787 lines
14 KiB
Plaintext
787 lines
14 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
|
|
*/
|
|
|
|
#include "msm8996.dtsi"
|
|
#include "pm8994.dtsi"
|
|
#include "pmi8994.dtsi"
|
|
#include "pmi8996.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/sound/qcom,q6afe.h>
|
|
#include <dt-bindings/sound/qcom,q6asm.h>
|
|
#include <dt-bindings/sound/qcom,wcd9335.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
serial1 = &blsp2_uart2;
|
|
};
|
|
|
|
battery: battery {
|
|
compatible = "simple-battery";
|
|
|
|
constant-charge-current-max-microamp = <3000000>;
|
|
voltage-min-design-microvolt = <3400000>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial1:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
div1_mclk: div1-clk {
|
|
compatible = "gpio-gate-clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&audio_mclk>;
|
|
#clock-cells = <0>;
|
|
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
|
|
enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
divclk4: div4-clk {
|
|
compatible = "fixed-clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&divclk4_pin_a>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "divclk4";
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
ramoops@ac000000 {
|
|
compatible = "ramoops";
|
|
reg = <0 0xac000000 0 0x200000>;
|
|
record-size = <0x20000>;
|
|
console-size = <0x100000>;
|
|
pmsg-size = <0x80000>;
|
|
};
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
wlan_en: wlan-en-regulator {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_en_gpios>;
|
|
regulator-name = "wlan-en-regulator";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
|
|
|
|
/* WLAN card specific delay */
|
|
startup-delay-us = <70000>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
&adsp_pil {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_i2c3 {
|
|
status = "okay";
|
|
|
|
tfa9890_amp: audio-codec@36 {
|
|
compatible = "nxp,tfa9890";
|
|
reg = <0x36>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c6 {
|
|
status = "okay";
|
|
|
|
bq27541: fuel-gauge@55 {
|
|
compatible = "ti,bq27541";
|
|
reg = <0x55>;
|
|
};
|
|
};
|
|
|
|
&blsp1_uart2 {
|
|
label = "BT-UART";
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,qca6174-bt";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_en_gpios>;
|
|
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
|
|
clocks = <&divclk4>;
|
|
};
|
|
};
|
|
|
|
&blsp2_i2c1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp2_i2c6 {
|
|
status = "okay";
|
|
|
|
synaptics_rmi4_i2c: touchscreen@20 {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&touch_default>;
|
|
pinctrl-1 = <&touch_suspend>;
|
|
vdd-supply = <&vreg_l22a_3p0>;
|
|
vio-supply = <&vreg_s4a_1p8>;
|
|
syna,reset-delay-ms = <200>;
|
|
syna,startup-delay-ms = <200>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x1>;
|
|
syna,nosleep-mode = <1>;
|
|
};
|
|
|
|
rmi4-f12@12 {
|
|
reg = <0x12>;
|
|
syna,sensor-type = <1>;
|
|
touchscreen-x-mm = <68>;
|
|
touchscreen-y-mm = <122>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp2_uart2 {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&blsp2_uart2_2pins_default>;
|
|
pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
|
|
status = "okay";
|
|
};
|
|
|
|
&camss {
|
|
vdda-supply = <&vreg_l2a_1p25>;
|
|
};
|
|
|
|
&dsi0 {
|
|
vdda-supply = <&vreg_l2a_1p25>;
|
|
vcca-supply = <&vreg_l22a_3p0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0_out {
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
|
|
&dsi0_phy {
|
|
vcca-supply = <&vreg_l28a_0p925>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&hsusb_phy1 {
|
|
vdd-supply = <&vreg_l28a_0p925>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hsusb_phy2 {
|
|
vdd-supply = <&vreg_l28a_0p925>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdp {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmcc {
|
|
vdd-gfx-supply = <&vdd_gfx>;
|
|
};
|
|
|
|
&mss_pil {
|
|
pll-supply = <&vreg_l12a_1p8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
|
|
vddpe-3v3-supply = <&wlan_en>;
|
|
vdda-supply = <&vreg_l28a_0p925>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_phy {
|
|
vdda-phy-supply = <&vreg_l28a_0p925>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8994_gpios {
|
|
bt_en_gpios: bt-en-gpios-state {
|
|
pins = "gpio19";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
output-low;
|
|
power-source = <PM8994_GPIO_S4>;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
wlan_en_gpios: wlan-en-gpios-state {
|
|
pins = "gpio8";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
output-low;
|
|
power-source = <PM8994_GPIO_S4>;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
audio_mclk: divclk1-state {
|
|
pins = "gpio15";
|
|
function = PMIC_GPIO_FUNC_FUNC1;
|
|
power-source = <PM8994_GPIO_S4>;
|
|
};
|
|
|
|
divclk4_pin_a: divclk4-state {
|
|
pins = "gpio18";
|
|
function = PMIC_GPIO_FUNC_FUNC2;
|
|
bias-disable;
|
|
power-source = <PM8994_GPIO_S4>;
|
|
};
|
|
};
|
|
|
|
&pm8994_spmi_regulators {
|
|
qcom,saw-reg = <&saw3>;
|
|
|
|
s9 {
|
|
qcom,saw-slave;
|
|
};
|
|
|
|
s10 {
|
|
qcom,saw-slave;
|
|
};
|
|
|
|
s11 {
|
|
qcom,saw-leader;
|
|
regulator-min-microvolt = <1140000>;
|
|
regulator-max-microvolt = <1140000>;
|
|
regulator-max-step-microvolt = <150000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&pmi8994_spmi_regulators {
|
|
vdd_gfx: s2 {
|
|
regulator-name = "vdd-gfx";
|
|
regulator-min-microvolt = <980000>;
|
|
regulator-max-microvolt = <1230000>;
|
|
};
|
|
};
|
|
|
|
&q6asmdai {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dai@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
dai@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
dai@2 {
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
&rpm_requests {
|
|
regulators {
|
|
compatible = "qcom,rpm-pm8994-regulators";
|
|
|
|
vreg_s3a_1p3: s3 {
|
|
regulator-name = "vreg_s3a_1p3";
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
vreg_s4a_1p8: s4 {
|
|
regulator-name = "vreg_s4a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_s5a_2p15: s5 {
|
|
regulator-name = "vreg_s5a_2p15";
|
|
regulator-min-microvolt = <2150000>;
|
|
regulator-max-microvolt = <2150000>;
|
|
};
|
|
|
|
vreg_s7a_0p8: s7 {
|
|
regulator-name = "vreg_s7a_0p8";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <800000>;
|
|
};
|
|
|
|
vreg_l1a_1p0: l1 {
|
|
regulator-name = "vreg_l1a_1p0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
vreg_l2a_1p25: l2 {
|
|
regulator-name = "vreg_l2a_1p25";
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l3a_1p1: l3 {
|
|
regulator-name = "vreg_l3a_1p1";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
vreg_l4a_1p225: l4 {
|
|
regulator-name = "vreg_l4a_1p225";
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
vreg_l6a_1p2: l6 {
|
|
regulator-name = "vreg_l6a_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vreg_l7a_1p8: l7 {
|
|
regulator-name = "vreg_l7a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l9a_1p8: l9 {
|
|
regulator-name = "vreg_l9a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l10a_1p8: l10 {
|
|
regulator-name = "vreg_l10a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l11a_1p15: l11 {
|
|
regulator-name = "vreg_l11a_1p15";
|
|
regulator-min-microvolt = <1150000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
};
|
|
|
|
vreg_l12a_1p8: l12 {
|
|
regulator-name = "vreg_l12a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l13a_2p95: l13 {
|
|
regulator-name = "vreg_l13a_2p95";
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
vreg_l16a_2p7: l16 {
|
|
regulator-name = "vreg_l16a_2p7";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
vreg_l17a_2p6: l17 {
|
|
regulator-name = "vreg_l17a_2p6";
|
|
regulator-min-microvolt = <2600000>;
|
|
regulator-max-microvolt = <2600000>;
|
|
};
|
|
|
|
vreg_l18a_3p3: l18 {
|
|
regulator-name = "vreg_l18a_3p3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vreg_l19a_3p0: l19 {
|
|
regulator-name = "vreg_l19a_3p0";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vreg_l20a_2p95: l20 {
|
|
regulator-name = "vreg_l20a_2p95";
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l21a_2p95: l21 {
|
|
regulator-name = "vreg_l21a_2p95";
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
vreg_l22a_3p0: l22 {
|
|
regulator-name = "vreg_l22a_3p0";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vreg_l23a_2p8: l23 {
|
|
regulator-name = "vreg_l23a_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
vreg_l24a_3p075: l24 {
|
|
regulator-name = "vreg_l24a_3p075";
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
};
|
|
|
|
vreg_l25a_1p2: l25 {
|
|
regulator-name = "vreg_l25a_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-allow-set-load;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_l27a_1p2: l27 {
|
|
regulator-name = "vreg_l27a_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vreg_l28a_0p925: l28 {
|
|
regulator-name = "vreg_l28a_0p925";
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <925000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l29a_2p8: l29 {
|
|
regulator-name = "vreg_l29a_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
vreg_l30a_1p8: l30 {
|
|
regulator-name = "vreg_l30a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vreg_l32a_1p8: l32 {
|
|
regulator-name = "vreg_l32a_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&slpi_pil {
|
|
status = "okay";
|
|
};
|
|
|
|
&sound {
|
|
compatible = "qcom,apq8096-sndcard";
|
|
model = "OnePlus3";
|
|
audio-routing = "RX_BIAS", "MCLK",
|
|
"AMIC2", "MIC BIAS2",
|
|
"MIC BIAS2", "Headset Mic",
|
|
"AMIC4", "MIC BIAS1",
|
|
"MIC BIAS1", "Primary Mic",
|
|
"AMIC5", "MIC BIAS3",
|
|
"MIC BIAS3", "Noise Mic";
|
|
|
|
mm1-dai-link {
|
|
link-name = "MultiMedia1";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
|
|
};
|
|
};
|
|
|
|
mm2-dai-link {
|
|
link-name = "MultiMedia2";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
|
|
};
|
|
};
|
|
|
|
mm3-dai-link {
|
|
link-name = "MultiMedia3";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
|
|
};
|
|
};
|
|
|
|
mm4-dai-link {
|
|
link-name = "MultiMedia4";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
|
|
};
|
|
};
|
|
|
|
mm5-dai-link {
|
|
link-name = "MultiMedia5";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
|
|
};
|
|
};
|
|
|
|
mm6-dai-link {
|
|
link-name = "MultiMedia6";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
|
|
};
|
|
};
|
|
|
|
mm7-dai-link {
|
|
link-name = "MultiMedia7";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>;
|
|
};
|
|
};
|
|
|
|
mm8-dai-link {
|
|
link-name = "MultiMedia8";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>;
|
|
};
|
|
};
|
|
|
|
mm9-dai-link {
|
|
link-name = "MultiMedia9";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>;
|
|
};
|
|
};
|
|
|
|
mm10-dai-link {
|
|
link-name = "MultiMedia10";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>;
|
|
};
|
|
};
|
|
|
|
mm11-dai-link {
|
|
link-name = "MultiMedia11";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>;
|
|
};
|
|
};
|
|
|
|
mm12-dai-link {
|
|
link-name = "MultiMedia12";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>;
|
|
};
|
|
};
|
|
|
|
mm13-dai-link {
|
|
link-name = "MultiMedia13";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>;
|
|
};
|
|
};
|
|
|
|
mm14-dai-link {
|
|
link-name = "MultiMedia14";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>;
|
|
};
|
|
};
|
|
|
|
mm15-dai-link {
|
|
link-name = "MultiMedia15";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>;
|
|
};
|
|
};
|
|
|
|
mm16-dai-link {
|
|
link-name = "MultiMedia16";
|
|
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>;
|
|
};
|
|
};
|
|
|
|
slim-dai-link {
|
|
link-name = "SLIM Playback";
|
|
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_6_RX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9335 AIF4_PB>;
|
|
};
|
|
};
|
|
|
|
slimcap-dai-link {
|
|
link-name = "SLIM Capture";
|
|
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_0_TX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9335 AIF1_CAP>;
|
|
};
|
|
};
|
|
|
|
speaker-dai-link {
|
|
link-name = "Speaker";
|
|
|
|
cpu {
|
|
sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&tfa9890_amp>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <81 4>;
|
|
|
|
mdss_dsi_active: mdss-dsi-active-state {
|
|
pins = "gpio8";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
mdss_dsi_suspend: mdss-dsi-suspend-state {
|
|
pins = "gpio8";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
mdss_te_active: mdss-te-active-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
mdss_te_suspend: mdss-te-suspend-state {
|
|
pins = "gpio10";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
touch_default: touch-default-state {
|
|
pins = "gpio89", "gpio125", "gpio49";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
touch_suspend: touch-suspend-state {
|
|
pins = "gpio89", "gpio125", "gpio49";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&ufsphy {
|
|
vdda-phy-supply = <&vreg_l28a_0p925>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
vddp-ref-clk-supply = <&vreg_l25a_1p2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&ufshc {
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
|
vccq-supply = <&vreg_l25a_1p2>;
|
|
vccq2-supply = <&vreg_s4a_1p8>;
|
|
|
|
vcc-max-microamp = <600000>;
|
|
vccq-max-microamp = <450000>;
|
|
vccq2-max-microamp = <450000>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_dwc3 {
|
|
phys = <&hsusb_phy1>;
|
|
phy-names = "usb2-phy";
|
|
|
|
maximum-speed = "high-speed";
|
|
};
|
|
|
|
&venus {
|
|
status = "okay";
|
|
};
|
|
|
|
&wcd9335 {
|
|
clock-names = "mclk", "slimbus";
|
|
clocks = <&div1_mclk>,
|
|
<&rpmcc RPM_SMD_BB_CLK1>;
|
|
|
|
vdd-buck-supply = <&vreg_s4a_1p8>;
|
|
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
|
|
vdd-tx-supply = <&vreg_s4a_1p8>;
|
|
vdd-rx-supply = <&vreg_s4a_1p8>;
|
|
vdd-io-supply = <&vreg_s4a_1p8>;
|
|
};
|