535 lines
9.8 KiB
Plaintext
535 lines
9.8 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
#include "msm8916-pm8916.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
reserved-memory {
|
|
/* Additional memory used by Samsung firmware modifications */
|
|
tz-apps@85500000 {
|
|
reg = <0x0 0x85500000 0x0 0xb00000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
clk_pwm: pwm {
|
|
compatible = "clk-pwm";
|
|
#pwm-cells = <2>;
|
|
|
|
clocks = <&gcc GCC_GP2_CLK>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&motor_pwm_default>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_default>;
|
|
|
|
label = "GPIO Buttons";
|
|
|
|
button-volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
button-home {
|
|
label = "Home";
|
|
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_HOMEPAGE>;
|
|
};
|
|
};
|
|
|
|
gpio-hall-sensor {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_hall_sensor_default>;
|
|
|
|
label = "GPIO Hall Effect Sensor";
|
|
|
|
event-hall-sensor {
|
|
label = "Hall Effect Sensor";
|
|
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* NOTE: A5 connects GPIO 76 to a reglator powering the motor
|
|
* driver IC but A3 connects the same signal to an ENABLE pin of
|
|
* the driver.
|
|
*/
|
|
reg_motor_vdd: regulator-motor-vdd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "motor_vdd";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&motor_en_default>;
|
|
};
|
|
|
|
reg_vdd_tsp_a: regulator-vdd-tsp-a {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_tsp_a";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tsp_en_default>;
|
|
};
|
|
|
|
i2c-muic {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&muic_i2c_default>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
muic: extcon@25 {
|
|
compatible = "siliconmitus,sm5502-muic";
|
|
|
|
reg = <0x25>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&muic_int_default>;
|
|
};
|
|
};
|
|
|
|
i2c-tkey {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tkey_i2c_default>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
touchkey: touchkey@20 {
|
|
/* Note: Actually an ABOV MCU that implements same interface */
|
|
compatible = "coreriver,tc360-touchkey";
|
|
reg = <0x20>;
|
|
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
/* vcc/vdd-supply are board-specific */
|
|
vddio-supply = <&pm8916_l6>;
|
|
|
|
linux,keycodes = <KEY_APPSELECT KEY_BACK>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tkey_default>;
|
|
};
|
|
};
|
|
|
|
i2c-nfc {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nfc_i2c_default>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
nfc@27 {
|
|
compatible = "samsung,s3fwrn5-i2c";
|
|
reg = <0x27>;
|
|
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>;
|
|
wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nfc_default &nfc_clk_req>;
|
|
};
|
|
};
|
|
|
|
vibrator: vibrator {
|
|
compatible = "pwm-vibrator";
|
|
|
|
pwms = <&clk_pwm 0 100000>;
|
|
pwm-names = "enable";
|
|
|
|
vcc-supply = <®_motor_vdd>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&blsp_i2c2 {
|
|
status = "okay";
|
|
|
|
accelerometer: accelerometer@10 {
|
|
compatible = "bosch,bmc150_accel";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
vdd-supply = <&pm8916_l17>;
|
|
vddio-supply = <&pm8916_l5>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&accel_int_default>;
|
|
};
|
|
|
|
magnetometer@12 {
|
|
compatible = "bosch,bmc150_magn";
|
|
reg = <0x12>;
|
|
|
|
vdd-supply = <&pm8916_l17>;
|
|
vddio-supply = <&pm8916_l5>;
|
|
};
|
|
};
|
|
|
|
&blsp_i2c4 {
|
|
status = "okay";
|
|
|
|
battery@35 {
|
|
compatible = "richtek,rt5033-battery";
|
|
reg = <0x35>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fg_alert_default>;
|
|
};
|
|
};
|
|
|
|
&blsp1_uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0 {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&mdss_default>;
|
|
pinctrl-1 = <&mdss_sleep>;
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_resin {
|
|
status = "okay";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
|
|
&pronto {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
|
|
|
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
extcon = <&muic>, <&muic>;
|
|
};
|
|
|
|
&usb_hs_phy {
|
|
extcon = <&muic>;
|
|
};
|
|
|
|
&smd_rpm_regulators {
|
|
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
|
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
|
vdd_l7-supply = <&pm8916_s4>;
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
};
|
|
|
|
l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l4 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l10 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
l13 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
};
|
|
|
|
&msmgpio {
|
|
accel_int_default: accel-int-default-state {
|
|
pins = "gpio115";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
fg_alert_default: fg-alert-default-state {
|
|
pins = "gpio121";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
gpio_keys_default: gpio-keys-default-state {
|
|
pins = "gpio107", "gpio109";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
|
|
pins = "gpio52";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
mdss_default: mdss-default-state {
|
|
pins = "gpio25";
|
|
function = "gpio";
|
|
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
mdss_sleep: mdss-sleep-state {
|
|
pins = "gpio25";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
motor_en_default: motor-en-default-state {
|
|
pins = "gpio76";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
motor_pwm_default: motor-pwm-default-state {
|
|
pins = "gpio50";
|
|
function = "gcc_gp2_clk_a";
|
|
};
|
|
|
|
muic_i2c_default: muic-i2c-default-state {
|
|
pins = "gpio105", "gpio106";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
muic_int_default: muic-int-default-state {
|
|
pins = "gpio12";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
nfc_default: nfc-default-state {
|
|
nfc-pins {
|
|
pins = "gpio20", "gpio49";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
irq-pins {
|
|
pins = "gpio21";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
nfc_i2c_default: nfc-i2c-default-state {
|
|
pins = "gpio0", "gpio1";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
tkey_default: tkey-default-state {
|
|
pins = "gpio98";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
tkey_i2c_default: tkey-i2c-default-state {
|
|
pins = "gpio16", "gpio17";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
tsp_en_default: tsp-en-default-state {
|
|
pins = "gpio73";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
ts_int_default: ts-int-default-state {
|
|
pins = "gpio13";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&pm8916_gpios {
|
|
nfc_clk_req: nfc-clk-req-state {
|
|
pins = "gpio2";
|
|
function = "func1";
|
|
|
|
input-enable;
|
|
bias-disable;
|
|
power-source = <PM8916_GPIO_L2>;
|
|
};
|
|
};
|