669 lines
15 KiB
Plaintext
669 lines
15 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
|
|
* Copyright (c) 2020, AngeloGioacchino Del Regno
|
|
* <angelogioacchino.delregno@somainline.org>
|
|
*/
|
|
|
|
#include "pm660.dtsi"
|
|
#include "pm660l.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/input/gpio-keys.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
/* required for bootloader to select correct board */
|
|
qcom,msm-id = <318 0>;
|
|
qcom,board-id = <8 1>;
|
|
qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
|
|
|
|
/* This part enables graphical output via bootloader-enabled display */
|
|
chosen {
|
|
bootargs = "earlycon=tty0 console=tty0";
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
stdout-path = "framebuffer0";
|
|
|
|
framebuffer0: framebuffer@9d400000 {
|
|
compatible = "simple-framebuffer";
|
|
reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
|
|
width = <1080>;
|
|
height = <1920>;
|
|
stride = <(1080 * 4)>;
|
|
format = "a8r8g8b8";
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
board_vbat: vbat-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBAT";
|
|
|
|
regulator-min-microvolt = <4000000>;
|
|
regulator-max-microvolt = <4000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
cam_vdig_imx300_219_vreg: cam-vdig-imx300-219-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam_vdig_imx300_219_vreg";
|
|
startup-delay-us = <0>;
|
|
enable-active-high;
|
|
gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam_vdig_default>;
|
|
};
|
|
|
|
cam_vana_front_vreg: cam-vana-front-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam_vana_front_vreg";
|
|
startup-delay-us = <0>;
|
|
enable-active-high;
|
|
gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&imx219_vana_default>;
|
|
};
|
|
|
|
cam_vana_rear_vreg: cam-vana-rear-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam_vana_rear_vreg";
|
|
startup-delay-us = <0>;
|
|
enable-active-high;
|
|
gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
|
|
regulator-always-on;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&imx300_vana_default>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
key-camera-focus {
|
|
label = "Camera Focus";
|
|
gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
key-camera-snapshot {
|
|
label = "Camera Snapshot";
|
|
gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
key-vol-down {
|
|
label = "Volume Down";
|
|
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
ramoops@ffc00000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0xffc00000 0x0 0x100000>;
|
|
record-size = <0x10000>;
|
|
console-size = <0x60000>;
|
|
ftrace-size = <0x10000>;
|
|
pmsg-size = <0x20000>;
|
|
ecc-size = <16>;
|
|
status = "okay";
|
|
};
|
|
|
|
debug@ffb00000 {
|
|
reg = <0x00 0xffb00000 0x00 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
reserved@85800000 {
|
|
reg = <0x00 0x85800000 0x00 0x3700000>;
|
|
no-map;
|
|
};
|
|
|
|
cont_splash_mem: splash@9d400000 {
|
|
reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Until we hook up type-c detection, we
|
|
* have to stick with this. But it works.
|
|
*/
|
|
extcon_usb: extcon-usb {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&adsp_pil {
|
|
firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
|
|
};
|
|
|
|
&blsp_i2c1 {
|
|
status = "okay";
|
|
|
|
touchscreen: synaptics-rmi4-i2c@70 {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x70>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts-extended = <&tlmm 45 0x2008>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ts_int_active &ts_lcd_id_active>;
|
|
|
|
syna,reset-delay-ms = <200>;
|
|
syna,startup-delay-ms = <220>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x01>;
|
|
syna,nosleep-mode = <1>;
|
|
};
|
|
|
|
rmi4-f11@11 {
|
|
reg = <0x11>;
|
|
syna,sensor-type = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_i2c2 {
|
|
status = "okay";
|
|
|
|
/* SMB1351 charger */
|
|
};
|
|
|
|
/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
|
|
|
|
&blsp_i2c6 {
|
|
status = "okay";
|
|
|
|
/* NXP NFC */
|
|
};
|
|
|
|
&blsp1_uart2 {
|
|
status = "okay";
|
|
|
|
/* MSM serial console */
|
|
};
|
|
|
|
&blsp2_uart1 {
|
|
status = "okay";
|
|
|
|
/* HCI Bluetooth */
|
|
};
|
|
|
|
&pm660l_lpg {
|
|
qcom,power-source = <1>;
|
|
|
|
status = "okay";
|
|
|
|
multi-led {
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_STATUS;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pon_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&pon_resin {
|
|
status = "okay";
|
|
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
&qusb2phy0 {
|
|
status = "okay";
|
|
|
|
vdd-supply = <&vreg_l1b_0p925>;
|
|
vdda-pll-supply = <&vreg_l10a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
|
|
};
|
|
|
|
&rpm_requests {
|
|
regulators-0 {
|
|
compatible = "qcom,rpm-pm660l-regulators";
|
|
|
|
vdd_s1-supply = <&vph_pwr>;
|
|
vdd_s2-supply = <&vph_pwr>;
|
|
vdd_s3_s4-supply = <&vph_pwr>;
|
|
vdd_s5-supply = <&vph_pwr>;
|
|
vdd_s6-supply = <&vph_pwr>;
|
|
|
|
vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
|
|
vdd_l2-supply = <&vreg_bob>;
|
|
vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
|
|
vdd_l4_l6-supply = <&vreg_bob>;
|
|
vdd_bob-supply = <&vph_pwr>;
|
|
|
|
vreg_s1b_1p125: s1 {
|
|
regulator-min-microvolt = <1125000>;
|
|
regulator-max-microvolt = <1125000>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_s2b_1p05: s2 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
/*
|
|
* At least on Nile's configuration, S3B/S4B (VDD_CX) and
|
|
* S5B (VDD_MX) are managed only through RPM Power Domains.
|
|
* Trying to set a voltage on the main supply will create
|
|
* havoc and freeze the SoC.
|
|
* In any case, reference voltages for these regulators are:
|
|
* S3B/S4B: 0.870V
|
|
* S5B: 0.915V
|
|
*/
|
|
|
|
/* LDOs */
|
|
vreg_l1b_0p925: l1 {
|
|
regulator-min-microvolt = <920000>;
|
|
regulator-max-microvolt = <928000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l2b_2p95: l2 {
|
|
/*
|
|
* This regulator supports 1.648 - 3.104V on this board
|
|
* but we set a max voltage of anything less than 2.7V
|
|
* to satisfy a condition in sdhci.c that will disable
|
|
* 3.3V SDHCI signaling, which happens to be not really
|
|
* supported on the Xperia Nile/Ganges platform.
|
|
*/
|
|
regulator-min-microvolt = <1648000>;
|
|
regulator-max-microvolt = <2696000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l3b_3p0: l3 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-min-microamp = <200>;
|
|
regulator-max-microamp = <600000>;
|
|
regulator-system-load = <100000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l4b_2p95: l4 {
|
|
regulator-min-microvolt = <2944000>;
|
|
regulator-max-microvolt = <2952000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
|
|
regulator-min-microamp = <200>;
|
|
regulator-max-microamp = <600000>;
|
|
regulator-system-load = <570000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
/*
|
|
* Downstream specifies a range of 1721-3600mV,
|
|
* but the only assigned consumers are SDHCI2 VMMC
|
|
* and Coresight QPDI that both request pinned 2.95V.
|
|
* Tighten the range to 1.8-3.328 (closest to 3.3) to
|
|
* make the mmc driver happy.
|
|
*/
|
|
vreg_l5b_2p95: l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3328000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <800000>;
|
|
};
|
|
|
|
vreg_l6b_3p3: l6 {
|
|
regulator-min-microvolt = <1704000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l7b_3p125: l7 {
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <3128000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l8b_3p3: l8 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
/* L9B (870mV) is currently unused */
|
|
/* L10B (915mV) is currently unused */
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3304000>;
|
|
regulator-max-microvolt = <3624000>;
|
|
regulator-enable-ramp-delay = <500>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,rpm-pm660-regulators";
|
|
|
|
vdd_s1-supply = <&vph_pwr>;
|
|
vdd_s2-supply = <&vph_pwr>;
|
|
vdd_s3-supply = <&vph_pwr>;
|
|
vdd_s4-supply = <&vph_pwr>;
|
|
vdd_s5-supply = <&vph_pwr>;
|
|
vdd_s6-supply = <&vph_pwr>;
|
|
|
|
vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
|
|
vdd_l2_l3-supply = <&vreg_s2b_1p05>;
|
|
vdd_l5-supply = <&vreg_s2b_1p05>;
|
|
vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
|
|
vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
|
|
|
|
/*
|
|
* S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
|
|
* by the Core Power Reduction hardened (CPRh) and the
|
|
* Operating State Manager (OSM) HW automatically.
|
|
*/
|
|
|
|
vreg_s4a_2p04: s4 {
|
|
regulator-min-microvolt = <2040000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_s5a_1p35: s5 {
|
|
regulator-min-microvolt = <1224000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_s6a_0p87: s6 {
|
|
regulator-min-microvolt = <504000>;
|
|
regulator-max-microvolt = <992000>;
|
|
regulator-enable-ramp-delay = <150>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
/* LDOs */
|
|
vreg_l1a_1p225: l1 {
|
|
regulator-min-microvolt = <1226000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l2a_1p0: l2 {
|
|
regulator-min-microvolt = <944000>;
|
|
regulator-max-microvolt = <1008000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l3a_1p0: l3 {
|
|
regulator-min-microvolt = <944000>;
|
|
regulator-max-microvolt = <1008000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l5a_0p848: l5 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <952000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l6a_1p3: l6 {
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1368000>;
|
|
regulator-allow-set-load;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l7a_1p2: l7 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l8a_1p8: l8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-system-load = <325000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l9a_1p8: l9 {
|
|
regulator-min-microvolt = <1804000>;
|
|
regulator-max-microvolt = <1896000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l10a_1p8: l10 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1944000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l11a_1p8: l11 {
|
|
regulator-min-microvolt = <1784000>;
|
|
regulator-max-microvolt = <1944000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l12a_1p8: l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1944000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
/* This gives power to the LPDDR4: never turn it off! */
|
|
vreg_l13a_1p8: l13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1944000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_l14a_1p8: l14 {
|
|
regulator-min-microvolt = <1710000>;
|
|
regulator-max-microvolt = <1904000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l15a_1p8: l15 {
|
|
regulator-min-microvolt = <1648000>;
|
|
regulator-max-microvolt = <2952000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
/* L16A (2.70V) is unused */
|
|
|
|
vreg_l17a_1p8: l17 {
|
|
regulator-min-microvolt = <1648000>;
|
|
regulator-max-microvolt = <2952000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
};
|
|
|
|
vreg_l18a_1v8: l18 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <10>;
|
|
regulator-min-microamp = <200>;
|
|
regulator-max-microamp = <50000>;
|
|
regulator-system-load = <10000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
vreg_l19a_3p3: l19 {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
regulator-ramp-delay = <0>;
|
|
regulator-allow-set-load;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdc2_state_on {
|
|
sd-cd-pins {
|
|
pins = "gpio54";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
&sdc2_state_off {
|
|
sd-cd-pins {
|
|
pins = "gpio54";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "okay";
|
|
supports-cqe;
|
|
|
|
/* SoMC Nile platform's eMMC doesn't support HS200 mode */
|
|
mmc-ddr-1_8v;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
|
|
vmmc-supply = <&vreg_l4b_2p95>;
|
|
vqmmc-supply = <&vreg_l8a_1p8>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&vreg_l5b_2p95>;
|
|
vqmmc-supply = <&vreg_l2b_2p95>;
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <8 4>;
|
|
|
|
ts_int_active: ts-int-active-state {
|
|
pins = "gpio45";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
ts_lcd_id_active: ts-lcd-id-active-state {
|
|
pins = "gpio56";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
imx300_vana_default: imx300-vana-default-state {
|
|
pins = "gpio50";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
imx219_vana_default: imx219-vana-default-state {
|
|
pins = "gpio51";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
cam_vdig_default: cam-vdig-default-state {
|
|
pins = "gpio52";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
&usb3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_dwc3 {
|
|
dr_mode = "peripheral";
|
|
extcon = <&extcon_usb>;
|
|
};
|