652 lines
14 KiB
Plaintext
652 lines
14 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
aliases: aliases {
|
|
ethernet1 = ð1;
|
|
ethernet2 = ð2;
|
|
mmc0 = &usdhc3;
|
|
mmc1 = &usdhc4;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
|
|
brightness-levels = <0 32 64 128 255>;
|
|
default-brightness-level = <32>;
|
|
num-interpolated-steps = <8>;
|
|
power-supply = <&sw2_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lcd_display: display {
|
|
compatible = "fsl,imx-parallel-display";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interface-pix-fmt = "rgb24";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu1>;
|
|
status = "disabled";
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
lcd_display_in: endpoint {
|
|
remote-endpoint = <&ipu1_di0_disp0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
lcd_display_out: endpoint {
|
|
remote-endpoint = <&lcd_panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel: panel {
|
|
compatible = "dataimage,scf0700c48ggu18";
|
|
power-supply = <&sw2_reg>;
|
|
backlight = <&backlight>;
|
|
status = "disabled";
|
|
|
|
port {
|
|
lcd_panel_in: endpoint {
|
|
remote-endpoint = <&lcd_display_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_pcie: regulator-pcie {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie_reg>;
|
|
regulator-name = "MPCIE_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
status = "disabled";
|
|
};
|
|
|
|
reg_usb_h1_vbus: regulator-usb-h1-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh1_vbus>;
|
|
regulator-name = "usb_h1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
status = "disabled";
|
|
};
|
|
|
|
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg_vbus>;
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rgmii-id";
|
|
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
|
phy-reset-duration = <20>;
|
|
phy-supply = <&sw2_reg>;
|
|
status = "okay";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy_port2: phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy_port3: phy@2 {
|
|
reg = <2>;
|
|
};
|
|
|
|
switch@10 {
|
|
compatible = "qca,qca8334";
|
|
reg = <10>;
|
|
|
|
switch_ports: ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: port@0 {
|
|
reg = <0>;
|
|
label = "cpu";
|
|
phy-mode = "rgmii-id";
|
|
ethernet = <&fec>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
eth2: port@2 {
|
|
reg = <2>;
|
|
label = "eth2";
|
|
phy-handle = <&phy_port2>;
|
|
};
|
|
|
|
eth1: port@3 {
|
|
reg = <3>;
|
|
label = "eth1";
|
|
phy-handle = <&phy_port3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hdmi_cec>;
|
|
ddc-i2c-bus = <&i2c2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
pmic@8 {
|
|
compatible = "fsl,pfuze200";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
reg = <0x8>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vsnvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds: led-controller@30 {
|
|
compatible = "ti,lp5562";
|
|
reg = <0x30>;
|
|
clock-mode = /bits/ 8 <1>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
chan-name = "R";
|
|
led-cur = /bits/ 8 <0x20>;
|
|
max-cur = /bits/ 8 <0x60>;
|
|
reg = <0>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
|
|
led@1 {
|
|
chan-name = "G";
|
|
led-cur = /bits/ 8 <0x20>;
|
|
max-cur = /bits/ 8 <0x60>;
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@2 {
|
|
chan-name = "B";
|
|
led-cur = /bits/ 8 <0x20>;
|
|
max-cur = /bits/ 8 <0x60>;
|
|
reg = <2>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
};
|
|
|
|
eeprom@57 {
|
|
compatible = "atmel,24c128";
|
|
reg = <0x57>;
|
|
pagesize = <64>;
|
|
status = "okay";
|
|
};
|
|
|
|
touchscreen: touchscreen@5c {
|
|
compatible = "pixcir,pixcir_tangoc";
|
|
reg = <0x5c>;
|
|
pinctrl-0 = <&pinctrl_touch>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
|
attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
|
|
reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
touchscreen-size-x = <800>;
|
|
touchscreen-size-y = <480>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
oled_1309: oled@3c {
|
|
compatible = "solomon,ssd1309fb-i2c";
|
|
reg = <0x3c>;
|
|
solomon,height = <64>;
|
|
solomon,width = <128>;
|
|
solomon,page-offset = <0>;
|
|
solomon,segment-no-remap;
|
|
solomon,prechargep2 = <15>;
|
|
reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
|
|
vbat-supply = <&sw2_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
oled_1305: oled@3d {
|
|
compatible = "solomon,ssd1305fb-i2c";
|
|
reg = <0x3d>;
|
|
solomon,height = <64>;
|
|
solomon,width = <128>;
|
|
solomon,page-offset = <0>;
|
|
solomon,col-offset = <4>;
|
|
solomon,prechargep2 = <15>;
|
|
reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
|
|
vbat-supply = <&sw2_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio_oled: gpio@41 {
|
|
compatible = "nxp,pca9536";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0x41>;
|
|
vcc-supply = <&sw2_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
touchkeys: keys@5a {
|
|
compatible = "fsl,mpr121-touchkey";
|
|
reg = <0x5a>;
|
|
vdd-supply = <&sw2_reg>;
|
|
autorepeat;
|
|
linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
|
|
<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
|
|
<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
|
|
poll-interval = <50>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010
|
|
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_hdmi_cec: hdmicecgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
|
|
>;
|
|
};
|
|
|
|
pinctrl_ipu1: ipu1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
|
|
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
|
|
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
|
|
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
|
|
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
|
|
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
|
|
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
|
|
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
|
|
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
|
|
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
|
|
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
|
|
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
|
|
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
|
|
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
|
|
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
|
|
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
|
|
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
|
|
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
|
|
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
|
|
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
|
|
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
|
|
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
|
|
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
|
|
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
|
|
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
|
|
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
|
|
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie: pciegrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098
|
|
MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098
|
|
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie_reg: pciereggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8
|
|
>;
|
|
};
|
|
|
|
pinctrl_touch: touchgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098
|
|
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8
|
|
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098
|
|
MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1: usbh1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1_vbus: usbh1-vbus {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098
|
|
MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg_vbus: usbotg-vbus {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018
|
|
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4: usdhc4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069
|
|
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069
|
|
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069
|
|
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069
|
|
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0
|
|
>;
|
|
};
|
|
};
|
|
|
|
&ipu1_di0_disp0 {
|
|
remote-endpoint = <&lcd_display_in>;
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
|
|
vpcie-supply = <®_pcie>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh1>;
|
|
vbus-supply = <®_usb_h1_vbus>;
|
|
over-current-active-low;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbotg {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
over-current-active-low;
|
|
srp-disable;
|
|
hnp-disable;
|
|
adp-disable;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy1 {
|
|
fsl,tx-d-cal = <106>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy2 {
|
|
fsl,tx-d-cal = <109>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
|
|
no-1-8-v;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
vmmc-supply = <&sw2_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usdhc4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
no-1-8-v;
|
|
keep-power-in-suspend;
|
|
vmmc-supply = <&sw2_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wdog2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|