1569 lines
49 KiB
Plaintext
1569 lines
49 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Serial device configuration
|
|
#
|
|
|
|
menu "Serial drivers"
|
|
depends on HAS_IOMEM
|
|
|
|
config SERIAL_EARLYCON
|
|
bool
|
|
depends on SERIAL_CORE
|
|
help
|
|
Support for early consoles with the earlycon parameter. This enables
|
|
the console before standard serial driver is probed. The console is
|
|
enabled when early_param is processed.
|
|
|
|
source "drivers/tty/serial/8250/Kconfig"
|
|
|
|
comment "Non-8250 serial port support"
|
|
|
|
config SERIAL_AMBA_PL010
|
|
tristate "ARM AMBA PL010 serial port support"
|
|
depends on ARM_AMBA || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
|
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
|
Cirrus Logic EP93xx CPU, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_AMBA_PL010_CONSOLE
|
|
bool "Support for console on AMBA serial port"
|
|
depends on SERIAL_AMBA_PL010=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use an AMBA PrimeCell UART as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
Even if you say Y here, the currently visible framebuffer console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyAM0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_AMBA_PL011
|
|
tristate "ARM AMBA PL011 serial port support"
|
|
depends on ARM_AMBA
|
|
select SERIAL_CORE
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
|
|
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
|
|
here.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_AMBA_PL011_CONSOLE
|
|
bool "Support for console on AMBA serial port"
|
|
depends on SERIAL_AMBA_PL011=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Say Y here if you wish to use an AMBA PrimeCell UART as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
Even if you say Y here, the currently visible framebuffer console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyAMA0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_EARLYCON_SEMIHOST
|
|
bool "Early console using Arm compatible semihosting"
|
|
depends on ARM64 || ARM || RISCV
|
|
select SERIAL_CORE
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Support for early debug console using Arm compatible semihosting.
|
|
This enables the console before standard serial driver is probed.
|
|
This is enabled with "earlycon=smh" on the kernel command line.
|
|
The console is enabled when early_param is processed.
|
|
|
|
config SERIAL_EARLYCON_RISCV_SBI
|
|
bool "Early console using RISC-V SBI"
|
|
depends on RISCV_SBI_V01
|
|
select SERIAL_CORE
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Support for early debug console using RISC-V SBI. This enables
|
|
the console before standard serial driver is probed. This is enabled
|
|
with "earlycon=sbi" on the kernel command line. The console is
|
|
enabled when early_param is processed.
|
|
|
|
config SERIAL_SB1250_DUART
|
|
tristate "BCM1xxx on-chip DUART serial support"
|
|
depends on SIBYTE_SB1xxx_SOC=y
|
|
select SERIAL_CORE
|
|
default y
|
|
help
|
|
Support for the asynchronous serial interface (DUART) included in
|
|
the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
|
|
the letter D in DUART stands for "dual", which is how the device
|
|
is implemented. Depending on the SOC configuration there may be
|
|
one or more DUARTs available of which all are handled.
|
|
|
|
If unsure, say Y. To compile this driver as a module, choose M here:
|
|
the module will be called sb1250-duart.
|
|
|
|
config SERIAL_SB1250_DUART_CONSOLE
|
|
bool "Support for console on a BCM1xxx DUART serial port"
|
|
depends on SERIAL_SB1250_DUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
help
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode).
|
|
|
|
If unsure, say Y.
|
|
|
|
config SERIAL_ATMEL
|
|
bool "AT91 on-chip serial port support"
|
|
depends on COMMON_CLK
|
|
depends on ARCH_AT91 || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
select MFD_AT91_USART
|
|
help
|
|
This enables the driver for the on-chip UARTs of the Atmel
|
|
AT91 processors.
|
|
|
|
config SERIAL_ATMEL_CONSOLE
|
|
bool "Support for console on AT91 serial port"
|
|
depends on SERIAL_ATMEL=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Say Y here if you wish to use an on-chip UART on a Atmel
|
|
AT91 processor as the system console (the system
|
|
console is the device which receives all kernel messages and
|
|
warnings and which allows logins in single user mode).
|
|
|
|
config SERIAL_ATMEL_PDC
|
|
bool "Support DMA transfers on AT91 serial port"
|
|
depends on SERIAL_ATMEL
|
|
default y
|
|
help
|
|
Say Y here if you wish to use the PDC to do DMA transfers to
|
|
and from the Atmel AT91 serial port. In order to
|
|
actually use DMA transfers, make sure that the use_dma_tx
|
|
and use_dma_rx members in the atmel_uart_data struct is set
|
|
appropriately for each port.
|
|
|
|
Note that break and error handling currently doesn't work
|
|
properly when DMA is enabled. Make sure that ports where
|
|
this matters don't use DMA.
|
|
|
|
config SERIAL_ATMEL_TTYAT
|
|
bool "Install as device ttyATn instead of ttySn"
|
|
depends on SERIAL_ATMEL=y
|
|
help
|
|
Say Y here if you wish to have the internal AT91 UARTs
|
|
appear as /dev/ttyATn (major 204, minor starting at 154)
|
|
instead of the normal /dev/ttySn (major 4, minor starting at
|
|
64). This is necessary if you also want other UARTs, such as
|
|
external 8250/16C550 compatible UARTs.
|
|
The ttySn nodes are legally reserved for the 8250 serial driver
|
|
but are often misused by other serial drivers.
|
|
|
|
To use this, you should create suitable ttyATn device nodes in
|
|
/dev/, and pass "console=ttyATn" to the kernel.
|
|
|
|
Say Y if you have an external 8250/16C550 UART. If unsure, say N.
|
|
|
|
config SERIAL_KGDB_NMI
|
|
bool "Serial console over KGDB NMI debugger port"
|
|
depends on KGDB_SERIAL_CONSOLE
|
|
help
|
|
This special driver allows you to temporary use NMI debugger port
|
|
as a normal console (assuming that the port is attached to KGDB).
|
|
|
|
Unlike KDB's disable_nmi command, with this driver you are always
|
|
able to go back to the debugger using KGDB escape sequence ($3#33).
|
|
This is because this console driver processes the input in NMI
|
|
context, and thus is able to intercept the magic sequence.
|
|
|
|
Note that since the console interprets input and uses polling
|
|
communication methods, for things like PPP you still must fully
|
|
detach debugger port from the KGDB NMI (i.e. disable_nmi), and
|
|
use raw console.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_MESON
|
|
tristate "Meson serial port support"
|
|
depends on ARCH_MESON || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
This enables the driver for the on-chip UARTs of the Amlogic
|
|
MesonX processors.
|
|
|
|
config SERIAL_MESON_CONSOLE
|
|
bool "Support for console on meson"
|
|
depends on SERIAL_MESON
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Say Y here if you wish to use a Amlogic MesonX UART as the
|
|
system console (the system console is the device which
|
|
receives all kernel messages and warnings and which allows
|
|
logins in single user mode) as /dev/ttyAMLx.
|
|
|
|
config SERIAL_CLPS711X
|
|
tristate "CLPS711X serial port support"
|
|
depends on ARCH_CLPS711X || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
help
|
|
This enables the driver for the on-chip UARTs of the Cirrus
|
|
Logic EP711x/EP721x/EP731x processors.
|
|
|
|
config SERIAL_CLPS711X_CONSOLE
|
|
bool "Support for console on CLPS711X serial port"
|
|
depends on SERIAL_CLPS711X=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyCL1".
|
|
|
|
config SERIAL_SAMSUNG
|
|
tristate "Samsung SoC serial support"
|
|
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the on-chip UARTs on the Samsung
|
|
S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
|
|
/dev/ttySAC0, 1 and 2 (note, some machines may not provide all of
|
|
these ports, depending on how the serial port pins are configured.
|
|
|
|
Choose Y/M here only if you build for such SoC.
|
|
|
|
config SERIAL_SAMSUNG_UARTS_4
|
|
bool
|
|
depends on SERIAL_SAMSUNG
|
|
default y
|
|
help
|
|
Internal node for the common case of 4 Samsung compatible UARTs
|
|
|
|
config SERIAL_SAMSUNG_UARTS
|
|
int
|
|
depends on SERIAL_SAMSUNG
|
|
default 4
|
|
help
|
|
Select the number of available UART ports for the Samsung S3C
|
|
serial driver
|
|
|
|
config SERIAL_SAMSUNG_CONSOLE
|
|
bool "Support for console on Samsung SoC serial port"
|
|
depends on SERIAL_SAMSUNG
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Allow selection of the S3C24XX on-board serial ports for use as
|
|
an virtual console.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySACx". (Try "man bootparam" or see the documentation of
|
|
your boot loader about how to pass options to the kernel at
|
|
boot time.)
|
|
|
|
config SERIAL_TEGRA
|
|
tristate "NVIDIA Tegra20/30 SoC serial controller"
|
|
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
|
|
providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
|
|
provide all of these ports, depending on how the serial port
|
|
are enabled). This driver uses the APB DMA to achieve higher baudrate
|
|
and better performance.
|
|
|
|
config SERIAL_TEGRA_TCU
|
|
tristate "NVIDIA Tegra Combined UART"
|
|
depends on MAILBOX
|
|
depends on (ARCH_TEGRA && TEGRA_HSP_MBOX) || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the mailbox-based TCU (Tegra Combined UART) serial port.
|
|
TCU is a virtual serial port that allows multiplexing multiple data
|
|
streams into a single hardware serial port.
|
|
|
|
config SERIAL_TEGRA_TCU_CONSOLE
|
|
bool "Support for console on a Tegra TCU serial port"
|
|
depends on SERIAL_TEGRA_TCU=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
help
|
|
If you say Y here, it will be possible to use a the Tegra TCU as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode).
|
|
|
|
If unsure, say Y.
|
|
|
|
config SERIAL_MAX3100
|
|
tristate "MAX3100 support"
|
|
depends on SPI
|
|
select SERIAL_CORE
|
|
help
|
|
MAX3100 chip support
|
|
|
|
config SERIAL_MAX310X
|
|
tristate "MAX310X support"
|
|
depends on SPI_MASTER
|
|
select SERIAL_CORE
|
|
select REGMAP_SPI if SPI_MASTER
|
|
select REGMAP_I2C if I2C
|
|
help
|
|
This selects support for an advanced UART from Maxim (Dallas).
|
|
Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
|
|
Each IC contains 128 words each of receive and transmit FIFO
|
|
that can be controlled through I2C or high-speed SPI.
|
|
|
|
Say Y here if you want to support this ICs.
|
|
|
|
config SERIAL_DZ
|
|
bool "DECstation DZ serial driver"
|
|
depends on MACH_DECSTATION && 32BIT
|
|
select SERIAL_CORE
|
|
default y
|
|
help
|
|
DZ11-family serial controllers for DECstations and VAXstations,
|
|
including the DC7085, M7814, and M7819.
|
|
|
|
config SERIAL_DZ_CONSOLE
|
|
bool "Support console on DECstation DZ serial driver"
|
|
depends on SERIAL_DZ=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
help
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode).
|
|
|
|
Note that the firmware uses ttyS3 as the serial console on
|
|
DECstations that use this driver.
|
|
|
|
If unsure, say Y.
|
|
|
|
config SERIAL_ZS
|
|
tristate "DECstation Z85C30 serial support"
|
|
depends on MACH_DECSTATION
|
|
select SERIAL_CORE
|
|
default y
|
|
help
|
|
Support for the Zilog 85C350 serial communications controller used
|
|
for serial ports in newer DECstation systems. These include the
|
|
DECsystem 5900 and all models of the DECstation and DECsystem 5000
|
|
systems except from model 200.
|
|
|
|
If unsure, say Y. To compile this driver as a module, choose M here:
|
|
the module will be called zs.
|
|
|
|
config SERIAL_ZS_CONSOLE
|
|
bool "Support for console on a DECstation Z85C30 serial port"
|
|
depends on SERIAL_ZS=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
help
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
system console (the system console is the device which receives all
|
|
kernel messages and warnings and which allows logins in single user
|
|
mode).
|
|
|
|
Note that the firmware uses ttyS1 as the serial console on the
|
|
Maxine and ttyS3 on the others using this driver.
|
|
|
|
If unsure, say Y.
|
|
|
|
config SERIAL_21285
|
|
tristate "DC21285 serial port support"
|
|
depends on FOOTBRIDGE
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
|
|
PCI bridge you can enable its onboard serial port by enabling this
|
|
option.
|
|
|
|
config SERIAL_21285_CONSOLE
|
|
bool "Console on DC21285 serial port"
|
|
depends on SERIAL_21285=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the 21285 footbridge you can
|
|
make it the console by answering Y to this option.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyFB". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_PXA
|
|
bool "PXA serial port support (DEPRECATED)"
|
|
depends on ARCH_PXA || ARCH_MMP
|
|
select SERIAL_CORE
|
|
select SERIAL_8250_PXA if SERIAL_8250=y
|
|
select SERIAL_PXA_NON8250 if !SERIAL_8250=y
|
|
help
|
|
If you have a machine based on an Intel XScale PXA2xx CPU you
|
|
can enable its onboard serial ports by enabling this option.
|
|
|
|
Unless you have a specific need, you should use SERIAL_8250_PXA
|
|
instead of this.
|
|
|
|
config SERIAL_PXA_NON8250
|
|
bool
|
|
depends on !SERIAL_8250 || COMPILE_TEST
|
|
|
|
config SERIAL_PXA_CONSOLE
|
|
bool "Console on PXA serial port (DEPRECATED)"
|
|
depends on SERIAL_PXA
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_8250_CONSOLE if SERIAL_8250=y
|
|
help
|
|
If you have enabled the serial port on the Intel XScale PXA
|
|
CPU you can make it the console by answering Y to this option.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
Unless you have a specific need, you should use SERIAL_8250_PXA
|
|
and SERIAL_8250_CONSOLE instead of this.
|
|
|
|
config SERIAL_SA1100
|
|
bool "SA1100 serial port support"
|
|
depends on ARCH_SA1100
|
|
select SERIAL_CORE
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
help
|
|
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
|
|
can enable its onboard serial port by enabling this option.
|
|
Please read <file:Documentation/arm/sa1100/serial_uart.rst> for further
|
|
info.
|
|
|
|
config SERIAL_SA1100_CONSOLE
|
|
bool "Console on SA1100 serial port"
|
|
depends on SERIAL_SA1100
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the SA1100/SA1110 StrongARM
|
|
CPU you can make it the console by answering Y to this option.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_IMX
|
|
tristate "IMX serial port support"
|
|
depends on ARCH_MXC || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
select RATIONAL
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
help
|
|
If you have a machine based on a Motorola IMX CPU you
|
|
can enable its onboard serial port by enabling this option.
|
|
|
|
config SERIAL_IMX_CONSOLE
|
|
tristate "Console on IMX serial port"
|
|
depends on SERIAL_IMX
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the serial port on the Freescale IMX
|
|
CPU you can make it the console by answering Y/M to this option.
|
|
|
|
Even if you say Y/M here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttymxc0". (Try "man bootparam" or see the documentation of
|
|
your bootloader about how to pass options to the kernel at boot time.)
|
|
|
|
config SERIAL_IMX_EARLYCON
|
|
bool "Earlycon on IMX serial port"
|
|
depends on ARCH_MXC || COMPILE_TEST
|
|
depends on OF
|
|
select SERIAL_CORE
|
|
select SERIAL_EARLYCON
|
|
select SERIAL_CORE_CONSOLE
|
|
default y if SERIAL_IMX_CONSOLE
|
|
help
|
|
If you have enabled the earlycon on the Freescale IMX
|
|
CPU you can make it the earlycon by answering Y to this option.
|
|
|
|
config SERIAL_UARTLITE
|
|
tristate "Xilinx uartlite serial port support"
|
|
depends on HAS_IOMEM
|
|
select SERIAL_CORE
|
|
help
|
|
Say Y here if you want to use the Xilinx uartlite serial controller.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called uartlite.
|
|
|
|
config SERIAL_UARTLITE_CONSOLE
|
|
bool "Support for console on Xilinx uartlite serial port"
|
|
depends on SERIAL_UARTLITE=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Say Y here if you wish to use a Xilinx uartlite as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
config SERIAL_UARTLITE_NR_UARTS
|
|
int "Maximum number of uartlite serial ports"
|
|
depends on SERIAL_UARTLITE
|
|
range 1 256
|
|
default 1
|
|
help
|
|
Set this to the number of uartlites in your system, or the number
|
|
you think you might implement.
|
|
|
|
config SERIAL_SUNCORE
|
|
bool
|
|
depends on SPARC
|
|
select SERIAL_CORE
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
|
|
config SERIAL_SUNZILOG
|
|
tristate "Sun Zilog8530 serial support"
|
|
depends on SPARC
|
|
help
|
|
This driver supports the Zilog8530 serial ports found on many Sparc
|
|
systems. Say Y or M if you want to be able to these serial ports.
|
|
|
|
config SERIAL_SUNZILOG_CONSOLE
|
|
bool "Console on Sun Zilog8530 serial port"
|
|
depends on SERIAL_SUNZILOG=y
|
|
help
|
|
If you would like to be able to use the Zilog8530 serial port
|
|
on your Sparc system as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_SUNSU
|
|
tristate "Sun SU serial support"
|
|
depends on SPARC && PCI
|
|
help
|
|
This driver supports the 8250 serial ports that run the keyboard and
|
|
mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
|
|
to these serial ports.
|
|
|
|
config SERIAL_SUNSU_CONSOLE
|
|
bool "Console on Sun SU serial port"
|
|
depends on SERIAL_SUNSU=y
|
|
help
|
|
If you would like to be able to use the SU serial port
|
|
on your Sparc system as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_MUX
|
|
tristate "Serial MUX support"
|
|
depends on GSC
|
|
select SERIAL_CORE
|
|
default y
|
|
help
|
|
Saying Y here will enable the hardware MUX serial driver for
|
|
the Nova, K class systems and D class with a 'remote control card'.
|
|
The hardware MUX is not 8250/16550 compatible therefore the
|
|
/dev/ttyB0 device is shared between the Serial MUX and the PDC
|
|
software console. The following steps need to be completed to use
|
|
the Serial MUX:
|
|
|
|
1. create the device entry (mknod /dev/ttyB0 c 11 0)
|
|
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
|
|
3. Add device ttyB0 to /etc/securetty (if you want to log on as
|
|
root on this console.)
|
|
4. Change the kernel command console parameter to: console=ttyB0
|
|
|
|
config SERIAL_MUX_CONSOLE
|
|
bool "Support for console on serial MUX"
|
|
depends on SERIAL_MUX=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
|
|
config SERIAL_SUNSAB
|
|
tristate "Sun Siemens SAB82532 serial support"
|
|
depends on SPARC && PCI
|
|
help
|
|
This driver supports the Siemens SAB82532 DUSCC serial ports on newer
|
|
(PCI) UltraSPARC systems. Say Y or M if you want to be able to these
|
|
serial ports.
|
|
|
|
config SERIAL_SUNSAB_CONSOLE
|
|
bool "Console on Sun Siemens SAB82532 serial port"
|
|
depends on SERIAL_SUNSAB=y
|
|
help
|
|
If you would like to be able to use the SAB82532 serial port
|
|
on your Sparc system as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_SUNHV
|
|
bool "Sun4v Hypervisor Console support"
|
|
depends on SPARC64
|
|
help
|
|
This driver supports the console device found on SUN4V Sparc
|
|
systems. Say Y if you want to be able to use this device.
|
|
|
|
config SERIAL_IP22_ZILOG
|
|
tristate "SGI Zilog8530 serial support"
|
|
depends on SGI_HAS_ZILOG
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Zilog8530 serial ports found on SGI
|
|
systems. Say Y or M if you want to be able to these serial ports.
|
|
|
|
config SERIAL_IP22_ZILOG_CONSOLE
|
|
bool "Console on SGI Zilog8530 serial port"
|
|
depends on SERIAL_IP22_ZILOG=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config SERIAL_SH_SCI
|
|
tristate "SuperH SCI(F) serial port support"
|
|
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
|
|
config SERIAL_SH_SCI_NR_UARTS
|
|
int "Maximum number of SCI(F) serial ports" if EXPERT
|
|
range 1 64 if 64BIT
|
|
range 1 32 if !64BIT
|
|
depends on SERIAL_SH_SCI
|
|
default "10" if SUPERH
|
|
default "18" if ARCH_RENESAS
|
|
default "2"
|
|
|
|
config SERIAL_SH_SCI_CONSOLE
|
|
bool "Support for console on SuperH SCI(F)" if EXPERT
|
|
depends on SERIAL_SH_SCI=y
|
|
select SERIAL_CORE_CONSOLE
|
|
default y
|
|
|
|
config SERIAL_SH_SCI_EARLYCON
|
|
bool "Support for early console on SuperH SCI(F)" if EXPERT
|
|
depends on SERIAL_SH_SCI=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
default ARCH_RENESAS
|
|
|
|
config SERIAL_SH_SCI_DMA
|
|
bool "DMA support" if EXPERT
|
|
depends on SERIAL_SH_SCI && DMA_ENGINE
|
|
default ARCH_RENESAS
|
|
|
|
config SERIAL_HS_LPC32XX
|
|
tristate "LPC32XX high speed serial port support"
|
|
depends on ARCH_LPC32XX || COMPILE_TEST
|
|
depends on OF
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the LPC32XX high speed serial ports (up to 900kbps).
|
|
Those are UARTs completely different from the Standard UARTs on the
|
|
LPC32XX SoC.
|
|
Choose M or Y here to build this driver.
|
|
|
|
config SERIAL_HS_LPC32XX_CONSOLE
|
|
bool "Enable LPC32XX high speed UART serial console"
|
|
depends on SERIAL_HS_LPC32XX=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you would like to be able to use one of the high speed serial
|
|
ports on the LPC32XX as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_CORE
|
|
tristate
|
|
|
|
config SERIAL_CORE_CONSOLE
|
|
bool
|
|
|
|
config CONSOLE_POLL
|
|
bool
|
|
|
|
config SERIAL_MCF
|
|
bool "Coldfire serial support"
|
|
depends on COLDFIRE
|
|
select SERIAL_CORE
|
|
help
|
|
This serial driver supports the Freescale Coldfire serial ports.
|
|
|
|
config SERIAL_MCF_BAUDRATE
|
|
int "Default baudrate for Coldfire serial ports"
|
|
depends on SERIAL_MCF
|
|
default 19200
|
|
help
|
|
This setting lets you define what the default baudrate is for the
|
|
ColdFire serial ports. The usual default varies from board to board,
|
|
and this setting is a way of catering for that.
|
|
|
|
config SERIAL_MCF_CONSOLE
|
|
bool "Coldfire serial console support"
|
|
depends on SERIAL_MCF
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Enable a ColdFire internal serial port to be the system console.
|
|
|
|
config SERIAL_PMACZILOG
|
|
tristate "Mac or PowerMac z85c30 ESCC support"
|
|
depends on (M68K && MAC) || PPC_PMAC
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Zilog z85C30 serial ports found on
|
|
(Power)Mac machines.
|
|
Say Y or M if you want to be able to these serial ports.
|
|
|
|
config SERIAL_PMACZILOG_TTYS
|
|
bool "Use ttySn device nodes for Zilog z85c30"
|
|
depends on SERIAL_PMACZILOG
|
|
help
|
|
The pmac_zilog driver for the z85C30 chip on many powermacs
|
|
historically used the device numbers for /dev/ttySn. The
|
|
8250 serial port driver also uses these numbers, which means
|
|
the two drivers being unable to coexist; you could not use
|
|
both z85C30 and 8250 type ports at the same time.
|
|
|
|
If this option is not selected, the pmac_zilog driver will
|
|
use the device numbers allocated for /dev/ttyPZn. This allows
|
|
the pmac_zilog and 8250 drivers to co-exist, but may cause
|
|
existing userspace setups to break. Programs that need to
|
|
access the built-in serial ports on powermacs will need to
|
|
be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
|
|
|
|
If you enable this option, any z85c30 ports in the system will
|
|
be registered as ttyS0 onwards as in the past, and you will be
|
|
unable to use the 8250 module for PCMCIA or other 16C550-style
|
|
UARTs.
|
|
|
|
Say N unless you need the z85c30 ports on your (Power)Mac
|
|
to appear as /dev/ttySn.
|
|
|
|
config SERIAL_PMACZILOG_CONSOLE
|
|
bool "Console on Mac or PowerMac z85c30 serial port"
|
|
depends on SERIAL_PMACZILOG=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you would like to be able to use the z85c30 serial port
|
|
on your (Power)Mac as the console, you can do so by answering
|
|
Y to this option.
|
|
|
|
config SERIAL_CPM
|
|
tristate "CPM SCC/SMC serial port support"
|
|
depends on CPM2 || CPM1
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the SCC and SMC serial ports on Motorola
|
|
embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
|
|
|
|
config SERIAL_CPM_CONSOLE
|
|
bool "Support for console on CPM SCC/SMC serial port"
|
|
depends on SERIAL_CPM=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use a SCC or SMC CPM UART as the system
|
|
console (the system console is the device which receives all kernel
|
|
messages and warnings and which allows logins in single user mode).
|
|
|
|
Even if you say Y here, the currently visible framebuffer console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyCPM0". (Try "man bootparam" or see the documentation of
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
kernel at boot time.)
|
|
|
|
config SERIAL_PIC32
|
|
tristate "Microchip PIC32 serial support"
|
|
depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a PIC32, this driver supports the serial ports.
|
|
|
|
Say Y or M to use PIC32 serial ports, otherwise say N. Note that
|
|
to use a serial port as a console, this must be included in kernel and
|
|
not as a module.
|
|
|
|
config SERIAL_PIC32_CONSOLE
|
|
bool "PIC32 serial console support"
|
|
depends on SERIAL_PIC32=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have a PIC32, this driver supports the putting a console on one
|
|
of the serial ports.
|
|
|
|
Say Y to use the PIC32 console, otherwise say N.
|
|
|
|
config SERIAL_MPC52xx
|
|
tristate "Freescale MPC52xx/MPC512x family PSC serial support"
|
|
depends on PPC_MPC52xx || PPC_MPC512x
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports MPC52xx and MPC512x PSC serial ports. If you would
|
|
like to use them, you must answer Y or M to this option. Note that
|
|
for use as console, it must be included in kernel and not as a
|
|
module.
|
|
|
|
config SERIAL_MPC52xx_CONSOLE
|
|
bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
|
|
depends on SERIAL_MPC52xx=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Select this options if you'd like to use one of the PSC serial port
|
|
of the Freescale MPC52xx family as a console.
|
|
|
|
config SERIAL_MPC52xx_CONSOLE_BAUD
|
|
int "Freescale MPC52xx/MPC512x family PSC serial port baud"
|
|
depends on SERIAL_MPC52xx_CONSOLE=y
|
|
default "9600"
|
|
help
|
|
Select the MPC52xx console baud rate.
|
|
This value is only used if the bootloader doesn't pass in the
|
|
console baudrate
|
|
|
|
config SERIAL_ICOM
|
|
tristate "IBM Multiport Serial Adapter"
|
|
depends on PCI
|
|
depends on PPC_PSERIES || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
select FW_LOADER
|
|
help
|
|
This driver is for a family of multiport serial adapters
|
|
including 2 port RVX, 2 port internal modem, 4 port internal
|
|
modem and a split 1 port RVX and 1 port internal modem.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called icom.
|
|
|
|
config SERIAL_TXX9
|
|
bool "TMPTX39XX/49XX SIO support"
|
|
depends on HAS_TXX9_SERIAL
|
|
select SERIAL_CORE
|
|
default y
|
|
|
|
config HAS_TXX9_SERIAL
|
|
bool
|
|
|
|
config SERIAL_TXX9_NR_UARTS
|
|
int "Maximum number of TMPTX39XX/49XX SIO ports"
|
|
depends on SERIAL_TXX9
|
|
default "6"
|
|
|
|
config SERIAL_TXX9_CONSOLE
|
|
bool "TMPTX39XX/49XX SIO Console support"
|
|
depends on SERIAL_TXX9=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config SERIAL_TXX9_STDSERIAL
|
|
bool "TX39XX/49XX SIO act as standard serial"
|
|
depends on !SERIAL_8250 && SERIAL_TXX9
|
|
|
|
config SERIAL_JSM
|
|
tristate "Digi International NEO and Classic PCI Support"
|
|
depends on PCI
|
|
select SERIAL_CORE
|
|
help
|
|
This is a driver for Digi International's Neo and Classic series
|
|
of cards which provide multiple serial ports. You would need
|
|
something like this to connect more than two modems to your Linux
|
|
box, for instance in order to become a dial-in server. This driver
|
|
supports PCI boards only.
|
|
|
|
If you have a card like this, say Y here, otherwise say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called jsm.
|
|
|
|
config SERIAL_MSM
|
|
tristate "MSM on-chip serial port support"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
|
|
config SERIAL_MSM_CONSOLE
|
|
bool "MSM serial console support"
|
|
depends on SERIAL_MSM=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
|
|
config SERIAL_QCOM_GENI
|
|
tristate "QCOM on-chip GENI based serial port support"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on QCOM_GENI_SE
|
|
select SERIAL_CORE
|
|
|
|
config SERIAL_QCOM_GENI_CONSOLE
|
|
bool "QCOM GENI Serial Console support"
|
|
depends on SERIAL_QCOM_GENI
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Serial console driver for Qualcomm Technologies Inc's GENI based
|
|
QUP hardware.
|
|
|
|
config SERIAL_VT8500
|
|
bool "VIA VT8500 on-chip serial port support"
|
|
depends on ARCH_VT8500 || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
|
|
config SERIAL_VT8500_CONSOLE
|
|
bool "VIA VT8500 serial console support"
|
|
depends on SERIAL_VT8500=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config SERIAL_OMAP
|
|
tristate "OMAP serial port support"
|
|
depends on (ARCH_OMAP2PLUS && !SERIAL_8250_OMAP) || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
If you have a machine based on an Texas Instruments OMAP CPU you
|
|
can enable its onboard serial ports by enabling this option.
|
|
|
|
By enabling this option you take advantage of dma feature available
|
|
with the omap-serial driver. DMA support can be enabled from platform
|
|
data.
|
|
|
|
config SERIAL_OMAP_CONSOLE
|
|
bool "Console on OMAP serial port"
|
|
depends on SERIAL_OMAP=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Select this option if you would like to use omap serial port as
|
|
console.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttyOx". (Try "man bootparam" or see the documentation of
|
|
your boot loader about how to pass options to the kernel at
|
|
boot time.)
|
|
|
|
config SERIAL_SIFIVE
|
|
tristate "SiFive UART support"
|
|
depends on OF
|
|
default SOC_SIFIVE || SOC_CANAAN
|
|
select SERIAL_CORE
|
|
help
|
|
Select this option if you are building a kernel for a device that
|
|
contains a SiFive UART IP block. This type of UART is present on
|
|
SiFive FU540 SoCs, among others.
|
|
|
|
config SERIAL_SIFIVE_CONSOLE
|
|
bool "Console on SiFive UART"
|
|
depends on SERIAL_SIFIVE=y
|
|
default SOC_SIFIVE || SOC_CANAAN
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Select this option if you would like to use a SiFive UART as the
|
|
system console.
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySIFx". (Try "man bootparam" or see the documentation of
|
|
your boot loader about how to pass options to the kernel at
|
|
boot time.)
|
|
|
|
config SERIAL_LANTIQ
|
|
tristate "Lantiq serial driver"
|
|
depends on (LANTIQ || X86) || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
Support for UART on Lantiq and Intel SoCs.
|
|
To compile this driver as a module, select M here. The
|
|
module will be called lantiq.
|
|
|
|
config SERIAL_LANTIQ_CONSOLE
|
|
bool "Console on Lantiq UART"
|
|
depends on SERIAL_LANTIQ=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Select this option if you would like to use a Lantiq UART as the
|
|
system console.
|
|
|
|
config SERIAL_QE
|
|
tristate "Freescale QUICC Engine serial port support"
|
|
depends on QUICC_ENGINE
|
|
select SERIAL_CORE
|
|
select FW_LOADER
|
|
help
|
|
This driver supports the QE serial ports on Freescale embedded
|
|
PowerPC that contain a QUICC Engine.
|
|
|
|
config SERIAL_SCCNXP
|
|
tristate "SCCNXP serial port support"
|
|
select SERIAL_CORE
|
|
help
|
|
This selects support for an advanced UART from NXP (Philips).
|
|
Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
|
|
SC28L202, SCC68681 and SCC68692.
|
|
|
|
config SERIAL_SCCNXP_CONSOLE
|
|
bool "Console on SCCNXP serial port"
|
|
depends on SERIAL_SCCNXP=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Support for console on SCCNXP serial ports.
|
|
|
|
config SERIAL_SC16IS7XX_CORE
|
|
tristate
|
|
|
|
config SERIAL_SC16IS7XX
|
|
tristate "SC16IS7xx serial support"
|
|
select SERIAL_CORE
|
|
depends on (SPI_MASTER && !I2C) || I2C
|
|
help
|
|
This selects support for SC16IS7xx serial ports.
|
|
Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
|
|
SC16IS760 and SC16IS762. Select supported buses using options below.
|
|
|
|
config SERIAL_SC16IS7XX_I2C
|
|
bool "SC16IS7xx for I2C interface"
|
|
depends on SERIAL_SC16IS7XX
|
|
depends on I2C
|
|
select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
|
|
select REGMAP_I2C if I2C
|
|
default y
|
|
help
|
|
Enable SC16IS7xx driver on I2C bus,
|
|
If required say y, and say n to i2c if not required,
|
|
Enabled by default to support oldconfig.
|
|
You must select at least one bus for the driver to be built.
|
|
|
|
config SERIAL_SC16IS7XX_SPI
|
|
bool "SC16IS7xx for spi interface"
|
|
depends on SERIAL_SC16IS7XX
|
|
depends on SPI_MASTER
|
|
select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
|
|
select REGMAP_SPI if SPI_MASTER
|
|
help
|
|
Enable SC16IS7xx driver on SPI bus,
|
|
If required say y, and say n to spi if not required,
|
|
This is additional support to existing driver.
|
|
You must select at least one bus for the driver to be built.
|
|
|
|
config SERIAL_TIMBERDALE
|
|
tristate "Support for timberdale UART"
|
|
select SERIAL_CORE
|
|
depends on X86_32 || COMPILE_TEST
|
|
help
|
|
Add support for UART controller on timberdale.
|
|
|
|
config SERIAL_BCM63XX
|
|
tristate "Broadcom BCM63xx/BCM33xx UART support"
|
|
select SERIAL_CORE
|
|
depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
|
|
default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
|
|
help
|
|
This enables the driver for the onchip UART core found on
|
|
the following chipsets:
|
|
|
|
BCM33xx (cable modem)
|
|
BCM63xx/BCM63xxx (DSL)
|
|
BCM68xx (PON)
|
|
BCM7xxx (STB) - DOCSIS console
|
|
|
|
config SERIAL_BCM63XX_CONSOLE
|
|
bool "Console on BCM63xx serial port"
|
|
depends on SERIAL_BCM63XX=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
If you have enabled the serial port on the BCM63xx CPU
|
|
you can make it the console by answering Y to this option.
|
|
|
|
config SERIAL_GRLIB_GAISLER_APBUART
|
|
tristate "GRLIB APBUART serial support"
|
|
depends on OF && SPARC
|
|
select SERIAL_CORE
|
|
help
|
|
Add support for the GRLIB APBUART serial port.
|
|
|
|
config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
|
|
bool "Console on GRLIB APBUART serial port"
|
|
depends on SERIAL_GRLIB_GAISLER_APBUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Support for running a console on the GRLIB APBUART
|
|
|
|
config SERIAL_ALTERA_JTAGUART
|
|
tristate "Altera JTAG UART support"
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Altera JTAG UART port.
|
|
|
|
config SERIAL_ALTERA_JTAGUART_CONSOLE
|
|
bool "Altera JTAG UART console support"
|
|
depends on SERIAL_ALTERA_JTAGUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Enable a Altera JTAG UART port to be the system console.
|
|
|
|
config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
|
|
bool "Bypass output when no connection"
|
|
depends on SERIAL_ALTERA_JTAGUART_CONSOLE
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Bypass console output and keep going even if there is no
|
|
JTAG terminal connection with the host.
|
|
|
|
config SERIAL_ALTERA_UART
|
|
tristate "Altera UART support"
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Altera softcore UART port.
|
|
|
|
config SERIAL_ALTERA_UART_MAXPORTS
|
|
int "Maximum number of Altera UART ports"
|
|
depends on SERIAL_ALTERA_UART
|
|
default 4
|
|
help
|
|
This setting lets you define the maximum number of the Altera
|
|
UART ports. The usual default varies from board to board, and
|
|
this setting is a way of catering for that.
|
|
|
|
config SERIAL_ALTERA_UART_BAUDRATE
|
|
int "Default baudrate for Altera UART ports"
|
|
depends on SERIAL_ALTERA_UART
|
|
default 115200
|
|
help
|
|
This setting lets you define what the default baudrate is for the
|
|
Altera UART ports. The usual default varies from board to board,
|
|
and this setting is a way of catering for that.
|
|
|
|
config SERIAL_ALTERA_UART_CONSOLE
|
|
bool "Altera UART console support"
|
|
depends on SERIAL_ALTERA_UART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Enable a Altera UART port to be the system console.
|
|
|
|
config SERIAL_PCH_UART
|
|
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
|
|
depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
|
|
select SERIAL_CORE
|
|
help
|
|
This driver is for PCH(Platform controller Hub) UART of Intel EG20T
|
|
which is an IOH(Input/Output Hub) for x86 embedded processor.
|
|
Enabling PCH_DMA, this PCH UART works as DMA mode.
|
|
|
|
This driver also can be used for LAPIS Semiconductor IOH(Input/
|
|
Output Hub), ML7213, ML7223 and ML7831.
|
|
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
|
|
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
|
|
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
|
|
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
|
|
|
|
config SERIAL_PCH_UART_CONSOLE
|
|
bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
|
|
depends on SERIAL_PCH_UART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Say Y here if you wish to use the PCH UART as the system console
|
|
(the system console is the device which receives all kernel messages and
|
|
warnings and which allows logins in single user mode).
|
|
|
|
config SERIAL_MXS_AUART
|
|
tristate "MXS AUART support"
|
|
depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
help
|
|
This driver supports the MXS and Alphascale ASM9260 Application
|
|
UART (AUART) port.
|
|
|
|
config SERIAL_MXS_AUART_CONSOLE
|
|
bool "MXS AUART console support"
|
|
depends on SERIAL_MXS_AUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Enable a MXS AUART port to be the system console.
|
|
|
|
config SERIAL_XILINX_PS_UART
|
|
tristate "Cadence (Xilinx Zynq) UART support"
|
|
depends on OF
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Cadence UART. It is found e.g. in Xilinx
|
|
Zynq.
|
|
|
|
config SERIAL_XILINX_PS_UART_CONSOLE
|
|
bool "Cadence UART console support"
|
|
depends on SERIAL_XILINX_PS_UART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Enable a Cadence UART port to be the system console.
|
|
|
|
config SERIAL_AR933X
|
|
tristate "AR933X serial port support"
|
|
depends on (HAVE_CLK && ATH79) || (MIPS && COMPILE_TEST)
|
|
select SERIAL_CORE
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
help
|
|
If you have an Atheros AR933X SOC based board and want to use the
|
|
built-in UART of the SoC, say Y to this option.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ar933x_uart.
|
|
|
|
config SERIAL_AR933X_CONSOLE
|
|
bool "Console on AR933X serial port"
|
|
depends on SERIAL_AR933X=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
Enable a built-in UART port of the AR933X to be the system console.
|
|
|
|
config SERIAL_AR933X_NR_UARTS
|
|
int "Maximum number of AR933X serial ports"
|
|
depends on SERIAL_AR933X
|
|
default "2"
|
|
help
|
|
Set this to the number of serial ports you want the driver
|
|
to support.
|
|
|
|
config SERIAL_MPS2_UART_CONSOLE
|
|
bool "MPS2 UART console support"
|
|
depends on SERIAL_MPS2_UART
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
|
|
config SERIAL_MPS2_UART
|
|
bool "MPS2 UART port"
|
|
depends on ARCH_MPS2 || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
This driver support the UART ports on ARM MPS2.
|
|
|
|
config SERIAL_ARC
|
|
tristate "ARC UART driver support"
|
|
select SERIAL_CORE
|
|
help
|
|
Driver for on-chip UART for ARC(Synopsys) for the legacy
|
|
FPGA Boards (ML50x/ARCAngel4)
|
|
|
|
config SERIAL_ARC_CONSOLE
|
|
bool "Console on ARC UART"
|
|
depends on SERIAL_ARC=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Enable system Console on ARC UART
|
|
|
|
config SERIAL_ARC_NR_PORTS
|
|
int "Number of ARC UART ports"
|
|
depends on SERIAL_ARC
|
|
range 1 3
|
|
default "1"
|
|
help
|
|
Set this to the number of serial ports you want the driver
|
|
to support.
|
|
|
|
config SERIAL_RP2
|
|
tristate "Comtrol RocketPort EXPRESS/INFINITY support"
|
|
depends on PCI
|
|
select SERIAL_CORE
|
|
help
|
|
This driver supports the Comtrol RocketPort EXPRESS and
|
|
RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
|
|
These adapters use a "RocketPort 2" ASIC that is not compatible
|
|
with the original RocketPort driver (CONFIG_ROCKETPORT).
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called rp2.
|
|
|
|
If you want to compile this driver into the kernel, say Y here. If
|
|
you don't have a suitable RocketPort card installed, say N.
|
|
|
|
config SERIAL_RP2_NR_UARTS
|
|
int "Maximum number of RocketPort EXPRESS/INFINITY ports"
|
|
depends on SERIAL_RP2
|
|
default "32"
|
|
help
|
|
If multiple cards are present, the default limit of 32 ports may
|
|
need to be increased.
|
|
|
|
config SERIAL_FSL_LPUART
|
|
tristate "Freescale lpuart serial port support"
|
|
depends on HAS_DMA
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the on-chip lpuart on some Freescale SOCs.
|
|
|
|
config SERIAL_FSL_LPUART_CONSOLE
|
|
bool "Console on Freescale lpuart serial port"
|
|
depends on SERIAL_FSL_LPUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
If you have enabled the lpuart serial port on the Freescale SoCs,
|
|
you can make it the console by answering Y to this option.
|
|
|
|
config SERIAL_FSL_LINFLEXUART
|
|
tristate "Freescale LINFlexD UART serial port support"
|
|
depends on PRINTK
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the on-chip LINFlexD UART on some Freescale SOCs.
|
|
|
|
config SERIAL_FSL_LINFLEXUART_CONSOLE
|
|
bool "Console on Freescale LINFlexD UART serial port"
|
|
depends on SERIAL_FSL_LINFLEXUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
If you have enabled the LINFlexD UART serial port on the Freescale
|
|
SoCs, you can make it the console by answering Y to this option.
|
|
|
|
config SERIAL_CONEXANT_DIGICOLOR
|
|
tristate "Conexant Digicolor CX92xxx USART serial port support"
|
|
depends on OF
|
|
select SERIAL_CORE
|
|
help
|
|
Support for the on-chip USART on Conexant Digicolor SoCs.
|
|
|
|
config SERIAL_CONEXANT_DIGICOLOR_CONSOLE
|
|
bool "Console on Conexant Digicolor serial port"
|
|
depends on SERIAL_CONEXANT_DIGICOLOR=y
|
|
select SERIAL_CORE_CONSOLE
|
|
help
|
|
If you have enabled the USART serial port on Conexant Digicolor
|
|
SoCs, you can make it the console by answering Y to this option.
|
|
|
|
config SERIAL_ST_ASC
|
|
tristate "ST ASC serial port support"
|
|
select SERIAL_CORE
|
|
depends on ARM || COMPILE_TEST
|
|
help
|
|
This driver is for the on-chip Asynchronous Serial Controller on
|
|
STMicroelectronics STi SoCs.
|
|
ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
|
|
It support all industry standard baud rates.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_ST_ASC_CONSOLE
|
|
bool "Support for console on ST ASC"
|
|
depends on SERIAL_ST_ASC=y
|
|
select SERIAL_CORE_CONSOLE
|
|
|
|
config SERIAL_MEN_Z135
|
|
tristate "MEN 16z135 Support"
|
|
select SERIAL_CORE
|
|
depends on MCB
|
|
help
|
|
Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
|
|
on a MCB carrier.
|
|
|
|
This driver can also be build as a module. If so, the module will be called
|
|
men_z135_uart.ko
|
|
|
|
config SERIAL_SPRD
|
|
tristate "Support for Spreadtrum serial"
|
|
select SERIAL_CORE
|
|
depends on COMMON_CLK
|
|
help
|
|
This enables the driver for the Spreadtrum's serial.
|
|
|
|
config SERIAL_SPRD_CONSOLE
|
|
bool "Spreadtrum UART console support"
|
|
depends on SERIAL_SPRD=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Support for early debug console using Spreadtrum's serial. This enables
|
|
the console before standard serial driver is probed. This is enabled
|
|
with "earlycon" on the kernel command line. The console is
|
|
enabled when early_param is processed.
|
|
|
|
config SERIAL_STM32
|
|
tristate "STMicroelectronics STM32 serial port support"
|
|
select SERIAL_CORE
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
select SERIAL_MCTRL_GPIO if GPIOLIB
|
|
help
|
|
This driver is for the on-chip Serial Controller on
|
|
STMicroelectronics STM32 MCUs.
|
|
USART supports Rx & Tx functionality.
|
|
It support all industry standard baud rates.
|
|
|
|
If unsure, say N.
|
|
|
|
config SERIAL_STM32_CONSOLE
|
|
bool "Support for console on STM32"
|
|
depends on SERIAL_STM32=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
|
|
config SERIAL_MVEBU_UART
|
|
bool "Marvell EBU serial port support"
|
|
depends on ARCH_MVEBU || COMPILE_TEST
|
|
depends on COMMON_CLK
|
|
select SERIAL_CORE
|
|
help
|
|
This driver is for Marvell EBU SoC's UART. If you have a machine
|
|
based on the Armada-3700 SoC and wish to use the on-board serial
|
|
port,
|
|
say 'Y' here.
|
|
Otherwise, say 'N'.
|
|
|
|
config SERIAL_MVEBU_CONSOLE
|
|
bool "Console on Marvell EBU serial port"
|
|
depends on SERIAL_MVEBU_UART
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
default y
|
|
help
|
|
Say 'Y' here if you wish to use Armada-3700 UART as the system console.
|
|
(the system console is the device which receives all kernel messages
|
|
and warnings and which allows logins in single user mode)
|
|
Otherwise, say 'N'.
|
|
|
|
config SERIAL_OWL
|
|
tristate "Actions Semi Owl serial port support"
|
|
depends on ARCH_ACTIONS || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
This driver is for Actions Semiconductor S500/S900 SoC's UART.
|
|
Say 'Y' here if you wish to use the on-board serial port.
|
|
Otherwise, say 'N'.
|
|
|
|
config SERIAL_OWL_CONSOLE
|
|
bool "Console on Actions Semi Owl serial port"
|
|
depends on SERIAL_OWL=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
default y
|
|
help
|
|
Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
|
|
as the system console.
|
|
|
|
config SERIAL_RDA
|
|
bool "RDA Micro serial port support"
|
|
depends on ARCH_RDA || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
This driver is for RDA8810PL SoC's UART.
|
|
Say 'Y' here if you wish to use the on-board serial port.
|
|
Otherwise, say 'N'.
|
|
|
|
config SERIAL_RDA_CONSOLE
|
|
bool "Console on RDA Micro serial port"
|
|
depends on SERIAL_RDA=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
default y
|
|
help
|
|
Say 'Y' here if you wish to use the RDA8810PL UART as the system
|
|
console. Only earlycon is implemented currently.
|
|
|
|
config SERIAL_MILBEAUT_USIO
|
|
tristate "Milbeaut USIO/UART serial port support"
|
|
depends on ARCH_MILBEAUT || (COMPILE_TEST && OF)
|
|
default ARCH_MILBEAUT
|
|
select SERIAL_CORE
|
|
help
|
|
This selects the USIO/UART IP found in Socionext Milbeaut SoCs.
|
|
|
|
config SERIAL_MILBEAUT_USIO_PORTS
|
|
int "Maximum number of CSIO/UART ports (1-8)"
|
|
range 1 8
|
|
depends on SERIAL_MILBEAUT_USIO
|
|
default "4"
|
|
|
|
config SERIAL_MILBEAUT_USIO_CONSOLE
|
|
bool "Support for console on MILBEAUT USIO/UART serial port"
|
|
depends on SERIAL_MILBEAUT_USIO=y
|
|
default y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut
|
|
SoCs as the system console (the system console is the device which
|
|
receives all kernel messages and warnings and which allows logins in
|
|
single user mode).
|
|
|
|
config SERIAL_LITEUART
|
|
tristate "LiteUART serial port support"
|
|
depends on HAS_IOMEM
|
|
depends on OF
|
|
depends on LITEX || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
This driver is for the FPGA-based LiteUART serial controller from LiteX
|
|
SoC builder.
|
|
|
|
Say 'Y' or 'M' here if you wish to use the LiteUART serial controller.
|
|
Otherwise, say 'N'.
|
|
|
|
config SERIAL_LITEUART_MAX_PORTS
|
|
int "Maximum number of LiteUART ports"
|
|
depends on SERIAL_LITEUART
|
|
default "1"
|
|
help
|
|
Set this to the maximum number of serial ports you want the driver
|
|
to support.
|
|
|
|
config SERIAL_LITEUART_CONSOLE
|
|
bool "LiteUART serial port console support"
|
|
depends on SERIAL_LITEUART=y
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
|
|
controller from LiteX SoC builder as the system console
|
|
(the system console is the device which receives all kernel messages
|
|
and warnings and which allows logins in single user mode).
|
|
Otherwise, say 'N'.
|
|
|
|
config SERIAL_SUNPLUS
|
|
tristate "Sunplus UART support"
|
|
depends on ARCH_SUNPLUS || COMPILE_TEST
|
|
select SERIAL_CORE
|
|
help
|
|
Select this option if you would like to use Sunplus serial port on
|
|
Sunplus SoC SP7021.
|
|
If you enable this option, Sunplus serial ports in the system will
|
|
be registered as ttySUPx.
|
|
This driver can also be built as a module. If so, the module will be
|
|
called sunplus-uart.
|
|
|
|
config SERIAL_SUNPLUS_CONSOLE
|
|
bool "Console on Sunplus UART"
|
|
depends on SERIAL_SUNPLUS
|
|
select SERIAL_CORE_CONSOLE
|
|
select SERIAL_EARLYCON
|
|
help
|
|
Select this option if you would like to use a Sunplus UART as the
|
|
system console.
|
|
Even if you say Y here, the currently visible virtual console
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
you can alter that using a kernel command line option such as
|
|
"console=ttySUPx".
|
|
|
|
endmenu
|
|
|
|
config SERIAL_MCTRL_GPIO
|
|
tristate
|