98 lines
2.6 KiB
Plaintext
98 lines
2.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2023 DH electronics GmbH
|
|
*/
|
|
|
|
/*
|
|
* Special SoM configuration: SD card
|
|
*
|
|
* Enabled: Micro SD card on module or
|
|
* external SD card via DHCOM depends on hardware variant
|
|
* GPIO H and GPIO I will be available
|
|
* DHCOM UART2 will be available
|
|
* Disabled: WiFi and BT
|
|
*/
|
|
|
|
/*
|
|
* To use usdhc1 as SD card, the WiFi node must be deleted.
|
|
* BT is also not available, so remove BT from the UART node.
|
|
*/
|
|
/delete-node/ &brcmf;
|
|
/delete-node/ &bluetooth;
|
|
|
|
/ {
|
|
aliases {
|
|
mmc1 = &usdhc1;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
serial5 = &uart6;
|
|
};
|
|
|
|
reg_sd1_vmmc: regulator-sd1-vmmc {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "VSD_3V3";
|
|
};
|
|
};
|
|
|
|
/* Micro SD card on module or external SD card via DHCOM */
|
|
&usdhc1 {
|
|
/delete-property/ #address-cells;
|
|
/delete-property/ #size-cells;
|
|
/delete-property/ keep-power-in-suspend;
|
|
/delete-property/ mmc-pwrseq;
|
|
/delete-property/ non-removable;
|
|
/delete-property/ wakeup-source;
|
|
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
vmmc-supply = <®_sd1_vmmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_usdhc1: usdhc1-grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
|
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x120b0 /* SD1 CD */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
|
|
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x120b0 /* SD1 CD */
|
|
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
|
|
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x120b0 /* SD1 CD */
|
|
>;
|
|
};
|
|
};
|