137 lines
4.4 KiB
YAML
137 lines
4.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. SDX55 TLMM block
|
|
|
|
maintainers:
|
|
- Vinod Koul <vkoul@kernel.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sdx55-pinctrl
|
|
|
|
reg:
|
|
description: Specifies the base address and size of the TLMM register space
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
|
|
gpio-reserved-ranges:
|
|
maxItems: 1
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-sdx55-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-sdx55-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-sdx55-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins. Functions are only valid for gpio pins.
|
|
enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
|
|
blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
|
|
blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
|
|
blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
|
|
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
|
|
ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
|
|
emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
|
|
gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
|
|
mgpi_clk, m_voc, native_char, native_char0, native_char1,
|
|
native_char2, native_char3, native_tsens, native_tsense,
|
|
nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
|
|
pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
|
|
qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
|
|
qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
|
|
qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
|
|
qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
|
|
qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
|
|
qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
|
|
qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
|
|
qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
|
|
qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
|
|
qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
|
|
qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
|
|
spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
|
|
uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
|
|
uim2_reset, usb2phy_ac, vsense_trigger ]
|
|
|
|
bias-pull-down: true
|
|
bias-pull-up: true
|
|
bias-disable: true
|
|
drive-strength: true
|
|
output-high: true
|
|
output-low: true
|
|
|
|
required:
|
|
- pins
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
tlmm: pinctrl@1f00000 {
|
|
compatible = "qcom,sdx55-pinctrl";
|
|
reg = <0x0f100000 0x300000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&tlmm 0 0 108>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
serial-state {
|
|
pins = "gpio8", "gpio9";
|
|
function = "blsp_uart3";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
...
|