linux-zen-server/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml

82 lines
2.5 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom BCM4377 family PCIe Bluetooth Chips
maintainers:
- Sven Peter <sven@svenpeter.dev>
description:
This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
usually found in Apple machines. The Wi-Fi part of the chip is described in
bindings/net/wireless/brcm,bcm4329-fmac.yaml.
allOf:
- $ref: bluetooth-controller.yaml#
properties:
compatible:
enum:
- pci14e4,5fa0 # BCM4377
- pci14e4,5f69 # BCM4378
- pci14e4,5f71 # BCM4387
reg:
maxItems: 1
brcm,board-type:
$ref: /schemas/types.yaml#/definitions/string
description: Board type of the Bluetooth chip. This is used to decouple
the overall system board from the Bluetooth module and used to construct
firmware and calibration data filenames.
On Apple platforms, this should be the Apple module-instance codename
prefixed by "apple,", e.g. "apple,atlantisb".
pattern: '^apple,.*'
brcm,taurus-cal-blob:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: A per-device calibration blob for the Bluetooth radio. This
should be filled in by the bootloader from platform configuration
data, if necessary, and will be uploaded to the device.
This blob is used if the chip stepping of the Bluetooth module does not
support beamforming.
brcm,taurus-bf-cal-blob:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: A per-device calibration blob for the Bluetooth radio. This
should be filled in by the bootloader from platform configuration
data, if necessary, and will be uploaded to the device.
This blob is used if the chip stepping of the Bluetooth module supports
beamforming.
local-bd-address: true
required:
- compatible
- reg
- local-bd-address
- brcm,board-type
additionalProperties: false
examples:
- |
pcie@a0000000 {
#address-cells = <3>;
#size-cells = <2>;
reg = <0xa0000000 0x1000000>;
device_type = "pci";
ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
bluetooth@0,1 {
compatible = "pci14e4,5f69";
reg = <0x100 0x0 0x0 0x0 0x0>;
brcm,board-type = "apple,honshu";
/* To be filled by the bootloader */
local-bd-address = [00 00 00 00 00 00];
};
};