42 lines
1.4 KiB
Plaintext
42 lines
1.4 KiB
Plaintext
* I2C
|
|
|
|
The I2C controller is expressed as a bus under the CPM node.
|
|
|
|
Properties:
|
|
- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c"
|
|
- reg : On CPM2 devices, the second resource doesn't specify the I2C
|
|
Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM
|
|
(typically 0x8afc 0x2).
|
|
- #address-cells : Should be one. The cell is the i2c device address with
|
|
the r/w bit set to zero.
|
|
- #size-cells : Should be zero.
|
|
- clock-frequency : Can be used to set the i2c clock frequency. If
|
|
unspecified, a default frequency of 60kHz is being used.
|
|
The following two properties are deprecated. They are only used by legacy
|
|
i2c drivers to find the bus to probe:
|
|
- linux,i2c-index : Can be used to hard code an i2c bus number. By default,
|
|
the bus number is dynamically assigned by the i2c core.
|
|
- linux,i2c-class : Can be used to override the i2c class. The class is used
|
|
by legacy i2c device drivers to find a bus in a specific context like
|
|
system management, video or sound. By default, I2C_CLASS_HWMON (1) is
|
|
being used. The definition of the classes can be found in
|
|
include/i2c/i2c.h
|
|
|
|
Example, based on mpc823:
|
|
|
|
i2c@860 {
|
|
compatible = "fsl,mpc823-i2c",
|
|
"fsl,cpm1-i2c";
|
|
reg = <0x860 0x20 0x3c80 0x30>;
|
|
interrupts = <16>;
|
|
interrupt-parent = <&CPM_PIC>;
|
|
fsl,cpm-command = <0x10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1307";
|
|
reg = <0x68>;
|
|
};
|
|
};
|