232 lines
7.3 KiB
YAML
232 lines
7.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Mediatek MT8183 Pin Controller
|
|
|
|
maintainers:
|
|
- Sean Wang <sean.wang@kernel.org>
|
|
|
|
description: |+
|
|
The MediaTek's MT8183 Pin controller is used to control SoC pins.
|
|
|
|
properties:
|
|
compatible:
|
|
const: mediatek,mt8183-pinctrl
|
|
|
|
reg:
|
|
minItems: 10
|
|
maxItems: 10
|
|
|
|
reg-names:
|
|
items:
|
|
- const: iocfg0
|
|
- const: iocfg1
|
|
- const: iocfg2
|
|
- const: iocfg3
|
|
- const: iocfg4
|
|
- const: iocfg5
|
|
- const: iocfg6
|
|
- const: iocfg7
|
|
- const: iocfg8
|
|
- const: eint
|
|
|
|
gpio-controller: true
|
|
|
|
"#gpio-cells":
|
|
const: 2
|
|
description: |
|
|
Number of cells in GPIO specifier. Since the generic GPIO
|
|
binding is used, the amount of cells must be specified as 2. See the below
|
|
mentioned gpio binding representation for description of particular cells.
|
|
|
|
gpio-ranges:
|
|
minItems: 1
|
|
maxItems: 5
|
|
description: |
|
|
GPIO valid number range.
|
|
|
|
interrupt-controller: true
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
"#interrupt-cells":
|
|
const: 2
|
|
|
|
allOf:
|
|
- $ref: "pinctrl.yaml#"
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpio-controller
|
|
- "#gpio-cells"
|
|
- gpio-ranges
|
|
|
|
patternProperties:
|
|
'-pins(-[a-z]+)?$':
|
|
type: object
|
|
additionalProperties: false
|
|
patternProperties:
|
|
'^pins':
|
|
type: object
|
|
additionalProperties: false
|
|
description: |
|
|
A pinctrl node should contain at least one subnodes representing the
|
|
pinctrl groups available on the machine. Each subnode will list the
|
|
pins it needs, and how they should be configured, with regard to muxer
|
|
configuration, pullups, drive strength, input enable/disable and input
|
|
schmitt.
|
|
$ref: "/schemas/pinctrl/pincfg-node.yaml"
|
|
|
|
properties:
|
|
pinmux:
|
|
description:
|
|
integer array, represents gpio pin number and mux setting.
|
|
Supported pin number and mux varies for different SoCs, and are
|
|
defined as macros in <soc>-pinfunc.h directly.
|
|
|
|
bias-disable: true
|
|
|
|
bias-pull-up: true
|
|
|
|
bias-pull-down: true
|
|
|
|
input-enable: true
|
|
|
|
input-disable: true
|
|
|
|
output-low: true
|
|
|
|
output-high: true
|
|
|
|
input-schmitt-enable: true
|
|
|
|
input-schmitt-disable: true
|
|
|
|
drive-strength:
|
|
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
|
|
|
mediatek,drive-strength-adv:
|
|
description: |
|
|
Describe the specific driving setup property.
|
|
For I2C pins, the existing generic driving setup can only support
|
|
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
|
|
can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
|
|
driving setup, the existing generic setup will be disabled.
|
|
The specific driving setup is controlled by E1E0EN.
|
|
When E1=0/E0=0, the strength is 0.125mA.
|
|
When E1=0/E0=1, the strength is 0.25mA.
|
|
When E1=1/E0=0, the strength is 0.5mA.
|
|
When E1=1/E0=1, the strength is 1mA.
|
|
EN is used to enable or disable the specific driving setup.
|
|
Valid arguments are described as below:
|
|
0: (E1, E0, EN) = (0, 0, 0)
|
|
1: (E1, E0, EN) = (0, 0, 1)
|
|
2: (E1, E0, EN) = (0, 1, 0)
|
|
3: (E1, E0, EN) = (0, 1, 1)
|
|
4: (E1, E0, EN) = (1, 0, 0)
|
|
5: (E1, E0, EN) = (1, 0, 1)
|
|
6: (E1, E0, EN) = (1, 1, 0)
|
|
7: (E1, E0, EN) = (1, 1, 1)
|
|
So the valid arguments are from 0 to 7.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
|
|
|
mediatek,pull-up-adv:
|
|
description: |
|
|
Pull up setings for 2 pull resistors, R0 and R1. User can
|
|
configure those special pins. Valid arguments are described as below:
|
|
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
|
|
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
|
|
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
|
|
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2, 3]
|
|
|
|
mediatek,pull-down-adv:
|
|
description: |
|
|
Pull down settings for 2 pull resistors, R0 and R1. User can
|
|
configure those special pins. Valid arguments are described as below:
|
|
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
|
|
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
|
|
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
|
|
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2, 3]
|
|
|
|
mediatek,tdsel:
|
|
description: |
|
|
An integer describing the steps for output level shifter duty
|
|
cycle when asserted (high pulse width adjustment). Valid arguments
|
|
are from 0 to 15.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
mediatek,rdsel:
|
|
description: |
|
|
An integer describing the steps for input level shifter duty cycle
|
|
when asserted (high pulse width adjustment). Valid arguments are
|
|
from 0 to 63.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
required:
|
|
- pinmux
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/mt8183-pinfunc.h>
|
|
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
pio: pinctrl@10005000 {
|
|
compatible = "mediatek,mt8183-pinctrl";
|
|
reg = <0 0x10005000 0 0x1000>,
|
|
<0 0x11f20000 0 0x1000>,
|
|
<0 0x11e80000 0 0x1000>,
|
|
<0 0x11e70000 0 0x1000>,
|
|
<0 0x11e90000 0 0x1000>,
|
|
<0 0x11d30000 0 0x1000>,
|
|
<0 0x11d20000 0 0x1000>,
|
|
<0 0x11c50000 0 0x1000>,
|
|
<0 0x11f30000 0 0x1000>,
|
|
<0 0x1000b000 0 0x1000>;
|
|
reg-names = "iocfg0", "iocfg1", "iocfg2",
|
|
"iocfg3", "iocfg4", "iocfg5",
|
|
"iocfg6", "iocfg7", "iocfg8",
|
|
"eint";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pio 0 0 192>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <2>;
|
|
|
|
i2c0_pins_a: i2c0-pins {
|
|
pins1 {
|
|
pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
|
|
<PINMUX_GPIO49__FUNC_SDA5>;
|
|
mediatek,pull-up-adv = <3>;
|
|
mediatek,drive-strength-adv = <7>;
|
|
};
|
|
};
|
|
|
|
i2c1_pins_a: i2c1-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
|
|
<PINMUX_GPIO51__FUNC_SDA3>;
|
|
mediatek,pull-down-adv = <2>;
|
|
mediatek,drive-strength-adv = <4>;
|
|
};
|
|
};
|
|
};
|
|
};
|