181 lines
5.0 KiB
YAML
181 lines
5.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Canaan Kendryte K210 FPIOA
|
|
|
|
maintainers:
|
|
- Damien Le Moal <damien.lemoal@wdc.com>
|
|
|
|
description:
|
|
The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)
|
|
controller allows assiging any of 256 possible functions to any of
|
|
48 IO pins of the SoC. Pin function configuration is performed on
|
|
a per-pin basis.
|
|
|
|
properties:
|
|
compatible:
|
|
const: canaan,k210-fpioa
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description:
|
|
Address and length of the register set for the FPIOA controller.
|
|
|
|
clocks:
|
|
items:
|
|
- description: Controller reference clock source
|
|
- description: APB interface clock source
|
|
|
|
clock-names:
|
|
items:
|
|
- const: ref
|
|
- const: pclk
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
canaan,k210-sysctl-power:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
items:
|
|
- items:
|
|
- description: phandle of the K210 system controller node
|
|
- description: offset of its power domain control register
|
|
description: |
|
|
phandle of the K210 system controller node and offset of its
|
|
power domain control register.
|
|
|
|
patternProperties:
|
|
'-pinmux$':
|
|
type: object
|
|
$ref: /schemas/pinctrl/pinmux-node.yaml
|
|
description:
|
|
FPIOA client devices use sub-nodes to define the desired pin
|
|
configuration. Client device sub-nodes use the pinux property
|
|
below.
|
|
|
|
properties:
|
|
pinmux:
|
|
description:
|
|
List of IO pins alternate functions. The values for each IO
|
|
pin is a combination of an IO pin number (0 to 47) with the
|
|
desired function for the IO pin. Functions are defined as
|
|
macros in include/dt-bindings/pinctrl/k210-fpioa.h.
|
|
The K210_FPIOA(IO pin, function) macro is provided to
|
|
facilitate the combination of IO pin numbers and functions.
|
|
|
|
required:
|
|
- pinmux
|
|
|
|
additionalProperties: false
|
|
|
|
'-pins$':
|
|
type: object
|
|
$ref: /schemas/pinctrl/pincfg-node.yaml
|
|
description:
|
|
FPIOA client devices use sub-nodes to define the desired
|
|
configuration of pins. Client device sub-nodes use the
|
|
properties below.
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of IO pins affected by the properties specified in this
|
|
subnode. IO pins are identified using the pin names "IO_xx".
|
|
Pin configuration nodes can also define the power domain to
|
|
be used for the SoC pin groups A0 (IO pins 0-5),
|
|
A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23),
|
|
B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35),
|
|
C0 (IO pins 36-41) and C1 (IO pins 42-47) using the
|
|
power-source property.
|
|
items:
|
|
anyOf:
|
|
- pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$"
|
|
- enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7,
|
|
IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14,
|
|
IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21,
|
|
IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28,
|
|
IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35,
|
|
IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42,
|
|
IO_43, IO_44, IO_45, IO_46, IO_47,
|
|
A0, A1, A2, B3, B4, B5, C6, C7 ]
|
|
bias-disable: true
|
|
|
|
bias-pull-down: true
|
|
|
|
bias-pull-up: true
|
|
|
|
drive-strength: true
|
|
|
|
drive-strength-microamp: true
|
|
|
|
input-enable: true
|
|
|
|
input-disable: true
|
|
|
|
input-schmitt-enable: true
|
|
|
|
input-schmitt-disable: true
|
|
|
|
input-polarity-invert:
|
|
type: boolean
|
|
description:
|
|
Enable or disable pin input polarity inversion.
|
|
|
|
output-enable: true
|
|
|
|
output-disable: true
|
|
|
|
output-high: true
|
|
|
|
output-low: true
|
|
|
|
output-polarity-invert:
|
|
type: boolean
|
|
description:
|
|
Enable or disable pin output polarity inversion.
|
|
|
|
slew-rate: true
|
|
|
|
power-source: true
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: "pinctrl.yaml#"
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- canaan,k210-sysctl-power
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/pinctrl/k210-fpioa.h>
|
|
#include <dt-bindings/clock/k210-clk.h>
|
|
#include <dt-bindings/reset/k210-rst.h>
|
|
|
|
fpioa: pinmux@502b0000 {
|
|
compatible = "canaan,k210-fpioa";
|
|
reg = <0x502b0000 0x100>;
|
|
clocks = <&sysclk K210_CLK_FPIOA>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "ref", "pclk";
|
|
resets = <&sysrst K210_RST_FPIOA>;
|
|
canaan,k210-sysctl-power = <&sysctl 108>;
|
|
pinctrl-0 = <&jtag_pinctrl>;
|
|
pinctrl-names = "default";
|
|
|
|
jtag_pinctrl: jtag-pinmux {
|
|
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
|
|
<K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
|
|
<K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
|
|
<K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
|
|
};
|
|
};
|