NI8420_INT_ENABLE_REG);
|
|
|
|
iounmap(p);
|
|
return 0;
|
|
}
|
|
|
|
#define MITE_IOWBSR1_WSIZE 0xa
|
|
#define MITE_IOWBSR1_WIN_OFFSET 0x800
|
|
#define MITE_IOWBSR1_WENAB (1 << 7)
|
|
#define MITE_LCIMR1_IO_IE_0 (1 << 24)
|
|
#define MITE_LCIMR2_SET_CPU_IE (1 << 31)
|
|
#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe
|
|
|
|
static int pci_ni8430_init(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
struct pci_bus_region region;
|
|
u32 device_window;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return 0;
|
|
}
|
|
|
|
p = pci_ioremap_bar(dev, bar);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Set device window address and size in BAR0, while acknowledging that
|
|
* the resource structure may contain a translated address that differs
|
|
* from the address the device responds to.
|
|
*/
|
|
pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]);
|
|
device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
|
|
| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
|
|
writel(device_window, p + MITE_IOWBSR1);
|
|
|
|
/* Set window access to go to RAMSEL IO address space */
|
|
writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK),
|
|
p + MITE_IOWCR1);
|
|
|
|
/* Enable IO Bus Interrupt 0 */
|
|
writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1);
|
|
|
|
/* Enable CPU Interrupt */
|
|
writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2);
|
|
|
|
iounmap(p);
|
|
return 0;
|
|
}
|
|
|
|
/* UART Port Control Register */
|
|
#define NI8430_PORTCON 0x0f
|
|
#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
|
|
|
|
static int
|
|
pci_ni8430_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
struct pci_dev *dev = priv->dev;
|
|
void __iomem *p;
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
if (idx >= board->num_ports)
|
|
return 1;
|
|
|
|
bar = FL_GET_BASE(board->flags);
|
|
offset += idx * board->uart_offset;
|
|
|
|
p = pci_ioremap_bar(dev, bar);
|
|
if (!p)
|
|
return -ENOMEM;
|
|
|
|
/* enable the transceiver */
|
|
writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
|
|
p + offset + NI8430_PORTCON);
|
|
|
|
iounmap(p);
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
static int pci_netmos_9900_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar;
|
|
|
|
if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) &&
|
|
(priv->dev->subsystem_device & 0xff00) == 0x3000) {
|
|
/* netmos apparently orders BARs by datasheet layout, so serial
|
|
* ports get BARs 0 and 3 (or 1 and 4 for memmapped)
|
|
*/
|
|
bar = 3 * idx;
|
|
|
|
return setup_port(priv, port, bar, 0, board->reg_shift);
|
|
}
|
|
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
/* the 99xx series comes with a range of device IDs and a variety
|
|
* of capabilities:
|
|
*
|
|
* 9900 has varying capabilities and can cascade to sub-controllers
|
|
* (cascading should be purely internal)
|
|
* 9904 is hardwired with 4 serial ports
|
|
* 9912 and 9922 are hardwired with 2 serial ports
|
|
*/
|
|
static int pci_netmos_9900_numports(struct pci_dev *dev)
|
|
{
|
|
unsigned int c = dev->class;
|
|
unsigned int pi;
|
|
unsigned short sub_serports;
|
|
|
|
pi = c & 0xff;
|
|
|
|
if (pi == 2)
|
|
return 1;
|
|
|
|
if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
|
|
/* two possibilities: 0x30ps encodes number of parallel and
|
|
* serial ports, or 0x1000 indicates *something*. This is not
|
|
* immediately obvious, since the 2s1p+4s configuration seems
|
|
* to offer all functionality on functions 0..2, while still
|
|
* advertising the same function 3 as the 4s+2s1p config.
|
|
*/
|
|
sub_serports = dev->subsystem_device & 0xf;
|
|
if (sub_serports > 0)
|
|
return sub_serports;
|
|
|
|
pci_err(dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
|
|
return 0;
|
|
}
|
|
|
|
moan_device("unknown NetMos/Mostech program interface", dev);
|
|
return 0;
|
|
}
|
|
|
|
static int pci_netmos_init(struct pci_dev *dev)
|
|
{
|
|
/* subdevice 0x00PS means <P> parallel, <S> serial */
|
|
unsigned int num_serial = dev->subsystem_device & 0xf;
|
|
|
|
if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
|
|
(dev->device == PCI_DEVICE_ID_NETMOS_9865))
|
|
return 0;
|
|
|
|
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
|
|
dev->subsystem_device == 0x0299)
|
|
return 0;
|
|
|
|
switch (dev->device) { /* FALLTHROUGH on all */
|
|
case PCI_DEVICE_ID_NETMOS_9904:
|
|
case PCI_DEVICE_ID_NETMOS_9912:
|
|
case PCI_DEVICE_ID_NETMOS_9922:
|
|
case PCI_DEVICE_ID_NETMOS_9900:
|
|
num_serial = pci_netmos_9900_numports(dev);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (num_serial == 0) {
|
|
moan_device("unknown NetMos/Mostech device", dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return num_serial;
|
|
}
|
|
|
|
/*
|
|
* These chips are available with optionally one parallel port and up to
|
|
* two serial ports. Unfortunately they all have the same product id.
|
|
*
|
|
* Basic configuration is done over a region of 32 I/O ports. The base
|
|
* ioport is called INTA or INTC, depending on docs/other drivers.
|
|
*
|
|
* The region of the 32 I/O ports is configured in POSIO0R...
|
|
*/
|
|
|
|
/* registers */
|
|
#define ITE_887x_MISCR 0x9c
|
|
#define ITE_887x_INTCBAR 0x78
|
|
#define ITE_887x_UARTBAR 0x7c
|
|
#define ITE_887x_PS0BAR 0x10
|
|
#define ITE_887x_POSIO0 0x60
|
|
|
|
/* I/O space size */
|
|
#define ITE_887x_IOSIZE 32
|
|
/* I/O space size (bits 26-24; 8 bytes = 011b) */
|
|
#define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
|
|
/* I/O space size (bits 26-24; 32 bytes = 101b) */
|
|
#define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
|
|
/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
|
|
#define ITE_887x_POSIO_SPEED (3 << 29)
|
|
/* enable IO_Space bit */
|
|
#define ITE_887x_POSIO_ENABLE (1 << 31)
|
|
|
|
/* inta_addr are the configuration addresses of the ITE */
|
|
static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, 0x200, 0x280 };
|
|
static int pci_ite887x_init(struct pci_dev *dev)
|
|
{
|
|
int ret, i, type;
|
|
struct resource *iobase = NULL;
|
|
u32 miscr, uartbar, ioport;
|
|
|
|
/* search for the base-ioport */
|
|
for (i = 0; i < ARRAY_SIZE(inta_addr); i++) {
|
|
iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
|
|
"ite887x");
|
|
if (iobase != NULL) {
|
|
/* write POSIO0R - speed | size | ioport */
|
|
pci_write_config_dword(dev, ITE_887x_POSIO0,
|
|
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
|
|
ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
|
|
/* write INTCBAR - ioport */
|
|
pci_write_config_dword(dev, ITE_887x_INTCBAR,
|
|
inta_addr[i]);
|
|
ret = inb(inta_addr[i]);
|
|
if (ret != 0xff) {
|
|
/* ioport connected */
|
|
break;
|
|
}
|
|
release_region(iobase->start, ITE_887x_IOSIZE);
|
|
}
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(inta_addr)) {
|
|
pci_err(dev, "could not find iobase\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* start of undocumented type checking (see parport_pc.c) */
|
|
type = inb(iobase->start + 0x18) & 0x0f;
|
|
|
|
switch (type) {
|
|
case 0x2: /* ITE8871 (1P) */
|
|
case 0xa: /* ITE8875 (1P) */
|
|
ret = 0;
|
|
break;
|
|
case 0xe: /* ITE8872 (2S1P) */
|
|
ret = 2;
|
|
break;
|
|
case 0x6: /* ITE8873 (1S) */
|
|
ret = 1;
|
|
break;
|
|
case 0x8: /* ITE8874 (2S) */
|
|
ret = 2;
|
|
break;
|
|
default:
|
|
moan_device("Unknown ITE887x", dev);
|
|
ret = -ENODEV;
|
|
}
|
|
|
|
/* configure all serial ports */
|
|
for (i = 0; i < ret; i++) {
|
|
/* read the I/O port from the device */
|
|
pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
|
|
&ioport);
|
|
ioport &= 0x0000FF00; /* the actual base address */
|
|
pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
|
|
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
|
|
ITE_887x_POSIO_IOSIZE_8 | ioport);
|
|
|
|
/* write the ioport to the UARTBAR */
|
|
pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
|
|
uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
|
|
uartbar |= (ioport << (16 * i)); /* set the ioport */
|
|
pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
|
|
|
|
/* get current config */
|
|
pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
|
|
/* disable interrupts (UARTx_Routing[3:0]) */
|
|
miscr &= ~(0xf << (12 - 4 * i));
|
|
/* activate the UART (UARTx_En) */
|
|
miscr |= 1 << (23 - i);
|
|
/* write new config with activated UART */
|
|
pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
|
|
}
|
|
|
|
if (ret <= 0) {
|
|
/* the device has no UARTs if we get here */
|
|
release_region(iobase->start, ITE_887x_IOSIZE);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pci_ite887x_exit(struct pci_dev *dev)
|
|
{
|
|
u32 ioport;
|
|
/* the ioport is bit 0-15 in POSIO0R */
|
|
pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
|
|
ioport &= 0xffff;
|
|
release_region(ioport, ITE_887x_IOSIZE);
|
|
}
|
|
|
|
/*
|
|
* Oxford Semiconductor Inc.
|
|
* Check if an OxSemi device is part of the Tornado range of devices.
|
|
*/
|
|
#define PCI_VENDOR_ID_ENDRUN 0x7401
|
|
#define PCI_DEVICE_ID_ENDRUN_1588 0xe100
|
|
|
|
static bool pci_oxsemi_tornado_p(struct pci_dev *dev)
|
|
{
|
|
/* OxSemi Tornado devices are all 0xCxxx */
|
|
if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
|
|
(dev->device & 0xf000) != 0xc000)
|
|
return false;
|
|
|
|
/* EndRun devices are all 0xExxx */
|
|
if (dev->vendor == PCI_VENDOR_ID_ENDRUN &&
|
|
(dev->device & 0xf000) != 0xe000)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Determine the number of ports available on a Tornado device.
|
|
*/
|
|
static int pci_oxsemi_tornado_init(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
unsigned long deviceID;
|
|
unsigned int number_uarts = 0;
|
|
|
|
if (!pci_oxsemi_tornado_p(dev))
|
|
return 0;
|
|
|
|
p = pci_iomap(dev, 0, 5);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
deviceID = ioread32(p);
|
|
/* Tornado device */
|
|
if (deviceID == 0x07000200) {
|
|
number_uarts = ioread8(p + 4);
|
|
pci_dbg(dev, "%d ports detected on %s PCI Express device\n",
|
|
number_uarts,
|
|
dev->vendor == PCI_VENDOR_ID_ENDRUN ?
|
|
"EndRun" : "Oxford");
|
|
}
|
|
pci_iounmap(dev, p);
|
|
return number_uarts;
|
|
}
|
|
|
|
/* Tornado-specific constants for the TCR and CPR registers; see below. */
|
|
#define OXSEMI_TORNADO_TCR_MASK 0xf
|
|
#define OXSEMI_TORNADO_CPR_MASK 0x1ff
|
|
#define OXSEMI_TORNADO_CPR_MIN 0x008
|
|
#define OXSEMI_TORNADO_CPR_DEF 0x10f
|
|
|
|
/*
|
|
* Determine the oversampling rate, the clock prescaler, and the clock
|
|
* divisor for the requested baud rate. The clock rate is 62.5 MHz,
|
|
* which is four times the baud base, and the prescaler increments in
|
|
* steps of 1/8. Therefore to make calculations on integers we need
|
|
* to use a scaled clock rate, which is the baud base multiplied by 32
|
|
* (or our assumed UART clock rate multiplied by 2).
|
|
*
|
|
* The allowed oversampling rates are from 4 up to 16 inclusive (values
|
|
* from 0 to 3 inclusive map to 16). Likewise the clock prescaler allows
|
|
* values between 1.000 and 63.875 inclusive (operation for values from
|
|
* 0.000 to 0.875 has not been specified). The clock divisor is the usual
|
|
* unsigned 16-bit integer.
|
|
*
|
|
* For the most accurate baud rate we use a table of predetermined
|
|
* oversampling rates and clock prescalers that records all possible
|
|
* products of the two parameters in the range from 4 up to 255 inclusive,
|
|
* and additionally 335 for the 1500000bps rate, with the prescaler scaled
|
|
* by 8. The table is sorted by the decreasing value of the oversampling
|
|
* rate and ties are resolved by sorting by the decreasing value of the
|
|
* product. This way preference is given to higher oversampling rates.
|
|
*
|
|
* We iterate over the table and choose the product of an oversampling
|
|
* rate and a clock prescaler that gives the lowest integer division
|
|
* result deviation, or if an exact integer divider is found we stop
|
|
* looking for it right away. We do some fixup if the resulting clock
|
|
* divisor required would be out of its unsigned 16-bit integer range.
|
|
*
|
|
* Finally we abuse the supposed fractional part returned to encode the
|
|
* 4-bit value of the oversampling rate and the 9-bit value of the clock
|
|
* prescaler which will end up in the TCR and CPR/CPR2 registers.
|
|
*/
|
|
static unsigned int pci_oxsemi_tornado_get_divisor(struct uart_port *port,
|
|
unsigned int baud,
|
|
unsigned int *frac)
|
|
{
|
|
static u8 p[][2] = {
|
|
{ 16, 14, }, { 16, 13, }, { 16, 12, }, { 16, 11, },
|
|
{ 16, 10, }, { 16, 9, }, { 16, 8, }, { 15, 17, },
|
|
{ 15, 16, }, { 15, 15, }, { 15, 14, }, { 15, 13, },
|
|
{ 15, 12, }, { 15, 11, }, { 15, 10, }, { 15, 9, },
|
|
{ 15, 8, }, { 14, 18, }, { 14, 17, }, { 14, 14, },
|
|
{ 14, 13, }, { 14, 12, }, { 14, 11, }, { 14, 10, },
|
|
{ 14, 9, }, { 14, 8, }, { 13, 19, }, { 13, 18, },
|
|
{ 13, 17, }, { 13, 13, }, { 13, 12, }, { 13, 11, },
|
|
{ 13, 10, }, { 13, 9, }, { 13, 8, }, { 12, 19, },
|
|
{ 12, 18, }, { 12, 17, }, { 12, 11, }, { 12, 9, },
|
|
{ 12, 8, }, { 11, 23, }, { 11, 22, }, { 11, 21, },
|
|
{ 11, 20, }, { 11, 19, }, { 11, 18, }, { 11, 17, },
|
|
{ 11, 11, }, { 11, 10, }, { 11, 9, }, { 11, 8, },
|
|
{ 10, 25, }, { 10, 23, }, { 10, 20, }, { 10, 19, },
|
|
{ 10, 17, }, { 10, 10, }, { 10, 9, }, { 10, 8, },
|
|
{ 9, 27, }, { 9, 23, }, { 9, 21, }, { 9, 19, },
|
|
{ 9, 18, }, { 9, 17, }, { 9, 9, }, { 9, 8, },
|
|
{ 8, 31, }, { 8, 29, }, { 8, 23, }, { 8, 19, },
|
|
{ 8, 17, }, { 8, 8, }, { 7, 35, }, { 7, 31, },
|
|
{ 7, 29, }, { 7, 25, }, { 7, 23, }, { 7, 21, },
|
|
{ 7, 19, }, { 7, 17, }, { 7, 15, }, { 7, 14, },
|
|
{ 7, 13, }, { 7, 12, }, { 7, 11, }, { 7, 10, },
|
|
{ 7, 9, }, { 7, 8, }, { 6, 41, }, { 6, 37, },
|
|
{ 6, 31, }, { 6, 29, }, { 6, 23, }, { 6, 19, },
|
|
{ 6, 17, }, { 6, 13, }, { 6, 11, }, { 6, 10, },
|
|
{ 6, 9, }, { 6, 8, }, { 5, 67, }, { 5, 47, },
|
|
{ 5, 43, }, { 5, 41, }, { 5, 37, }, { 5, 31, },
|
|
{ 5, 29, }, { 5, 25, }, { 5, 23, }, { 5, 19, },
|
|
{ 5, 17, }, { 5, 15, }, { 5, 13, }, { 5, 11, },
|
|
{ 5, 10, }, { 5, 9, }, { 5, 8, }, { 4, 61, },
|
|
{ 4, 59, }, { 4, 53, }, { 4, 47, }, { 4, 43, },
|
|
{ 4, 41, }, { 4, 37, }, { 4, 31, }, { 4, 29, },
|
|
{ 4, 23, }, { 4, 19, }, { 4, 17, }, { 4, 13, },
|
|
{ 4, 9, }, { 4, 8, },
|
|
};
|
|
/* Scale the quotient for comparison to get the fractional part. */
|
|
const unsigned int quot_scale = 65536;
|
|
unsigned int sclk = port->uartclk * 2;
|
|
unsigned int sdiv = DIV_ROUND_CLOSEST(sclk, baud);
|
|
unsigned int best_squot;
|
|
unsigned int squot;
|
|
unsigned int quot;
|
|
u16 cpr;
|
|
u8 tcr;
|
|
int i;
|
|
|
|
/* Old custom speed handling. */
|
|
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) {
|
|
unsigned int cust_div = port->custom_divisor;
|
|
|
|
quot = cust_div & UART_DIV_MAX;
|
|
tcr = (cust_div >> 16) & OXSEMI_TORNADO_TCR_MASK;
|
|
cpr = (cust_div >> 20) & OXSEMI_TORNADO_CPR_MASK;
|
|
if (cpr < OXSEMI_TORNADO_CPR_MIN)
|
|
cpr = OXSEMI_TORNADO_CPR_DEF;
|
|
} else {
|
|
best_squot = quot_scale;
|
|
for (i = 0; i < ARRAY_SIZE(p); i++) {
|
|
unsigned int spre;
|
|
unsigned int srem;
|
|
u8 cp;
|
|
u8 tc;
|
|
|
|
tc = p[i][0];
|
|
cp = p[i][1];
|
|
spre = tc * cp;
|
|
|
|
srem = sdiv % spre;
|
|
if (srem > spre / 2)
|
|
srem = spre - srem;
|
|
squot = DIV_ROUND_CLOSEST(srem * quot_scale, spre);
|
|
|
|
if (srem == 0) {
|
|
tcr = tc;
|
|
cpr = cp;
|
|
quot = sdiv / spre;
|
|
break;
|
|
} else if (squot < best_squot) {
|
|
best_squot = squot;
|
|
tcr = tc;
|
|
cpr = cp;
|
|
quot = DIV_ROUND_CLOSEST(sdiv, spre);
|
|
}
|
|
}
|
|
while (tcr <= (OXSEMI_TORNADO_TCR_MASK + 1) >> 1 &&
|
|
quot % 2 == 0) {
|
|
quot >>= 1;
|
|
tcr <<= 1;
|
|
}
|
|
while (quot > UART_DIV_MAX) {
|
|
if (tcr <= (OXSEMI_TORNADO_TCR_MASK + 1) >> 1) {
|
|
quot >>= 1;
|
|
tcr <<= 1;
|
|
} else if (cpr <= OXSEMI_TORNADO_CPR_MASK >> 1) {
|
|
quot >>= 1;
|
|
cpr <<= 1;
|
|
} else {
|
|
quot = quot * cpr / OXSEMI_TORNADO_CPR_MASK;
|
|
cpr = OXSEMI_TORNADO_CPR_MASK;
|
|
}
|
|
}
|
|
}
|
|
|
|
*frac = (cpr << 8) | (tcr & OXSEMI_TORNADO_TCR_MASK);
|
|
return quot;
|
|
}
|
|
|
|
/*
|
|
* Set the oversampling rate in the transmitter clock cycle register (TCR),
|
|
* the clock prescaler in the clock prescaler register (CPR and CPR2), and
|
|
* the clock divisor in the divisor latch (DLL and DLM). Note that for
|
|
* backwards compatibility any write to CPR clears CPR2 and therefore CPR
|
|
* has to be written first, followed by CPR2, which occupies the location
|
|
* of CKS used with earlier UART designs.
|
|
*/
|
|
static void pci_oxsemi_tornado_set_divisor(struct uart_port *port,
|
|
unsigned int baud,
|
|
unsigned int quot,
|
|
unsigned int quot_frac)
|
|
{
|
|
struct uart_8250_port *up = up_to_u8250p(port);
|
|
u8 cpr2 = quot_frac >> 16;
|
|
u8 cpr = quot_frac >> 8;
|
|
u8 tcr = quot_frac;
|
|
|
|
serial_icr_write(up, UART_TCR, tcr);
|
|
serial_icr_write(up, UART_CPR, cpr);
|
|
serial_icr_write(up, UART_CKS, cpr2);
|
|
serial8250_do_set_divisor(port, baud, quot, 0);
|
|
}
|
|
|
|
/*
|
|
* For Tornado devices we force MCR[7] set for the Divide-by-M N/8 baud rate
|
|
* generator prescaler (CPR and CPR2). Otherwise no prescaler would be used.
|
|
*/
|
|
static void pci_oxsemi_tornado_set_mctrl(struct uart_port *port,
|
|
unsigned int mctrl)
|
|
{
|
|
struct uart_8250_port *up = up_to_u8250p(port);
|
|
|
|
up->mcr |= UART_MCR_CLKSEL;
|
|
serial8250_do_set_mctrl(port, mctrl);
|
|
}
|
|
|
|
/*
|
|
* We require EFR features for clock programming, so set UPF_FULL_PROBE
|
|
* for full probing regardless of CONFIG_SERIAL_8250_16550A_VARIANTS setting.
|
|
*/
|
|
static int pci_oxsemi_tornado_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *up, int idx)
|
|
{
|
|
struct pci_dev *dev = priv->dev;
|
|
|
|
if (pci_oxsemi_tornado_p(dev)) {
|
|
up->port.flags |= UPF_FULL_PROBE;
|
|
up->port.get_divisor = pci_oxsemi_tornado_get_divisor;
|
|
up->port.set_divisor = pci_oxsemi_tornado_set_divisor;
|
|
up->port.set_mctrl = pci_oxsemi_tornado_set_mctrl;
|
|
}
|
|
|
|
return pci_default_setup(priv, board, up, idx);
|
|
}
|
|
|
|
static int pci_asix_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
port->bugs |= UART_BUG_PARITY;
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
#define QPCR_TEST_FOR1 0x3F
|
|
#define QPCR_TEST_GET1 0x00
|
|
#define QPCR_TEST_FOR2 0x40
|
|
#define QPCR_TEST_GET2 0x40
|
|
#define QPCR_TEST_FOR3 0x80
|
|
#define QPCR_TEST_GET3 0x40
|
|
#define QPCR_TEST_FOR4 0xC0
|
|
#define QPCR_TEST_GET4 0x80
|
|
|
|
#define QOPR_CLOCK_X1 0x0000
|
|
#define QOPR_CLOCK_X2 0x0001
|
|
#define QOPR_CLOCK_X4 0x0002
|
|
#define QOPR_CLOCK_X8 0x0003
|
|
#define QOPR_CLOCK_RATE_MASK 0x0003
|
|
|
|
/* Quatech devices have their own extra interface features */
|
|
static struct pci_device_id quatech_cards[] = {
|
|
{ PCI_DEVICE_DATA(QUATECH, QSC100, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSC100, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSC100E, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSC200, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSC200E, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, ESC100D, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, ESC100M, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, QSCP100, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSCP100, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, QSCP200, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSCP200, 1) },
|
|
{ PCI_DEVICE_DATA(QUATECH, ESCLP100, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, QSCLP100, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSCLP100, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, SSCLP100, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, QSCLP200, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, DSCLP200, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, SSCLP200, 0) },
|
|
{ PCI_DEVICE_DATA(QUATECH, SPPXP_100, 0) },
|
|
{ 0, }
|
|
};
|
|
|
|
static int pci_quatech_rqopr(struct uart_8250_port *port)
|
|
{
|
|
unsigned long base = port->port.iobase;
|
|
u8 LCR, val;
|
|
|
|
LCR = inb(base + UART_LCR);
|
|
outb(0xBF, base + UART_LCR);
|
|
val = inb(base + UART_SCR);
|
|
outb(LCR, base + UART_LCR);
|
|
return val;
|
|
}
|
|
|
|
static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr)
|
|
{
|
|
unsigned long base = port->port.iobase;
|
|
u8 LCR;
|
|
|
|
LCR = inb(base + UART_LCR);
|
|
outb(0xBF, base + UART_LCR);
|
|
inb(base + UART_SCR);
|
|
outb(qopr, base + UART_SCR);
|
|
outb(LCR, base + UART_LCR);
|
|
}
|
|
|
|
static int pci_quatech_rqmcr(struct uart_8250_port *port)
|
|
{
|
|
unsigned long base = port->port.iobase;
|
|
u8 LCR, val, qmcr;
|
|
|
|
LCR = inb(base + UART_LCR);
|
|
outb(0xBF, base + UART_LCR);
|
|
val = inb(base + UART_SCR);
|
|
outb(val | 0x10, base + UART_SCR);
|
|
qmcr = inb(base + UART_MCR);
|
|
outb(val, base + UART_SCR);
|
|
outb(LCR, base + UART_LCR);
|
|
|
|
return qmcr;
|
|
}
|
|
|
|
static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr)
|
|
{
|
|
unsigned long base = port->port.iobase;
|
|
u8 LCR, val;
|
|
|
|
LCR = inb(base + UART_LCR);
|
|
outb(0xBF, base + UART_LCR);
|
|
val = inb(base + UART_SCR);
|
|
outb(val | 0x10, base + UART_SCR);
|
|
outb(qmcr, base + UART_MCR);
|
|
outb(val, base + UART_SCR);
|
|
outb(LCR, base + UART_LCR);
|
|
}
|
|
|
|
static int pci_quatech_has_qmcr(struct uart_8250_port *port)
|
|
{
|
|
unsigned long base = port->port.iobase;
|
|
u8 LCR, val;
|
|
|
|
LCR = inb(base + UART_LCR);
|
|
outb(0xBF, base + UART_LCR);
|
|
val = inb(base + UART_SCR);
|
|
if (val & 0x20) {
|
|
outb(0x80, UART_LCR);
|
|
if (!(inb(UART_SCR) & 0x20)) {
|
|
outb(LCR, base + UART_LCR);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pci_quatech_test(struct uart_8250_port *port)
|
|
{
|
|
u8 reg, qopr;
|
|
|
|
qopr = pci_quatech_rqopr(port);
|
|
pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
|
|
reg = pci_quatech_rqopr(port) & 0xC0;
|
|
if (reg != QPCR_TEST_GET1)
|
|
return -EINVAL;
|
|
pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2);
|
|
reg = pci_quatech_rqopr(port) & 0xC0;
|
|
if (reg != QPCR_TEST_GET2)
|
|
return -EINVAL;
|
|
pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3);
|
|
reg = pci_quatech_rqopr(port) & 0xC0;
|
|
if (reg != QPCR_TEST_GET3)
|
|
return -EINVAL;
|
|
pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4);
|
|
reg = pci_quatech_rqopr(port) & 0xC0;
|
|
if (reg != QPCR_TEST_GET4)
|
|
return -EINVAL;
|
|
|
|
pci_quatech_wqopr(port, qopr);
|
|
return 0;
|
|
}
|
|
|
|
static int pci_quatech_clock(struct uart_8250_port *port)
|
|
{
|
|
u8 qopr, reg, set;
|
|
unsigned long clock;
|
|
|
|
if (pci_quatech_test(port) < 0)
|
|
return 1843200;
|
|
|
|
qopr = pci_quatech_rqopr(port);
|
|
|
|
pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8);
|
|
reg = pci_quatech_rqopr(port);
|
|
if (reg & QOPR_CLOCK_X8) {
|
|
clock = 1843200;
|
|
goto out;
|
|
}
|
|
pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8);
|
|
reg = pci_quatech_rqopr(port);
|
|
if (!(reg & QOPR_CLOCK_X8)) {
|
|
clock = 1843200;
|
|
goto out;
|
|
}
|
|
reg &= QOPR_CLOCK_X8;
|
|
if (reg == QOPR_CLOCK_X2) {
|
|
clock = 3685400;
|
|
set = QOPR_CLOCK_X2;
|
|
} else if (reg == QOPR_CLOCK_X4) {
|
|
clock = 7372800;
|
|
set = QOPR_CLOCK_X4;
|
|
} else if (reg == QOPR_CLOCK_X8) {
|
|
clock = 14745600;
|
|
set = QOPR_CLOCK_X8;
|
|
} else {
|
|
clock = 1843200;
|
|
set = QOPR_CLOCK_X1;
|
|
}
|
|
qopr &= ~QOPR_CLOCK_RATE_MASK;
|
|
qopr |= set;
|
|
|
|
out:
|
|
pci_quatech_wqopr(port, qopr);
|
|
return clock;
|
|
}
|
|
|
|
static int pci_quatech_rs422(struct uart_8250_port *port)
|
|
{
|
|
u8 qmcr;
|
|
int rs422 = 0;
|
|
|
|
if (!pci_quatech_has_qmcr(port))
|
|
return 0;
|
|
qmcr = pci_quatech_rqmcr(port);
|
|
pci_quatech_wqmcr(port, 0xFF);
|
|
if (pci_quatech_rqmcr(port))
|
|
rs422 = 1;
|
|
pci_quatech_wqmcr(port, qmcr);
|
|
return rs422;
|
|
}
|
|
|
|
static int pci_quatech_init(struct pci_dev *dev)
|
|
{
|
|
const struct pci_device_id *match;
|
|
bool amcc = false;
|
|
|
|
match = pci_match_id(quatech_cards, dev);
|
|
if (match)
|
|
amcc = match->driver_data;
|
|
else
|
|
pci_err(dev, "unknown port type '0x%04X'.\n", dev->device);
|
|
|
|
if (amcc) {
|
|
unsigned long base = pci_resource_start(dev, 0);
|
|
if (base) {
|
|
u32 tmp;
|
|
|
|
outl(inl(base + 0x38) | 0x00002000, base + 0x38);
|
|
tmp = inl(base + 0x3c);
|
|
outl(tmp | 0x01000000, base + 0x3c);
|
|
outl(tmp & ~0x01000000, base + 0x3c);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pci_quatech_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
/* Needed by pci_quatech calls below */
|
|
port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags));
|
|
/* Set up the clocking */
|
|
port->port.uartclk = pci_quatech_clock(port);
|
|
/* For now just warn about RS422 */
|
|
if (pci_quatech_rs422(port))
|
|
pci_warn(priv->dev, "software control of RS422 features not currently supported.\n");
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
static int pci_default_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset, maxnr;
|
|
|
|
bar = FL_GET_BASE(board->flags);
|
|
if (board->flags & FL_BASE_BARS)
|
|
bar += idx;
|
|
else
|
|
offset += idx * board->uart_offset;
|
|
|
|
maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
|
|
(board->reg_shift + 3);
|
|
|
|
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
|
|
return 1;
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
static int
|
|
ce4100_serial_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
int ret;
|
|
|
|
ret = setup_port(priv, port, idx, 0, board->reg_shift);
|
|
port->port.iotype = UPIO_MEM32;
|
|
port->port.type = PORT_XSCALE;
|
|
port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
|
|
port->port.regshift = 2;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
pci_omegapci_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
return setup_port(priv, port, 2, idx * 8, 0);
|
|
}
|
|
|
|
static int
|
|
pci_brcm_trumanage_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
int ret = pci_default_setup(priv, board, port, idx);
|
|
|
|
port->port.type = PORT_BRCM_TRUMANAGE;
|
|
port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
|
|
return ret;
|
|
}
|
|
|
|
/* RTS will control by MCR if this bit is 0 */
|
|
#define FINTEK_RTS_CONTROL_BY_HW BIT(4)
|
|
/* only worked with FINTEK_RTS_CONTROL_BY_HW on */
|
|
#define FINTEK_RTS_INVERT BIT(5)
|
|
|
|
/* We should do proper H/W transceiver setting before change to RS485 mode */
|
|
static int pci_fintek_rs485_config(struct uart_port *port, struct ktermios *termios,
|
|
struct serial_rs485 *rs485)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(port->dev);
|
|
u8 setting;
|
|
u8 *index = (u8 *) port->private_data;
|
|
|
|
pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting);
|
|
|
|
if (rs485->flags & SER_RS485_ENABLED) {
|
|
/* Enable RTS H/W control mode */
|
|
setting |= FINTEK_RTS_CONTROL_BY_HW;
|
|
|
|
if (rs485->flags & SER_RS485_RTS_ON_SEND) {
|
|
/* RTS driving high on TX */
|
|
setting &= ~FINTEK_RTS_INVERT;
|
|
} else {
|
|
/* RTS driving low on TX */
|
|
setting |= FINTEK_RTS_INVERT;
|
|
}
|
|
} else {
|
|
/* Disable RTS H/W control mode */
|
|
setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT);
|
|
}
|
|
|
|
pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct serial_rs485 pci_fintek_rs485_supported = {
|
|
.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
|
|
/* F81504/508/512 does not support RTS delay before or after send */
|
|
};
|
|
|
|
static int pci_fintek_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
struct pci_dev *pdev = priv->dev;
|
|
u8 *data;
|
|
u8 config_base;
|
|
u16 iobase;
|
|
|
|
config_base = 0x40 + 0x08 * idx;
|
|
|
|
/* Get the io address from configuration space */
|
|
pci_read_config_word(pdev, config_base + 4, &iobase);
|
|
|
|
pci_dbg(pdev, "idx=%d iobase=0x%x", idx, iobase);
|
|
|
|
port->port.iotype = UPIO_PORT;
|
|
port->port.iobase = iobase;
|
|
port->port.rs485_config = pci_fintek_rs485_config;
|
|
port->port.rs485_supported = pci_fintek_rs485_supported;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
/* preserve index in PCI configuration space */
|
|
*data = idx;
|
|
port->port.private_data = data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_fintek_init(struct pci_dev *dev)
|
|
{
|
|
unsigned long iobase;
|
|
u32 max_port, i;
|
|
resource_size_t bar_data[3];
|
|
u8 config_base;
|
|
struct serial_private *priv = pci_get_drvdata(dev);
|
|
|
|
if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) ||
|
|
!(pci_resource_flags(dev, 4) & IORESOURCE_IO) ||
|
|
!(pci_resource_flags(dev, 3) & IORESOURCE_IO))
|
|
return -ENODEV;
|
|
|
|
switch (dev->device) {
|
|
case 0x1104: /* 4 ports */
|
|
case 0x1108: /* 8 ports */
|
|
max_port = dev->device & 0xff;
|
|
break;
|
|
case 0x1112: /* 12 ports */
|
|
max_port = 12;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the io address dispatch from the BIOS */
|
|
bar_data[0] = pci_resource_start(dev, 5);
|
|
bar_data[1] = pci_resource_start(dev, 4);
|
|
bar_data[2] = pci_resource_start(dev, 3);
|
|
|
|
for (i = 0; i < max_port; ++i) {
|
|
/* UART0 configuration offset start from 0x40 */
|
|
config_base = 0x40 + 0x08 * i;
|
|
|
|
/* Calculate Real IO Port */
|
|
iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8;
|
|
|
|
/* Enable UART I/O port */
|
|
pci_write_config_byte(dev, config_base + 0x00, 0x01);
|
|
|
|
/* Select 128-byte FIFO and 8x FIFO threshold */
|
|
pci_write_config_byte(dev, config_base + 0x01, 0x33);
|
|
|
|
/* LSB UART */
|
|
pci_write_config_byte(dev, config_base + 0x04,
|
|
(u8)(iobase & 0xff));
|
|
|
|
/* MSB UART */
|
|
pci_write_config_byte(dev, config_base + 0x05,
|
|
(u8)((iobase & 0xff00) >> 8));
|
|
|
|
pci_write_config_byte(dev, config_base + 0x06, dev->irq);
|
|
|
|
if (!priv) {
|
|
/* First init without port data
|
|
* force init to RS232 Mode
|
|
*/
|
|
pci_write_config_byte(dev, config_base + 0x07, 0x01);
|
|
}
|
|
}
|
|
|
|
return max_port;
|
|
}
|
|
|
|
static void f815xxa_mem_serial_out(struct uart_port *p, int offset, int value)
|
|
{
|
|
struct f815xxa_data *data = p->private_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
writeb(value, p->membase + offset);
|
|
readb(p->membase + UART_SCR); /* Dummy read for flush pcie tx queue */
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
}
|
|
|
|
static int pci_fintek_f815xxa_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
struct pci_dev *pdev = priv->dev;
|
|
struct f815xxa_data *data;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->idx = idx;
|
|
spin_lock_init(&data->lock);
|
|
|
|
port->port.private_data = data;
|
|
port->port.iotype = UPIO_MEM;
|
|
port->port.flags |= UPF_IOREMAP;
|
|
port->port.mapbase = pci_resource_start(pdev, 0) + 8 * idx;
|
|
port->port.serial_out = f815xxa_mem_serial_out;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_fintek_f815xxa_init(struct pci_dev *dev)
|
|
{
|
|
u32 max_port, i;
|
|
int config_base;
|
|
|
|
if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM))
|
|
return -ENODEV;
|
|
|
|
switch (dev->device) {
|
|
case 0x1204: /* 4 ports */
|
|
case 0x1208: /* 8 ports */
|
|
max_port = dev->device & 0xff;
|
|
break;
|
|
case 0x1212: /* 12 ports */
|
|
max_port = 12;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set to mmio decode */
|
|
pci_write_config_byte(dev, 0x209, 0x40);
|
|
|
|
for (i = 0; i < max_port; ++i) {
|
|
/* UART0 configuration offset start from 0x2A0 */
|
|
config_base = 0x2A0 + 0x08 * i;
|
|
|
|
/* Select 128-byte FIFO and 8x FIFO threshold */
|
|
pci_write_config_byte(dev, config_base + 0x01, 0x33);
|
|
|
|
/* Enable UART I/O port */
|
|
pci_write_config_byte(dev, config_base + 0, 0x01);
|
|
}
|
|
|
|
return max_port;
|
|
}
|
|
|
|
static int skip_tx_en_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
port->port.quirks |= UPQ_NO_TXEN_TEST;
|
|
pci_dbg(priv->dev,
|
|
"serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
|
|
priv->dev->vendor, priv->dev->device,
|
|
priv->dev->subsystem_vendor, priv->dev->subsystem_device);
|
|
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
static void kt_handle_break(struct uart_port *p)
|
|
{
|
|
struct uart_8250_port *up = up_to_u8250p(p);
|
|
/*
|
|
* On receipt of a BI, serial device in Intel ME (Intel
|
|
* management engine) needs to have its fifos cleared for sane
|
|
* SOL (Serial Over Lan) output.
|
|
*/
|
|
serial8250_clear_and_reinit_fifos(up);
|
|
}
|
|
|
|
static unsigned int kt_serial_in(struct uart_port *p, int offset)
|
|
{
|
|
struct uart_8250_port *up = up_to_u8250p(p);
|
|
unsigned int val;
|
|
|
|
/*
|
|
* When the Intel ME (management engine) gets reset its serial
|
|
* port registers could return 0 momentarily. Functions like
|
|
* serial8250_console_write, read and save the IER, perform
|
|
* some operation and then restore it. In order to avoid
|
|
* setting IER register inadvertently to 0, if the value read
|
|
* is 0, double check with ier value in uart_8250_port and use
|
|
* that instead. up->ier should be the same value as what is
|
|
* currently configured.
|
|
*/
|
|
val = inb(p->iobase + offset);
|
|
if (offset == UART_IER) {
|
|
if (val == 0)
|
|
val = up->ier;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static int kt_serial_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
port->port.flags |= UPF_BUG_THRE;
|
|
port->port.serial_in = kt_serial_in;
|
|
port->port.handle_break = kt_handle_break;
|
|
return skip_tx_en_setup(priv, board, port, idx);
|
|
}
|
|
|
|
static int pci_eg20t_init(struct pci_dev *dev)
|
|
{
|
|
#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
|
|
return -ENODEV;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
pci_wch_ch353_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
port->port.flags |= UPF_FIXED_TYPE;
|
|
port->port.type = PORT_16550A;
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
static int
|
|
pci_wch_ch355_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
port->port.flags |= UPF_FIXED_TYPE;
|
|
port->port.type = PORT_16550A;
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
static int
|
|
pci_wch_ch38x_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
port->port.flags |= UPF_FIXED_TYPE;
|
|
port->port.type = PORT_16850;
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
|
|
#define CH384_XINT_ENABLE_REG 0xEB
|
|
#define CH384_XINT_ENABLE_BIT 0x02
|
|
|
|
static int pci_wch_ch38x_init(struct pci_dev *dev)
|
|
{
|
|
int max_port;
|
|
unsigned long iobase;
|
|
|
|
|
|
switch (dev->device) {
|
|
case 0x3853: /* 8 ports */
|
|
max_port = 8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
iobase = pci_resource_start(dev, 0);
|
|
outb(CH384_XINT_ENABLE_BIT, iobase + CH384_XINT_ENABLE_REG);
|
|
|
|
return max_port;
|
|
}
|
|
|
|
static void pci_wch_ch38x_exit(struct pci_dev *dev)
|
|
{
|
|
unsigned long iobase;
|
|
|
|
iobase = pci_resource_start(dev, 0);
|
|
outb(0x0, iobase + CH384_XINT_ENABLE_REG);
|
|
}
|
|
|
|
|
|
static int
|
|
pci_sunix_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
int bar;
|
|
int offset;
|
|
|
|
port->port.flags |= UPF_FIXED_TYPE;
|
|
port->port.type = PORT_SUNIX;
|
|
|
|
if (idx < 4) {
|
|
bar = 0;
|
|
offset = idx * board->uart_offset;
|
|
} else {
|
|
bar = 1;
|
|
idx -= 4;
|
|
idx = div_s64_rem(idx, 4, &offset);
|
|
offset = idx * 64 + offset * board->uart_offset;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, 0);
|
|
}
|
|
|
|
static int
|
|
pci_moxa_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_8250_port *port, int idx)
|
|
{
|
|
unsigned int bar = FL_GET_BASE(board->flags);
|
|
int offset;
|
|
|
|
if (board->num_ports == 4 && idx == 3)
|
|
offset = 7 * board->uart_offset;
|
|
else
|
|
offset = idx * board->uart_offset;
|
|
|
|
return setup_port(priv, port, bar, offset, 0);
|
|
}
|
|
|
|
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
|
|
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
|
|
#define PCI_DEVICE_ID_OCTPRO 0x0001
|
|
#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
|
|
#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
|
|
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
|
|
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
|
|
#define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500
|
|
#define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530
|
|
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
|
|
#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
|
|
#define PCI_DEVICE_ID_ADVANTECH_PCI1600 0x1600
|
|
#define PCI_DEVICE_ID_ADVANTECH_PCI1600_1611 0x1611
|
|
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
|
|
#define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618
|
|
#define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618
|
|
#define PCI_DEVICE_ID_TITAN_200I 0x8028
|
|
#define PCI_DEVICE_ID_TITAN_400I 0x8048
|
|
#define PCI_DEVICE_ID_TITAN_800I 0x8088
|
|
#define PCI_DEVICE_ID_TITAN_800EH 0xA007
|
|
#define PCI_DEVICE_ID_TITAN_800EHB 0xA008
|
|
#define PCI_DEVICE_ID_TITAN_400EH 0xA009
|
|
#define PCI_DEVICE_ID_TITAN_100E 0xA010
|
|
#define PCI_DEVICE_ID_TITAN_200E 0xA012
|
|
#define PCI_DEVICE_ID_TITAN_400E 0xA013
|
|
#define PCI_DEVICE_ID_TITAN_800E 0xA014
|
|
#define PCI_DEVICE_ID_TITAN_200EI 0xA016
|
|
#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
|
|
#define PCI_DEVICE_ID_TITAN_200V3 0xA306
|
|
#define PCI_DEVICE_ID_TITAN_400V3 0xA310
|
|
#define PCI_DEVICE_ID_TITAN_410V3 0xA312
|
|
#define PCI_DEVICE_ID_TITAN_800V3 0xA314
|
|
#define PCI_DEVICE_ID_TITAN_800V3B 0xA315
|
|
#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
|
|
#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
|
|
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
|
|
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
|
|
#define PCI_VENDOR_ID_WCH 0x4348
|
|
#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
|
|
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
|
|
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
|
|
#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053
|
|
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
|
|
#define PCI_DEVICE_ID_WCH_CH355_4S 0x7173
|
|
#define PCI_VENDOR_ID_AGESTAR 0x5372
|
|
#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
|
|
#define PCI_VENDOR_ID_ASIX 0x9710
|
|
#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
|
|
#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
|
|
|
|
#define PCIE_VENDOR_ID_WCH 0x1c00
|
|
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
|
|
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
|
|
#define PCIE_DEVICE_ID_WCH_CH384_8S 0x3853
|
|
#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253
|
|
|
|
#define PCI_DEVICE_ID_MOXA_CP102E 0x1024
|
|
#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025
|
|
#define PCI_DEVICE_ID_MOXA_CP104EL_A 0x1045
|
|
#define PCI_DEVICE_ID_MOXA_CP114EL 0x1144
|
|
#define PCI_DEVICE_ID_MOXA_CP116E_A_A 0x1160
|
|
#define PCI_DEVICE_ID_MOXA_CP116E_A_B 0x1161
|
|
#define PCI_DEVICE_ID_MOXA_CP118EL_A 0x1182
|
|
#define PCI_DEVICE_ID_MOXA_CP118E_A_I 0x1183
|
|
#define PCI_DEVICE_ID_MOXA_CP132EL 0x1322
|
|
#define PCI_DEVICE_ID_MOXA_CP134EL_A 0x1342
|
|
#define PCI_DEVICE_ID_MOXA_CP138E_A 0x1381
|
|
#define PCI_DEVICE_ID_MOXA_CP168EL_A 0x1683
|
|
|
|
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
|
|
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
|
|
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
|
|
|
|
/*
|
|
* Master list of serial port init/setup/exit quirks.
|
|
* This does not describe the general nature of the port.
|
|
* (ie, baud base, number and location of ports, etc)
|
|
*
|
|
* This list is ordered alphabetically by vendor then device.
|
|
* Specific entries must come before more generic entries.
|
|
*/
|
|
static struct pci_serial_quirk pci_serial_quirks[] = {
|
|
/*
|
|
* ADDI-DATA GmbH communication cards <info@addi-data.com>
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_AMCC,
|
|
.device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = addidata_apci7800_setup,
|
|
},
|
|
/*
|
|
* AFAVLAB cards - these may be called via parport_serial
|
|
* It is not clear whether this applies to all products.
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_AFAVLAB,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = afavlab_setup,
|
|
},
|
|
/*
|
|
* HP Diva
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_HP,
|
|
.device = PCI_DEVICE_ID_HP_DIVA,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_hp_diva_init,
|
|
.setup = pci_hp_diva_setup,
|
|
},
|
|
/*
|
|
* HPE PCI serial device
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_HP_3PAR,
|
|
.device = PCI_DEVICE_ID_HPE_PCI_SERIAL,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_hp_diva_setup,
|
|
},
|
|
/*
|
|
* Intel
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_80960_RP,
|
|
.subvendor = 0xe4bf,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_inteli960ni_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_8257X_SOL,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = skip_tx_en_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_82573L_SOL,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = skip_tx_en_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_82573E_SOL,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = skip_tx_en_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_CE4100_UART,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = ce4100_serial_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = kt_serial_setup,
|
|
},
|
|
/*
|
|
* ITE
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ITE,
|
|
.device = PCI_DEVICE_ID_ITE_8872,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ite887x_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ite887x_exit,
|
|
},
|
|
/*
|
|
* National Instruments
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI23216,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2328,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2324,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2322,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2324I,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2322I,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_23216,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_2328,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_2324,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_2322,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8422_2324,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8422_2322,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_ni8420_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8430_init,
|
|
.setup = pci_ni8430_setup,
|
|
.exit = pci_ni8430_exit,
|
|
},
|
|
/* Quatech */
|
|
{
|
|
.vendor = PCI_VENDOR_ID_QUATECH,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_quatech_init,
|
|
.setup = pci_quatech_setup,
|
|
},
|
|
/*
|
|
* Panacom
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PANACOM,
|
|
.device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_plx9050_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PANACOM,
|
|
.device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_plx9050_exit,
|
|
},
|
|
/*
|
|
* PLX
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_9050,
|
|
.subvendor = PCI_SUBVENDOR_ID_EXSYS,
|
|
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_plx9050_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_9050,
|
|
.subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
|
|
.subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_plx9050_exit,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_ROMULUS,
|
|
.subvendor = PCI_VENDOR_ID_PLX,
|
|
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = pci_plx9050_exit,
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., PMC-OCTALPRO 232
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = sbs_exit,
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., PMC-OCTALPRO 422
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = sbs_exit,
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., P-Octal 232
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_POCTAL232,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = sbs_exit,
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., P-Octal 422
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_POCTAL422,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = sbs_exit,
|
|
},
|
|
/*
|
|
* SIIG cards - these may be called via parport_serial
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SIIG,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_siig_init,
|
|
.setup = pci_siig_setup,
|
|
},
|
|
/*
|
|
* Titan cards
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TITAN,
|
|
.device = PCI_DEVICE_ID_TITAN_400L,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = titan_400l_800l_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TITAN,
|
|
.device = PCI_DEVICE_ID_TITAN_800L,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = titan_400l_800l_setup,
|
|
},
|
|
/*
|
|
* Timedia cards
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TIMEDIA,
|
|
.device = PCI_DEVICE_ID_TIMEDIA_1889,
|
|
.subvendor = PCI_VENDOR_ID_TIMEDIA,
|
|
.subdevice = PCI_ANY_ID,
|
|
.probe = pci_timedia_probe,
|
|
.init = pci_timedia_init,
|
|
.setup = pci_timedia_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TIMEDIA,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_timedia_setup,
|
|
},
|
|
/*
|
|
* Sunix PCI serial boards
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SUNIX,
|
|
.device = PCI_DEVICE_ID_SUNIX_1999,
|
|
.subvendor = PCI_VENDOR_ID_SUNIX,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_sunix_setup,
|
|
},
|
|
/*
|
|
* Xircom cards
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_XIRCOM,
|
|
.device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_xircom_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
/*
|
|
* Netmos cards - these may be called via parport_serial
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NETMOS,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_netmos_init,
|
|
.setup = pci_netmos_9900_setup,
|
|
},
|
|
/*
|
|
* EndRun Technologies
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ENDRUN,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_oxsemi_tornado_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
/*
|
|
* For Oxford Semiconductor Tornado based devices
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_OXSEMI,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_oxsemi_tornado_init,
|
|
.setup = pci_oxsemi_tornado_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_MAINPINE,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_oxsemi_tornado_init,
|
|
.setup = pci_oxsemi_tornado_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_DIGI,
|
|
.device = PCIE_DEVICE_ID_NEO_2_OX_IBM,
|
|
.subvendor = PCI_SUBVENDOR_ID_IBM,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_oxsemi_tornado_init,
|
|
.setup = pci_oxsemi_tornado_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = 0x8811,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = 0x8812,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = 0x8813,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = 0x8814,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = 0x10DB,
|
|
.device = 0x8027,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = 0x10DB,
|
|
.device = 0x8028,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = 0x10DB,
|
|
.device = 0x8029,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = 0x10DB,
|
|
.device = 0x800C,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = 0x10DB,
|
|
.device = 0x800D,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_eg20t_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
/*
|
|
* Cronyx Omega PCI (PLX-chip based)
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_omegapci_setup,
|
|
},
|
|
/* WCH CH353 1S1P card (16550 clone) */
|
|
{
|
|
.vendor = PCI_VENDOR_ID_WCH,
|
|
.device = PCI_DEVICE_ID_WCH_CH353_1S1P,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch353_setup,
|
|
},
|
|
/* WCH CH353 2S1P card (16550 clone) */
|
|
{
|
|
.vendor = PCI_VENDOR_ID_WCH,
|
|
.device = PCI_DEVICE_ID_WCH_CH353_2S1P,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch353_setup,
|
|
},
|
|
/* WCH CH353 4S card (16550 clone) */
|
|
{
|
|
.vendor = PCI_VENDOR_ID_WCH,
|
|
.device = PCI_DEVICE_ID_WCH_CH353_4S,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch353_setup,
|
|
},
|
|
/* WCH CH353 2S1PF card (16550 clone) */
|
|
{
|
|
.vendor = PCI_VENDOR_ID_WCH,
|
|
.device = PCI_DEVICE_ID_WCH_CH353_2S1PF,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch353_setup,
|
|
},
|
|
/* WCH CH352 2S card (16550 clone) */
|
|
{
|
|
.vendor = PCI_VENDOR_ID_WCH,
|
|
.device = PCI_DEVICE_ID_WCH_CH352_2S,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch353_setup,
|
|
},
|
|
/* WCH CH355 4S card (16550 clone) */
|
|
{
|
|
.vendor = PCI_VENDOR_ID_WCH,
|
|
.device = PCI_DEVICE_ID_WCH_CH355_4S,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch355_setup,
|
|
},
|
|
/* WCH CH382 2S card (16850 clone) */
|
|
{
|
|
.vendor = PCIE_VENDOR_ID_WCH,
|
|
.device = PCIE_DEVICE_ID_WCH_CH382_2S,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch38x_setup,
|
|
},
|
|
/* WCH CH382 2S1P card (16850 clone) */
|
|
{
|
|
.vendor = PCIE_VENDOR_ID_WCH,
|
|
.device = PCIE_DEVICE_ID_WCH_CH382_2S1P,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch38x_setup,
|
|
},
|
|
/* WCH CH384 4S card (16850 clone) */
|
|
{
|
|
.vendor = PCIE_VENDOR_ID_WCH,
|
|
.device = PCIE_DEVICE_ID_WCH_CH384_4S,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_wch_ch38x_setup,
|
|
},
|
|
/* WCH CH384 8S card (16850 clone) */
|
|
{
|
|
.vendor = PCIE_VENDOR_ID_WCH,
|
|
.device = PCIE_DEVICE_ID_WCH_CH384_8S,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_wch_ch38x_init,
|
|
.exit = pci_wch_ch38x_exit,
|
|
.setup = pci_wch_ch38x_setup,
|
|
},
|
|
/*
|
|
* ASIX devices with FIFO bug
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ASIX,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_asix_setup,
|
|
},
|
|
/*
|
|
* Broadcom TruManage (NetXtreme)
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_BROADCOM,
|
|
.device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_brcm_trumanage_setup,
|
|
},
|
|
{
|
|
.vendor = 0x1c29,
|
|
.device = 0x1104,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_fintek_setup,
|
|
.init = pci_fintek_init,
|
|
},
|
|
{
|
|
.vendor = 0x1c29,
|
|
.device = 0x1108,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_fintek_setup,
|
|
.init = pci_fintek_init,
|
|
},
|
|
{
|
|
.vendor = 0x1c29,
|
|
.device = 0x1112,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_fintek_setup,
|
|
.init = pci_fintek_init,
|
|
},
|
|
/*
|
|
* MOXA
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_MOXA,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_moxa_setup,
|
|
},
|
|
{
|
|
.vendor = 0x1c29,
|
|
.device = 0x1204,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_fintek_f815xxa_setup,
|
|
.init = pci_fintek_f815xxa_init,
|
|
},
|
|
{
|
|
.vendor = 0x1c29,
|
|
.device = 0x1208,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_fintek_f815xxa_setup,
|
|
.init = pci_fintek_f815xxa_init,
|
|
},
|
|
{
|
|
.vendor = 0x1c29,
|
|
.device = 0x1212,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_fintek_f815xxa_setup,
|
|
.init = pci_fintek_f815xxa_init,
|
|
},
|
|
|
|
/*
|
|
* Default "match everything" terminator entry
|
|
*/
|
|
{
|
|
.vendor = PCI_ANY_ID,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_default_setup,
|
|
}
|
|
};
|
|
|
|
static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
|
|
{
|
|
return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
|
|
}
|
|
|
|
static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
|
|
{
|
|
struct pci_serial_quirk *quirk;
|
|
|
|
for (quirk = pci_serial_quirks; ; quirk++)
|
|
if (quirk_id_matches(quirk->vendor, dev->vendor) &&
|
|
quirk_id_matches(quirk->device, dev->device) &&
|
|
quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
|
|
quirk_id_matches(quirk->subdevice, dev->subsystem_device))
|
|
break;
|
|
return quirk;
|
|
}
|
|
|
|
/*
|
|
* This is the configuration table for all of the PCI serial boards
|
|
* which we support. It is directly indexed by the pci_board_num_t enum
|
|
* value, which is encoded in the pci_device_id PCI probe table's
|
|
* driver_data member.
|
|
*
|
|
* The makeup of these names are:
|
|
* pbn_bn{_bt}_n_baud{_offsetinhex}
|
|
*
|
|
* bn = PCI BAR number
|
|
* bt = Index using PCI BARs
|
|
* n = number of serial ports
|
|
* baud = baud rate
|
|
* offsetinhex = offset for each sequential port (in hex)
|
|
*
|
|
* This table is sorted by (in order): bn, bt, baud, offsetindex, n.
|
|
*
|
|
* Please note: in theory if n = 1, _bt infix should make no difference.
|
|
* ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
|
|
*/
|
|
enum pci_board_num_t {
|
|
pbn_default = 0,
|
|
|
|
pbn_b0_1_115200,
|
|
pbn_b0_2_115200,
|
|
pbn_b0_4_115200,
|
|
pbn_b0_5_115200,
|
|
pbn_b0_8_115200,
|
|
|
|
pbn_b0_1_921600,
|
|
pbn_b0_2_921600,
|
|
pbn_b0_4_921600,
|
|
|
|
pbn_b0_2_1130000,
|
|
|
|
pbn_b0_4_1152000,
|
|
|
|
pbn_b0_4_1250000,
|
|
|
|
pbn_b0_2_1843200,
|
|
pbn_b0_4_1843200,
|
|
|
|
pbn_b0_1_15625000,
|
|
|
|
pbn_b0_bt_1_115200,
|
|
pbn_b0_bt_2_115200,
|
|
pbn_b0_bt_4_115200,
|
|
pbn_b0_bt_8_115200,
|
|
|
|
pbn_b0_bt_1_460800,
|
|
pbn_b0_bt_2_460800,
|
|
pbn_b0_bt_4_460800,
|
|
|
|
pbn_b0_bt_1_921600,
|
|
pbn_b0_bt_2_921600,
|
|
pbn_b0_bt_4_921600,
|
|
pbn_b0_bt_8_921600,
|
|
|
|
pbn_b1_1_115200,
|
|
pbn_b1_2_115200,
|
|
pbn_b1_4_115200,
|
|
pbn_b1_8_115200,
|
|
pbn_b1_16_115200,
|
|
|
|
pbn_b1_1_921600,
|
|
pbn_b1_2_921600,
|
|
pbn_b1_4_921600,
|
|
pbn_b1_8_921600,
|
|
|
|
pbn_b1_2_1250000,
|
|
|
|
pbn_b1_bt_1_115200,
|
|
pbn_b1_bt_2_115200,
|
|
pbn_b1_bt_4_115200,
|
|
|
|
pbn_b1_bt_2_921600,
|
|
|
|
pbn_b1_1_1382400,
|
|
pbn_b1_2_1382400,
|
|
pbn_b1_4_1382400,
|
|
pbn_b1_8_1382400,
|
|
|
|
pbn_b2_1_115200,
|
|
pbn_b2_2_115200,
|
|
pbn_b2_4_115200,
|
|
pbn_b2_8_115200,
|
|
|
|
pbn_b2_1_460800,
|
|
pbn_b2_4_460800,
|
|
pbn_b2_8_460800,
|
|
pbn_b2_16_460800,
|
|
|
|
pbn_b2_1_921600,
|
|
pbn_b2_4_921600,
|
|
pbn_b2_8_921600,
|
|
|
|
pbn_b2_8_1152000,
|
|
|
|
pbn_b2_bt_1_115200,
|
|
pbn_b2_bt_2_115200,
|
|
pbn_b2_bt_4_115200,
|
|
|
|
pbn_b2_bt_2_921600,
|
|
pbn_b2_bt_4_921600,
|
|
|
|
pbn_b3_2_115200,
|
|
pbn_b3_4_115200,
|
|
pbn_b3_8_115200,
|
|
|
|
pbn_b4_bt_2_921600,
|
|
pbn_b4_bt_4_921600,
|
|
pbn_b4_bt_8_921600,
|
|
|
|
/*
|
|
* Board-specific versions.
|
|
*/
|
|
pbn_panacom,
|
|
pbn_panacom2,
|
|
pbn_panacom4,
|
|
pbn_plx_romulus,
|
|
pbn_oxsemi,
|
|
pbn_oxsemi_1_15625000,
|
|
pbn_oxsemi_2_15625000,
|
|
pbn_oxsemi_4_15625000,
|
|
pbn_oxsemi_8_15625000,
|
|
pbn_intel_i960,
|
|
pbn_sgi_ioc3,
|
|
pbn_computone_4,
|
|
pbn_computone_6,
|
|
pbn_computone_8,
|
|
pbn_sbsxrsio,
|
|
pbn_pasemi_1682M,
|
|
pbn_ni8430_2,
|
|
pbn_ni8430_4,
|
|
pbn_ni8430_8,
|
|
pbn_ni8430_16,
|
|
pbn_ADDIDATA_PCIe_1_3906250,
|
|
pbn_ADDIDATA_PCIe_2_3906250,
|
|
pbn_ADDIDATA_PCIe_4_3906250,
|
|
pbn_ADDIDATA_PCIe_8_3906250,
|
|
pbn_ce4100_1_115200,
|
|
pbn_omegapci,
|
|
pbn_NETMOS9900_2s_115200,
|
|
pbn_brcm_trumanage,
|
|
pbn_fintek_4,
|
|
pbn_fintek_8,
|
|
pbn_fintek_12,
|
|
pbn_fintek_F81504A,
|
|
pbn_fintek_F81508A,
|
|
pbn_fintek_F81512A,
|
|
pbn_wch382_2,
|
|
pbn_wch384_4,
|
|
pbn_wch384_8,
|
|
pbn_sunix_pci_1s,
|
|
pbn_sunix_pci_2s,
|
|
pbn_sunix_pci_4s,
|
|
pbn_sunix_pci_8s,
|
|
pbn_sunix_pci_16s,
|
|
pbn_titan_1_4000000,
|
|
pbn_titan_2_4000000,
|
|
pbn_titan_4_4000000,
|
|
pbn_titan_8_4000000,
|
|
pbn_moxa8250_2p,
|
|
pbn_moxa8250_4p,
|
|
pbn_moxa8250_8p,
|
|
};
|
|
|
|
/*
|
|
* uart_offset - the space between channels
|
|
* reg_shift - describes how the UART registers are mapped
|
|
* to PCI memory by the card.
|
|
* For example IER register on SBS, Inc. PMC-OctPro is located at
|
|
* offset 0x10 from the UART base, while UART_IER is defined as 1
|
|
* in include/linux/serial_reg.h,
|
|
* see first lines of serial_in() and serial_out() in 8250.c
|
|
*/
|
|
|
|
static struct pciserial_board pci_boards[] = {
|
|
[pbn_default] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_1_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_2_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_4_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_5_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 5,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_8_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_1_921600] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_2_921600] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_4_921600] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_2_1130000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 1130000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_4_1152000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 1152000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_4_1250000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 1250000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_2_1843200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 1843200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_4_1843200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 1843200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_1_15625000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 15625000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_bt_1_115200] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_2_115200] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_4_115200] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_8_115200] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_bt_1_460800] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_2_460800] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_4_460800] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_bt_1_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_2_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_4_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_8_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_1_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_4_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_8_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_16_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 16,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_1_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_4_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_8_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_1250000] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 1250000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_bt_1_115200] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_bt_2_115200] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_bt_4_115200] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_bt_2_921600] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_1_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 1,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_4_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 4,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_8_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 8,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_1_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_2_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_4_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_8_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_1_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 1,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_4_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_8_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 8,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_16_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 16,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_1_921600] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_4_921600] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_8_921600] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_8_1152000] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 8,
|
|
.base_baud = 1152000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_bt_1_115200] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_bt_2_115200] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_bt_4_115200] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_bt_2_921600] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_bt_4_921600] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b3_2_115200] = {
|
|
.flags = FL_BASE3,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b3_4_115200] = {
|
|
.flags = FL_BASE3,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b3_8_115200] = {
|
|
.flags = FL_BASE3,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b4_bt_2_921600] = {
|
|
.flags = FL_BASE4,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b4_bt_4_921600] = {
|
|
.flags = FL_BASE4,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b4_bt_8_921600] = {
|
|
.flags = FL_BASE4,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
/*
|
|
* Entries following this are board-specific.
|
|
*/
|
|
|
|
/*
|
|
* Panacom - IOMEM
|
|
*/
|
|
[pbn_panacom] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x400,
|
|
.reg_shift = 7,
|
|
},
|
|
[pbn_panacom2] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x400,
|
|
.reg_shift = 7,
|
|
},
|
|
[pbn_panacom4] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x400,
|
|
.reg_shift = 7,
|
|
},
|
|
|
|
/* I think this entry is broken - the first_offset looks wrong --rmk */
|
|
[pbn_plx_romulus] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8 << 2,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x03,
|
|
},
|
|
|
|
/*
|
|
* This board uses the size of PCI Base region 0 to
|
|
* signal now many ports are available
|
|
*/
|
|
[pbn_oxsemi] = {
|
|
.flags = FL_BASE0|FL_REGION_SZ_CAP,
|
|
.num_ports = 32,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_oxsemi_1_15625000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 15625000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_oxsemi_2_15625000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 15625000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_oxsemi_4_15625000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 15625000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_oxsemi_8_15625000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 15625000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
|
|
|
|
/*
|
|
* EKF addition for i960 Boards form EKF with serial port.
|
|
* Max 256 ports.
|
|
*/
|
|
[pbn_intel_i960] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 32,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8 << 2,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x10000,
|
|
},
|
|
[pbn_sgi_ioc3] = {
|
|
.flags = FL_BASE0|FL_NOIRQ,
|
|
.num_ports = 1,
|
|
.base_baud = 458333,
|
|
.uart_offset = 8,
|
|
.reg_shift = 0,
|
|
.first_offset = 0x20178,
|
|
},
|
|
|
|
/*
|
|
* Computone - uses IOMEM.
|
|
*/
|
|
[pbn_computone_4] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x40,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x200,
|
|
},
|
|
[pbn_computone_6] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 6,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x40,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x200,
|
|
},
|
|
[pbn_computone_8] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x40,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x200,
|
|
},
|
|
[pbn_sbsxrsio] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 460800,
|
|
.uart_offset = 256,
|
|
.reg_shift = 4,
|
|
},
|
|
/*
|
|
* PA Semi PWRficient PA6T-1682M on-chip UART
|
|
*/
|
|
[pbn_pasemi_1682M] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 8333333,
|
|
},
|
|
/*
|
|
* National Instruments 843x
|
|
*/
|
|
[pbn_ni8430_16] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 16,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
[pbn_ni8430_8] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
[pbn_ni8430_4] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
[pbn_ni8430_2] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
/*
|
|
* ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
|
|
*/
|
|
[pbn_ADDIDATA_PCIe_1_3906250] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 3906250,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_ADDIDATA_PCIe_2_3906250] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 3906250,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_ADDIDATA_PCIe_4_3906250] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 3906250,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_ADDIDATA_PCIe_8_3906250] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 3906250,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_ce4100_1_115200] = {
|
|
.flags = FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.reg_shift = 2,
|
|
},
|
|
[pbn_omegapci] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_NETMOS9900_2s_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
},
|
|
[pbn_brcm_trumanage] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.reg_shift = 2,
|
|
.base_baud = 115200,
|
|
},
|
|
[pbn_fintek_4] = {
|
|
.num_ports = 4,
|
|
.uart_offset = 8,
|
|
.base_baud = 115200,
|
|
.first_offset = 0x40,
|
|
},
|
|
[pbn_fintek_8] = {
|
|
.num_ports = 8,
|
|
.uart_offset = 8,
|
|
.base_baud = 115200,
|
|
.first_offset = 0x40,
|
|
},
|
|
[pbn_fintek_12] = {
|
|
.num_ports = 12,
|
|
.uart_offset = 8,
|
|
.base_baud = 115200,
|
|
.first_offset = 0x40,
|
|
},
|
|
[pbn_fintek_F81504A] = {
|
|
.num_ports = 4,
|
|
.uart_offset = 8,
|
|
.base_baud = 115200,
|
|
},
|
|
[pbn_fintek_F81508A] = {
|
|
.num_ports = 8,
|
|
.uart_offset = 8,
|
|
.base_baud = 115200,
|
|
},
|
|
[pbn_fintek_F81512A] = {
|
|
.num_ports = 12,
|
|
.uart_offset = 8,
|
|
.base_baud = 115200,
|
|
},
|
|
[pbn_wch382_2] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
.first_offset = 0xC0,
|
|
},
|
|
[pbn_wch384_4] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
.first_offset = 0xC0,
|
|
},
|
|
[pbn_wch384_8] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
.first_offset = 0x00,
|
|
},
|
|
[pbn_sunix_pci_1s] = {
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x8,
|
|
},
|
|
[pbn_sunix_pci_2s] = {
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x8,
|
|
},
|
|
[pbn_sunix_pci_4s] = {
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x8,
|
|
},
|
|
[pbn_sunix_pci_8s] = {
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x8,
|
|
},
|
|
[pbn_sunix_pci_16s] = {
|
|
.num_ports = 16,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x8,
|
|
},
|
|
[pbn_titan_1_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_titan_2_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_titan_4_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_titan_8_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_moxa8250_2p] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_moxa8250_4p] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_moxa8250_8p] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x200,
|
|
},
|
|
};
|
|
|
|
#define REPORT_CONFIG(option) \
|
|
(IS_ENABLED(CONFIG_##option) ? 0 : (kernel_ulong_t)&#option)
|
|
#define REPORT_8250_CONFIG(option) \
|
|
(IS_ENABLED(CONFIG_SERIAL_8250_##option) ? \
|
|
0 : (kernel_ulong_t)&"SERIAL_8250_"#option)
|
|
|
|
static const struct pci_device_id blacklist[] = {
|
|
/* softmodems */
|
|
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
|
|
{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
|
|
{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
|
|
|
|
/* multi-io cards handled by parport_serial */
|
|
/* WCH CH353 2S1P */
|
|
{ PCI_DEVICE(0x4348, 0x7053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), },
|
|
/* WCH CH353 1S1P */
|
|
{ PCI_DEVICE(0x4348, 0x5053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), },
|
|
/* WCH CH382 2S1P */
|
|
{ PCI_DEVICE(0x1c00, 0x3250), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), },
|
|
|
|
/* Intel platforms with MID UART */
|
|
{ PCI_VDEVICE(INTEL, 0x081b), REPORT_8250_CONFIG(MID), },
|
|
{ PCI_VDEVICE(INTEL, 0x081c), REPORT_8250_CONFIG(MID), },
|
|
{ PCI_VDEVICE(INTEL, 0x081d), REPORT_8250_CONFIG(MID), },
|
|
{ PCI_VDEVICE(INTEL, 0x1191), REPORT_8250_CONFIG(MID), },
|
|
{ PCI_VDEVICE(INTEL, 0x18d8), REPORT_8250_CONFIG(MID), },
|
|
{ PCI_VDEVICE(INTEL, 0x19d8), REPORT_8250_CONFIG(MID), },
|
|
|
|
/* Intel platforms with DesignWare UART */
|
|
{ PCI_VDEVICE(INTEL, 0x0936), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x0f0a), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x0f0c), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x228a), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x228c), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x4b96), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x4b97), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x4b98), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x4b99), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x4b9a), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x4b9b), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x9ce3), REPORT_8250_CONFIG(LPSS), },
|
|
{ PCI_VDEVICE(INTEL, 0x9ce4), REPORT_8250_CONFIG(LPSS), },
|
|
|
|
/* Exar devices */
|
|
{ PCI_VDEVICE(EXAR, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), },
|
|
{ PCI_VDEVICE(COMMTECH, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), },
|
|
|
|
/* Pericom devices */
|
|
{ PCI_VDEVICE(PERICOM, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), },
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), },
|
|
|
|
/* End of the black list */
|
|
{ }
|
|
};
|
|
|
|
static int serial_pci_is_class_communication(struct pci_dev *dev)
|
|
{
|
|
/*
|
|
* If it is not a communications device or the programming
|
|
* interface is greater than 6, give up.
|
|
*/
|
|
if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
|
|
((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) &&
|
|
((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
|
|
(dev->class & 0xff) > 6)
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Given a complete unknown PCI device, try to use some heuristics to
|
|
* guess what the configuration might be, based on the pitiful PCI
|
|
* serial specs. Returns 0 on success, -ENODEV on failure.
|
|
*/
|
|
static int
|
|
serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
|
|
{
|
|
int num_iomem, num_port, first_port = -1, i;
|
|
int rc;
|
|
|
|
rc = serial_pci_is_class_communication(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Should we try to make guesses for multiport serial devices later?
|
|
*/
|
|
if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL)
|
|
return -ENODEV;
|
|
|
|
num_iomem = num_port = 0;
|
|
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
|
|
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
|
|
num_port++;
|
|
if (first_port == -1)
|
|
first_port = i;
|
|
}
|
|
if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
|
|
num_iomem++;
|
|
}
|
|
|
|
/*
|
|
* If there is 1 or 0 iomem regions, and exactly one port,
|
|
* use it. We guess the number of ports based on the IO
|
|
* region size.
|
|
*/
|
|
if (num_iomem <= 1 && num_port == 1) {
|
|
board->flags = first_port;
|
|
board->num_ports = pci_resource_len(dev, first_port) / 8;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Now guess if we've got a board which indexes by BARs.
|
|
* Each IO BAR should be 8 bytes, and they should follow
|
|
* consecutively.
|
|
*/
|
|
first_port = -1;
|
|
num_port = 0;
|
|
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
|
|
if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
|
|
pci_resource_len(dev, i) == 8 &&
|
|
(first_port == -1 || (first_port + num_port) == i)) {
|
|
num_port++;
|
|
if (first_port == -1)
|
|
first_port = i;
|
|
}
|
|
}
|
|
|
|
if (num_port > 1) {
|
|
board->flags = first_port | FL_BASE_BARS;
|
|
board->num_ports = num_port;
|
|
return 0;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static inline int
|
|
serial_pci_matches(const struct pciserial_board *board,
|
|
const struct pciserial_board *guessed)
|
|
{
|
|
return
|
|
board->num_ports == guessed->num_ports &&
|
|
board->base_baud == guessed->base_baud &&
|
|
board->uart_offset == guessed->uart_offset &&
|
|
board->reg_shift == guessed->reg_shift &&
|
|
board->first_offset == guessed->first_offset;
|
|
}
|
|
|
|
struct serial_private *
|
|
pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
|
|
{
|
|
struct uart_8250_port uart;
|
|
struct serial_private *priv;
|
|
struct pci_serial_quirk *quirk;
|
|
int rc, nr_ports, i;
|
|
|
|
nr_ports = board->num_ports;
|
|
|
|
/*
|
|
* Find an init and setup quirks.
|
|
*/
|
|
quirk = find_quirk(dev);
|
|
|
|
/*
|
|
* Run the new-style initialization function.
|
|
* The initialization function returns:
|
|
* <0 - error
|
|
* 0 - use board->num_ports
|
|
* >0 - number of ports
|
|
*/
|
|
if (quirk->init) {
|
|
rc = quirk->init(dev);
|
|
if (rc < 0) {
|
|
priv = ERR_PTR(rc);
|
|
goto err_out;
|
|
}
|
|
if (rc)
|
|
nr_ports = rc;
|
|
}
|
|
|
|
priv = kzalloc(struct_size(priv, line, nr_ports), GFP_KERNEL);
|
|
if (!priv) {
|
|
priv = ERR_PTR(-ENOMEM);
|
|
goto err_deinit;
|
|
}
|
|
|
|
priv->dev = dev;
|
|
priv->quirk = quirk;
|
|
|
|
memset(&uart, 0, sizeof(uart));
|
|
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
|
|
uart.port.uartclk = board->base_baud * 16;
|
|
|
|
if (board->flags & FL_NOIRQ) {
|
|
uart.port.irq = 0;
|
|
} else {
|
|
if (pci_match_id(pci_use_msi, dev)) {
|
|
pci_dbg(dev, "Using MSI(-X) interrupts\n");
|
|
pci_set_master(dev);
|
|
uart.port.flags &= ~UPF_SHARE_IRQ;
|
|
rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
|
|
} else {
|
|
pci_dbg(dev, "Using legacy interrupts\n");
|
|
rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
|
|
}
|
|
if (rc < 0) {
|
|
kfree(priv);
|
|
priv = ERR_PTR(rc);
|
|
goto err_deinit;
|
|
}
|
|
|
|
uart.port.irq = pci_irq_vector(dev, 0);
|
|
}
|
|
|
|
uart.port.dev = &dev->dev;
|
|
|
|
for (i = 0; i < nr_ports; i++) {
|
|
if (quirk->setup(priv, board, &uart, i))
|
|
break;
|
|
|
|
pci_dbg(dev, "Setup PCI port: port %lx, irq %d, type %d\n",
|
|
uart.port.iobase, uart.port.irq, uart.port.iotype);
|
|
|
|
priv->line[i] = serial8250_register_8250_port(&uart);
|
|
if (priv->line[i] < 0) {
|
|
pci_err(dev,
|
|
"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
|
|
uart.port.iobase, uart.port.irq,
|
|
uart.port.iotype, priv->line[i]);
|
|
break;
|
|
}
|
|
}
|
|
priv->nr = i;
|
|
priv->board = board;
|
|
return priv;
|
|
|
|
err_deinit:
|
|
if (quirk->exit)
|
|
quirk->exit(dev);
|
|
err_out:
|
|
return priv;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_init_ports);
|
|
|
|
static void pciserial_detach_ports(struct serial_private *priv)
|
|
{
|
|
struct pci_serial_quirk *quirk;
|
|
int i;
|
|
|
|
for (i = 0; i < priv->nr; i++)
|
|
serial8250_unregister_port(priv->line[i]);
|
|
|
|
/*
|
|
* Find the exit quirks.
|
|
*/
|
|
quirk = find_quirk(priv->dev);
|
|
if (quirk->exit)
|
|
quirk->exit(priv->dev);
|
|
}
|
|
|
|
void pciserial_remove_ports(struct serial_private *priv)
|
|
{
|
|
pciserial_detach_ports(priv);
|
|
kfree(priv);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_remove_ports);
|
|
|
|
void pciserial_suspend_ports(struct serial_private *priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < priv->nr; i++)
|
|
if (priv->line[i] >= 0)
|
|
serial8250_suspend_port(priv->line[i]);
|
|
|
|
/*
|
|
* Ensure that every init quirk is properly torn down
|
|
*/
|
|
if (priv->quirk->exit)
|
|
priv->quirk->exit(priv->dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
|
|
|
|
void pciserial_resume_ports(struct serial_private *priv)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Ensure that the board is correctly configured.
|
|
*/
|
|
if (priv->quirk->init)
|
|
priv->quirk->init(priv->dev);
|
|
|
|
for (i = 0; i < priv->nr; i++)
|
|
if (priv->line[i] >= 0)
|
|
serial8250_resume_port(priv->line[i]);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_resume_ports);
|
|
|
|
/*
|
|
* Probe one serial board. Unfortunately, there is no rhyme nor reason
|
|
* to the arrangement of serial ports on a PCI card.
|
|
*/
|
|
static int
|
|
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
|
|
{
|
|
struct pci_serial_quirk *quirk;
|
|
struct serial_private *priv;
|
|
const struct pciserial_board *board;
|
|
const struct pci_device_id *exclude;
|
|
struct pciserial_board tmp;
|
|
int rc;
|
|
|
|
quirk = find_quirk(dev);
|
|
if (quirk->probe) {
|
|
rc = quirk->probe(dev);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
|
|
pci_err(dev, "invalid driver_data: %ld\n", ent->driver_data);
|
|
return -EINVAL;
|
|
}
|
|
|
|
board = &pci_boards[ent->driver_data];
|
|
|
|
exclude = pci_match_id(blacklist, dev);
|
|
if (exclude) {
|
|
if (exclude->driver_data)
|
|
pci_warn(dev, "ignoring port, enable %s to handle\n",
|
|
(const char *)exclude->driver_data);
|
|
return -ENODEV;
|
|
}
|
|
|
|
rc = pcim_enable_device(dev);
|
|
pci_save_state(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (ent->driver_data == pbn_default) {
|
|
/*
|
|
* Use a copy of the pci_board entry for this;
|
|
* avoid changing entries in the table.
|
|
*/
|
|
memcpy(&tmp, board, sizeof(struct pciserial_board));
|
|
board = &tmp;
|
|
|
|
/*
|
|
* We matched one of our class entries. Try to
|
|
* determine the parameters of this board.
|
|
*/
|
|
rc = serial_pci_guess_board(dev, &tmp);
|
|
if (rc)
|
|
return rc;
|
|
} else {
|
|
/*
|
|
* We matched an explicit entry. If we are able to
|
|
* detect this boards settings with our heuristic,
|
|
* then we no longer need this entry.
|
|
*/
|
|
memcpy(&tmp, &pci_boards[pbn_default],
|
|
sizeof(struct pciserial_board));
|
|
rc = serial_pci_guess_board(dev, &tmp);
|
|
if (rc == 0 && serial_pci_matches(board, &tmp))
|
|
moan_device("Redundant entry in serial pci_table.",
|
|
dev);
|
|
}
|
|
|
|
priv = pciserial_init_ports(dev, board);
|
|
if (IS_ERR(priv))
|
|
return PTR_ERR(priv);
|
|
|
|
pci_set_drvdata(dev, priv);
|
|
return 0;
|
|
}
|
|
|
|
static void pciserial_remove_one(struct pci_dev *dev)
|
|
{
|
|
struct serial_private *priv = pci_get_drvdata(dev);
|
|
|
|
pciserial_remove_ports(priv);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int pciserial_suspend_one(struct device *dev)
|
|
{
|
|
struct serial_private *priv = dev_get_drvdata(dev);
|
|
|
|
if (priv)
|
|
pciserial_suspend_ports(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pciserial_resume_one(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct serial_private *priv = pci_get_drvdata(pdev);
|
|
int err;
|
|
|
|
if (priv) {
|
|
/*
|
|
* The device may have been disabled. Re-enable it.
|
|
*/
|
|
err = pci_enable_device(pdev);
|
|
/* FIXME: We cannot simply error out here */
|
|
if (err)
|
|
pci_err(pdev, "Unable to re-enable ports, trying to continue.\n");
|
|
pciserial_resume_ports(priv);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one,
|
|
pciserial_resume_one);
|
|
|
|
static const struct pci_device_id serial_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI1600,
|
|
PCI_DEVICE_ID_ADVANTECH_PCI1600_1611, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
|
|
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
|
|
PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
|
|
pbn_b2_8_921600 },
|
|
/* Advantech also use 0x3618 and 0xf618 */
|
|
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618,
|
|
PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618,
|
|
PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
|
|
pbn_b1_8_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
|
|
pbn_b1_4_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
|
|
pbn_b1_2_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
|
|
pbn_b1_8_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
|
|
pbn_b1_4_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
|
|
pbn_b1_2_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
|
|
pbn_b1_4_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
|
|
pbn_b1_4_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
|
|
pbn_b1_2_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
|
|
pbn_b1_4_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
|
|
pbn_b1_2_1250000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
|
|
pbn_b0_2_1843200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
|
|
pbn_b0_4_1843200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_VENDOR_ID_AFAVLAB,
|
|
PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
|
|
pbn_b0_4_1152000 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_1_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_460800 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
/*
|
|
* VScom SPCOM800, from sl@s.pl
|
|
*/
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_921600 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_4_921600 },
|
|
/* Unknown card - subdevice 0x1584 */
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_VENDOR_ID_PLX,
|
|
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
|
|
pbn_b2_4_115200 },
|
|
/* Unknown card - subdevice 0x1588 */
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_VENDOR_ID_PLX,
|
|
PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
|
|
pbn_b2_8_115200 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_KEYSPAN,
|
|
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
|
|
pbn_panacom },
|
|
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_panacom4 },
|
|
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_panacom2 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
|
|
PCI_VENDOR_ID_ESDGMBH,
|
|
PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
|
|
pbn_b2_4_115200 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
|
|
pbn_b2_4_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
|
|
pbn_b2_8_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
|
|
pbn_b2_16_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
|
|
pbn_b2_16_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
|
|
pbn_b2_4_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
|
|
pbn_b2_8_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_EXSYS,
|
|
PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
|
|
pbn_b2_4_115200 },
|
|
/*
|
|
* Megawolf Romulus PCI Serial Card, from Mike Hudson
|
|
* (Exoray@isys.ca)
|
|
*/
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
|
|
0x10b5, 0x106a, 0, 0,
|
|
pbn_plx_romulus },
|
|
/*
|
|
* Quatech cards. These actually have configurable clocks but for
|
|
* now we just use the default.
|
|
*
|
|
* 100 series are RS232, 200 series RS422,
|
|
*/
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_4_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_4_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_4_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_4_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_4_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_4_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
|
|
0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
|
|
0, 0,
|
|
pbn_b0_4_1152000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0x9505,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
|
|
/*
|
|
* The below card is a little controversial since it is the
|
|
* subject of a PCI vendor/device ID clash. (See
|
|
* www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
|
|
* For now just used the hex ID 0x950a.
|
|
*/
|
|
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
|
|
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
|
|
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_2_1130000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
|
|
PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_115200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_1152000 },
|
|
|
|
/*
|
|
* Oxford Semiconductor Inc. Tornado PCI express device range.
|
|
*/
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_8_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_8_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
/*
|
|
* Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
|
|
*/
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
|
|
pbn_oxsemi_8_15625000 },
|
|
|
|
/*
|
|
* Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
|
|
*/
|
|
{ PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
|
|
PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
/*
|
|
* EndRun Technologies. PCI express device range.
|
|
* EndRun PTP/1588 has 2 Native UARTs utilizing OxSemi 952.
|
|
*/
|
|
{ PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
|
|
/*
|
|
* SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
|
|
* from skokodyn@yahoo.com
|
|
*/
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
|
|
pbn_sbsxrsio },
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
|
|
pbn_sbsxrsio },
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
|
|
pbn_sbsxrsio },
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
|
|
pbn_sbsxrsio },
|
|
|
|
/*
|
|
* Digitan DS560-558, from jimd@esoft.com
|
|
*/
|
|
{ PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_115200 },
|
|
|
|
/*
|
|
* Titan Electronic cards
|
|
* The 400L and 800L have a custom setup quirk.
|
|
*/
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_2_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b4_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b4_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b4_bt_8_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_titan_1_4000000 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_titan_2_4000000 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_titan_4_4000000 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_titan_8_4000000 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_titan_2_4000000 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_titan_2_4000000 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_460800 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_460800 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_460800 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
|
|
/*
|
|
* Computone devices submitted by Doug McNash dmcnash@computone.com
|
|
*/
|
|
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
|
|
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
|
|
0, 0, pbn_computone_4 },
|
|
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
|
|
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
|
|
0, 0, pbn_computone_8 },
|
|
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
|
|
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
|
|
0, 0, pbn_computone_6 },
|
|
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi },
|
|
{ PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
|
|
PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_1_921600 },
|
|
|
|
/*
|
|
* Sunix PCI serial boards
|
|
*/
|
|
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
|
|
PCI_VENDOR_ID_SUNIX, 0x0001, 0, 0,
|
|
pbn_sunix_pci_1s },
|
|
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
|
|
PCI_VENDOR_ID_SUNIX, 0x0002, 0, 0,
|
|
pbn_sunix_pci_2s },
|
|
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
|
|
PCI_VENDOR_ID_SUNIX, 0x0004, 0, 0,
|
|
pbn_sunix_pci_4s },
|
|
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
|
|
PCI_VENDOR_ID_SUNIX, 0x0084, 0, 0,
|
|
pbn_sunix_pci_4s },
|
|
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
|
|
PCI_VENDOR_ID_SUNIX, 0x0008, 0, 0,
|
|
pbn_sunix_pci_8s },
|
|
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
|
|
PCI_VENDOR_ID_SUNIX, 0x0088, 0, 0,
|
|
pbn_sunix_pci_8s },
|
|
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
|
|
PCI_VENDOR_ID_SUNIX, 0x0010, 0, 0,
|
|
pbn_sunix_pci_16s },
|
|
|
|
/*
|
|
* AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
|
|
*/
|
|
{ PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_115200 },
|
|
{ PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_1_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_1_460800 },
|
|
|
|
/*
|
|
* Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
|
|
* Cards are identified by their subsystem vendor IDs, which
|
|
* (in hex) match the model number.
|
|
*
|
|
* Note that JC140x are RS422/485 cards which require ox950
|
|
* ACR = 0x10, and as such are not currently fully supported.
|
|
*/
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1204, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1208, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1402, 0x0002, 0, 0,
|
|
pbn_b0_2_921600 }, */
|
|
/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1404, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 }, */
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
|
|
0x1208, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
|
|
0x1204, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
|
|
0x1208, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3,
|
|
0x1208, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
/*
|
|
* Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
|
|
*/
|
|
{ PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_1382400 },
|
|
|
|
/*
|
|
* Dell Remote Access Card III - Tim_T_Murphy@Dell.com
|
|
*/
|
|
{ PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_1382400 },
|
|
|
|
/*
|
|
* RAStel 2 port modem, gerg@moreton.com.au
|
|
*/
|
|
{ PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
|
|
/*
|
|
* EKF addition for i960 Boards form EKF with serial port
|
|
*/
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
|
|
0xE4BF, PCI_ANY_ID, 0, 0,
|
|
pbn_intel_i960 },
|
|
|
|
/*
|
|
* Xircom Cardbus/Ethernet combos
|
|
*/
|
|
{ PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_115200 },
|
|
/*
|
|
* Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
|
|
*/
|
|
{ PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_115200 },
|
|
|
|
/*
|
|
* Untested PCI modems, sent in from various folks...
|
|
*/
|
|
|
|
/*
|
|
* Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
|
|
*/
|
|
{ PCI_VENDOR_ID_ROCKWELL, 0x1004,
|
|
0x1048, 0x1500, 0, 0,
|
|
pbn_b1_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
|
|
0xFF00, 0, 0, 0,
|
|
pbn_sgi_ioc3 },
|
|
|
|
/*
|
|
* HP Diva card
|
|
*/
|
|
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
|
|
PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
|
|
pbn_b1_1_115200 },
|
|
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_5_115200 },
|
|
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_115200 },
|
|
/* HPE PCI serial device */
|
|
{ PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b3_2_115200 },
|
|
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b3_4_115200 },
|
|
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b3_8_115200 },
|
|
/*
|
|
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
|
|
*/
|
|
{ PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_115200 },
|
|
/*
|
|
* ITE
|
|
*/
|
|
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b1_bt_1_115200 },
|
|
|
|
/*
|
|
* IntaShield IS-200
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* IntaShield IS-400
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
|
|
pbn_b2_4_115200 },
|
|
/* Brainboxes Devices */
|
|
/*
|
|
* Brainboxes UC-101
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0BA1,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* Brainboxes UC-235/246
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0AA1,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_1_115200 },
|
|
/*
|
|
* Brainboxes UC-257
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0861,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* Brainboxes UC-260/271/701/756
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0D21,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
|
|
pbn_b2_4_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0E34,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
|
|
pbn_b2_4_115200 },
|
|
/*
|
|
* Brainboxes UC-268
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0841,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_4_115200 },
|
|
/*
|
|
* Brainboxes UC-275/279
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0881,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_8_115200 },
|
|
/*
|
|
* Brainboxes UC-302
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x08E1,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* Brainboxes UC-310
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x08C1,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* Brainboxes UC-313
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x08A3,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* Brainboxes UC-320/324
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0A61,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_1_115200 },
|
|
/*
|
|
* Brainboxes UC-346
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0B02,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_4_115200 },
|
|
/*
|
|
* Brainboxes UC-357
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0A81,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_2_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0A83,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* Brainboxes UC-368
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0C41,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_4_115200 },
|
|
/*
|
|
* Brainboxes UC-420/431
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x0921,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b2_4_115200 },
|
|
/*
|
|
* Brainboxes PX-101
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4005,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b0_2_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4019,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
/*
|
|
* Brainboxes PX-235/246
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4004,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b0_1_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4016,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
/*
|
|
* Brainboxes PX-203/PX-257
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4006,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b0_2_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4015,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
/*
|
|
* Brainboxes PX-260/PX-701
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x400A,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
/*
|
|
* Brainboxes PX-310
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x400E,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
/*
|
|
* Brainboxes PX-313
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x400C,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_2_15625000 },
|
|
/*
|
|
* Brainboxes PX-320/324/PX-376/PX-387
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x400B,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
/*
|
|
* Brainboxes PX-335/346
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x400F,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
/*
|
|
* Brainboxes PX-368
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4010,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
/*
|
|
* Brainboxes PX-420
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4000,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b0_4_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4011,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_4_15625000 },
|
|
/*
|
|
* Brainboxes PX-803
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4009,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b0_1_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x401E,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
/*
|
|
* Brainboxes PX-846
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4008,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b0_1_115200 },
|
|
{ PCI_VENDOR_ID_INTASHIELD, 0x4017,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_oxsemi_1_15625000 },
|
|
|
|
/*
|
|
* Perle PCI-RAS cards
|
|
*/
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
|
|
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
|
|
0, 0, pbn_b2_4_921600 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
|
|
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
|
|
0, 0, pbn_b2_8_921600 },
|
|
|
|
/*
|
|
* Mainpine series cards: Fairly standard layout but fools
|
|
* parts of the autodetect in some cases and uses otherwise
|
|
* unmatched communications subclasses in the PCI Express case
|
|
*/
|
|
|
|
{ /* RockForceDUO */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0200,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceQUATRO */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0300,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceDUO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0400,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceQUATRO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0500,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForce+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0600,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForce+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0700,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceOCTO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0800,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* RockForceDUO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0C00,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceQUARTRO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0D00,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceOCTO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x1D00,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* RockForceD1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* RockForceF1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2100,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* RockForceD2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2200,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceF2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2300,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceD4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2400,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceF4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2500,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceD8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2600,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* RockForceF8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2700,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* IQ Express D1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* IQ Express F1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3100,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* IQ Express D2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3200,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* IQ Express F2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3300,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* IQ Express D4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3400,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* IQ Express F4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3500,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* IQ Express D8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3C00,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* IQ Express F8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3D00,
|
|
0, 0, pbn_b0_8_115200 },
|
|
|
|
|
|
/*
|
|
* PA Semi PA6T-1682M on-chip UART
|
|
*/
|
|
{ PCI_VENDOR_ID_PASEMI, 0xa004,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_pasemi_1682M },
|
|
|
|
/*
|
|
* National Instruments
|
|
*/
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_16_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_16_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_8 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_8 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_16 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_16 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
|
|
/*
|
|
* MOXA
|
|
*/
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102E,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_2p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102EL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_2p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104EL_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_4p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114EL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_4p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_8p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_8p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118EL_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_8p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118E_A_I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_8p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132EL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_2p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134EL_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_4p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP138E_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_8p },
|
|
{ PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168EL_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_moxa8250_8p },
|
|
|
|
/*
|
|
* ADDI-DATA GmbH communication cards <info@addi-data.com>
|
|
*/
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7500,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_4_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7420,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7300,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_AMCC,
|
|
PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b1_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_4_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_4_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCIe7500,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_ADDIDATA_PCIe_4_3906250 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCIe7420,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_ADDIDATA_PCIe_2_3906250 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCIe7300,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_ADDIDATA_PCIe_1_3906250 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCIe7800,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_ADDIDATA_PCIe_8_3906250 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
|
|
PCI_VENDOR_ID_IBM, 0x0299,
|
|
0, 0, pbn_b0_bt_2_115200 },
|
|
|
|
/*
|
|
* other NetMos 9835 devices are most likely handled by the
|
|
* parport_serial driver, check drivers/parport/parport_serial.c
|
|
* before adding them here.
|
|
*/
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
|
|
0xA000, 0x1000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
/* the 9901 is a rebranded 9912 */
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
|
|
0xA000, 0x1000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
|
|
0xA000, 0x1000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
|
|
0xA000, 0x1000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
|
|
0xA000, 0x1000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
|
|
0xA000, 0x3002,
|
|
0, 0, pbn_NETMOS9900_2s_115200 },
|
|
|
|
/*
|
|
* Best Connectivity and Rosewill PCI Multi I/O cards
|
|
*/
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
|
|
0xA000, 0x1000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
|
|
0xA000, 0x3002,
|
|
0, 0, pbn_b0_bt_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
|
|
0xA000, 0x3004,
|
|
0, 0, pbn_b0_bt_4_115200 },
|
|
/* Intel CE4100 */
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ce4100_1_115200 },
|
|
|
|
/*
|
|
* Cronyx Omega PCI
|
|
*/
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_omegapci },
|
|
|
|
/*
|
|
* Broadcom TruManage
|
|
*/
|
|
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_brcm_trumanage },
|
|
|
|
/*
|
|
* AgeStar as-prs2-009
|
|
*/
|
|
{ PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_b0_bt_2_115200 },
|
|
|
|
/*
|
|
* WCH CH353 series devices: The 2S1P is handled by parport_serial
|
|
* so not listed here.
|
|
*/
|
|
{ PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_b0_bt_4_115200 },
|
|
|
|
{ PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_b0_bt_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH355_4S,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_b0_bt_4_115200 },
|
|
|
|
{ PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_wch382_2 },
|
|
|
|
{ PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_wch384_4 },
|
|
|
|
{ PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_8S,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_wch384_8 },
|
|
/*
|
|
* Realtek RealManage
|
|
*/
|
|
{ PCI_VENDOR_ID_REALTEK, 0x816a,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_REALTEK, 0x816b,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
/* Fintek PCI serial cards */
|
|
{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
|
|
{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
|
|
{ PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
|
|
{ PCI_DEVICE(0x1c29, 0x1204), .driver_data = pbn_fintek_F81504A },
|
|
{ PCI_DEVICE(0x1c29, 0x1208), .driver_data = pbn_fintek_F81508A },
|
|
{ PCI_DEVICE(0x1c29, 0x1212), .driver_data = pbn_fintek_F81512A },
|
|
|
|
/* MKS Tenta SCOM-080x serial cards */
|
|
{ PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
|
|
{ PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
|
|
|
|
/* Amazon PCI serial device */
|
|
{ PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 },
|
|
|
|
/*
|
|
* These entries match devices with class COMMUNICATION_SERIAL,
|
|
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
|
|
*/
|
|
{ PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_SERIAL << 8,
|
|
0xffff00, pbn_default },
|
|
{ PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_MODEM << 8,
|
|
0xffff00, pbn_default },
|
|
{ PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
|
|
0xffff00, pbn_default },
|
|
{ 0, }
|
|
};
|
|
|
|
static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct serial_private *priv = pci_get_drvdata(dev);
|
|
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
if (priv)
|
|
pciserial_detach_ports(priv);
|
|
|
|
pci_disable_device(dev);
|
|
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
|
|
{
|
|
int rc;
|
|
|
|
rc = pci_enable_device(dev);
|
|
|
|
if (rc)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
pci_restore_state(dev);
|
|
pci_save_state(dev);
|
|
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
static void serial8250_io_resume(struct pci_dev *dev)
|
|
{
|
|
struct serial_private *priv = pci_get_drvdata(dev);
|
|
struct serial_private *new;
|
|
|
|
if (!priv)
|
|
return;
|
|
|
|
new = pciserial_init_ports(dev, priv->board);
|
|
if (!IS_ERR(new)) {
|
|
pci_set_drvdata(dev, new);
|
|
kfree(priv);
|
|
}
|
|
}
|
|
|
|
static const struct pci_error_handlers serial8250_err_handler = {
|
|
.error_detected = serial8250_io_error_detected,
|
|
.slot_reset = serial8250_io_slot_reset,
|
|
.resume = serial8250_io_resume,
|
|
};
|
|
|
|
static struct pci_driver serial_pci_driver = {
|
|
.name = "serial",
|
|
.probe = pciserial_init_one,
|
|
.remove = pciserial_remove_one,
|
|
.driver = {
|
|
.pm = &pciserial_pm_ops,
|
|
},
|
|
.id_table = serial_pci_tbl,
|
|
.err_handler = &serial8250_err_handler,
|
|
};
|
|
|
|
module_pci_driver(serial_pci_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
|
|
MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
|
|
MODULE_IMPORT_NS(SERIAL_8250_PCI);
|