199 lines
4.8 KiB
Plaintext
199 lines
4.8 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Device Tree Source for OMAP34xx/OMAP35xx SoC
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
#include <dt-bindings/bus/ti-sysc.h>
|
|
#include <dt-bindings/media/omap3-isp.h>
|
|
|
|
#include "omap3.dtsi"
|
|
|
|
/ {
|
|
cpus {
|
|
cpu: cpu@0 {
|
|
/* OMAP343x/OMAP35xx variants OPP1-6 */
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
|
|
clock-latency = <300000>; /* From legacy driver */
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
|
|
cpu0_opp_table: opp-table {
|
|
compatible = "operating-points-v2-ti-cpu";
|
|
syscon = <&scm_conf>;
|
|
|
|
opp1-125000000 {
|
|
opp-hz = /bits/ 64 <125000000>;
|
|
/*
|
|
* we currently only select the max voltage from table
|
|
* Table 3-3 of the omap3530 Data sheet (SPRS507F).
|
|
* Format is: <target min max>
|
|
*/
|
|
opp-microvolt = <975000 975000 975000>;
|
|
/*
|
|
* first value is silicon revision bit mask
|
|
* second one 720MHz Device Identification bit mask
|
|
*/
|
|
opp-supported-hw = <0xffffffff 3>;
|
|
};
|
|
|
|
opp2-250000000 {
|
|
opp-hz = /bits/ 64 <250000000>;
|
|
opp-microvolt = <1075000 1075000 1075000>;
|
|
opp-supported-hw = <0xffffffff 3>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp3-500000000 {
|
|
opp-hz = /bits/ 64 <500000000>;
|
|
opp-microvolt = <1200000 1200000 1200000>;
|
|
opp-supported-hw = <0xffffffff 3>;
|
|
};
|
|
|
|
opp4-550000000 {
|
|
opp-hz = /bits/ 64 <550000000>;
|
|
opp-microvolt = <1275000 1275000 1275000>;
|
|
opp-supported-hw = <0xffffffff 3>;
|
|
};
|
|
|
|
opp5-600000000 {
|
|
opp-hz = /bits/ 64 <600000000>;
|
|
opp-microvolt = <1350000 1350000 1350000>;
|
|
opp-supported-hw = <0xffffffff 3>;
|
|
};
|
|
|
|
opp6-720000000 {
|
|
opp-hz = /bits/ 64 <720000000>;
|
|
opp-microvolt = <1350000 1350000 1350000>;
|
|
/* only high-speed grade omap3530 devices */
|
|
opp-supported-hw = <0xffffffff 2>;
|
|
turbo-mode;
|
|
};
|
|
};
|
|
|
|
ocp@68000000 {
|
|
omap3_pmx_core2: pinmux@480025d8 {
|
|
compatible = "ti,omap3-padconf", "pinctrl-single";
|
|
reg = <0x480025d8 0x24>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
|
|
isp: isp@480bc000 {
|
|
compatible = "ti,omap3-isp";
|
|
reg = <0x480bc000 0x12fc
|
|
0x480bd800 0x017c>;
|
|
interrupts = <24>;
|
|
iommus = <&mmu_isp>;
|
|
syscon = <&scm_conf 0x6c>;
|
|
ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
|
|
#clock-cells = <1>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
bandgap: bandgap@48002524 {
|
|
reg = <0x48002524 0x4>;
|
|
compatible = "ti,omap34xx-bandgap";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
target-module@480cb000 {
|
|
compatible = "ti,sysc-omap3430-sr", "ti,sysc";
|
|
ti,hwmods = "smartreflex_core";
|
|
reg = <0x480cb024 0x4>;
|
|
reg-names = "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
|
|
clocks = <&sr2_fck>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x480cb000 0x001000>;
|
|
|
|
smartreflex_core: smartreflex@0 {
|
|
compatible = "ti,omap3-smartreflex-core";
|
|
reg = <0 0x400>;
|
|
interrupts = <19>;
|
|
};
|
|
};
|
|
|
|
target-module@480c9000 {
|
|
compatible = "ti,sysc-omap3430-sr", "ti,sysc";
|
|
ti,hwmods = "smartreflex_mpu_iva";
|
|
reg = <0x480c9024 0x4>;
|
|
reg-names = "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
|
|
clocks = <&sr1_fck>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x480c9000 0x001000>;
|
|
|
|
smartreflex_mpu_iva: smartreflex@480c9000 {
|
|
compatible = "ti,omap3-smartreflex-mpu-iva";
|
|
reg = <0 0x400>;
|
|
interrupts = <18>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* On omap34xx the OCP registers do not seem to be accessible
|
|
* at all unlike on 36xx. Maybe SGX is permanently set to
|
|
* "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
|
|
* write-only at 0x50000e10. We detect SGX based on the SGX
|
|
* revision register instead of the unreadable OCP revision
|
|
* register. Also note that on early 34xx es1 revision there
|
|
* are also different clocks, but we do not have any dts users
|
|
* for it.
|
|
*/
|
|
sgx_module: target-module@50000000 {
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x50000014 0x4>;
|
|
reg-names = "rev";
|
|
clocks = <&sgx_fck>, <&sgx_ick>;
|
|
clock-names = "fck", "ick";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x50000000 0x4000>;
|
|
|
|
/*
|
|
* Closed source PowerVR driver, no child device
|
|
* binding or driver in mainline
|
|
*/
|
|
};
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
#include "omap3-cpu-thermal.dtsi"
|
|
};
|
|
};
|
|
|
|
&ssi {
|
|
status = "okay";
|
|
|
|
clocks = <&ssi_ssr_fck>,
|
|
<&ssi_sst_fck>,
|
|
<&ssi_ick>;
|
|
clock-names = "ssi_ssr_fck",
|
|
"ssi_sst_fck",
|
|
"ssi_ick";
|
|
};
|
|
|
|
&usb_otg_target {
|
|
clocks = <&hsotgusb_ick_3430es2>;
|
|
};
|
|
|
|
/include/ "omap34xx-omap36xx-clocks.dtsi"
|
|
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
|
|
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
|