135 lines
2.9 KiB
YAML
135 lines
2.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/ovti,ov772x.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Omnivision OV7720/OV7725 CMOS sensor
|
|
|
|
maintainers:
|
|
- Jacopo Mondi <jacopo@jmondi.org>
|
|
|
|
description: |
|
|
The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
|
|
such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
|
|
support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- ovti,ov7720
|
|
- ovti,ov7725
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
description: |
|
|
Reference to the GPIO connected to the RSTB pin which is active low.
|
|
maxItems: 1
|
|
|
|
powerdown-gpios:
|
|
description: |
|
|
Reference to the GPIO connected to the PWDN pin which is active high.
|
|
maxItems: 1
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
description: |
|
|
Video output port.
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
bus-type:
|
|
enum: [5, 6]
|
|
|
|
bus-width:
|
|
enum: [8, 10]
|
|
default: 10
|
|
|
|
data-shift:
|
|
enum: [0, 2]
|
|
default: 0
|
|
|
|
hsync-active:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
vsync-active:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
pclk-sample:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
bus-type:
|
|
const: 6
|
|
then:
|
|
properties:
|
|
hsync-active: false
|
|
vsync-active: false
|
|
|
|
- if:
|
|
properties:
|
|
bus-width:
|
|
const: 10
|
|
then:
|
|
properties:
|
|
data-shift:
|
|
const: 0
|
|
|
|
required:
|
|
- bus-type
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/media/video-interfaces.h>
|
|
|
|
i2c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ov772x: camera@21 {
|
|
compatible = "ovti,ov7725";
|
|
reg = <0x21>;
|
|
reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
|
|
powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
|
|
clocks = <&xclk>;
|
|
|
|
port {
|
|
ov772x_0: endpoint {
|
|
bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
|
|
vsync-active = <0>;
|
|
hsync-active = <0>;
|
|
pclk-sample = <0>;
|
|
bus-width = <8>;
|
|
data-shift = <0>;
|
|
remote-endpoint = <&vcap1_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|