81 lines
2.6 KiB
YAML
81 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Peripheral properties for Intel IXP4xx Expansion Bus
|
|
|
|
description:
|
|
The IXP4xx expansion bus controller handles access to devices on the
|
|
memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
|
|
including IXP42x, IXP43x, IXP45x and IXP46x.
|
|
|
|
maintainers:
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
properties:
|
|
intel,ixp4xx-eb-t1:
|
|
description: Address timing, extend address phase with n cycles.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 3
|
|
|
|
intel,ixp4xx-eb-t2:
|
|
description: Setup chip select timing, extend setup phase with n cycles.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 3
|
|
|
|
intel,ixp4xx-eb-t3:
|
|
description: Strobe timing, extend strobe phase with n cycles.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 15
|
|
|
|
intel,ixp4xx-eb-t4:
|
|
description: Hold timing, extend hold phase with n cycles.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 3
|
|
|
|
intel,ixp4xx-eb-t5:
|
|
description: Recovery timing, extend recovery phase with n cycles.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 15
|
|
|
|
intel,ixp4xx-eb-cycle-type:
|
|
description: The type of cycles to use on the expansion bus for this
|
|
chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2]
|
|
|
|
intel,ixp4xx-eb-byte-access-on-halfword:
|
|
description: Allow byte read access on half word devices.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
intel,ixp4xx-eb-hpi-hrdy-pol-high:
|
|
description: Set HPI HRDY polarity to active high when using HPI.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
intel,ixp4xx-eb-mux-address-and-data:
|
|
description: Multiplex address and data on the data bus.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
intel,ixp4xx-eb-ahb-split-transfers:
|
|
description: Enable AHB split transfers.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
intel,ixp4xx-eb-write-enable:
|
|
description: Enable write cycles.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
intel,ixp4xx-eb-byte-access:
|
|
description: Expansion bus uses only 8 bits. The default is to use
|
|
16 bits.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
additionalProperties: true
|