165 lines
5.1 KiB
YAML
165 lines
5.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Moortec Semiconductor MR75203 PVT Controller
|
|
|
|
maintainers:
|
|
- Rahul Tanwar <rtanwar@maxlinear.com>
|
|
|
|
description: |
|
|
A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
|
|
include many different units.
|
|
Such a design will usually consists of several Moortec's embedded analog IPs,
|
|
and a single Moortec controller (mr75203) to configure and control the IPs.
|
|
|
|
Some of the Moortec's analog hard IPs that can be used in a design:
|
|
*) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
|
|
*) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
|
|
*) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
|
|
*) Delay Chain - ring oscillator connected to the PD, used to measure IO
|
|
based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
|
|
oscillator at 1.8V).
|
|
*) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
|
|
be presented for VM for measurement within its range (e.g. mr76006 -
|
|
divide by 2 pre-scaler).
|
|
|
|
TS, VM & PD also include a digital interface, which consists of configuration
|
|
inputs and measurement outputs.
|
|
|
|
Some of the units have number of series, each series can have slightly
|
|
different characteristics.
|
|
|
|
The mr75203 binding describes configuration for the controller unit, but also
|
|
for some of the analog IPs.
|
|
|
|
properties:
|
|
compatible:
|
|
const: moortec,mr75203
|
|
|
|
reg:
|
|
items:
|
|
- description: PVT common registers
|
|
- description: PVT temprature sensor registers
|
|
- description: PVT process detector registers
|
|
- description: PVT voltage monitor registers
|
|
|
|
reg-names:
|
|
items:
|
|
- const: common
|
|
- const: ts
|
|
- const: pd
|
|
- const: vm
|
|
|
|
intel,vm-map:
|
|
description:
|
|
PVT controller has 5 VM (voltage monitor) sensors.
|
|
vm-map defines CPU core to VM instance mapping. A
|
|
value of 0xff means that VM sensor is unused.
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
maxItems: 5
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
"#thermal-sensor-cells":
|
|
const: 1
|
|
|
|
moortec,vm-active-channels:
|
|
description:
|
|
Defines the number of channels per VM that are actually used and are
|
|
connected to some input source.
|
|
Maximum number of items - number of VMs.
|
|
Maximum value of each item - number of channels.
|
|
Minimum value of each item - 0 (which means entire VM sensor is not used).
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
|
|
moortec,vm-pre-scaler-x2:
|
|
description:
|
|
Defines the channels that use a mr76006 pre-scaler to divide the input
|
|
source by 2.
|
|
The pre-scaler is used for input sources that exceed the VM input range.
|
|
The driver uses this information to present to the user with the actual
|
|
value of the voltage source.
|
|
For channels that are not listed, no pre-scaler is assumed.
|
|
Maximum number of items - total number of channels in all VMs.
|
|
Each channel should not appear more than once.
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
|
|
moortec,ts-series:
|
|
description:
|
|
Definition of the temperature equation and coefficients that shall be
|
|
used to convert the digital output to value in milli-Celsius.
|
|
minimum: 5
|
|
maximum: 6
|
|
default: 5
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
moortec,ts-coeff-g:
|
|
description:
|
|
G coefficient for temperature equation.
|
|
Default for series 5 = 60000
|
|
Default for series 6 = 57400
|
|
multipleOf: 1000
|
|
minimum: 1000
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
moortec,ts-coeff-h:
|
|
description:
|
|
H coefficient for temperature equation.
|
|
Default for series 5 = 200000
|
|
Default for series 6 = 249400
|
|
multipleOf: 1000
|
|
minimum: 1000
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
moortec,ts-coeff-cal5:
|
|
description:
|
|
cal5 coefficient for temperature equation.
|
|
Default for series 5 = 4094
|
|
Default for series 6 = 4096
|
|
minimum: 1
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
moortec,ts-coeff-j:
|
|
description:
|
|
J coefficient for temperature equation.
|
|
Default for series 5 = -100
|
|
Default for series 6 = 0
|
|
multipleOf: 1000
|
|
maximum: 0
|
|
$ref: /schemas/types.yaml#/definitions/int32
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
- clocks
|
|
- "#thermal-sensor-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
pvt: pvt@e0680000 {
|
|
compatible = "moortec,mr75203";
|
|
reg = <0xe0680000 0x80>,
|
|
<0xe0680080 0x180>,
|
|
<0xe0680200 0x200>,
|
|
<0xe0680400 0xc00>;
|
|
reg-names = "common", "ts", "pd", "vm";
|
|
intel,vm-map = [03 01 04 ff ff];
|
|
clocks = <&osc0>;
|
|
resets = <&rcu0 0x40 7>;
|
|
moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
|
|
moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
|
|
moortec,ts-coeff-g = <61400>;
|
|
moortec,ts-coeff-h = <253700>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|