165 lines
5.2 KiB
YAML
165 lines
5.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm MSM8994 TLMM pin controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,msm8992-pinctrl
|
|
- qcom,msm8994-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 73
|
|
|
|
gpio-line-names:
|
|
maxItems: 146
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-msm8994-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-msm8994-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-msm8994-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
|
|
sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3,
|
|
blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
|
|
blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1,
|
|
blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2,
|
|
blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
|
|
blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8,
|
|
blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2,
|
|
blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
|
|
blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
|
|
blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
|
|
blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
|
|
blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
|
|
blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b,
|
|
blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1,
|
|
cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1,
|
|
cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
|
|
cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a,
|
|
gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
|
|
gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
|
|
gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd,
|
|
hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync,
|
|
qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c,
|
|
qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b,
|
|
qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a,
|
|
qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
|
|
qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1,
|
|
pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
|
|
tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
|
|
|
|
bias-pull-down: true
|
|
bias-pull-up: true
|
|
bias-disable: true
|
|
drive-strength: true
|
|
input-enable: true
|
|
output-high: true
|
|
output-low: true
|
|
|
|
required:
|
|
- pins
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
tlmm: pinctrl@fd510000 {
|
|
compatible = "qcom,msm8994-pinctrl";
|
|
reg = <0xfd510000 0x4000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
gpio-ranges = <&tlmm 0 0 146>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
blsp1-uart2-default-state {
|
|
function = "blsp_uart2";
|
|
pins = "gpio4", "gpio5";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
blsp1-spi1-default-state {
|
|
default-pins {
|
|
pins = "gpio0", "gpio1", "gpio3";
|
|
function = "blsp_spi1";
|
|
drive-strength = <10>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
cs-pins {
|
|
pins = "gpio8";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|