143 lines
3.2 KiB
YAML
143 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
|
|
|
|
maintainers:
|
|
- Balsam CHIHI <bchihi@baylibre.com>
|
|
|
|
description: |
|
|
LVTS is a thermal management architecture composed of three subsystems,
|
|
a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
|
|
a Converter - Low Voltage Thermal Sensor converter (LVTS), and
|
|
a Digital controller (LVTS_CTRL).
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- mediatek,mt8192-lvts-ap
|
|
- mediatek,mt8192-lvts-mcu
|
|
- mediatek,mt8195-lvts-ap
|
|
- mediatek,mt8195-lvts-mcu
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
description: LVTS reset for clearing temporary data on AP/MCU.
|
|
|
|
nvmem-cells:
|
|
minItems: 1
|
|
items:
|
|
- description: Calibration eFuse data 1 for LVTS
|
|
- description: Calibration eFuse data 2 for LVTS
|
|
|
|
nvmem-cell-names:
|
|
minItems: 1
|
|
items:
|
|
- const: lvts-calib-data-1
|
|
- const: lvts-calib-data-2
|
|
|
|
"#thermal-sensor-cells":
|
|
const: 1
|
|
|
|
allOf:
|
|
- $ref: thermal-sensor.yaml#
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- mediatek,mt8192-lvts-ap
|
|
- mediatek,mt8192-lvts-mcu
|
|
then:
|
|
properties:
|
|
nvmem-cells:
|
|
maxItems: 1
|
|
|
|
nvmem-cell-names:
|
|
maxItems: 1
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- mediatek,mt8195-lvts-ap
|
|
- mediatek,mt8195-lvts-mcu
|
|
then:
|
|
properties:
|
|
nvmem-cells:
|
|
minItems: 2
|
|
|
|
nvmem-cell-names:
|
|
minItems: 2
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- resets
|
|
- nvmem-cells
|
|
- nvmem-cell-names
|
|
- "#thermal-sensor-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/mt8195-clk.h>
|
|
#include <dt-bindings/reset/mt8195-resets.h>
|
|
#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
|
|
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
lvts_mcu: thermal-sensor@11278000 {
|
|
compatible = "mediatek,mt8195-lvts-mcu";
|
|
reg = <0 0x11278000 0 0x1000>;
|
|
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
|
|
resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
|
|
nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
|
|
nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
cpu0-thermal {
|
|
polling-delay = <1000>;
|
|
polling-delay-passive = <250>;
|
|
thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
|
|
|
|
trips {
|
|
cpu0_alert: trip-alert {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu0_crit: trip-crit {
|
|
temperature = <100000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|